GASKET

GASKET
GASKET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
This item has been approved by the Packaging Supervisor/ Packaging Lead to manually exclude from the First Destination Packaging (FDP) Program.
These items are not candidates for Standard Commercial Packaging. MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-G-24748A REVISION NR A DTD 01/12/1994 PART PIECE NUMBER: M24748-EPM0.500
SPE7L0-26-T-0437
SECTION B
PR: 7015994952 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015994952 0001 EA 126.000
NSN/MATERIAL:5330014335891
DELIVERY (IN DAYS):0006
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
Type I
Please inspect to insure that the gasket thickness measurement applies to the metallic strip portion of the gasket and does not include the filler material, which may protrude slightly. Type I gaskets shall not be supplied with outside or inside metal rings.
The end of the terminal plies shall be spot welded to the adjacent plies with a minimum of two terminal spot welds. The first terminal spot weld shall be not greater than 1/4 inch from the end of the terminal ply. The second terminal spot weld shall be not greater than 3/4 inch from the first terminal spot weld measured along the perimeter. Additional spot welds shall be located on the gasket ID such that the total number of spot welds on the terminal ply, shall be not less than 3 and spaced at 3 inches maximum spacing along the perimeter between the adjacent spot welds in either direction.
Each Type I gasket should be individually identified with a sturdy paper tag, and the tag shall contain the information listed in paragraph 3.4.1 of MIL-G-24716.
Equipment manufacturer's name Type of equipment and model number Equipment part number of gasket
SPE7L0-26-T-0437
SECTION B
PR: 7015994952 PRLI: 0001 CONT’D
Part or identifying number (PIN) Material of construction, or class Gasket manufacturer's name Customer's order number Any additional information required to clearly identify the end use of the gasket
NOTE: Items 1, 2, and 3 are not required if 4 is provided Class A Type II
Due to the abundance of Quality Deficiency Reports received for spiral wound gaskets, source inspection is invoked on this contract. Paragraph 4.5 of MIL-G-24716A states that unless otherwise specified, a test report shall be furnished with each lot of material offered for acceptance. The test report shall include the results of the visual <(>,<)> dimensional, workmanship, marking, and refill sliding fit examinations; visual examination of spot welds; compression load tests; and the alloy identity test. Qualitative results of nondestructive tests shall be recorded in the test report. TYPE II gaskets shall be compatible with ANSI B16.5
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/15/2026 Original Required Delivery Date:08/31/2026
SPE7L0-26-T-0437 NSN/Part Number: 5330-01-433-5891 Quantity: 126 EA Purchase Request: 7015994952QTY: 126 Delivery: 6 days ADO