Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE7L1-26-T-911DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one gasket with NSN/Part Number 5330-01-311-9345 under solicitation SPE7L1-26-T-911D, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order. The item is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited in the manufacture or incorporation of the gasket, and any substitute materials must be submitted for approval unless explicitly authorized by specification requirements. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by a DLA-recognized third-party assessment organization, as the item involves covered defense information. Technical data associated with the gasket is subject to export controls under either ITAR or EAR, and disclosure to foreign persons, including foreign nationals within the U.S., is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and formal approval from DLA. The place of performance is Huntsville, Alabama, and primary point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.

General Info

Procure one gasket NSN 5330-01-311-9345, CMMC Level 2 certified, no ozone-depleting chemicals, export-controlled, delivery in 20 days, Huntsville, Alabama.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

115 ELECTRONICS CIRCLE, HUNTSVILLE, AL, 35824-0000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-911D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5330-01-311-9345 Quantity: 1 EA Purchase Request: 7017727188QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
SCREW, EXTERNALLY RELIE
Solicitation # SPE4A6-26-T-11ZH
The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913H
The contract pertains to the procurement of a single gasket with National Stock Number 5330-12-322-7856 and part number 5550740780, to be delivered in one unit under solicitation SPE7L1-26-T-913H. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, particularly due to its use in Federal Supply Classes 5330/5331. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry preservation and cushioning material JB, and markings must comply with MIL-STD-129, including the special shelf-life code 32. The gasket is explicitly exempt from asbestos under FED-STD-313, and multiple manufacturer part numbers are acceptable as listed. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery window is twenty days from the award date, with an original required delivery date of July 31, 2026, and shipping must be by the fastest traceable means, excluding parcel post, to the designated FPO address via Vessel Shipment RDD 777. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or amendment date. Government use identifiers and shipping codes are provided for logistics tracking, and the primary point of contact is Kristina Derry at DLA Land and Maritime.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK
Solicitation # SPE4A7-26-R-0713
The contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336411
New
DIBBS
TURBINE WHEEL, AIRCR
Solicitation # SPE4A5-26-T-321G
The contract is for the procurement of 30 turbine wheels for aircraft applications, identified by part number 205424 and NSN 1660-00-594-7233, sourced from Honeywell International Inc. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications. Compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization is mandatory, with all packaging subject to DLA’s overarching requirements. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per critical, major, and minor characteristics. Delivery is scheduled for 739 days after award, with FOB origin shipment terms and inspection and acceptance occurring at destination. The unit of issue is each, with no variance permitted in quantity. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the need ship date is August 21, 2028, with an original required delivery date of November 1, 2028. Cybersecurity requirements include CMMC Level 2 self-assessment, and the contractor must comply with all applicable defense information handling standards. The item is not required to carry Unique Identification under DFARS 252.211-7003, as specified by the service customer. The contract was issued under solicitation SPE4A5-26-T-321G, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-326T
This contract specifies the procurement of a metallic disc valve, identified by part number 2284W225 and NSN 1660997394942, with a quantity of 14 units. The item is subject to technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with sampling protocols per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization must follow DLA packaging requirements and be grouped in lots of 200 per intermediate container. The valve is to be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Cybersecurity requirements include CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Unit of issue is each, and the contract includes transportation directives referencing DLAD procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336411, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-911M
The contract pertains to a single gasket item identified by NSN 5330-01-313-3578, with a required delivery within 20 days of award, and is classified as a commercial item including commercial of a type. It is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date. The gasket must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval per Clause L30 and Provision 4 conditions. The contractor must be CMMC Level 2 certified through a qualified third-party assessment organization, and all items must comply with MIL-STD-130N for identification marking of U.S. military property. Government identification must be removed from non-accepted supplies, and covered defense information handling is required. The solicitation, issued under SPE7L1-26-T-911M, has a response deadline of August 17, 2026, and performance is to occur in Huntsville, Alabama, with Kristina Derry listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE ASSEMBLY
Solicitation # SPE4A5-26-T-326P
The contract specifies the procurement of a BODY, VALVE ASSEMBLY with part number 2515W750 and NSN 1660995356040, requiring three units to be delivered FOB origin within 171 days, with a required ship date of January 31, 2027, and original delivery deadline of November 12, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. The item is not subject to Unit Unique Identification per DFARS 252.211-7003(c)(1)(i), and physical marking must follow RQ017. Acceptance occurs at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all materials must adhere to DLA’s procurement and transportation directives including freight shipping to the DDSP New Cumberland Facility in Pennsylvania. The contract enforces a strict 0% variance on quantity and specifies inspection and acceptance points at the destination, with unit of issue as individual units and pricing set at $3.00 per unit.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Onboarding of Group 3 UAS
Solicitation # W58RGZ-26-S-C001-0008
The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories
Solicitation # W58RGZ-26-S-C001-0007
The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
HH-60W Degraded Visual Environment System(DVES) - FA8552-26-R-B001
Solicitation # FA8552-26-R-B001
The United States Air Force is seeking a system to mitigate the risks associated with Degraded Visual Environments (DVE) for the HH-60W Jolly Green II helicopter, requiring a comprehensive solution that detects hazards in real time during both enroute and terminal phases of flight. This system must function reliably across diverse challenging conditions such as smoke, smog, snow, nighttime sand or dust storms, and aircraft-induced brownout and whiteout scenarios, delivering clear, actionable data to cockpit and cabin displays to enhance situational awareness and safety. The effort encompasses the full lifecycle of the Degraded Visual Environment System (DVES), including design, development, testing, integration, procurement, installation, and deployment of the required hardware and software kits, along with all non-recurring engineering necessary to adapt the system to the HH-60W platform. The contract will be structured with a 24-month base period and the potential to activate up to five additional ordering periods, creating a maximum possible duration of eight years. The solicitation, identified as FA8552-26-R-B001, was posted on June 23, 2026, with proposals due by July 15, 2026. It falls under NAICS code 336411 for aircraft manufacturing and carries no set-aside designation, representing an open competition. The contract office is located at Robins Air Force Base in Georgia, with primary point of contact Theresa Younce and secondary contact Millie Danko available for inquiries. Performance is expected to support Air Force operations globally, with the system intended to significantly improve operational capability and crew safety under adverse visual conditions.
FA8552 Aflcmc Wiu

POSTED

about 8 hours ago

DEADLINE

in 2 months
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-863J
The contract solicitation SPE7L1-26-T-863J seeks the procurement of six gaskets with NSN 5330-00-614-8048, to be delivered to the U.S. Coast Guard Air Station Barber’s Point in Kapolei, HI, within 20 days of award. The item must comply with strict packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, and adherence to special marking code 20 for “Do not bend.” The gasket must be free of asbestos as defined in FED-STD-313, and all hazardous materials must be labeled in accordance with 29 CFR 1910.1200, unless exempted under specified federal statutes. Barcoding per MIL-STD-129 is mandatory for all shipments, and palletization must follow DLA’s RP001 Packaging Requirements. Inspection and acceptance will occur at destination under FAR 52.246-2, with the government retaining authority to reject nonconforming items. The contract mandates compliance with multiple DFARS and FAR clauses, including cybersecurity requirements under NIST SP 800-171, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and obligations related to trafficking in persons, employment eligibility, and whistleblower rights. Offerors must be registered in SAM with a valid UEI and CAGE code, and must declare their small business status and socioeconomic classifications if applicable. All proposals must be submitted electronically via DIBBS by August 6, 2026, and any award will require electronic invoicing through WAWF. The contract type is not explicitly stated but is presumed to be fixed-price, consistent with DLA’s simplified acquisition procedures. No pricing data is available in the solicitation, as unit cost and total value will be determined post-award.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336411
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7L4-26-T-5783
The contract pertains to the procurement of a bevel gear with NSN 3020-01-393-5320 and part number 50006-1, supplied by MORPAC INDUSTRIES, INC, under solicitation SPE7L4-26-T-5783. A total of 19 units are required at a unit price of $19.00, resulting in a total contract value of $361.00. Delivery is scheduled for 168 days after order placement, with a need ship date of January 19, 2027, and an original required delivery date of November 29, 2026. All items must be delivered FOB origin to DLA San Joaquin in Tracy, CA, and are subject to inspection and acceptance at the destination. The gear must comply with DLA’s technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with any revisions in effect on the solicitation issue date controlling for this simplified acquisition. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted, such as in functional batteries, fluorescent lamps, sensors, controls, weapon systems, or naval chemical reagents, with exempted items requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods, materials, container types, and packaging codes, while marking must follow MIL-STD-129, including barcoding and special marking code 00-00 indicating no additional requirements. Palletization must meet DLA Packaging Requirements for Procurement RP001. The contract incorporates numerous Federal Acquisition Regulation clauses related to employment equity, trafficking in persons, hazardous material identification, sustainable products, electronic verification, and cybersecurity assessments per NIST SP 800-171, as well as transportation, subcontracting, safety notifications, and whistleblower rights. Compliance with hazard communication standards (29 CFR 1910.1200) is mandatory, and offerors must submit Safety Data Sheets and certify their size status and socioeconomic classification, including UEI and CAGE codes if applicable. All proposals must be submitted electronically via DIBBS by the August 6, 2026 deadline, and payment will be processed through Wide Area WorkFlow using DD Form 1
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-912N
The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE7L1-26-T-910S
The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-911E
The contract pertains to the procurement of one unit of a COVER, ACCESS item identified by NSN 5340-01-260-9890, with a delivery requirement of 10 days after award. The solicitation, issued under number SPE7L1-26-T-911E, is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. This is a PRI QML-restricted item, limiting award exclusively to accredited manufacturers or distributors listed on the current PRI QML, with distributors required to offer products from accredited manufacturers. Prior to award, the buyer must verify the vendor’s accreditation status and retain a dated copy of the PRI QML in the contract file. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details