Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE7L3-26-T-145HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three gaskets identified by NSN 5330-00-020-4688 under solicitation SPE7L3-26-T-145H, with a delivery requirement of 65 days after order. This is a restricted-source item requiring formal engineering source approval from the government design control activity, and any configuration changes must be submitted via an Engineering Change Proposal for variance or waiver. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandated, and all items must be free of asbestos; any alternative materials require approval under Clause L30 and Provision 4 conditions. The gaskets must be packaged in a medium duty, waterproof, greaseproof, and opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments due to UV sensitivity of related stock numbers. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and covered defense information protocols apply. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. The point of contact is Amber Rohly, reachable via email and phone, and performance is designated for New Cumberland, Pennsylvania, with the contract issued under NAICS code 339991 by the Department of Defense’s Land Supplier Opns Vehicle Spt.

General Info

Procure three NSN 5330-00-020-4688 gaskets, 65-day delivery, no asbestos, MIL-STD-130N, CMMC Level 2, approved sources only.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-145H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Amber Rohly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
RD002, COVERED DEFENSE INFORMATION APPLIES
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-00-020-4688 Quantity: 3 EA Purchase Request: 7013467167QTY: 3 Delivery: 65 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L1-26-T-907C
The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9140
The contract pertains to the procurement of 2,907 units of SEAL, PLAIN ENCASED under solicitation SPE7LX-26-U-9140, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 57 days after order, and the item is identified by NSN 5330-01-481-0888. All items must be free of asbestos, and any alternatives must comply with Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List, with revisions governed by the solicitation issue date for simplified acquisitions or amendment date if changed. Covered defense information provisions apply, and government identification must be removed from non-accepted supplies per RQ011. Packaging requirements are dictated by DLA standards, and all deliveries must meet these specifications regardless of shipment type. The point of contact is Theodore Misiolek, reachable via phone and email, with responses due by August 18, 2026, and the solicitation posted on August 3, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-T-145R
The contract is for a Parts Kit, Seal Replacement, identified by NSN 5330-01-698-6493, with a quantity of one unit and a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-145R, issued by the Department of Defense's Land Supplier Operations Vehicle Support agency, with performance required in San Diego, California, 92136-3581. All materials must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract prohibits the use of class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, and chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier as specified by NAVSEA 5100-003D. Asbestos is strictly forbidden in all supplied items, and any alternatives require formal approval under Clause L30 and Provision 4 conditions. Government identification must be removed from non-accepted supplies, and all packaging must meet DLA procurement requirements. The solicitation closes on August 14, 2026, with Susan Diamond as the primary point of contact via email and phone.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL KIT
Solicitation # SPE7L3-26-Q-1248
The contract pertains to the procurement of a SEAL KIT under solicitation number SPE7L3-26-Q-1248, with a required quantity of 124 kits, delivered under a firm fixed price structure and zero variance allowance. Delivery is mandated within 90 days after order award, with inspection and acceptance occurring at the destination point, and FOB terms set at origin. The item is identified by NSN 5330-01-178-6210 and classified as a critical application item, subject to stringent quality and configuration controls referencing the DLA Master List of Technical and Quality Requirements. Packaging and preservation must conform to MIL-STD-2073-1E, Appendix D, for kits, with marking per MIL-STD-129 and palletization in accordance with DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instrumentation, weapon systems, or authorized chemical reagents, with any permitted mercury-containing items requiring shock-proof design and secondary containment. Asbestos is entirely forbidden. Sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per specified criticality. The item does not require Unique Identification per customer request, and all technical and quality specifications referenced are governed by the DLA Master List revision effective as of the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and pricing, terms, and logistics align with DoD unit-of-issue standards and transportation protocols outlined in DLAD procedural notes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9145
This contract specifies the procurement of an O-ring item identified by NSN 5331-01-479-0634 with a total quantity of 141 handling units, subject to a strict delivery timeline of 73 days under FOB origin terms, with no variance allowed in quantity. The item is classified as a critical application component with a non-extendable shelf life of 180 months under Type I (Code Y) requirements and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1 using medium duty, waterproof, greaseproof, opaque bags to protect against UV degradation. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating shelf-life compliance. The item is prohibited from containing asbestos as defined by FED-STD-313 and must not come into direct contact with mercury or mercury-containing compounds except for approved functional uses such as batteries, instruments, or sensors specified by NAVSEA, with portable devices requiring shock-proof construction and a secondary containment barrier. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements. This solicitation is a total small business set-aside under NAICS code 339991, with the award made through DLA Direct, CONUS, and all deliveries must be made to the destination point for inspection and acceptance. The contract applies to direct vendor delivery, foreign military sales, and stock shipments, and the vendor must meet all packaging, labeling, and material restrictions outlined in DLA’s official directives.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-319X
The contract pertains to the supply of 1,180 O-RINGS with NSN 5331-01-026-5117 under solicitation SPE4A5-26-T-319X, with a delivery deadline of 128 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. The item is subject to stringent quality assurance protocols, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Attribute classifications for critical, major, and minor characteristics must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All supplies must adhere to DLA packaging rules, include proper physical marking, and undergo inspection and acceptance at the manufacturer’s facility. Export control restrictions apply as the technical data is governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to controlled data is restricted to contractors possessing valid US/Canada Joint Certification Program certification, completed DLA training, and formal approval. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. The Defense Information handling procedures and Cybersecurity Maturity Model Certification Level 2 requirements are enforced, with CMMC Level 2 certified third-party assessment organizations mandatorily involved. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is issued by the Department of Defense’s ASC Supplier Operations OEM Division, with performance expected at Jacksonville, Florida, and inquiries directed to Katelane Dillard.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L5-26-T-4739
This contract specifies the supply of 10 gaskets identified by NSN 5330-01-328-7643 and part number 1441016-1 from Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4739. The delivery is due within 141 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application and contains no asbestos as defined by FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact unless specifically exempted for functional components like batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Shipping must adhere to DLA distribution instructions, with the final delivery address at the New Cumberland, PA facility, and transportation details governed by DLAD procedural notes C19 and C20.
LAND SUPPLIER OPNS ENGINES

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906R
The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906X
This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7LX-26-U-9154
The contract solicitation SPE7LX-26-U-9154 calls for 112 nonmetallic seals, identified by NSN 5330-01-689-5259, under a total small business set-aside, with a response deadline of August 18, 2026, and delivery required within 97 days of award. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag complying with MIL-DTL-117, Type II, Class C, Style 1, due to the vulnerability of the associated stock numbers to ultraviolet degradation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with corresponding AQLs of 0.1, 1.0, and 4.0. The seal must be marked in accordance with MIL-STD-130N for U.S. military property identification, and any configuration changes require formal engineering change proposals. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access it. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and covered defense information provisions apply. Drawings are available exclusively during open solicitation via the DIBBS portal, and all work must be performed by a certified small business under NAICS code 339991.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-T-145N
The contract pertains to the procurement of 10 units of RETAINER, PACKING with NSN 5330-01-428-4042 under solicitation SPE7L3-26-T-145N, with a delivery deadline of 85 days after award. All items must comply with stringent packaging standards requiring medium duty, waterproof, greaseproof, and opaque bagging in accordance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against UV degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any substitute materials must be approved per Clause L30 and Provision 4 conditions. Ozone-depleting chemicals are strictly prohibited, and mercury or mercury-containing compounds are banned except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. Components must originate from approved sources listed on Qualified Products Lists or Qualified Manufacturers Lists as defined in Procurement Note H02. All packaging must meet oxygen clean standards and proper marking requirements. The contract also mandates adherence to MIL-STD-130N for identification marking and incorporates technical and quality requirements from the DLA Master List, with revisions governed by solicitation issue or amendment dates. Configuration changes require formal engineering change proposals or variance requests, and source approval documentation is mandatory. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, with point of contact Amber Rohly at dla.flbb2prs@dla.mil.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906M
The contract pertains to the procurement of four gaskets, identified by NSN 5330-01-408-9660 and part number PL 8.0SLV-9 REV A-65C, supplied by Buffalo Pumps Inc. of North Tonawanda, NY. The item must comply with stringent material restrictions, including a complete prohibition of asbestos as defined in Fed-Std-313 and the intentional exclusion of mercury or mercury-containing compounds from direct contact with the hardware, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The solicitation number is SPE7L1-26-T-906M, posted on August 3, 2026, with responses due by August 14, 2026, and delivery is required within five days of award. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. The place of performance is listed as FPO, ZIP 09532, and the NAICS code is 339991.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336211
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-Q-1247
The contract is for the procurement of 47 units of a door, hatch, or vehicle component manufactured through a metal casting process, requiring specialized tooling for production. The item is classified as a ballistic item, necessitating a first article test and a Certificate of Quality Conformance in accordance with SQAP013408919. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to DLA packaging standards and strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; alternative chemicals must be submitted for approval unless explicitly authorized. This is a total small business set-aside under NAICS code 336211 with full and open competition among qualified small businesses. The contract involves export-controlled technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved authorization from DLA. Packaging and handling must comply with DLA standards, and any non-accepted supplies must have government identification removed. The delivery timeline is 184 days after order, with the solicitation closing on August 18, 2026, and the point of contact for inquiries is McKenzie Biniker of the Department of Defense’s Land Supplier Operations Vehicle Support.
Motor Vehicle Body Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 213113
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145G
The contract pertains to the supply of a gasket identified by NSN 5330-01-516-2090, with a quantity of 182 units, under solicitation SPE7L3-26-T-145G, which was posted on August 3, 2026, and requires responses by August 14, 2026. Delivery is due within 102 days after award, and the place of performance is Tracy, California, with a zip code of 95304-5000. The contract falls under NAICS code 213113 and is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, sensors, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary as per NAVSEA 5100-003D. For items classified under Federal Supply Classes 5330 and 5331, which are susceptible to UV degradation, the gasket must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and this packaging standard applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size.
Support Activities for Coal Mining

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336330
New
DIBBS
TIE ROD END, STEERIN
Solicitation # SPE7L3-26-T-145S
This contract requires the supply of 16 tie rod ends, part number 145011044ENP20 with NSN 2530-01-644-3342, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must be delivered within 94 days of contract award with no variance in quantity, delivered FOB origin, and inspected and accepted at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including the use of die-cut JC cushioning material to immobilize each tie rod end within its container, ensuring no movement occurs during transit. Each unit must feature non-corrosive plastic caps over rubber boots to protect seals, and any damage to these caps or seals constitutes a failure requiring return of the shipment. The packaging must adhere to MIL-STD-129 marking standards with special marking code ZZ, including arrow-up and open-this-side indicators, and must prohibit the use of ozone-depleting chemicals, mercury, and mercury compounds. Corrugated fiberboard used for blocking and bracing must meet ASTM-D4727 standards for weather resistance, with load-bearing capacity determined by flute type as specified in Table II. Preservation requires all bare metal surfaces to be properly preserved and moving parts lubricated using approved methods, with individual packaging for each unit. The contract explicitly mandates compliance with the DLA Master List of Technical and Quality Requirements referenced on the DLA website, and hazardous material status must be confirmed by the manufacturer prior to award. The required delivery date is April 28, 2027, with a need ship date of November 17, 2026.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
ACTUATOR, ELECTROMECHAN
Solicitation # SPE7L3-26-T-145P
The contract specifies the procurement of two electromechanical rotary actuators, part number 12273-S727-300, manufactured by Curtiss-Wright Flow Control Corporation, with NSN 3010-01-561-3698. The units are to be delivered FOB origin within 358 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including preservative methods, unit container type D3, and intermediate containment per specified standards. Marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA packaging requirements. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract references technical and quality standards from the DLA Master List, with revisions controlled by the solicitation issue date. The solicitation number is SPE7L3-26-T-145P, issued on August 3, 2026, with responses due by August 14, 2026. The original required delivery date was October 14, 2026, though the need ship date is set for August 8, 2027. The point of contact for inquiries is Karen McCarley, and the NAICS code is 336350.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145L
The contract is for the supply of four gaskets identified by NSN 5330-01-115-9727 under solicitation SPE7L3-26-T-145L, with a requirement for delivery within 90 days of award. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified third-party assessment organization, ensuring compliance with stringent federal cybersecurity standards. The contract incorporates technical and quality requirements from the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. All items must adhere to MIL-STD-130N for identification marking and be packaged in a medium-duty, waterproof, greaseproof, opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any substitution requires approval under clause L30 and provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; in such cases, portable devices must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The place of performance is Corpus Christi, Texas, with the Department of Defense’s Land Supplier Operations Vehicle Support as the contracting office, and Amber Rohly identified as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-145Q
This contract pertains to the procurement of preformed packing items with a National Stock Number of 5330-00-954-6240 and a quantity of 88 units, to be delivered within 173 days to Hill Air Force Base, Utah, under solicitation SPE7L3-26-T-145Q. The item is classified as a critical application product with a non-extendable shelf life of 60 months and must comply with strict packaging standards including MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation and environmental contamination. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special labeling for Type I shelf-life items, and the entire shipment must use medium duty, waterproof, greaseproof, and opaque barriers. The item is subject to hazardous materials shipping protocols and is prohibited from containing asbestos or intentionally added mercury, except for specific functional uses in batteries, lights, sensors, instruments, weapon systems, or chemical reagents authorized by NAVSEA, with additional containment requirements for portable mercury-containing items per NAVSEA 5100-003D. Delivery is FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Only approved vendors listed—DANFOSS FLUID POWER INC, GORIZIANE GROUP SPA, and TIFFIN PARTS, L.L.C.—may supply the item, and all documentation must comply with DLA’s Master List of Technical and Quality Requirements as referenced by R and I numbers. The contract includes detailed logistical and compliance instructions for direct vendor delivery, foreign military sales, and stock shipments, with specific transport and shipping information provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-Q-1253
This contract specifies the procurement of 84 units of preformed packing, identified by NSN 5330-01-669-4601, under contract SPE7L3-26-Q-1253, with a firm fixed price and zero variance in quantity. The item is classified as a commercial off-the-shelf (COTS) product and must meet stringent federal aviation administration (FAA) airworthiness standards, including bare item marking requirements and preservation, packaging, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. It is designated as a critical application item with a non-extendable shelf life of 180 months, requiring Type I (Code Y) labeling. Sampling must comply with MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs as defined. The contractor must retain full supply chain traceability documentation per DLA Directive Procurement Note C03 and manage configuration changes through engineering change proposals. Packaging must adhere to DLA requirements, including palletization and special marking for shelf life, and delivery is FOB origin with inspection and acceptance occurring at destination within 120 days after order date. The item is not acceptable as surplus and must be delivered to the designated DLA distribution facility in New Cumberland, Pennsylvania.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-T-145J
The contract pertains to the procurement of retainer, packing items under solicitation SPE7L3-26-T-145J, with a total quantity of 43 units divided into two line items of 3 and 40 units respectively. The item, identified by NSN 5330-00-758-0791 and part number 55-1105, is classified as a critical application item and must comply with stringent packaging standards requiring medium duty, waterproof, greaseproof, and opaque packaging in accordance with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging requirements. Delivery is scheduled for 144 days after contract award, with FOB origin terms, no quantity variance allowed, and inspection and acceptance occurring at the destination. The items are destined for two locations: DLA Distribution Red River in Texarkana, TX, and DLA Distribution Depot Hill in Hill AFB, UT. The use of Class I ozone-depleting chemicals is strictly prohibited, and all substitutes require approval unless explicitly authorized by specification. Item Unique Identification is not required per the service customer’s request, and Covered Defense Information provisions may apply. All technical and quality requirements referenced in the DLA Master List are incorporated by reference, with the applicable revision determined by the solicitation or award date. The contract is issued under DoD unit of issue, with a need ship date of March 24, 2026, and an original required delivery date of June 5, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145K
The contract pertains to the procurement of 404 units of a gasket identified by NSN 5330-00-318-1956 under solicitation SPE7L3-26-T-145K, with a response deadline of August 14, 2026, and a required delivery within 50 days after award. The item is classified as a commercial off-the-shelf (COTS) product and must comply with mandatory technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Strict prohibitions apply to the use of class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The gasket must also be entirely free of asbestos, with any alternative materials requiring formal approval under Clause L30 and Provision 4 conditions. Performance is to be delivered to Jacksonville, Florida, 32212-0103, and inquiries should be directed to Amber Rohly at DLA through the provided contact information.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details