Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE7L3-26-T-168FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation identifies a requirement for 434 units of a gasket, identified by NSN 5330-01-073-0036, to be delivered within 165 days of award. The item must comply with stringent technical and quality standards, including MIL-STD-130N for identification marking of U.S. military property and must be packaged in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gasket must have 31 months of shelf life remaining upon delivery to the government depot, and all items must be free of asbestos with any alternatives requiring approval under Clause L30 and Provision 4 conditions. The contract incorporates cybersecurity requirements under the CMMC Level 2 framework for third-party assessment organizations and references technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The solicitation, issued under contract number SPE7L3-26-T-168F on August 9, 2026, with a response deadline of August 20, 2026, is classified under NAICS code 336411 and falls under the Department of Defense’s Land Supplier Ops Vehicle Support organization. The place of performance is Tracy, California, with a ZIP code of 95304-5000, and the primary point of contact is Susan Diamond at the DLA email and phone provided. The contract emphasizes compliance with federal packaging specifications, shelf-life preservation, and environmental safety standards while mandating adherence to DLA’s overarching technical and quality requirements for procurement, as outlined in the referenced master lists and standards.

General Info

434 gaskets, NSN 5330-01-073-0036, due in 165 days, must meet MIL standards, 31-month shelf life, no asbestos, CMMC Level 2.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-168F for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
ALL ITEMS WITH A SHELF-LIFE SHALL HAVE 85%/EIGHTY-FIVE PERCENT OF THE
STATED SHELF LIFE REMAINING AT TIME OF DELIVERY TO THE GOVERNMENT DEPOT.
THIS ITEM SHALL HAVE 31 MONTHS OF SHELF LIFE REMAINING UPON DELIVERY TO
THE GOVERNMENT DEPOT.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-073-0036 Quantity: 434 EA Purchase Request: 7017774279QTY: 434 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
Aircraft Seat Component Supply (Commercial Off-The-Shelf)The contract seeks the supply of ten commercial off-the-shelf aircraft seat armrests identified by part number 1A458-0586AP and NSN 1680992175711, with delivery terms set at FOB origin, meaning the buyer assumes responsibility for the goods once they leave the supplier’s location. The item is classified under NAICS code 336411, indicating it falls within the aerospace product and parts manufacturing sector, and is specifically designated as a total small business set-aside under FAR 19.5, ensuring only small business concerns are eligible to bid. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of August 17, 2026, and the place of performance is tied to Tinker Air Force Base with a zip code of 73145-8000, pointing to the eventual operational or logistical destination for the components. This is structured as a subcontract under the broader defense supply chain, focusing on pre-manufactured, non-customized parts essential for commercial aircraft seating systems.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
Commercial Off-the-Shelf (COTS) Component Supply – Pressure BellowsThe contract encompasses the supply of a commercial off-the-shelf pressure bellows identified by NSN 1660007834066, required to meet stringent military specifications for performance, packaging, marking, and hazardous materials handling. The component is intended for delivery to DLA Distribution Cherry Point, North Carolina, with strict adherence to all applicable defense logistics standards. The item falls under NAICS code 336411, indicating its classification within the aircraft and parts manufacturing sector, and is being procured under a subcontract arrangement through the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. All deliverables must comply with federal regulations governing military-grade components, including proper labeling, containment, and documentation for hazardous materials if applicable. Responses must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 9, 2026. The place of performance is specifically designated as Cherry Point, NC, with a zip code of 28533-5040, and while the full office address is not provided, the delivery location is clearly defined. There is no set-aside designation specified, meaning the opportunity is open to all qualified vendors without preference. Bidders are expected to ensure full compliance with military standards for the pressure bellows, including certification of conformance and traceability of materials, as the component supports critical defense systems. Technical and logistical accuracy is paramount, and failure to meet specifications may result in rejection or non-payment. All communication and submission must align with the DIBBS portal linked in the contract notice.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
Aircraft Access Door ManufacturingThe contract requires the manufacture of aircraft access doors in specific configurations as defined by technical drawings and Defense Logistics Agency requirements, encompassing all phases from fabrication and assembly to testing and packaging. The work must adhere to rigorous standards to ensure compliance with military specifications and operational readiness. This is a subcontract under a Women-Owned Small Business Set-Aside, designated under NAICS code 336411, which restricts eligibility to qualified women-owned small businesses. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and the place of performance is designated as Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though no point of contact details are provided. All work must be completed in accordance with DLA directives and delivered to meet the outlined technical and logistical requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
ROLLER RETAINER, GEA
Solicitation # SPE4A7-26-T-634K
The contract is for the procurement of 23 units of a Roller Retainer, GEA, identified by NSN 1615-01-090-5922, under solicitation SPE4A7-26-T-634K. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on the acquisition size. The technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons regardless of location, and mandates prior authorization from the Department of State or Commerce. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Packaging must adhere to DLA specifications, inspections are to occur at origin, and government identification must be removed from rejected items. The delivery requirement is 82 days after award, with performance located in New Cumberland, Pennsylvania, under the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-T-634T
The contract is for four aircraft stiffeners with NSN 1560-01-467-5640, solicited under SPE4A7-26-T-634T with a response deadline of August 17, 2026, and a delivery requirement of 646 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless revised by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. The place of performance is Robins AFB, Georgia, and the contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division with primary point of contact April Reed.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-169V
The contract specifies the procurement of 72 gaskets identified by NSN 5330-00-834-3384 under solicitation SPE7L3-26-T-169V, with a delivery deadline 138 days after award. All items must be free of asbestos, and any alternative materials require formal approval per Clause L30 and Provision 4 conditions. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet degradation. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must also comply with MIL-STD-130N for identification marking of U.S. military property, and Covered Defense Information provisions may apply. The contract is managed by the Department of Defense under Land Supplier Ops Vehicle Support, with performance located in Cherry Point, North Carolina, and primary point of contact Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
BELLOWS, PRESSURE
Solicitation # SPE4A7-26-T-632N
This contract is for the procurement of one pressure bellows, part number 25614037, with NATO Stock Number 1660007834066, intended for critical application under the procurement reference SPE4A7-26-T-632N. The item must be manufactured by approved sources including Northrop Grumman Systems Corporation, Meggitt North Hollywood Inc, and Hamilton Sundstrand Corporation. Delivery is required FOB origin within 381 days from the contract award, with no variance allowed in quantity, and inspection and acceptance both occur at the manufacturer’s origin. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization follows DLA packaging guidelines, and the final delivery address is DLA Distribution Cherry Point in North Carolina. The contract mandates compliance with a suite of technical, quality, and cybersecurity requirements referenced through R and I numbers from the DLA Master List, including CMMC Level 2 self-assessment, configuration change management, and tailored higher-level quality requirements. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with critical attributes requiring zero non-conformances. Unit of issue is each, and the contract includes mandatory reporting, inspection, and documentation provisions under RQ001, RQ009, RQ011, RQ017, and RT001. Item Unique Identification is not required per the service customer’s directive, consistent with DFARS 252.211-7003(c)(1)(i). The solicitation was issued August 9, 2026, with responses due by August 17, 2026, and the NAICS code is 336411 for aircraft and parts manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
Federal
Repair of NIIN 011589678; NOMEN: BLADE,ROTARY RUDDER
Solicitation # N0038326QF166
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source repair contract to Sikorsky for six rotary rudder blades, part number 70101-31000-046, with NSN 7R1615011589678, under NAICS code 336411 and FSC 1615. No technical drawings or data are available to the government, and it does not hold the rights to the intellectual property necessary to source this component from any other supplier. The acquisition is justified under 10 U.S.C. 3204(a)(1) and FAR 6.302, as Sikorsky is the only responsible source capable of performing the repair, and no alternative supplies or services meet the agency’s operational needs. Any firm not previously approved to manufacture this item must submit a Source Approval Request, but the repair schedule will not be extended to accommodate approval processing. The government intends to use FAR Part 15 procedures, not the commercial item acquisition policies under FAR Part 12, based on market research findings. While the notice is not a formal request for proposals, all responses submitted within 45 days of the synopsis date will be evaluated solely to confirm the necessity of sole-source procurement. The procurement is not set aside for small businesses, will be conducted electronically via NECO, and no phone requests or hard-copy submissions will be accepted. Interested parties must submit capability statements via email to the designated point of contact, Anna Kiessling.
Navsup Weapon Systems Support

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 336411
New
Federal
Unmanned Aerial System (UAS) with Aerial Ignition Capabilities UAS
Solicitation # W911S226U3993
The solicitation seeks a commercial-off-the-shelf unmanned aerial system branded as Alta X+ IGNIS, specifically engineered for aerial ignition operations in forestry and land management applications. The system must be fully compliant with NDAA and TAA regulations and must be listed on the Defense Innovation Unit’s Blue UAS Cleared List, a mandatory requirement for procurement consideration. It must deliver a minimum of 55 minutes of flight time without payload, maintain at least 10 minutes with a 35-pound load, and sustain 22 to 30 minutes while actively deploying ignition spheres. The UAS must operate reliably in extreme environmental conditions including temperatures from 40 to 105 degrees Fahrenheit, winds up to 15 meters per second, and humidity levels up to 90 percent non-condensing. The payload system must accurately deliver ignition spheres with built-in safety mechanisms, including a remote emergency jettison function, geo-fencing to restrict ignition to approved zones, and onboard sensors to monitor for obstructions or thermal anomalies. The aircraft must be equipped with a radiometric thermal camera with 640x512 pixel resolution at 30Hz and a Full HD optical camera with 10x optical zoom, supporting mission-critical monitoring and situational awareness. Navigation relies on centimeter-level GPS accuracy, with full autonomy through pre-programmed waypoints and manual control, all data transmitted over encrypted 2.4GHz frequencies. Mission planning software must accept standard geographic formats like KMZ and PDF. The deliverable package includes the UAS, ignition payload, ground control station, thermal and optical sensors, four flight batteries, dual chargers, battery transport cases, spare propellers, and a complete spare parts kit. The vendor must provide three days of training for up to five personnel, detailed maintenance documentation, and an annual care plan offering calibration, software updates, discounted repairs, and dedicated technical support. The contract is a Small Business Set Aside, managed by the Department of Defense at Fort Drum, with responses due by August 13, 2026.
W6QM Micc-Ft Drum

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336411
New
Federal
Unmanned Carrier-Based Aircraft Solutions Request for Information (RFI)
Solicitation # PAEA-UnmannedStratSS
The Naval Air Systems Command is seeking industry input through a Sources Sought notice for next-generation unmanned carrier-based aircraft to support the Naval Aviation Enterprise’s Air Wing of the Future strategy, aligned with the Golden Fleet initiative. The focus is on identifying capable industrial partners who can design, develop, prototype, manufacture, and field autonomous platforms optimized for deployment from Ford-class and Nimitz-class nuclear aircraft carriers. The desired solutions may include single-role, multi-role, or modular systems that integrate with existing Family of Systems such as the MQ-25A and Collaborative Combat Aircraft, with an emphasis on operational effectiveness, autonomy, and carrier compatibility. The government aims to use the information gathered to shape future requirements, investment priorities, and acquisition pathways for unmanned aviation capabilities. Responses must be submitted electronically by 5:00 PM EST on August 13, 2026, to the designated Navy mailbox with a copy to Contract Specialist Samantha Moore. Submissions are limited to ten pages using Times New Roman 12-point font and single spacing, with optional accompanying PowerPoint presentations not exceeding twenty slides and no video content. All information must remain unclassified. The solicitation, identified as PAEA-UnmannedStratSS, was posted on July 14, 2026, and is issued under NAICS code 336411. No set-aside provisions apply, and responses are welcome from all qualified industry entities. Point of contact for inquiries includes Samantha Moore and Jacob Leighton, with the office located at Naval Air Station Patuxent River, Maryland.
Naval Air Systems Command

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336411
New
Federal
Drone Targets
Solicitation # FA282326Q0062
This solicitation, identified as FA2823-26-Q-0062, is a competitive Request for Quote for Drone Targets under FAR Part 12 as a total small business set-aside, utilizing the Revolutionary FAR Overhaul (RFO) deviations for Parts 12, 19, and 25. The requirement, issued by the Air Force Test Center at Eglin AFB, Florida, seeks 10 drone targets, 2 ground control stations, 2 paired hand controllers, 1 launch interface, and two days of flight training conducted at the contractor’s facility, all aligned with the Technical Requirement Document dated 06 July 2026. The ground control station software must be Mission Planner©, with a formal brand name justification in place. The NAICS code 336411 applies with a size standard of 1,500 employees, and only small business concerns currently registered and designated as such in SAM.gov are eligible to respond; submissions from non-eligible firms will be rejected as non-responsive. All offers must be submitted in U.S. dollars and English, with pricing and warranty terms clearly stated, and delivery timelines specified. FOB Destination shipping is required, with a 45-calendar-day delivery period from award, and all items must be delivered to 15312 Blake Street, Eglin AFB Aux Field 3/Duke Field, FL 32542, or the designated DoDAAC F1TOCY location. Each item must comply with MIL-STD-130 and MIL-STD-129 for Unique Item Identification and packaging, using two-dimensional data matrix symbology and verified as machine-readable with tools compliant with Appendix A of MIL-STD-130. Offers must conform to DFARS 252.211-7003 and DFARS 252.204-7017, addressing item uniqueness and prohibitions on covered telecommunications equipment. Technical acceptability is assessed as a pass/fail criterion based on conformity to the technical document and an active SPRS status—vendors must hold a Blue, Purple, Green, White, Black, or Green (Scorable Data Pending) rating to pass. Evaluation and award is strictly based on the lowest priced technically acceptable offer, following a Lowest Price Technically Acceptable (LPTA) process under FAR 12.203(b). Payment will be processed exclusively via Wide
FA2823 Aftc Pzio

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 336411
New
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3
Department of National Defence

POSTED

3 days ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 484220
New
DIBBS
Transportation and Delivery Logistics (FOB Destination)The contract requires the arrangement and execution of shipment for 29 units to a DLA destination under FOB Destination terms, meaning all transportation risks, costs, and responsibilities fall on the contractor until the goods reach the specified delivery point in Texarkana, Texas, with ZIP code 75507-5000. The contractor is fully accountable for ensuring timely, secure, and compliant delivery, including any potential delays, damage, or loss during transit. This is a subcontract under NAICS code 484220, categorized as a transportation and delivery logistics service, with the Department of Defense through its LAND SUPPLIER OPNS VEHICLE SPT office overseeing the requirement. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all submissions required to meet the terms outlined on the DIBBS platform via the provided link. Performance must align with FOB Destination stipulations, which dictate title and risk transfer only upon physical arrival at the designated location. The contracting entity operates under federal defense logistics protocols, and the contractor must demonstrate full compliance with all federal shipping standards, documentation requirements, and delivery timelines to fulfill contractual obligations successfully.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazardous Communications Standard and DFARS clause 252.223-7001 for the proper labeling, documentation, and management of hazardous materials. All hazardous substances must be accurately labeled in accordance with GHS standards, and complete Safety Data Sheets must be prepared, maintained, and submitted as required. The work involves ensuring that all material handling, storage, and transportation practices meet federal safety and defense acquisition regulations, with a focus on transparency, traceability, and regulatory adherence. Failure to meet these requirements may result in non-compliance penalties or contract termination. Performance is to be carried out at the designated location in Texarkana, Texas, with a response deadline of August 20, 2026. This is a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services. The contracting entity operates under the Department of Defense, specifically the Land Supplier Operations Vehicle Support division, and the work is governed by federal defense supply chain protocols. The contractor must be prepared to demonstrate continuous compliance throughout the contract term and provide all necessary documentation upon request.
Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Inspection ServicesThe contract involves providing quality assurance and inspection services aligned with MIL-STD-1916 or ASQ Z1.4 standards to ensure product conformance, along with the preparation of a Certificate of Quality Compliance to verify that delivered items meet required specifications. Support is also included for origin acceptance activities, ensuring that the source and authenticity of materials or components are validated in accordance with defense procurement protocols. The work is designated as a subcontract under NAICS code 541380 and is associated with the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance required at the designated location in Texarkana, Texas, zip code 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all technical and contractual obligations centered on delivering certified quality documentation and inspection support for military equipment and supply chains.
Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Marking (MIL-STD-129 Compliance)The contract requires full compliance with military packaging, preservation, labeling, and palletization standards, specifically MIL-STD-129, ASTM D3951, and RP001, ensuring all items are prepared for secure storage, transportation, and handling within DoD logistics systems. All work must adhere strictly to these specifications to guarantee uniformity, durability, and traceability of military-supplied materiel. The effort is structured as a subcontract under NAICS code 561910, indicating it relates to support services for transportation and logistics operations, and performance is designated for the location of Texarkana with a zip code of 75507-5000. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support division. While no specific set-aside status or point of contact is provided, the requirement is tied to essential logistics infrastructure supporting military supply chains. Interested parties must ensure their capabilities meet the rigorous standards outlined and deliver end-to-end packaging and marking solutions aligned with federal and military logistics protocols, with no deviations permitted without explicit authorization.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Metal Casting and MachiningThe contract entails the precise manufacturing of an auxiliary power unit housing through advanced metal casting, machining, and finishing processes, all aligned with strict military specifications and technical drawings. The work must meet exacting quality and performance standards required for defense applications, ensuring structural integrity, dimensional accuracy, and durability under demanding operational conditions. The production will be carried out at the designated place of performance in Texarkana, Texas, with the delivered product expected to conform fully to military-grade requirements. This is a subcontract opportunity under the NAICS code 332721 for metal casting, issued by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization. The solicitation was posted on August 9, 2026, with a strict response deadline of August 20, 2026, giving potential bidders a limited window to submit proposals. While no set-aside provisions or specific point of contact are detailed, interested parties must access the official DIBBS portal through the provided link to obtain full solicitation documents and complete the submission process. Any offeror must demonstrate proven capability in high-precision metal fabrication for defense-related components.
Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting Support (Administrative)The contract provides administrative and compliance support for postaward small business program reporting under FAR 52.219-28, focusing on the accurate management and submission of joint venture disclosures for businesses seeking or maintaining WOSB, EDWOSB, SDVOSB, or HUBZone status. This support ensures adherence to federal requirements governing small business subcontracting obligations, including documentation, reporting timelines, and regulatory alignment with SBA guidelines. The effort is critical to maintaining eligibility and compliance for federal contract set-asides designated for small businesses. The solicitation is a total small business set-aside under FAR 19.5, with a NAICS code of 541611, indicating the work involves management consulting services tailored to administrative and compliance functions. It is issued by the Department of Defense under the Land Supplier Operations Vehicle Support office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses are due by August 20, 2026, and the opportunity was posted on August 9, 2026, targeting qualified small business contractors with expertise in federal regulatory reporting and subcontracting oversight.
Administrative Management and General Management Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 518210
New
DIBBS
Barcoding and Shipment Marking ServicesThe contract involves providing barcoding and shipment marking services for Defense Logistics Agency shipments in strict compliance with MIL-STD-129 requirements, utilizing Code 39, Code 128, and PDF417 2D barcodes with the special marking code ZZ. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, ensuring exclusive eligibility for small businesses, and is classified under NAICS code 518210, which pertains to data processing, hosting, and related services. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the solicitation closing date is August 20, 2026, with the opportunity posted on August 9, 2026. The performing organization must be prepared to meet all military standards for labeling, coding, and marking of shipment containers to ensure accurate and efficient logistics tracking throughout the Department of Defense supply chain.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized packaging, preservation, and labeling services for hazardous material shipments, strictly adhering to DFARS 252.223-7001, 29 CFR 1910.1200, and MIL-STD-2073-1E standards to ensure full regulatory compliance and safe handling throughout the transportation lifecycle. All work must be performed in accordance with rigorous defense and occupational safety requirements, with an emphasis on proper containment, hazard communication, durable labeling, and long-term preservation techniques tailored to sensitive military cargo. The scope demands precise execution by qualified vendors capable of meeting the unique demands of Department of Defense logistics while maintaining complete traceability and documentation integrity. This is a small business set-aside subcontract under NAICS code 561990, open exclusively to SBA-certified small businesses with a response deadline of August 20, 2026. Performance is required at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and is managed by the Land Supplier Operations Vehicle Support organization under the Department of Defense. The opportunity is posted on the DIBBS platform with the solicitation number SPE7L326T169U, and interested parties must submit proposals prior to the deadline to be considered for award, with no alternative set-aside options available beyond the total small business restriction.
All Other Support Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Gasket and Preformed Packing SupplyThe contract involves the supply of standardized gaskets and preformed packing sets identified by NSN 5330007865239, with an anticipated quantity of up to 61 units and potential for additional lots based on established procurement history through CAGE-coded vendors. This is a subcontract issued as a Total Small Business Set-Aside under FAR 19.5, exclusively reserved for small businesses, and falls under the NAICS code 332996 for other fabricated metal product manufacturing. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The contracting authority is the Land Supplier Operations Vehicle Support under the Department of Defense, and the opportunity is accessible through the DIBBS platform for qualified small business suppliers to submit proposals.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
Radiator Fan Shroud Supply (NSN 2930016028008)
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF SupportThe contract requires full compliance with electronic invoicing procedures using the Wide Area WorkFlow system to submit invoices and receiving reports, ensuring accurate routing to designated Government DoDAACs for inspection and timely payment processing. All documentation must adhere to DOD standards for electronic submission, and failure to properly route or format submissions may delay payment or result in rejection. The performance location is identified as Williamsburg with ZIP code 23185-5831, indicating where the goods or services are being delivered and inspected. This is a subcontract under NAICS code 541512, classified under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with a response deadline of August 20, 2026, and posted on August 9, 2026. No set-aside designation is specified, and the point of contact details are not provided within the data. Submittals must be made through the designated DIBBS portal, and contractors are expected to maintain strict adherence to WAWF protocols throughout the contract lifecycle without reliance on paper-based or manual alternatives.
Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires strict adherence to OSHA Hazard Communication Standard and DFARS 252.223-7001, mandating proper hazard communication, labeling, and submission of Material Safety Data Sheets for all regulated materials incorporated into components. All suppliers must ensure that chemical hazards are clearly identified and documented in compliance with federal safety regulations, with accurate and timely MSDS documentation provided for any hazardous substances used in manufacturing or assembly processes. Compliance is non-negotiable and applies to every stage of component production and delivery. The contract is issued under NAICS code 541620 by the Department of Defense’s LAND SUPPLIER OPNS VEHICLE SPT office, with performance required at Williamsburg, Virginia, 23185-5831. It is structured as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026. All parties must meet regulatory obligations without exception, and failure to comply with labeling or documentation requirements may constitute a material breach of contract terms. The solicitation can be accessed via the DIBBS portal for full procedural details and submission guidelines.
Environmental Consulting Services

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details