Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GASKET

Active
SPE7L1-26-T-906RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

General Info

Supply one NSN 5330-01-610-9969 gasket, FOB origin, MIL-DTL-117 packaging, no asbestos or mercury unless exempted, deliver by July 31, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

B AVENUE BLDG 105, SOLOMONS, MD, 20688-0054, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-906R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
OSHKOSH AEROTECH, LLC 54077 P/N L100212
SPE7L1-26-T-906R
SECTION B
PR: 7017706951 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017706951 0001 EA 1.000
NSN/MATERIAL:5330016109969
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N68778
FLEET READINESS CENTER ASE
B AVENUE BLDG 105
SOLOMONS MD 20688-0054
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE7L1-26-T-906R
SECTION B
PR: 7017706951 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
N68778
FRC AVIATION SUPPORT EQUIPMENT
B AVE
BLDG 105
SOLOMONS MD 20688
US
M/F: (TCN) N6877862094336
RDD: 223
PROJ: BKO TP 1
SUPP ADD: N68778 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 27 FC: XF
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE7L1-26-T-906R NSN/Part Number: 5330-01-610-9969 Quantity: 1 EA Purchase Request: 7017706951QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L1-26-T-907C
The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9140
The contract pertains to the procurement of 2,907 units of SEAL, PLAIN ENCASED under solicitation SPE7LX-26-U-9140, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 57 days after order, and the item is identified by NSN 5330-01-481-0888. All items must be free of asbestos, and any alternatives must comply with Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List, with revisions governed by the solicitation issue date for simplified acquisitions or amendment date if changed. Covered defense information provisions apply, and government identification must be removed from non-accepted supplies per RQ011. Packaging requirements are dictated by DLA standards, and all deliveries must meet these specifications regardless of shipment type. The point of contact is Theodore Misiolek, reachable via phone and email, with responses due by August 18, 2026, and the solicitation posted on August 3, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-T-145R
The contract is for a Parts Kit, Seal Replacement, identified by NSN 5330-01-698-6493, with a quantity of one unit and a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-145R, issued by the Department of Defense's Land Supplier Operations Vehicle Support agency, with performance required in San Diego, California, 92136-3581. All materials must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract prohibits the use of class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, and chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier as specified by NAVSEA 5100-003D. Asbestos is strictly forbidden in all supplied items, and any alternatives require formal approval under Clause L30 and Provision 4 conditions. Government identification must be removed from non-accepted supplies, and all packaging must meet DLA procurement requirements. The solicitation closes on August 14, 2026, with Susan Diamond as the primary point of contact via email and phone.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL KIT
Solicitation # SPE7L3-26-Q-1248
The contract pertains to the procurement of a SEAL KIT under solicitation number SPE7L3-26-Q-1248, with a required quantity of 124 kits, delivered under a firm fixed price structure and zero variance allowance. Delivery is mandated within 90 days after order award, with inspection and acceptance occurring at the destination point, and FOB terms set at origin. The item is identified by NSN 5330-01-178-6210 and classified as a critical application item, subject to stringent quality and configuration controls referencing the DLA Master List of Technical and Quality Requirements. Packaging and preservation must conform to MIL-STD-2073-1E, Appendix D, for kits, with marking per MIL-STD-129 and palletization in accordance with DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instrumentation, weapon systems, or authorized chemical reagents, with any permitted mercury-containing items requiring shock-proof design and secondary containment. Asbestos is entirely forbidden. Sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per specified criticality. The item does not require Unique Identification per customer request, and all technical and quality specifications referenced are governed by the DLA Master List revision effective as of the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and pricing, terms, and logistics align with DoD unit-of-issue standards and transportation protocols outlined in DLAD procedural notes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9145
This contract specifies the procurement of an O-ring item identified by NSN 5331-01-479-0634 with a total quantity of 141 handling units, subject to a strict delivery timeline of 73 days under FOB origin terms, with no variance allowed in quantity. The item is classified as a critical application component with a non-extendable shelf life of 180 months under Type I (Code Y) requirements and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1 using medium duty, waterproof, greaseproof, opaque bags to protect against UV degradation. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating shelf-life compliance. The item is prohibited from containing asbestos as defined by FED-STD-313 and must not come into direct contact with mercury or mercury-containing compounds except for approved functional uses such as batteries, instruments, or sensors specified by NAVSEA, with portable devices requiring shock-proof construction and a secondary containment barrier. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements. This solicitation is a total small business set-aside under NAICS code 339991, with the award made through DLA Direct, CONUS, and all deliveries must be made to the destination point for inspection and acceptance. The contract applies to direct vendor delivery, foreign military sales, and stock shipments, and the vendor must meet all packaging, labeling, and material restrictions outlined in DLA’s official directives.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-319X
The contract pertains to the supply of 1,180 O-RINGS with NSN 5331-01-026-5117 under solicitation SPE4A5-26-T-319X, with a delivery deadline of 128 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. The item is subject to stringent quality assurance protocols, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Attribute classifications for critical, major, and minor characteristics must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All supplies must adhere to DLA packaging rules, include proper physical marking, and undergo inspection and acceptance at the manufacturer’s facility. Export control restrictions apply as the technical data is governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to controlled data is restricted to contractors possessing valid US/Canada Joint Certification Program certification, completed DLA training, and formal approval. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. The Defense Information handling procedures and Cybersecurity Maturity Model Certification Level 2 requirements are enforced, with CMMC Level 2 certified third-party assessment organizations mandatorily involved. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is issued by the Department of Defense’s ASC Supplier Operations OEM Division, with performance expected at Jacksonville, Florida, and inquiries directed to Katelane Dillard.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L5-26-T-4739
This contract specifies the supply of 10 gaskets identified by NSN 5330-01-328-7643 and part number 1441016-1 from Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4739. The delivery is due within 141 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application and contains no asbestos as defined by FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact unless specifically exempted for functional components like batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Shipping must adhere to DLA distribution instructions, with the final delivery address at the New Cumberland, PA facility, and transportation details governed by DLAD procedural notes C19 and C20.
LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906X
This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7LX-26-U-9154
The contract solicitation SPE7LX-26-U-9154 calls for 112 nonmetallic seals, identified by NSN 5330-01-689-5259, under a total small business set-aside, with a response deadline of August 18, 2026, and delivery required within 97 days of award. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag complying with MIL-DTL-117, Type II, Class C, Style 1, due to the vulnerability of the associated stock numbers to ultraviolet degradation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with corresponding AQLs of 0.1, 1.0, and 4.0. The seal must be marked in accordance with MIL-STD-130N for U.S. military property identification, and any configuration changes require formal engineering change proposals. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access it. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and covered defense information provisions apply. Drawings are available exclusively during open solicitation via the DIBBS portal, and all work must be performed by a certified small business under NAICS code 339991.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-T-145N
The contract pertains to the procurement of 10 units of RETAINER, PACKING with NSN 5330-01-428-4042 under solicitation SPE7L3-26-T-145N, with a delivery deadline of 85 days after award. All items must comply with stringent packaging standards requiring medium duty, waterproof, greaseproof, and opaque bagging in accordance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against UV degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any substitute materials must be approved per Clause L30 and Provision 4 conditions. Ozone-depleting chemicals are strictly prohibited, and mercury or mercury-containing compounds are banned except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. Components must originate from approved sources listed on Qualified Products Lists or Qualified Manufacturers Lists as defined in Procurement Note H02. All packaging must meet oxygen clean standards and proper marking requirements. The contract also mandates adherence to MIL-STD-130N for identification marking and incorporates technical and quality requirements from the DLA Master List, with revisions governed by solicitation issue or amendment dates. Configuration changes require formal engineering change proposals or variance requests, and source approval documentation is mandatory. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, with point of contact Amber Rohly at dla.flbb2prs@dla.mil.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906M
The contract pertains to the procurement of four gaskets, identified by NSN 5330-01-408-9660 and part number PL 8.0SLV-9 REV A-65C, supplied by Buffalo Pumps Inc. of North Tonawanda, NY. The item must comply with stringent material restrictions, including a complete prohibition of asbestos as defined in Fed-Std-313 and the intentional exclusion of mercury or mercury-containing compounds from direct contact with the hardware, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The solicitation number is SPE7L1-26-T-906M, posted on August 3, 2026, with responses due by August 14, 2026, and delivery is required within five days of award. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. The place of performance is listed as FPO, ZIP 09532, and the NAICS code is 339991.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145L
The contract is for the supply of four gaskets identified by NSN 5330-01-115-9727 under solicitation SPE7L3-26-T-145L, with a requirement for delivery within 90 days of award. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified third-party assessment organization, ensuring compliance with stringent federal cybersecurity standards. The contract incorporates technical and quality requirements from the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. All items must adhere to MIL-STD-130N for identification marking and be packaged in a medium-duty, waterproof, greaseproof, opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any substitution requires approval under clause L30 and provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; in such cases, portable devices must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The place of performance is Corpus Christi, Texas, with the Department of Defense’s Land Supplier Operations Vehicle Support as the contracting office, and Amber Rohly identified as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE7L1-26-T-907V
The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXTEN
Solicitation # SPE7L1-26-T-906Y
The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAPPING
Solicitation # SPE7L1-26-T-908A
The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7L1-26-T-907W
The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOUSING, PANEL, VEHIC
Solicitation # SPE7L1-26-T-907J
This contract pertains to the procurement of a housing panel for vehicle applications under solicitation SPE7L1-26-T-907J, with the NSN 2510-01-687-5387 and a single unit of issue (AY). The item must be delivered within 20 days to a military vessel shipment address at FPO AP 96694-7100, with delivery terms as FOB origin and inspection and acceptance occurring at destination. No quantity variance is permitted. All packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with the DLA Master List of Technical and Quality Requirements taking priority over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The contract mandates shipment via the fastest traceable means, explicitly prohibiting parcel post, and directs vendors to use the VSM system for routing. The required delivery date is July 28, 2026, and specific tracking details including transport control number, RDD, project code, and signatory are provided for logistical execution. All specifications are bound to the DLA procurement policies, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
DIBBS
BLOCK, PIVOT
Solicitation # SPE7L1-26-T-906P
This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
COVER, HANDLE, DOOR, V
Solicitation # SPE7L1-26-T-907Y
This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-907X
The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-906Q
The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-907G
The contract pertains to the procurement of 21 threaded standoff spacers with NSN 5340-00-206-7632 under solicitation SPE7L1-26-T-907G, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. The delivery is required within 122 days after order, with responses due by August 14, 2026. Compliance with DLA packaging requirements and technical quality standards identified by R or I numbers is mandatory, governed by the DLA Master List of Technical and Quality Requirements, with the appropriate revision effective based on the solicitation or award date. The item is subject to full and open competition without set-aside restrictions. The product must not contain Class I ozone-depleting chemicals, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for specific permitted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as outlined in NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including those located in the United States. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and written authorization from the DLA. The place of performance is New Cumberland, PA, and inquiries should be directed to Michael Nordahl at the provided DLA email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details