Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GATE, GUIDE

Active
SPE7L3-26-T-147CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three units of a GATE, GUIDE component identified by NSN 1005-01-324-3094 under solicitation SPE7L3-26-T-147C, with a delivery deadline of 318 days from award. The requirement is governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications referenced by R or I numbers, and compliance with tailored higher-level quality standards for both manufacturers and non-manufacturers. Demilitarization protocols for Category I munitions items apply, and cybersecurity requirements mandate CMMC Level 2 self-assessment or certification by an accredited third-party organization. Export control restrictions are in effect due to the presence of technical data subject to ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and official approval. Packaging must adhere to DLA standards, and inspection and acceptance occur at origin. Item Unique Identification is waived per customer request, but physical marking and removal of government identification from non-accepted supplies are required. Configuration changes require formal engineering change proposals or variance requests. The place of performance is New Cumberland, PA, with Katelyn Young of the Department of Defense serving as the primary point of contact.

General Info

Procurement of three GATE, GUIDE units under DLA contract with CMMC Level 2, ITAR/EAR controls, and New Cumberland, PA delivery.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-147C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
KATELYN YOUNG
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GATE,GUIDE
GATE, GUIDE (CASTING).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
SPE7L3-26-T-147C
SECTION B
technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1005-01-324-3094 Quantity: 3 EA Purchase Request: 7017696340QTY: 3 Delivery: 318 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
Gear and Transmission Component SupplyThe contract pertains to the supply of precision-machined components including gears, shafts, bearings, and transmission sub-assemblies specifically designed for use within tractor drive units. These parts are critical to the mechanical functionality and performance of military-grade equipment, requiring high standards of engineering precision and material durability. The solicitation is issued as a subcontract under NAICS code 332994, indicating the focus is on other fabricated metal product manufacturing, with performance expected to occur in New Cumberland, Pennsylvania, at the designated zip code 17070-5002. The opportunity was posted on August 4, 2026, with a firm response deadline of August 7, 2026, leaving a narrow three-day window for potential suppliers to submit proposals. While no set-aside classification or agency-specific procurement restrictions are specified, the contract is managed by the Department of Defense through its Construction & Equipment Manufacture and Construction division. All submissions must be made through the DIBBS platform, with the official solicitation accessible via the provided UI link. Suppliers are expected to meet stringent quality and delivery criteria consistent with defense production requirements.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
Hose Assembly Supply and DeliveryThe contract entails the supply and delivery of four nonmetallic hose assemblies, identified by NSN 4720011546337, each equipped with permanent fittings that meet specified military and Defense Logistics Agency standards. These assemblies are intended for use within defense systems and must adhere to strict quality and performance criteria established by the Department of Defense. The contract is classified as a subcontract under NAICS code 332994, indicating specialized manufacturing activities not elsewhere classified, and was posted on August 4, 2026, with no set-aside provisions for small or disadvantaged businesses. Performance is expected to be carried out under the purview of the Defense Logistics Agency, though specific delivery locations and points of contact are not detailed. The award reference number SPE7M326V3919 is linked to the official DIBBS portal for tracking and administrative purposes.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332994
New
DIBBS
DOOR, ACCESS, WEAPON
Solicitation # SPE4A6-26-U-3305
This contract pertains to the procurement of a Door, Access, Weapon System identified by NSN 5342-01-106-6632, with a quantity of 64 units, under solicitation SPE4A6-26-U-3305. The requirement is set aside exclusively for small businesses, as defined under FAR 19.5, and falls under NAICS code 332994. Delivery is mandated within 116 days after order placement. Compliance with stringent technical and quality standards is required, incorporating specifications from the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item is subject to rigorous inspection and acceptance protocols at origin, governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes must be classified with specific verification levels or AQLs. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons or entities without prior authorization, and access is limited to contractors holding approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaires. Physical identification and marking of items must meet explicit CMMC Level 2 and RQ017 requirements, and all government identification must be removed from non-accepted supplies. Packaging must adhere to DLA procurement standards, and point of contact for inquiries is Heather Spadaro of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HANDLE, PUMP
Solicitation # SPE4A7-26-T-609P
The contract pertains to the procurement of 50 pump handles identified by NSN 5342008679546 under solicitation SPE4A7-26-T-609P, with delivery required within 33 days of shipment. The order is split into three line items totaling 50 units—7 units for delivery to Tinker AFB, Oklahoma; 10 units to Hill AFB, Utah; and 33 units to Robins AFB, Georgia—each with a unit price of $1.00, resulting in a total contract value of $50.00. All items must be packaged in accordance with ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with DLA Packaging Requirements RP001, with the Unit of Issue as EA and Quantity per Unit Pack as 1. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date for all items is October 5, 2026, though each line item has a separate need ship date between May and December 2026. Packaging and shipping instructions, including freight and parcel post addresses, are specified for each location, and all requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM standards where applicable. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
CHARGING LEVER
Solicitation # SPE7LX-26-U-9282
The charging lever, identified by NSN 1005-01-657-2843, is a defense-related item subject to strict export controls under either ITAR or EAR, meaning any transfer of technical data associated with it—whether physical, electronic, or verbal to foreign persons regardless of location—requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. Only two units are being procured under Purchase Request 1000239117 with delivery due 139 days after order. The solicitation, numbered SPE7LX-26-U-9282, was posted on August 4, 2026, with responses due by August 19, 2026, and is set aside exclusively for small businesses under NAICS code 332994. The procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A6-26-T-11SY
The contract is for the procurement of seven grooved couplings and clamps, identified by NSN 5342010178437, with a unit price of $7.00 per item, resulting in a total contract value of $49.00. Delivery is required within 171 days from the contract date, with shipment terms FOB origin and no variance allowed in quantity; the full order of seven units must be delivered without deviation. Inspection and acceptance both occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA’s RP001 packaging guidelines. Mercury and mercury compounds are explicitly prohibited in all preservation, packaging, and marking processes. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery deadline of July 5, 2027. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the solicitation was issued under contract number SPE4A6-26-T-11SY with a response deadline of August 12, 2026. The procurement falls under NAICS code 332994 and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
FAIRLEAD, TUBULAR
Solicitation # SPE4A7-26-T-610P
The contract pertains to the procurement of two tubular fairleads, identified by NSN 5342-01-220-7044, under solicitation number SPE4A7-26-T-610P, with a delivery requirement of 171 days after order. All supplies must comply with the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered standards referenced in the official DLA repository. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Commercial off-the-shelf items are accepted provided the agency has adequate commercial catalog data. The item is to be delivered to New Cumberland, Pennsylvania, with the Department of Defense as the procuring agency under NAICS code 332994. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and all applicable revisions to technical and quality standards are controlled by the solicitation issue date unless amended. Primary point of contact is Jamiah Sutton at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
HOUSING, FEEDER-DELI
Solicitation # SPE7LX-26-U-8874
This contract under solicitation SPE7LX-26-U-8874 is an indefinite-delivery contract issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate for the procurement of Housing, Feeder-Deli items identified by NSN 1005-01-477-6396. The estimated quantity is 13 units, though this is non-binding and subject to actual delivery order placement within a contract ceiling of $350,000. Delivery is required within 94 days of award, with FOB Origin terms applying, and acceptance occurs at the destination. Packaging and marking must strictly adhere to MIL-STD-129 and DLA’s RP001 packaging requirements, with palletization following DLA standards; while ASTM D3951 is referenced, it is subordinate to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware except for specific functional exemptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates a comprehensive set of federal and defense acquisition regulations, including mandatory cybersecurity requirements under CMMC Level 2 self-assessment and the NIST SP 800-171 DOD Assessment Requirements, with stringent safeguarding of covered defense information as defined in FAR 52.227-1 and DFARS 252.204-7012. Contractors must comply with trafficking in persons, employment eligibility verification, sustainable product, and equal opportunity clauses, with deviations noted for several clauses. All offerors must provide a UEI and CAGE code and represent their small business status, including socioeconomic categories such as WOSB, EDWOSB, SDVOSB, or HUBZone, and disclose any involvement with covered defense telecommunications equipment or services. Invoicing must be conducted electronically through WAWF using permitted document types, and the contract prohibits surplus supplies. The award will be made under simplified acquisition procedures using Standard Form 18 submitted via the DIBBS portal by the August 4, 2026 deadline, with no paper submissions accepted.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L7-26-Q-2111
The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
STOP, DRAWER
Solicitation # SPE4A7-26-T-610W
This contract is a total small business set-aside under solicitation SPE4A7-26-T-610W for the procurement of 30 units of part number 575089 identified by NSN 5342012342741, designated as a critical application item and supplied by R F PRODUCTS, INC. (CAGE 58022). The delivery is required within 171 days of award with FOB origin terms, inspection and acceptance occurring at destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, preservation method 10, and unit container D3, with all marking adhering to MIL-STD-129 and no special markings required. Palletization must also follow DLA standards, and the parcel post and freight shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware, supply, or packaging materials, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents under NAVSEA 5100-003D, which must include secondary containment and be shockproof. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The required delivery date is August 7, 2027, with a need ship date of January 31, 2027, and the solicitation closed on August 12, 2026, with Michael Johnson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALL
Solicitation # SPE7L3-26-T-146L
The contract is for the procurement of four units of a small storage rack identified by NSN 1095-01-710-8626 and part number UWRM7U, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and container codes. Marking must adhere to MIL-STD-129 with no special markings, and palletization must follow DLA packaging requirements. The goods are to be shipped via traceable means—parcel post is prohibited—to the designated government facility at Fort Carson, Colorado. The contractor is required to retain complete supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L3-26-T-146L, issued on August 4, 2026, with a response deadline of August 17, 2026. The primary point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-Q-0970
The contract is for a Parts Kit, Receptacle, with a quantity of eight units, under purchase request 7017408641, and has a delivery requirement of 450 days after award. The item is identified by NSN/Part Number 0001S00000052 and is procured under solicitation SPE4A7-26-Q-0970, which is a Total Small Business Set-Aside. Technical and quality requirements are referenced through R and I numbers from the DLA Master List, with specific revisions controlling based on acquisition type and amendment dates. Packaging must comply with DLA requirements, and the item is subject to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessor. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and configuration changes require formal Engineering Change Proposal requests. Inspection and acceptance occur at the origin, and non-accepted supplies must have government identification removed. The item requires physical marking but does not need Item Unique Identification as specified by the service customer. Technical data associated with the item is export-controlled under ITAR or EAR, restricting disclosure to foreign persons anywhere, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract is managed by the Department of Defense’s ASC Supplier Oper AE and AF Div, with primary point of contact TSAONE TLALE, and responses are due by August 14, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332321
New
DIBBS
PRODUCTION CONTROL TES
Solicitation # SPE7L3-26-Q-1164
The contract involves the procurement of five units of automotive transparent armor window with NSN 0001S00000114 under solicitation SPE7L3-26-Q-1164, with a delivery requirement within 147 days after order. The contract mandates compliance with DLA’s technical and quality requirements as listed in the Master List, and packaging must adhere to DLA specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances must be submitted for approval unless explicitly authorized by the technical specs. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any disclosure to foreign persons, including those on U.S. soil, and restricts access to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contractor must be a CMMC Level 2 certified third-party assessment organization, ensuring cybersecurity practices meet federal standards. All activities are governed under the Department of Defense, with performance directed to New Cumberland, PA, and primary point of contact Eric Deck at DLA.
Metal Window and Door Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-147W
The contract pertains to the procurement of five units of a housing, mechanical drive component with NSN/Part Number 0001S00000052 under solicitation SPE7L3-26-T-147W, issued by the Department of Defense through the Defense LogisticsAgency. Delivery is required within 359 days after award, with inspection and acceptance taking place at the supplier’s origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract includes stringent export control provisions under ITAR or EAR, restricting all handling, disclosure, and transfer of technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and authorized access may handle the controlled data. Cybersecurity requirements include CMMC Level 2 certification by a third-party assessment organization, and the solicitation is open to full and open competition. The designated place of performance is in Tracy, California, 95304-5000, with Karen McCarley as the primary point of contact.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-147M
The contract pertains to the procurement of 220 gaskets identified by NSN 5330-21-912-1607 under solicitation SPE7L3-26-T-147M, with a response deadline of August 17, 2026, and a required delivery within 21 days of award. All items must be packaged and sealed in a medium duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment changes the controlling revision. The contract is issued by the Department of Defense under the Land Supplier Operations Vehicle Support office, with performance required at New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Amber Rohly, reachable via email and phone provided, and the NAICS code 339991 indicates the industry classification for other manufacturing.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
DECAL CUT SHEET, AIR
Solicitation # SPE7L3-26-T-147F
The contract pertains to the procurement of two DECAL CUT SHEET, AIR items under solicitation SPE7L3-26-T-147F, with a delivery requirement of five days after award. The item is designated as a commercial item and is identified by the national stock number 5330-01-584-2931. All technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards requiring medium-duty, waterproof, greaseproof, and opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The use of asbestos, as defined in FED-STD-313, is strictly prohibited. Proprietary or insufficient data precludes competitive bidding, and the item is not subject to set-aside classifications. The contracting office is under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with the point of contact being Lee Miller at the provided email and phone number. Performance is directed to FPO with ZIP 96306-0001, and the solicitation closes on August 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTA
Solicitation # SPE7L3-26-T-147J
This contract is for the procurement of a filter element for an intake air cleaner under solicitation SPE7L3-26-T-147J, issued by the Department of Defense through the Defense Logistics Agency. The item is source-controlled with specific drawing and technical revisions referenced, and only approved sources listed on the drawing are recognized at this time, though additional qualified suppliers may exist without being reflected on the document. The item must comply with stringent technical and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special requirements labeled ZZ indicating directional markings and handling instructions. The contract prohibits the use of Class I ozone-depleting chemicals and requires any substitute materials to be pre-approved, overriding any conflicting specification provisions. The contract calls for 97 units to be delivered FOB origin within 84 days, with strict zero variance tolerance and inspection and acceptance occurring at the destination. Each unit must be individually packaged with die-cut or pre-formed cushioning to ensure even weight distribution, impact protection, and prevention of container puncture, in accordance with ASTM D4169 Distribution Cycle 18, Assurance Level II. Packaging validation documentation as specified in MIL-STD-2073-1D, Paragraph 5.6 and 5.2.3 must be provided. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 333618, with responses due by August 17, 2026 and an original required delivery date of September 21, 2026. Primary point of contact is Karen McCarley at DLA.
Other Engine Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-125V
The contract solicitation SPE7L3-26-T-125V seeks 82 units of packing, preformed with NSN 5330-00-057-0674 for delivery to New Cumberland, PA, with a 168-day delivery window beginning from the order date. All packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including the use of medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, and compliance with DLA Packaging Requirements RP001 for palletization. Prohibited materials include asbestos as defined by FED-STD-313 and any intentional addition of mercury or mercury-containing compounds except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must include a second containment boundary and be shockproof per NAVSEA 5100-003D. Radioactive materials exceeding specified activity levels must be packaged and labeled according to MIL-STD-129. Marking requirements include government consignee addresses, 2D and linear barcodes, and removal of government identification from non-accepted supplies. Preservation method PRES MTHD:33 (clng/dry: 1) is mandatory, with no preservation material specified. The contract mandates electronic invoicing via WAWF and compliance with hazardous material labeling under 29 CFR 1910.1200. All subcontractors must flow down safety, packaging, and transportation requirements. The solicitation requires submission via DIBBS by August 7, 2026, and includes clauses on small business representation, equal opportunity, combating trafficking, employment eligibility verification, cybersecurity for controlled unclassified information, and unenforceability of unauthorized obligations. While the contract does not specify pricing, contract type, or evaluation factors, it requires offerors to provide their UEI and CAGE codes and confirm size status and socioeconomic certifications. Performance is FOB origin, with government inspection and acceptance occurring at the destination.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-147L
The contract pertains to the procurement of 54 gaskets with NSN 5330-01-302-9947 and part number 12358949, sourced exclusively from approved suppliers, currently limited to Donaldson Company Inc. All suppliers must comply with the latest revision of the original equipment manufacturer’s drawing and meet MIL-STD-130N identification marking standards for U.S. military property. The item must be free of asbestos as defined by FED-STD-313. Unapproved suppliers are required to secure formal source approval from the OEM and submit supporting documentation including a source approval request, technical data package, or proof of prior approval alongside their offer. The solicitation, identified as SPE7L3-26-T-147L, was posted on August 4, 2026, with responses due by August 17, 2026, and requires delivery within 21 days of award to Texarkana, Texas, 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling for this simplified acquisition. The contracting activity falls under the Department of Defense, Land Supplier Operations Vehicle Support, with primary point of contact Amber Rohly reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7L3-26-T-125H
The contract solicitation SPE7L3-26-T-125H seeks five electrical solenoids identified by NSN 5945-01-527-2487 for delivery to the DLA Land and Maritime facility in Tracy, California, with a required delivery timeline of 12 days ADO. The procurement is governed by a suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing cybersecurity, hazardous material handling, labor compliance, subcontractor management, and payment processes. Key requirements include strict prohibition against intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with exceptions narrowly defined for functional applications such as batteries, sensors, and weapon systems under NAVSEA specifications, requiring shockproof containment and a secondary boundary for portable mercury-bearing devices. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging codes, and labeling per IPC/JEDEC J-STD-609 for lead finish identification. Transportation is FOB destination, with government inspection and acceptance occurring at the delivery site. The contractor must comply with all DLA technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and all hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001. Offerors must certify their small business status, provide UEI and CAGE codes if supplying covered defense telecommunications equipment, and fully disclose joint venture participants if claiming socioeconomic set-aside status. All proposals must be submitted electronically through the DIBBS portal by the deadline of August 3, 2026, and upon award, payment will be processed exclusively via WAWF using the DoDAAC specified in the resulting contract. Pricing data is not provided, and no evaluation factors, weights, or basis of award are specified in the solicitation.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
SPACER, PLATE
Solicitation # SPE7L3-26-T-146V
The contract requires the delivery of two spacer plates, identified by NSN 2590-01-659-7891, under solicitation SPE7L3-26-T-146V, with a total quantity of two units priced at $2.00 per unit, totaling $4.00. Delivery must be completed within 20 days from the date of award, with FOB destination terms applying, and no variance is permitted in quantity. Inspection and acceptance both occur at the origin point, and packaging must conform to MIL-STD-2073-1E with specific preservation methods including dry preservation, no protective coating or cushioning materials, and unit packaging in accordance with OPI O and intermediate container E5. Marking must comply with MIL-STD-129 without any special markings, and palletization must follow DLA’s RP001 packaging requirements. The shipment is directed to FPO AP 96660, addressed to USS ASHLAND LSD 48, and parcel post is explicitly prohibited—shipment must be sent by the fastest traceable means. The required delivery date is December 18, 2025, and the contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with Lee Miller as the point of contact. The NAICS code is 333310, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
PANEL, HOUSING, SECTI
Solicitation # SPE7L3-26-T-147D
The contract pertains to a PANEL, HOUSING, SECTI with NSN 2590-01-687-7510, requiring one unit for delivery within 20 days of award under Purchase Request 7017730998. The solicitation number is SPE7L3-26-T-147D, posted on August 4, 2026, with a response deadline of August 17, 2026. The item falls under NAICS code 333310 and is managed by the Department of Defense through the Land Supplier Ops Vehicle Support agency, with performance occurring at Fort Stewart, Georgia. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to strict export controls under ITAR or EAR, prohibiting any disclosure to foreign persons, whether inside or outside the U.S., without prior authorization from the Department of State or Commerce. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. These requirements are enforced under DFARS 252.225-7048. The point of contact for inquiries is Lee Miller, reachable via email and phone provided in the contract details.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Solicitation # SPE7L3-26-T-146R
The contract pertains to the procurement of 36 units of a SEAL ASSEMBLY, identified by NSN 5330-01-170-8632, under solicitation SPE7L3-26-T-146R, with a response deadline of August 17, 2026, and a scheduled delivery 323 days after award. The item must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment supersedes it. The acquisition falls under NAICS code 339991 and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance occurring in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email and phone provided, and all submissions must be made through the DIBBS platform.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-147Q
The contract is for the procurement of four rigid connecting links, identified by NSN 3040-01-249-1517, with a unit price of $4.00 per unit and a total contract value of $16.00, delivered FOB origin within 462 days. All items must comply with stringent DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are held to the strictest verification levels. The product must not contain any Class I ozone-depleting chemicals, and any substitutions must be approved in advance. Components must originate from qualified manufacturers or products listed on approved QPLs or QMLs, and configuration changes require formal engineering change proposals. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and the item is classified as a critical application. The manufacturer is also required to conduct a first article test, represented by a separate line item with no unit price listed, signaling that no separate charge is expected unless otherwise stated. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with compliance to the latest revisions of all applicable standards. Delivery is directed to DLA Distribution Anniston, Alabama, with no variance permitted in quantity, and inspection and acceptance occur at the point of origin.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details