Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GAUZE, ABSORBENT, IOD

Active
SPE2DS-26-T-279JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Absorbent gauze impregnated with iodine, measuring 0.25 inches by 5 yards in rolled form, is specified for use in oral and nasal surgeries and as a drainage wick in the treatment of boils, abscesses, and fistulas. The product must be sterile and packaged in units of 12 each, with a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between manufacturing and delivery to the government. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container to prevent damage and shipped in appropriate exterior containers suitable for safe transport by common carriers at the lowest cost to the delivery point. The product must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and information on this standard is available through DLA Troop Support. The item is subject to technical and quality requirements listed in the DLA Master List, and packaging must adhere to DLA requirements as detailed in Section B of contract SPE2DS-26-T-279J. Government identification must be removed from non-accepted supplies. The item is identified by NSN 6510-01-003-7697, with a single unit to be delivered within five days of award, under a solicitation issued by the Department of Defense’s Medical Supply Chain Medical Surgical Fiscal Service, with performance directed to Suffolk, Virginia.

General Info

Sterile iodine-impregnated gauze roll, 12 units per pack, 36-month shelf life, delivered to Suffolk, Virginia, per DLA specs.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-279J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Seth Tootell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAUZE,ABSORBENT,IOD
GAUZE, ABSORBENT, IODOFORM IMPREGNATED
.
GAUZE IODOFORM IMPREGNATED .25" X 5 YD; ROLLED FORM; FOR USE IN ORAL AND
NASAL SURGERY AND AS A DRAINAGE WICK IN THE TREATMENT OF BOILS, ABCESSES
AND FISTULAS; STERILE
.
UNIT OF ISSUE PACKAGE(PG) OF 12 EACH
.
SHALL HAVE A SHELF LIFE OF 36 MONTHS.
NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE2DS-26-T-279J
SECTION B
.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-003-7697 Quantity: 1 PG Purchase Request: 7017638293QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSEThe contract specifies the procurement of Prodigy Autocode Blood Glucose Test Strips, designed for use with all Prodigy pocket meters and featuring no-coding technology that eliminates manual calibration. Utilizing oxidase technology instead of GDH-PQQ, the strips offer safer and more accurate glucose measurements with automatic capillary action drawing the blood sample into the strip. These strips are approved for alternate site testing and are packaged in boxes of 50, with the unit of issue designated as BX. The product must comply with stringent medical packaging and labeling standards, including adherence to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Kings Bay, Georgia. The strips must have a non-extendable shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-278Q, with a response deadline of August 3, 2026, and a required delivery within 20 days after award. The NSN is 6550-01-680-9339, and bidders must provide the source and part number being supplied. The acquisition falls under NAICS code 339113 for medical device manufacturing and is managed by the Department of Defense, with technical and quality requirements incorporated from the DLA Master List. Covered defense information may apply, and all packaging must meet DLA requirements, including the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,This contract specifies the procurement of sterile adhesive skin closure strips measuring 3 inches by 1/4 inch, supplied in quantities of 200 units per package, with four boxes per package, totaling 3 packages. Each unit must be sealed in a commercial-grade container that ensures protection from damage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. The product must have a minimum shelf life of 24 months from the manufacturer’s date, with no more than three months elapsed between manufacturing and government delivery. Labeling requirements mandate clear markings for the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is designated as a Type I (Code M) shelf-life item under RS016, and its shelf life is non-extendable. All packaging, labeling, and marking must adhere to DLA’s packaging and medical marking standards, including the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-278D, with a response deadline of August 3, 2026, and a delivery requirement within 20 days of award. Bidders must identify the source and part number being offered, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The item is classified under NSN 6510-01-365-2077 and NAICS code 339113, and the procurement falls under federal acquisition protocols. The point of contact for inquiries is Anh Lam of the Department of Defense, Medical Supply Chain, and all documentation must reflect the most current standards specified by DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of 4 units of surgical adhesive skin closure strips, each unit consisting of 300 sterile strips measuring 0.50 inches by 4 inches, with porous backing options including polypropylene film or nonwoven nylon fabric, packaged in fifty envelopes per box. The product must have a minimum shelf life of 36 months, and no more than five months may have passed from the manufacturer’s production date to the delivery date to the government. The item is identified by NSN 6510-00-054-7254 and is subject to technical and quality requirements referenced in the DLA Master List, as well as DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-278Z, was posted on July 28, 2026, with a response deadline of August 3, 2026, and requires delivery within 48 days of award to the performance location in APO 96260-5479. The contracting agency is the Department of Defense’s Medical Supply Chain, with Tiffany Parker listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATORThe contract pertains to the procurement of a 1-liter test lung device specifically designed for use with IMPACT and ZOLL ventilator series 731 and 754M models, serving as a calibration tool within the broader ventilator calibration kit identified by NSN 6515-01-606-1476. The item is sold individually with a unit of issue of each and must comply with DLA packaging requirements for procurement. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, are fully incorporated and binding. Bidders are required to clearly state the source and part number being supplied and must adhere to the regulation mandating removal of government identification from non-accepted supplies. The product is listed under NSN 6515-01-608-7696 with a single unit requested under purchase request 7017631835 and must be delivered within 20 days of award. The solicitation number is SPE2DS-26-T-278E, issued on July 28, 2026, with responses due by August 3, 2026, under NAICS code 339113 for medical equipment manufacturing. The awarding agency is the Department of Defense, through the Medical Supply Chain MD Surg FSF, with delivery performance required at Travis Air Force Base, CA 94535-1825. Primary point of contact for inquiries is Aidan Martz, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST KIT, FECAL RAPIDThe test kit is a rapid fecal diagnostic tool designed for the qualitative detection of Entamoeba histolytica pathogens in human stool specimens, specifically for patients exhibiting symptoms of diarrhea or dysentery. It utilizes a membrane enzyme immunoassay in a single-use cassette format to identify the organism’s adherin, delivering results within 30 minutes without the need for specialized instrumentation. The kit has an analytical sensitivity of 0.2 ng/mL and is intended for use in clinical settings requiring swift diagnosis. Each package contains 25 tests and must be stored under refrigeration between 2 to 8 degrees Celsius; freezing is prohibited. The product has a non-extendable shelf life of 12 months from manufacture, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with Medical Marking Standard No. 1. Packaging must meet commercial standards ensuring protection from damage and safe transport via common carrier, with exterior containers suitable for shipping and export if required. The item is governed by DLA technical and quality requirements, packaging standards, and defense information protocols. The NSN is 6550-01-671-9115, with a purchase request quantity of one package, slated for delivery within 20 days to Fort Bliss, Texas, under solicitation SPE2DS-26-T-278B, issued by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUNDThe contract specifies the procurement of 50 kit units of a sealing compound compliant with SAE AMS 3281E Revision E, dated December 2010, classified as Type 1, Class B-1/2, with a specific gravity range of 1.20 to 1.35 and a gray color configuration requiring a separate catalyst. The product is designated for intermittent use up to 360°F and is intended for integral fuel tanks and fuel cell cavities. It is subject to a qualified products list requirement, mandating that the manufacturer be QPL-approved at the time of contract award. The item has a shelf life of nine months, extendable under RS001 requirements for TYPE 2 (CODE 3) items, and is marked with a special labeling code 33 indicating shelf life conditions. All packaging, marking, and shipping must adhere to MIL-STD-129R, including the inclusion of lot or batch numbers, and packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging standards. The compound is classified as a hazardous material, requiring submission of Safety Data Sheets and HCS-compliant labels per OSHA’s 29 C.F.R. 1910.1200, with supplier employees obligated to undergo training on these requirements. Delivery is due within five days, FOB destination, with no quantity variance allowed, and must be shipped to JBER, AK, following all hazardous materials transportation protocols outlined in DLA procedural notes. The NSN is 8030-01-479-6036, and the solicitation number is SPE8ES-26-T-2453, with a response deadline of August 3, 2026, and an original required delivery date of July 29, 2026.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SLEEVE, WRAP-AROUND,The sleeve is a wrap-around pneumatic compression device featuring three internal bladders designed to deliver circumferential, sequential, and gradient compression to promote deep vein clearance while preventing distal blood trapping. It is anatomically contoured with an adjustable closure system to ensure a customized fit for each patient and is intended for single-use only, arriving in a non-sterile, disposable state. The sleeve is thigh-length and sold in pairs, with five pairs per package. This item carries a fixed shelf life of 60 months under the DLA’s RS023 requirement and cannot be extended. It is subject to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced in the contract. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being offered. The NSN is 6515-01-565-1340, with a solicitation number of SPE2DS-26-T-276Q, issued on July 28, 2026, and responses are due by August 3, 2026. The purchase request is 7017631796 for a single package, with delivery required within 20 days after order. Performance is specified at Fort Bliss, Texas, and the contracting authority is the Department of Defense under the Medical Supply Chain MD Surg FSF, with Marcos Aliaga listed as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract calls for the procurement of 20 disposal containers specifically designed for the safe handling and disposal of hypodermic needles and syringes. Each container must measure between 6 to 7 inches in length and 1 to 2 inches in diameter, feature a securable cap, and include a lift-off cover to ensure safe containment and prevent accidental exposure. The product is identified by NSN 6530-01-645-6923 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The contract also notes that Covered Defense Information may apply, requiring compliance with relevant data protection protocols. Delivery is required within 20 days of award, with performance location specified as Fort Bliss, Texas, 79918-2527. The solicitation, identified as SPE2DH-26-T-5564, was posted on July 28, 2026, with responses due by August 4, 2026. It falls under NAICS code 339113 for medical and surgical instrument manufacturing and is a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH. Tina Vu is the primary point of contact, reachable via email and phone, with additional details available through the DIBBS portal. No set-aside classification is indicated, and the procurement is open to all qualified vendors meeting the specified technical, quality, and logistical requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICALThe contract specifies the procurement of sterile surgical sponges measuring 4 inches by 4 inches, packaged with two sponges per sealed envelope and twenty-five envelopes per box, totaling twelve hundred units per package. The product must maintain a shelf life of sixty months, with no more than nine months elapsed between the manufacturer’s date and the delivery date to the government. All labeling must comply with the latest revision of Medical Marking Standard No. 1, including clear identification of the manufacturer date, expiration or retest date, contract number, and lot number, and must replace all references to MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement document, ensuring each unit is sealed in a protective container and the entire shipment is packed in external containers suitable for safe transport by common carriers at the lowest possible rate to the delivery point at Travis AFB, California. The item is identified by NSN 6510-00-721-9808 and falls under NAICS code 339113, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Bidders must provide the source and part number being supplied, and all materials are subject to the Defense Information potentially applicable under RD003. The solicitation, issued under contract number SPE2DS-26-T-278G, has a response deadline of August 3, 2026, and requires delivery within twenty days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPECTACLES, INDUSTRIALThis contract is for the procurement of industrial safety spectacles under the NSN 4240-01-729-1700, with a quantity of 50 units, issued by the Defense Logistics Agency under solicitation SPE8E6-26-T-3894. The specification requires strict adherence to DLA packaging standards as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking instructions and palletization per DLA packaging requirements. The unit of issue is each, with a unit price of $50.00 and a total contract value of $2,500. Delivery is FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. The supplier must comply with all technical and quality requirements referenced through R or I numbers from the DLA Master List, and the contract incorporates provisions for covered defense information under RD003. The item is to be delivered to Fort Carson, Colorado, with the delivery and marking instructions identical for shipping and marking purposes. The contract mandates that no government identification be removed from non-accepted supplies and follows the DLA Procurement and Packaging Requirements. The buyer is identified as the 4th Combat Support Battalion, Company A Distribution, under the W81XF9 Military Installation. The required delivery date is July 30, 2026, and the solicitation closed on August 10, 2026. The contract includes specific logistics guidance referenced in DLAD Procurement Notes C19 and C20 for transportation and freight, and the primary point of contact is John Lieb of the DLA, reachable via provided phone and email. The contract code, supplier identifier, and all logistical data, including the unit of issue translation, are tied directly to official DLA systems, and any revisions to referenced standards must align with the solicitation or award date as defined for simplified or large acquisitions.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
BULB, OTOSCOPEThe contract is for the procurement of 15 otoscope bulbs under NSN 6515-01-647-7534, sourced from Welch Allyn, Inc. with part number 06500-U, requiring delivery within 20 days to Fort Bragg, North Carolina, under FOB destination terms. The item is classified as a FDA-regulated Class I medical device, requiring compliance with registration, listing, labeling, and GMP standards even if a 510(k) is not mandatory. Packaging must adhere to commercial standards specified in the procurement document, with each unit sealed in a protected container and shipped in suitable exterior containers ensuring safe, cost-effective delivery. All marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The items must be shipped via traceable freight methods, excluding parcel post, and palletization must comply with DLA packaging requirements. The contract reference number is SPE2DS-26-T-278L, with a response deadline of August 3, 2026, and the required delivery date is July 29, 2026. The purchasing unit price is $15.00 per unit, totaling $225, with no variance allowed in quantity. The contracting official must submit a referral in EBS to confirm regulatory compliance, including manufacturer and bidder details. The supply chain and delivery logistics are managed under Defense Logistics Agency protocols with specific identification codes for tracking and accountability.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTUREThe contract specifies the procurement of acupuncture needles measuring 0.30 mm in diameter by 50 mm in length, with a unit of issue of a package containing 100 needles. Each package must be labeled with the NSN 6515-01-674-2741, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract number alongside the lot number. All containers must be marked with the lot control number and manufacture date prefixed by “MFD”. The supplier must clearly identify the company and part number being provided, including approved identifiers such as LHASA OMS, INC. P/N SJ.30X50 and OWENS & MINOR DISTRIBUTION INC P/N 6244RM128488. The product is regulated by the FDA, requiring referral through EBS for confirmation by the product specialist prior to award, with full bidder and manufacturer details provided. All packaging must comply with commercial standards, be sealed to protect contents from damage, and be shipped in suitable exterior containers for safe transit at the lowest carrier rate. Labeling and marking must follow Medical Marking Standard No. 1, surpassing references to MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The delivery is FOB destination, with a strict 20-day delivery timeline and a required delivery date of July 29, 2026. No quantity variance is permitted. The items must be palletized per RP001, shipped via traceable means excluding parcel post, and delivered to the specified military facility at Fort Bragg, North Carolina. The contract is issued under solicitation SPE2DS-26-T-277G, with total quantity of 4 packages and a unit price of $4.00 per package.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
REFILL MODULES, PROCThe contract specifies the procurement of twenty-eight refill modules for the Brosewell Hinkle Pediatric Resuscitation System, designed for use with the seven-color packs or color-code cart. These modules support critical pediatric emergency procedures including intraosseous access, oxygen delivery, intubation, and IV delivery, and are explicitly latex-free to ensure safety and compliance with medical standards. Each complete unit must be packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers suitable for safe transport by common carriers at the lowest possible cost to the specified delivery point at Fort Bliss, ZIP 79918-2527. All items must conform to Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and labeling must follow this standard strictly. The unit of issue is each, with one unit being procured under NSN 6515-01-513-9488 and purchase request 7017631807. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling compliance. The solicitation, issued under SPE2DS-26-T-277L, has a response deadline of August 3, 2026, and requires delivery within 20 days after award. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with primary point of contact Brooke Webb.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
BRACE, WRIST AND FOREARThe contract pertains to the procurement of two wrist and forearm braces with NSN 6515-01-699-6578, supplied by NORTH COAST MEDICAL, INC. under part number NC91263, for delivery within 84 days to a designated military medical facility in APO AE 09227-0000. Each unit must be individually sealed in a commercial-grade container that protects against damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible rate. All packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions must follow RP001 and other referenced DLA guidelines. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, listing, labeling, and GMP standards, though a 510(k) may or may not be required. The contract specifies zero variance in quantity, with inspection and acceptance occurring at destination, and mandates adherence to DLA packaging and marking protocols including palletization standards. Delivery is FOB destination, and transportation must conform to DLAD procedural notes C19 and C20. The solicitation is issued under SPE2DS-26-T-279E with a response deadline of August 3, 2026, and the item is procured under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICALThe contract specifies the procurement of a surgical connector made of corrosion-resistant metal, designed as a Diamond O2 Quick Connector with a DISS male fitting and integrated check valve, intended for use in oxygen tube fittings. Each unit is to be supplied as a complete, individually sealed container that protects against damage or breakage, with all units packed in appropriate commercial shipping containers to ensure safe delivery via common carrier at the lowest rate to the specified delivery point in APO, ZIP 09094-3219. All packaging and marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly identify the source and part number being offered. The item is identified by NSN 6515-01-457-0271, with a quantity of 10 units required and a delivery deadline of 20 days after award. The solicitation falls under the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers, and packaging requirements governed by DLA standards. The acquisition is subject to Defense Information potentially covered under RD003, and government identification must be removed from non-accepted supplies per RP001 and RQ011. The procurement is conducted under solicitation SPE2DS-26-T-278F, issued by the Department of Defense’s Medical Supply Chain, with responses due by August 3, 2026, and the NAICS code 334510 applies. Bidder submissions must comply with all referenced technical, packaging, and marking directives to ensure acceptability.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CANNULA, NASAL, OXYGENThe contract specifies the procurement of nasal oxygen cannulas, described as disposable plastic devices with curved tubing, crush-resistant lumens, beveled tips, and a flexible lip plate, designed for nonsterile use. Each unit is packaged in quantities of 25, with a total order of two packages, totaling 50 units. The product is identified by NSN 6515-01-473-7526 and is subject to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-277D, has a response deadline of August 3, 2026, and delivery must be completed within 20 days of award to Fort Bliss, TX, 79918-2527. This is a federal procurement under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain, with Patrick Esposito as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPLINT, EXTREMITY SPLINThe contract pertains to the procurement of two Extremity Splint Kits, specifically medium-sized vacuum splints measuring 27.5 by 20 inches, constructed with vinyl-felt material and filled with fire-retardant polystyrene beads, conforming to the Deluxe Extremity Splint Kit component specifications. These splints are color-coded and intended for immobilization of extremities, with a unique NSN of 6515-01-398-9583 and a unit of issue of each. The solicitation, issued under number SPE2DS-26-T-278V, was posted on July 28, 2026, with responses due by August 3, 2026, and requires delivery within 84 days of award. The procurement is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance directed to APO, ZIP 96260-5479. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, mandates compliance with DLA packaging standards, applies covered defense information protocols, and includes a requirement for removal of government identification from non-accepted supplies. The point of contact for inquiries is Brooke Webb, reachable via email and phone provided in the contract data.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
PAD, WITCH HAZEL IMPREGThe product is a pad impregnated with witch hazel and glycerin, composed of 70 percent white cotton and 30 percent synthetic non-toxic fiber, with a pH range of 4.2 to 4.8. It is further treated with methylparaben USP at a concentration of 1:1000 and benzalkonium chloride USP at 1:30000, with purified water USP as the base. Each pad has a nominal diameter of 3 inches and is packaged in jars containing 40 units each. The item has a mandatory 36-month shelf life, with no extension permitted, and no more than five months may have passed from the manufacturer’s date to delivery to the government. All packaging must comply with commercial standards as specified in the procurement document, ensuring units are sealed in containers that protect against damage, and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and must include necessary identification and handling instructions. The item is subject to Defense Logistics Agency packaging and quality requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6510-01-047-5619, with a quantity of two jars required, to be delivered within 20 days of award.
Sanitary Paper Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GAUGE COVER RESPIROThe contract pertains to the procurement of a gauge cover designed for use with Mark-B and Mark-14 respirometers, identified by part number 00-145 and NSN 6515-01-477-4292, with a required quantity of one unit. The item is regulated by the FDA and must be supplied by Southern Safety Sales, Inc., with bidding details including manufacturer and source information clearly specified. Packaging must comply with commercial standards as outlined in DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in exterior packaging that guarantees safe delivery via common carrier at the lowest cost to the destination specified as Travis AFB, California, with delivery required within 20 days FOB destination. All markings must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and the item must be inspected and accepted at the point of delivery without variance in quantity. The contract is part of a federal solicitation issued under SPE2DS-26-T-277E, governed by DLA’s Master List of Technical and Quality Requirements, and requires compliance with defense information protocols. The bidder must provide full source and part details, and the procurement falls under NAICS code 339112 for surgical and medical instrument manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details