Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GEAR CLUSTER

Active
SPE4A0-26-T-4217Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a GEAR CLUSTER item with NSN 3020-00-916-3550 and part number 75331-2, supplied by HONEYWELL INTERNATIONAL INC., under solicitation SPE4A0-26-T-4217. Three units are required at a unit price of $3.00, for a total price of $9.00, with delivery due within five days FOB origin. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent, meaning no overruns or underruns are permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, packaging materials, and coding specified, and palletization must adhere to DLA packaging requirements. Marking is to follow standard guidelines without special codes. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols aligned to MIL-STD-1916 or ASQ H1331 Table 1, or comparable zero-based plans, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from non-accepted supplies are required. Delivery is to be shipped to the Tainan Branch Warehouse in Taiwan, with freight details and forwarding instructions governed by DLAD procedural notices. The contract includes specific government-use codes and reference identifiers, and the required delivery date is set for September 11, 2024, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026, under the NAICS code 333613 for mechanical power transmission equipment manufacturing.

General Info

HONEYWELL to supply three GEAR CLUSTER units at $3.00 each, FOB origin, delivery by Sept 11, 2024, per MIL-STD and DLA specs.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A0-26-T-4217 for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEAR CLUSTER
GEAR CLUSTER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
SPE4A0-26-T-4217
SECTION B
HONEYWELL INTERNATIONAL INC. 99193 P/N 75331-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017746114 0001 EA 3.000
NSN/MATERIAL:3020009163550
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DTW500
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
MARKFOR
DTW500
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
SPE4A0-26-T-4217
SECTION B
PR: 7017746114 PRLI: 0001 CONT’D
M/F: (TCN) PTW55V42461590
RDD:
PROJ: 9AB TP 1
SUPP ADD: DA4KMV SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:09/11/2024
SPE4A0-26-T-4217 NSN/Part Number: 3020-00-916-3550 Quantity: 3 EA Purchase Request: 7017746114QTY: 3 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L3-26-T-168Y
This contract pertains to the procurement of one unit of item NSN 3040017239146, identified by part number 227-0590 manufactured by CATERPILLAR INC, under solicitation SPE7L3-26-T-168Y. The delivery is required within 20 days of award, with shipment to be delivered FOB origin and inspected and accepted at the destination. The item must comply with all DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging codes, materials, and marking standards per MIL-STD-129 with no special marking required. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly authorized by specification. The item has no shelf life requirement. The delivery address is NMCB ONE at 477 MCKINNEY AVENUE, BLDG 200, GULFPORT MS 39501-5000, with a required shipment by the fastest traceable means—parcel post is prohibited. The purchase request number is 7017785989, and the unit of issue is EA with a total price of one dollar. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The contract is set for performance under a federal acquisition system, with the point of contact being Lee Miller at DLA, and the anticipated original delivery date is August 10, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTROL
Solicitation # SPE7L1-26-T-944P
This contract is for the procurement of a manual control lever, identified by NSN 3040-00-330-3262 and purchase request 7017775854, with a total quantity of 51 units to be delivered FOB origin within 273 days. The item is classified as a restricted source item requiring government engineering source approval and is defined by multiple Army drawings and technical data packages, some of which specify chemical agent resistant coatings in lieu of original finish requirements. The contract enforces stringent quality and compliance standards, including adherence to MIL-STD-130N for identification marking, MIL-STD-2073-1E for packaging, and MIL-STD-1916 or equivalent zero-based sampling plans with zero non-conformances required for acceptance. All components must originate from qualified suppliers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and the use of ozone depleting chemicals is strictly prohibited. The product is designated a critical application item and must conform to ISO 9001:2015 and tailored higher-level quality requirements, with inspection and acceptance occurring at origin. The contract requires submission of a first article for approval, with specific packaging and marking instructions, including bold red “FIRST ARTICLE” labeling on the outer container and advance notice to the testing facility. Specialty metal regulations apply due to the nature of the item, and packaging must meet DLA requirements including preservation level, wrap materials, and palletization per RP001. This solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333613, with a response deadline of August 20, 2026, and unit price set at $51.00 per unit with no variance allowed in quantity.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-169L
The contract specifies the procurement of a shaft with a shoulder, identified by NSN 3040-01-696-8685 and part number HAN8598-1, with a single unit quantity required for delivery within 20 days after contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. All items must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking applied. Palletization must adhere to DLA packaging requirements, and shipment must be sent via traceable freight methods—parcel post is explicitly prohibited. The delivery address is the Navy Logistics Center in Mechanicsburg, Pennsylvania, and the shipment is tracked under project ZNH TP 3 with a required delivery date of June 16, 2026. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals be submitted for approval unless already authorized by specification. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents approved by NAVSEA, with portable fluorescent lamps and instruments containing mercury requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by acquisition size and solicitation amendments. All terms are bound to the solicitation number SPE7L3-26-T-169L, issued under the DoD’s authorized unit of issue, with primary point of contact at DLA for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-169K
This contract is for a rigid connecting link with NSN 3040-41-000-2692 and part numbers 40009963 from General Dynamics Land Systems and Z002009-0 from Steyr Motors AG, requiring delivery of one unit within 20 days of contract award. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required and palletization adherence to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The product has no shelf life limitation. Shipment must be sent to the Military Sealift Command at 9284 Balboa Avenue, San Diego, CA 92123-5000, with transportation protocols governed by DLA procedural notes C19 and C20. The contract is tied to solicitation SPE7L3-26-T-169K, with a required delivery date of August 5, 2026, and was posted on August 9, 2026, with a response deadline of August 20, 2026. The NAICS code is 333613, and the contracting office is under the Department of Defense’s Land Supplier Operations Vehicle Support, with point of contact Lee Miller at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L3-26-T-169S
This contract solicitation under SPE7L3-26-T-169S requires strict compliance with first article testing and production lot testing protocols for item NSN/Part Number 0001S00000061, with a quantity of 29 units and a delivery timeline of 684 days ADO. The contractor must test one unit of the specified item and submit a complete first article test report within 120 calendar days of contract award, providing written notice to the contracting officer and quality assurance representative at least 14 days prior to shipment for government final acceptance testing. The government will respond within 30 days of receiving the report with conditional approval, approval, or disapproval. Production lot testing follows first article approval and requires the contractor to supply two randomly selected samples from the production lot for government testing, with sample size subject to approval if the specified quantity is ZZ. The contractor must cover all costs associated with samples consumed or destroyed during testing and ensure all units are shipped to the designated DLA facility in Columbus, Ohio, via traceable means with proper labeling and documentation including signed DD Forms 1222 and 250, test results, certifications, drawings, and a prepaid return shipping label. All documentation must comply with MIL STD 129 and include proprietary rights assertions. The solicitation is restricted to Women-Owned Small Businesses and includes no Fast Pay provision, with testing and submission procedures governed by FAR 52.209-3 and associated supplemental requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-U-0560
This contract specifies the procurement of a straight shaft with NSN 3040-01-327-0143 and part number 16-12373-000, under solicitation SPE7L1-26-U-0560, issued by the Department of Defense through the Land Supply Chain. A total of 87 units are required at a unit price of $87.00, with delivery due within 127 days after award. The contract is a total small business set-aside under NAICS code 333613, and all supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The item must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization strictly following DLA Packaging Requirements for Procurement. Government identification must be removed from non-accepted supplies, and covered defense information protections apply. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The unit of issue is each, and all packaging must reflect the specified QUP and U/I as defined in the contract. The point of contact for inquiries is Jennifer Payne, with responses due by August 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL, NO
Solicitation # SPE7L3-26-T-169P
This contract pertains to the procurement of a mechanical actuator with the NSN 3040-01-734-3067 and part number JE10612-101 from Juniper Elbow Co. Inc., requiring delivery of 15 units under solicitation SPE7L3-26-T-169P. The item is classified as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, as identified by R or I numbers. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for permitted functional uses such as in batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must meet shock-proof and double-containment requirements per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special codes applied. The units are to be delivered FOB origin, inspected and accepted at destination, with no variance allowed in quantity. The delivery deadline is 137 days from the contract award, with an original required delivery date of May 5, 2027, and a needed ship date of January 5, 2027. The consignee is DLA Distribution San Joaquin in Tracy, California, and transportation instructions follow DLAD Proc Notes C19 and C20. Item Unique Identification is not required per customer request, and the unit of issue is each, aligned with ANSI X12 standards.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L3-26-T-170C
The contract is for six straight shafts identified by NSN 3040-00-179-7113 under solicitation SPE7L3-26-T-170C, with a delivery deadline of 79 days after order. The item falls under NAICS code 333613 and is being procured by the Department of Defense through the Land Supplier Operations Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Export control regulations apply due to the presence of technical data subject to ITAR or EAR, prohibiting any export including disclosure to foreign persons without prior authorization from the Department of State or Commerce. Only authorized DLA contractors with JCP certification, completed training on handling DOD export-controlled data, and approved access through the DLA questionnaire may receive this technical data. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, with performance location in Anniston, Alabama, and primary point of contact listed as Karen McCarley.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4218
This contract pertains to the procurement of a gear cluster identified by part number 75331-2 and NSN 3020-00-916-3550, with a single unit requirement to be delivered within five days from the origin. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined, including dry preservation and designated unit and intermediate containers. Palletization follows DLA packaging standards and no special marking is required. Inspection and acceptance occur at origin, with zero nonconformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise defined, and unspecified attributes are treated as major. The contract includes cybersecurity compliance obligations under CMMC Level 2 self-assessment and covered defense information directives. Delivery is to Tainan, Taiwan, via the Parts-Attach General Depot, with freight forwarding managed under DLA procedural notes. The contract is issued under solicitation SPE4A0-26-T-4218, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOc Buys office.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CONTROL ASSEMBLY, PUSH-
Solicitation # SPE7L4-26-U-1069
The contract pertains to the procurement of a Control Assembly, Push-Pull, identified by NSN 3040-01-297-3396, with a quantity of eight units to be delivered within 127 days after order. The solicitation number is SPE7L4-26-U-1069, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, with a response deadline of August 24, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. The item is subject to stringent cybersecurity requirements, including CMMC Level 2 certification for third-party assessment organizations, and must comply with DFARS 252.225-7048 for controlled technical data. Export control restrictions apply due to ITAR or EAR regulations, prohibiting unauthorized disclosure or export to foreign persons, regardless of location. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access the technical data. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Configuration changes must follow formal engineering change proposal procedures, and deviations or waivers require formal variance requests. All supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. The contract requires strict compliance with all technical, security, environmental, and export control stipulations without exception.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, AXLE, AUTOMOTIVE
Solicitation # SPE7L4-26-T-6210
The item being procured is a shaft, axle, automotive, identified by NSN 2520-01-696-6848, with a total quantity of 86 units, under solicitation SPE7L4-26-T-6210, which is a total small business set-aside under NAICS code 333613. The contract requires full compliance with DLA’s technical and quality standards referenced in the Master List of Technical and Quality Requirements, and includes specific provisions for inspection and acceptance at origin, removal of government identification from non-accepted supplies, and adherence to Qualified Products Lists or Qualified Manufacturers Lists for any controlled components. All technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Packaging must meet DLA procurement standards, and delivery is required within 255 days after award. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance expected at Texarkana, Texas, 75507-5000. All responses must be submitted by August 20, 2026, and the solicitation was posted on August 9, 2026. Primary point of contact is Anna-Rachelle Betts, reachable via email and phone.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A0-26-T-4215
The contract is for the procurement of two socket head cap screws with part number 23-10572-275 and NSN 5305-01-336-6837, sourced from Daimler Truck North America LLC in Portland, OR. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging standards, and item identification marking is required under RQ017, though unique identification is waived per the service customer’s request. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with acceptance strictly requiring zero non-conformances unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. There is no shelf life requirement for the material. Delivery is due within five days of contract award, FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point at Fort Bragg, NC, with the freight and mark-for addresses matching. The item must be labeled and documented per the specified requirements, including the contract number SPE4A0-26-T-4215, purchase request 7017722270, and government-specific identifiers. The required delivery date is August 4, 2026, with a solicitation posting date of August 9, 2026, and response deadline of August 17, 2026. The contracting office is under the Department of Defense’s Aviation Supply Chain ESOc Buys, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4211
The contract pertains to SUPPORT, STRUCTURAL items with NSN/Part Number 1560-01-650-4509, for a quantity of four units, under Purchase Request 7017745999, with delivery required within five days after delivery order. The solicitation, numbered SPE4A0-26-T-4211, was posted on August 9, 2026, and responses are due by August 17, 2026. The work is classified under NAICS code 336413 and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance to occur at FPO, ZIP 96632. The contract is subject to stringent export control regulations under ITAR or EAR, meaning technical data associated with the item cannot be disclosed to any foreign person, whether inside or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on DOD export-controlled data, and approved access via the DLA questionnaire may receive the technical information. The primary point of contact for this solicitation is Danita Davis, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, TAPE
Solicitation # SPE4A0-26-T-4223
The contract is for the procurement of one tapered roller bearing, part number LM603049 902B3, with NSN 3110016496082, supplied by The Timken Corporation. Delivery is required within five days from the origin, FOB origin, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are determined by bearing type and closure per detailed specifications in MIL-DTL-197M, including application of protective lubricants and adherence to process controls outlined in paragraphs 3.3.4 through 3.9. Packaging must meet DLA’s RP001 requirements, and all items must be palletized accordingly. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is identified under purchase request 7017719867, and the solicitation number is SPE4A0-26-T-4223, with a response deadline of August 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A0-26-T-4225
The contract is for a single plain stud with NSN 5307-01-626-8290, quantity one, under solicitation SPE4A0-26-T-4225, with a response deadline of August 17, 2026, and delivery required within five days of award. The item is issued by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with performance required at Miramar, Florida, 33025-7971. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per bare item marking requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. The point of contact is Danita Davis, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE4A0-26-T-4220
The contract specifies the procurement of one unit of a spring tension clip with NSN 5340-01-588-4798 and part number 56-1209 from Goodrich Corporation, under solicitation SPE4A0-26-T-4220. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any other standards such as ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must follow Fed-Std-313 and TQ requirement IP025, with all packaging labeled per MIL-STD-129 and palletized according to RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The item must be shipped via traceable means, excluding parcel post, to the designated military destination at Fort Hood, Texas, with a required delivery date of August 4, 2026, and no need ship date provided. The contract incorporates all referenced DLA technical and quality requirements, which take precedence over other specifications, and the unit of issue is each.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE4A0-26-T-4222
This contract is for a single non-mechanical hose assembly identified by NSN 4720-01-713-7766 and part number AE2464689H0264, sourced from Sikorsky Aircraft Corporation with CAGE code 78286. The item must comply with a comprehensive set of technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and while item unique identification is not required, the contractor must follow strict configuration control and variance procedures. The product is classified as a Type I shelf-life item with a fixed 120-month (10-year) expiration date, marked with special code 32, and must meet non-tailored quality requirements based on ISO 9001:2015. All manufacturing and inspection activities must follow approved sampling standards—either MIL-STD-1916 or ASQ H1331—with zero non-conformances allowed in the sample unless otherwise specified. Measuring and test equipment used must be calibrated and verified, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with marking and palletization following DLA-specific guidelines; the item is not to be shipped via parcel post and must be delivered using the fastest traceable means. Delivery is required within five days of award, FOB origin, to a designated receiving location at Naval Air Station Fallon, Nevada, with no tolerance for quantity variance. The contract was issued under solicitation SPE4A0-26-T-4222 and is governed by Federal acquisition rules with full accountability for compliance across technical, quality, cybersecurity, and logistics dimensions.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, TAPERED
Solicitation # SPE4A0-26-T-4224
The contract is for one tapered bushing with NSN 5365-01-500-5183 and part number 117174, supplied by Reliance Electric Company DBA 71956, under solicitation SPE4A0-26-T-4224. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containment, with marking adhering strictly to MIL-STD-129 and no special markings required. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government delivery address in Jacksonville, Florida, with freight shipping directed to the Distribution Management Office. Quality and verification are governed by technical and quality requirements referenced from the DLA Master List, including sampling protocols based on MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance requires zero non-conformances unless otherwise specified. Physical identification of the item must meet RQ017 requirements, and all packaging and labeling must align with DLA standards. The unit of issue is each, priced at $1.00, with a total contract value of $1.00. The required delivery date is August 5, 2026, and the item is classified under NAICS code 332510 for federal procurement by the Department of Defense, Aviation Supply Chain ESO Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A0-26-T-4213
The contract is for one machine thread plug, part number 941279 with NSN 5365015772669, supplied by Parker Hannifin Corporation, required to be delivered within five days to Fort Bliss, Texas, under solicitation SPE4A0-26-T-4213. The item must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization specified under RP001. Inspection and acceptance occur at the destination, with zero non-conformances required under sampling protocols derived from MIL-STD-1916 or ASQ H1331, treating unspecified attributes as major and enforcing strict AQL levels for critical, major, and minor characteristics. The unit of issue is each, with no variance permitted in quantity, and shipment must be transported via traceable, non-parcel post means under a RDD/_NMCS designation with the ship-to, mark-for, and freight address all matching the same Fort Bliss military unit. Delivery is required by July 23, 2026, and all labeling, marking, and identification must follow RQ017 specifications, including removal of government identifiers from non-accepted supplies, while measuring and testing equipment must meet RT001 standards. The contract is under the Department of Defense, administered by the Aviation Supply Chain ESOC, with Danita Davis as the point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A0-26-T-4212
The contract is for the procurement of 3 units of a spacer, sleeve with NSN 5365-01-398-3676 and part number 7993-L-800 from Milwaukee Valve Co., Inc., under solicitation SPE4A0-26-T-4212. Delivery is required within five days of the contract award, with goods to be shipped FOB origin and accepted at the destination. The purchase quantity is fixed with no variance allowed, and inspection and acceptance occur upon arrival at the delivery point. Compliance is mandatory with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The material has no shelf life restriction. The shipment is to be sent using a traceable freight method, excluding parcel post, to the specified delivery address in Augusta, Georgia, with all packaging labeled per the contract’s unit of issue and quantity per unit pack. The required delivery date is July 30, 2026, and the point of contact for inquiries is Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325120
New
DIBBS
CALIBRATING GAS MIXTUR
Solicitation # SPE4A0-26-T-4214
The contract specifies the procurement of a single unit of a 5 ppm nitrogen dioxide (NO2) calibration gas mixture balanced with nitrogen, packaged in a 33 cubic foot cylinder containing 58 liters, under NSN 6830-01-609-2980 and manufacturer part number 600-0055-000 from Honeywell International Inc. The item is classified as a commercial off-the-shelf (COTS) product with a non-extendable shelf life of three months (Type I, Code C), requiring strict adherence to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129R for marking and labeling. The gas is identified as a hazardous material under UN1956, Hazard Class 2.2, and must be shipped in compliance with applicable hazmat regulations, with cylinders that cannot fit into UN-certified 4G fiberboard boxes required to be palletized as Load Type IX per MIL-STD-147. The item must be shipped FOB destination within five days of award, with zero tolerance for quantity variance, and cannot be delivered via parcel post—only traceable freight methods are permitted. The delivery address is the Naval Medical Readiness and Logistics Command at Cheatham Annex in Williamsburg, Virginia, and inspection and acceptance occur at the destination. The contract mandates that all shipping documentation and hazardous communication comply with OSHA and SDS regulations, requiring prior review and approval of safety data sheets and hazard labels by technical personnel, with copies submitted to the DLA Aviation HMIRS office. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like sensors or laboratory reagents specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must include a secondary containment barrier. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively.
Industrial Gas Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
MOUNTING BASE, ELECT
Solicitation # SPE4A0-26-T-4221
This contract specifies the procurement of a Mounting Base, Electrical with NSN 5975-01-160-6275 and part number 2041442-0102, for a single unit to be delivered in five days FOB origin. The item is classified as a Critical Application Item and must be supplied by one of three approved vendors: Honeywell International Inc DBA, Ontic Engineering & Manufacturing Inc, or Super Tek Electronics Inc. Delivery is required to Point Mugu, CA, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA Packaging Requirements. Special markings are not required, and hazardous material packaging guidelines apply. The shipment must be sent via the fastest traceable means, excluding parcel post, and is designated as RDD 999/NMCS. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes must be verified at specified levels. The contract incorporates a comprehensive set of technical and quality requirements from the DLA Master List, including cybersecurity compliance at CMMC Level 2, removal of government identification from non-accepted items, and tailored higher-level quality requirements for manufacturers and non-manufacturers. The purchase request number is 7017395882, the contract number is SPE4A0-26-T-4221, with a required delivery date of July 6, 2026, and the point of contact for inquiries is Danita Davis.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details