Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GEAR CLUSTER

Active
SPE7L4-26-T-5949Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five gear clusters, specifically spur gears identified by NSN 3020-01-228-7613, under solicitation SPE7L4-26-T-5949, with a response deadline of August 13, 2026, and a delivery requirement of 119 days after award. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Cybersecurity compliance mandates that any third-party assessment organization involved must be CMMC Level 2 certified. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, regardless of location, and necessitating adherence to DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export-controlled data training, and approval through the DLA Export-Controlled Technical Data Questionnaire. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament organization, with performance located in New Cumberland, Pennsylvania, and primary point of contact Anna-Rachelle Betts via email and phone provided.

General Info

Procure five spur gears under DOD contract with CMMC Level 2, ITAR/EAR controls, and restricted U.S./Canada certified access.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-T-5949 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEAR CLUSTER
GEAR CLUSTER, SPUR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3020-01-228-7613 Quantity: 5 EA Purchase Request: 7017697863QTY: 5 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE7M4-26-T-296W
The contract is for the procurement of five hydraulic accumulators, part number 608712 and NSN 3040-00-957-3601, supplied by EATON AEROSPACE, LLC, with a total value of $25.00 at $5.00 per unit. The item is classified as a critical application item and must be delivered in strict compliance with DLA packaging requirements, specifically ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, with no variance allowed in quantity—exactly five units must be delivered. Delivery is FOB origin with inspection and acceptance occurring at the destination, and delivery is required within 158 days of the contract award, with an original required delivery date of May 28, 2027, and a need ship date of January 19, 2027. The items must be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, with transportation handled according to DLAD Proc Note C19 for main shipment and C20 for first destination. Government identification must be removed from non-accepted supplies, and the solicitation number is SPE7M4-26-T-296W, issued under NAICS code 333613 by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7L2-26-T-0589
The contract involves the procurement of three manual control levers with NSN 3040-01-491-1954 under solicitation SPE7L2-26-T-0589, with a response deadline of August 13, 2026, and a delivery requirement of 245 days after award. The item falls under NAICS code 333613 and is sourced by the Department of Defense’s Land Supplier Operations Wheeled Vehicles office, with performance specified at Anniston, Alabama, 36201-4199. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and unauthorized removal of government identification from non-accepted supplies is prohibited. The technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification by a qualified third-party assessment organization, and all handling of controlled data must adhere to DFARS 252.225-7048 provisions for protection against unauthorized disclosure to foreign persons.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L3-26-T-143X
The contract is for the procurement of 155 units of a hydraulic cylinder assembly identified by NSN 3040-01-454-3533 and part number A23280Q9819, supplied by Meritor Industrial Products, LLC, for use on Model 1000M forklift trucks. The item is priced at $155.00 per unit, with a total contract value of $24,025.00, and must be delivered FOB origin within 336 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence of the DLA Master List of Technical and Quality Requirements. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the required ship date is July 16, 2027. Transportation logistics follow DLA Procurement Notes C19 and C20. This is a total small business set-aside solicitation under NAICS code 333613, issued by the Department of Defense under contract number SPE7L3-26-T-143X, with a response deadline of August 13, 2026. All technical and quality specifications referenced via R and I numbers are governed by the DLA Master List, with revisions controlled according to acquisition scale and amendment dates.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-144V
This procurement under solicitation SPE7L3-26-T-144V requires the delivery of three units of item 11610607 for first article testing within 180 calendar days of contract award to a designated government facility at Tinker Air Force Base. The government will conduct formal testing and issue written approval, conditional approval, or disapproval within 180 days of receiving the units; these first article samples will not count toward the total production quantity and will be retained by the government for potential use as a manufacturing standard or destroyed during testing. The contractor must deliver the full ordered quantity separately. Bidders are strongly encouraged to quote using quantity ranges due to fluctuating demand, though this flexibility does not extend to Auto IDC. Offers must not include covered telecommunications equipment or services as prohibited by FAR 52.204-24 and DFARS 252.204-7016. Compliance with domestic sourcing restrictions under the Berry Amendment and Buy American Act is mandatory, with thresholds lowered to $150,000; non-domestic material disclosures are required. Small business joint ventures must submit applicable certifications as outlined in FAR provisions. The vendor shipment module access is transitioning to DLA’s AMPS system, and contractors must register through AMPS to maintain shipping capabilities; schema updates are required for VSM WebServices users. Additive manufacturing is currently prohibited unless specifically approved by the contracting officer. The contract involves a single line item for 142 units with a 922-day delivery window, and all proposals must be submitted via DIBBS before the deadline. Offerors who cannot respond must file a “No Bid” notice to avoid assumptions of non-responsiveness.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-26-U-0529
The contract specifies the procurement of 24 rigid connecting links, also known as tie rods or actuators, with part number 4061T02G01 and NSN 3040-01-130-3184. These components are critical to the variable exhaust nozzle system of the F-404 engine used on the F/A-18 Hornet aircraft, constructed from titanium alloy, measuring 12.052 inches center to center, featuring a clevis on one end and a bearing on the other as an inseparable assembly. The contract enforces adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for packaging; all items must be marked and labeled per MIL-STD-129 and palletized in compliance with DLA packaging requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are assigned stringent verification levels or AQLs. The items are to be delivered FOB origin within 127 days with no variance allowed in quantity, and inspection and acceptance will occur at the destination. The contractor must also comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and the component is designated as a critical application item with approved manufacturers listed including New Hampshire Ball Bearings Inc, B & E Tool Company, Union Machine Company of Lynn, and General Electric Company. The contract is issued under SPE7L1-26-U-0529 as a DLA direct, CONUS solicitation with a unit of issue of EA and a total quantity of 24 units.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7M1-26-U-4866
The contract pertains to the procurement of three Cylinder Assembly, A units, identified by NSN 3040-01-569-2033 and CATERPILLAR INC part number 604-9008, under solicitation SPE7M1-26-U-4866, issued by the Defense Logistics Agency on behalf of the Maritime Supply Chain within the Department of Defense. This is a small business set-aside contract with a total estimated value ranging from $3,245 to $350,000, structured as an indefinite-delivery contract with a guaranteed minimum quantity of one unit and an estimated annual quantity of three units. Delivery is required within 127 days from the award date, with FOB Origin terms, and inspection and acceptance will occur at the destination. The contract mandates strict compliance with DLA Packaging Requirements for Procurement (RP001), ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Item Unique Identification (IUID) per MIL-STD-130 is required, and Class I ozone-depleting chemicals are strictly prohibited, overriding any conflicting specification requirements; any substitute chemicals require prior approval. All packaging must be palletized according to RP001 and marked with correct U/I and QUP as specified. Payment must be submitted electronically via WAWF, and the contractor must adhere to clauses governing cybersecurity, trafficking in persons, employment eligibility verification, sustainable procurement, and hazardous materials handling. Ocean transport must be conducted using U.S.-flag vessels unless a waiver is obtained, and compliance with NIST SP 800-171 and safeguarding covered defense information is mandated. Pricing for the line item is not fully populated but is subject to a zero percent variance in quantity. The contracting officer contact is Bryan Fair, and the contract incorporates numerous FAR and DFARS clauses, including those for contract changes, subcontracting, inspection, default, and export control, with deviations applied to several clauses effective February 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
POWER TAKEOFF, TRANS
Solicitation # SPE7L3-26-T-143Z
This contract pertains to the procurement of a Power Takeoff, Transmission with part number 5802076087 and NSN 2520-15-027-0892, for a quantity of nine units. All items must comply with technical and quality requirements referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with markings in accordance with MIL-STD-129 and no special marking codes applied. Palletization must follow RP001 guidelines, and the shipment must be delivered FOB origin to the designated DLA distribution facility in New Cumberland, PA, with a delivery window of 176 days from the contract award. The required delivery date is February 6, 2027, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, and transportation follows DLA procedural notes C19 and C20. The contract is issued under solicitation SPE7L3-26-T-143Z with a procurement request number of 7017696582 and unit price of $9.00 per unit, totaling $81.00. The item has no shelf life requirement, and the primary point of contact is Karen McCarley at the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7LX-26-U-9127
This contract is for the procurement of bevel gears under NSN 3020-01-363-8103, issued by the Defense Logistics Agency through a Total Small Business Set-Aside solicitation with NAICS code 333613. The item is a critical application component used in heavy vehicle systems, with specific authorized suppliers identified including Meritor Heavy Vehicle Systems, AMZ Alabama Inc., BAE Systems Tactical Vehicle Systems LP, and ND Defense LLC. The contract is structured as an Indefinite Delivery Contract (IDC) with an estimated quantity of 23 units to be delivered in a single shipment within 120 days after award. Delivery is FOB origin, meaning title and risk transfer to the government upon delivery at the contractor’s facility; inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, preservation method 33 with clean/dry condition and preservation material 49, and unit and intermediate containers as enclosed/dimensional with a palletization quantity of eight. Marking must adhere to MIL-STD-129 with special code 24 indicating open for inspection or use, and barcoding must meet DoD standards. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements identified by “R” or “I” numbers. The contract includes mandatory clauses covering cybersecurity, safeguarding of defense information, whistleblower protections, restriction on foreign telecommunications equipment, prohibition of hexavalent chromium, and compliance with NIST SP 800-171 requirements with approved deviations. Payment is to be processed electronically through Wide Area WorkFlow, and invoicing must be submitted under DLA’s mandated systems. Contractors must hold a valid Unique Entity Identifier and CAGE code and make accurate socioeconomic representations as a small business. No unit price is specified in the solicitation, and pricing is expected to be submitted as part of the offer; the overall contract value is estimated between $145.14 and $350,000. Proposals must be submitted electronically via the DIBBS portal by August 17, 2026, and the award will be based on technical acceptability and price, with an implied emphasis on lowest price technically acceptable methodology given the simplified acquisition nature.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
COOLER, FLUID, TRANSM
Solicitation # SPE7L1-26-U-0534
The contract solicitation SPE7L1-26-U-0534 is for the procurement of 23 units of a transmission fluid cooler under an indefinite-delivery contract with a guaranteed minimum of 3 units and a maximum value of $350,000.00. The item is identified by NSN 3040-01-575-6026 and must be delivered FOB Origin within 127 days of order placement, with no variance permitted in quantity. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence over all other standards, including specific palletization requirements under RP001 and marking and labeling per MIL-STD-129. Unit of issue is each, and Quantity per Unit Pack must match the contract specification. The contract is a total small business set-aside under NAICS code 333613, requiring offerors to represent their small business status and socioeconomic certifications such as WOSB, SDVOSB, HUBZone, or 8(a) status, though no specific offeror data is provided. Delivery inspection and acceptance occur at the destination by the Government, and all materials must conform to applicable packaging, preservation, and hazard communication standards, including submission of hazard warning labels and Safety Data Sheets prior to award if hazardous or radioactive materials are involved. Radioactive material shipments exceeding 0.002 microcuries per gram or 0.01 microcuries per item require advance notification. Ocean transportation, if used, mandates U.S.-flag vessels and prior notification to MARAD. Invoicing is required exclusively through WAWF, with payment processed per DoDAAC assignments not specified in the solicitation but to be detailed in the award. The contract incorporates multiple FAR and DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, small business representation, and safeguarding of government information systems, with deviations authorized under 2026-O0038 and 2026-00038. The solicitation closed on August 17, 2026, and must be submitted electronically through the DLA eProcurement Portal.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-905L
The contract pertains to the procurement of 76 spur gears identified by NSN 3020-00-861-3829 under solicitation SPE7L1-26-T-905L, with a total small business set-aside and a NAICS code of 333613. Delivery is required within 92 days of award, and the solicitation closes on August 13, 2026. Compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 is mandatory, requiring the vendor to be a certified third-party assessment organization. The item is subject to strict technical and quality requirements listed in the DLA Master List, including configuration change management, quality conformance inspections, and inspection and acceptance at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, who have completed required training and been cleared by DLA, may access the controlled technical data. All applicable DFARS provisions, including those governing export control and government identification removal, are in effect. Contract performance is located in Anniston, Alabama, with primary point of contact Matthew Lepak.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-T-903T
The contract involves the procurement of 88 bevel gearshafts under solicitation SPE7L1-26-T-903T, with a total performance period of 677 days from delivery order issuance. The requirement is designated as a Total Small Business Set-Aside and falls under NAICS code 333613 for agricultural, construction, and mining machinery manufacturing. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited, requiring approved substitutes where necessary. The item contains export-controlled technical data subject to ITAR or EAR regulations, with dissemination limited only to contractors holding approved US/Canada Joint Certification Program status, who have completed required training and received DLA authorization. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Inspection and acceptance occur at the manufacturer’s origin, and configuration changes must be managed through formal engineering change proposals or variance requests. Measuring and test equipment used in production must meet established standards, and the contractor must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All government-issued identification must be removed from non-accepted supplies prior to return. The point of contact for inquiries is Meghan Ruehle at the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
HEAD, LINEAR ACTUATI
Solicitation # SPE7L3-26-T-145B
This contract is for the procurement of two units of a HEAD, LINEAR ACTUATOR with NSN 3040999584802 under solicitation SPE7L3-26-T-145B, issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. Delivery must be completed within five days of order placement, with goods shipped FOB origin and inspected and accepted at the destination. The unit of issue is each, with no variance allowed in quantity, and the total contract value is $2.00 per unit. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting specification standards, and packaging must adhere to ASTM D3951 while following MIL-STD-129 marking and labeling protocols. Palletization must meet DLA Packaging Requirements for Procurement and the Unit of Issue and Quantity per Unit Pack must match the contract. Ozone-depleting chemicals are strictly prohibited, and any required substitutes must be pre-approved unless explicitly permitted by the specification. Shipment must use the fastest traceable method, excluding parcel post, and be addressed to the designated military activity in Jefferson City, Missouri, with a Required Delivery Date of July 9, 2026. The item is to be marked with the government-unique identifier W58MYQ and associated routing codes, and is subject to government-only tracking and disposition codes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7L4-26-U-1049
The contract solicitation SPE7L4-26-U-1049 is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency under the Department of Defense’s LSO Combat Vehicles and Armament office for the procurement of fitted vehicle covers with NSN 2540-01-507-7822. The contract has a maximum ceiling value of $350,000 and authorizes an estimated initial quantity of 17 units, with delivery required within 80 days from order placement under FOB Origin terms. All deliveries are restricted to the Continental United States and subject to destination inspection and acceptance by the government. Packaging and labeling must fully comply with MIL-STD-129 for identification, barcoding, and shipment documentation, superseding ASTM D3951 where applicable. Palletization follows RP001, DLA’s Packaging Requirements for Procurement. Hazardous materials must be packaged according to TQ Requirement IP025 and FED-STD-313, and labeled under OSHA’s Hazard Communication Standard (29 CFR 1910.1200), while non-hazardous items may use commercial packaging only if it meets ASTM D3951 without conflicting with the DLA Master List of Technical and Quality Requirements. The contract mandates electronic invoicing through Wide Area WorkFlow and requires full compliance with safeguarding requirements for covered defense information under DFARS 252.204-7012 and NIST SP 800-171 controls. All ocean shipments must use U.S.-flag vessels unless a formal waiver is obtained at least 45 days prior to sailing, with detailed reporting required to MARAD. The solicitation includes mandatory clauses on small business representation, equal opportunity, combating trafficking, employment eligibility verification, and prohibition of covered defense telecommunications equipment. Offerors must provide their Unique Entity ID and CAGE code and affirm compliance with socioeconomic and cybersecurity obligations. The contract is part of a simplified acquisition process, submitted via DIBBS by the August 17, 2026 deadline, and no options or extension clauses are provided beyond the one-year ordering period.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7L4-26-T-5953
The contract pertains to the procurement of one unit of preformed hose identified by NSN 4720-01-170-5006 and part number 10511782, with a total quantity of 13 units to be delivered under solicitation SPE7L4-26-T-5953. The item is classified as a critical application component and must comply strictly with DLA packaging requirements as outlined in RP001, superseding any other standards such as ASTM D3951. All packaging and labeling shall adhere to MIL-STD-129, with the unit of issue and quantity per unit pack defined by the contract. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occurring at the destination facility located at Tracy, California. The required delivery date is 158 days after award, with an original due date of March 25, 2027, and a needed ship date of January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition type. Transportation instructions are governed by DLA procedural notes C19 and C20. The contract specifies a fixed unit price of $13.00 per unit, totaling $169.00, and the point of contact is Anna-Rachelle Betts, reachable via DLA email and phone.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-T-5950
This contract specifies the procurement of a bracket, angle with NSN 5340-01-447-0485 and part number 12365165, requiring four units to be delivered within 209 days under solicitation SPE7L4-26-T-5950. Delivery is FOB origin with zero variance allowance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA requirements RP001 and MIL-STD-129 labeling, with hazardous materials following TQ requirement IP025 per Fed-Std-313 and non-hazardous materials packaged per ASTM D3951 only if not superseded by DLA standards. Palletization must conform to DLA packaging standards, and the unit of issue is each. Delivery is to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston AL 36201-4199, with a required ship date of March 11, 2027. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office with Anna-Rachelle Betts as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-5951
The contract specifies the procurement of 12 units of an air dryer and cooler system for pipeline applications under NSN 0001S00000053, with a delivery deadline 279 days after contract award. All components must conform to source-controlled drawings and originate from approved sources listed on those drawings. The product must comply with stringent technical and quality requirements outlined in the DLA Master List, including tailored higher-level quality standards, configuration change management procedures, and qualified manufacturers or products lists where applicable. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Sampling and verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Fat testing is required per two specified drawings, with two samples to be tested and 20 days’ notice provided to the government before testing begins. The contract mandates compliance with DLA packaging standards, measuring and test equipment requirements, and enforcement of quality assurance provisions. The purchasing agency is the Department of Defense under LSO Combat Vehicles and Armament, with performance to be delivered to Tracy, CA, 95304-5000. The solicitation, issued under SPE7L4-26-T-5951, closed for responses on August 13, 2026, with the contractor required to meet all technical, quality, and administrative conditions outlined in the document without deviation unless formally approved. The primary point of contact is Anna-Rachelle Betts at DLA, with all correspondence and inquiries directed through the provided email and phone number.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5958
This contract specifies the procurement of one unit of a box and accessories stowage item with NSN 2540-01-578-5169, under solicitation SPE7L4-26-T-5958, with a required delivery within ten days of contract award and delivery terms set at FOB origin. The item must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any conflicting specification requirements, including the prohibition of Class I ozone-depleting chemicals and the requirement for approved substitutes. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, and to DLA Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must conform to specified standards, and the unit must be physically identified in accordance with MIL-STD-130. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring strict compliance with procurement note H02. The delivery destination is US Army SSA Powidz AB, Poland, and the point of inspection and acceptance is at destination. The contract mandates a Certificate of Conformance unless explicitly withheld by a Quality Assurance Letter of Instruction, and all documentation must align with the exact revision levels of referenced technical data packages and drawings issued up through 2026. No quantity variance is permitted.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L4-26-U-1048
The contract pertains to the procurement of a Vehicular Bracket, Part Number 22-62169-201, identified by NSN 2590015763581, with a quantity of 14 units to be delivered within 85 days under the solicitation SPE7L4-26-U-1048. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but is superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence; all packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative chemicals require prior approval unless explicitly authorized by specification. The unit of issue is each, with a unit price of $14.00, resulting in a total price of $196.00. The contract is issued by the Department of Defense, Office of the LSO Combat Vehicles and Armament, and is subject to the DLA Direct, CONUS coverage. Compliance with all technical and quality standards referenced in the DLA Master List, as defined by the solicitation or award date, is mandatory. The designated point of contact is Karryn Hoston, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, HAND BRAK
Solicitation # SPE7L4-26-U-1046
This contract pertains to a parts kit for a hand brake, identified by the NSN 2530-01-652-7219 and part number 12449370, with a quantity of 19 units to be delivered under solicitation SPE7L4-26-U-1046. The delivery is required within 75 days after award, with delivery terms set at FOB origin, and no variance in quantity is permitted—precisely 19 units must be supplied. All items must comply with stringent technical and quality specifications referenced from the DLA Master List, including tailored higher-level quality requirements and packaging standards aligned with MIL-STD-2073-1E, Appendix D, for kits. Packaging and marking must adhere to MIL-STD-129 and DLA’s procurement packaging requirements, with no ozone-depleting chemicals allowed under any circumstances; substitutions require prior approval unless explicitly authorized. Inspection and acceptance occur at the origin, and all items must be packaged with preservation methods designated as ZZ, with unit packaging marked appropriately under packing code U. The contract is set aside entirely for small businesses and is managed by the Department of Defense’s Combat Vehicles and Armament division, with Heather Kessler listed as the primary point of contact.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
BRACKET, TOW HOOK
Solicitation # SPE7L4-26-T-5952
The contract pertains to the procurement of one Bracket, Tow Hook with NSN 2540-01-699-9375 and purchase request number 7017696424, under solicitation SPE7L4-26-T-5952. The item must adhere to strict technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The part must be manufactured and packaged in accordance with TDP Revision A Gen 1 based on reference drawings 19207 12644209 and 19207 12644210, with the most recent revision dated June 30, 2024. Packaging must meet MIL-STD-2073-1E specifications, including preservation method 10, packaging material code 00, wrap material FA, and unit container D3, with marking required to comply with MIL-STD-129 and no special marking codes applied. Palletization must follow DLA Packaging Requirements for Procurement, and the item is to be delivered FOB origin to the specified receive warehouse in Tracy, California. Inspection and acceptance occur at destination with zero variance allowed in quantity. The required delivery date is March 4, 2027, with a lead time of 202 days. The contract is administered by the Department of Defense, LSO Combat Vehicles and Armament, with primary point of contact Anna-Rachelle Betts.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
FLOAT, BALLOON
Solicitation # SPE7L4-26-T-5948
The contract pertains to the procurement of 50 units of FLOAT, BALLOON under solicitation SPE7L4-26-T-5948, with a response deadline of August 13, 2026, and delivery required within 84 days after award. The item is classified under NAICS code 326299 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament organization, with performance located in San Diego, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning unauthorized disclosure—包括 to foreign nationals within the U.S.—is prohibited without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completion of required DLA export control training, and formal approval from DLA may access the controlled data. The point of contact for inquiries is Kristen Elliott, reachable via email and phone listed in the contract details.
All Other Rubber Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5956
The contract specifies the procurement of 37 LEVER, BREECHBLOCK, COCKING components identified by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5956, with a delivery deadline of 178 days after award. The item is classified as a defense article subject to the International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls. Failure to provide proof of DDTC registration will render any offer ineligible for award. Technical data associated with the item is export-controlled under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization. The procurement is subject to strict packaging standards, prohibition of ozone-depleting chemicals, and cybersecurity requirements mandating CMMC Level 2 certification. Government identification must be removed from non-accepted supplies, and demilitarization procedures apply as the item falls under Category I munitions. The contract is managed by the Department of Defense's Combat Vehicles and Armament office, with performance directed to Cherry Point, North Carolina, and primary contact information provided for inquiries.
Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
EQUIPMENT KIT, VEHIC
Solicitation # SPE7L4-26-T-5947
The contract solicitation SPE7L4-26-T-5947 seeks the procurement of 10 Equipment Kits, VEHIC with NSN 2540-01-707-7193 under a Total Small Business Set-Aside, with a response deadline of August 13, 2026, and a delivery requirement of 144 days after order. All components must conform to source control drawings and be sourced exclusively from approved suppliers listed on those drawings. The equipment must comply with stringent technical and quality standards referenced from the DLA Master List, including requirements for configuration change management, qualified products and manufacturers lists, and physical marking of bare items. The kit must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. Cybersecurity compliance is mandatory, requiring CMMC Level 2 certification by a certified third-party assessment organization, and the handling of technical data is subject to export controls under ITAR or EAR, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA training and documentation. Inspection and acceptance may occur at the manufacturer’s origin, and vendor item control drawings govern all aspects of design and fabrication. Technical data associated with the kit is export-controlled, and its dissemination to foreign persons—even within the U.S.—is prohibited without explicit authorization. The delivery location is New Cumberland, PA, and primary point of contact is Anna-Rachelle Betts of the Department of Defense’s LSO Combat Vehicles and Armament office.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5943
The contract pertains to the procurement of a single unit of a box and accessories designated by NSN 2540016429281 and part number B38, supplied by SIEMENS ENERGY AND AUTOMATION INC, under solicitation SPE7L4-26-T-5943. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must conform to RP001 specifications. Hazardous materials, if applicable, must meet TQ requirement IP025 per FED-STD-313, while non-hazardous items must be commercially packaged. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly authorized by specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated military address at Fort Hood, Texas, with specific marking and shipment instructions including the TCN W80XYJ62080280 and project code TP 1. The required delivery date is July 30, 2026, and all government-specific identifiers and codes must be accurately applied for tracking and compliance.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details