Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GEAR, SPUR

Active
SPE7L1-26-T-840LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single spur gear identified by part number 8738923 and NSN 3020-00-690-2892, with a total quantity of one unit priced at $1.00. Delivery is required within ten days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, and marking must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the item must be shipped via the fastest traceable means, excluding parcel post, to the designated military facility in Bluffdale, Utah. The contractor must meet cybersecurity requirements under CMMC Level 2 through a self-assessment and incorporate technical and quality standards referenced from the DLA Master List. The contract is issued under solicitation SPE7L1-26-T-840L, with a response deadline of July 27, 2026, and a required delivery date of July 14, 2026. The NAICS code is 336992, and the contracting activity falls under the Department of Defense’s Land Supply Chain.

General Info

One spur gear, part 8738923, $1.00, delivery by July 14, 2026, to Bluffdale, UT, CMMC Level 2, MIL-STD compliant.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

17800 SOUTH CAMP WILLIAMS ROAD, BLUFFDALE, UT, 84065-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-840L for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEAR,SPUR
GEAR, SPUR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PER JUSTIFICATION FOR OTHER THAN FULL AND OPEN
COMPETITION DATED 27 SEPT 01, PART
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
DETAILED DRAWING (ONE ITEM) SUPPLEMENTAL QUALITY ASSURANCE PROVISIONS (SQAP) ALL TYPES. ASTM..................CODE: 81346 AMERICAN SOCIETY FOR TESTING AND MATERIALS 1916 RACE STREET PHILADELPHIA PA 19103 TELEPHONE: 610-832-9500 TELEFAX: 610-832-9555 THE SPECIFICATION OR STANDARD CITED IS TO BE USED IN LIEU OF THE DOCUMENT IDENTIFIED WITHIN THE PARENTHESES.
LAKE SHORE SYSTEMS, INC. 34712 P/N 8738923
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017509517 0001 EA 1.000
NSN/MATERIAL:3020006902892
SPE7L1-26-T-840L
SECTION B
PR: 7017509517 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GC CUSH/DUNN MAT:NS CUSH/DUNN THKNESS:C
UNIT CONT:EC OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W67TNU
W8XN UT ARNG UTES 1
BLDG 2500 UTES
17800 SOUTH CAMP WILLIAMS ROAD
BLUFFDALE UT 84065-0000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W67TNU
W8XN UT ARNG UTES 1
BLDG 2500 UTES
17800 SOUTH CAMP WILLIAMS ROAD
BLUFFDALE UT 84065-0000
US
MARKFOR
W67TNU
W8XN UT ARNG UTES 1
BLDG 2500 UTES
17800 SOUTH CAMP WILLIAMS ROAD
BLUFFDALE UT 84065-0000
US
M/F: (TCN) W67TNU61880003
RDD: 555
PROJ: TP 2
SUPP ADD: W81KK3 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A3A DIST: ADV: FC: 62
SPE7L1-26-T-840L
SECTION B
PR: 7017509517 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:07/14/2026
SPE7L1-26-T-840L NSN/Part Number: 3020-00-690-2892 Quantity: 1 EA Purchase Request: 7017509517QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
FENDER, VEHICULARThe Defense Logistics Agency is seeking two vehicular fenders under NSN 2510-01-706-2537 through a Firm Fixed Price solicitation, with a required delivery within 123 days after order. This is a Fair Opportunity Procurement under the Joint Light Tactical Vehicle Competitive Initiative Program, restricted exclusively to listed JLTVCI Prime Contract holders, including Trimian Industries Inc., Oshkosh Defense LLC, AM General LLC, Ruta Supplies Inc., and SupplyCore LLC. Only these entities are eligible for award; all other contractors are disqualified unless pricing from prime holders is deemed not fair and reasonable, triggering a potential transition to a simplified acquisition. The items must conform strictly to Technical Data Package Rev A Gen 1 and multiple engineering drawings dated between 2017 and 2026. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, RP001 DLA packaging requirements, and Special Packaging Instruction AK17062537 Revision A. Technical and quality requirements identified by R or I numbers from the DLA Master List are incorporated by reference. The contract mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 certification for any Third-Party Assessment Organization involved. Export-controlled technical data subject to ITAR or EAR regulations applies, requiring offerors and their supply sources to hold approved US/Canada Joint Certification Program status, complete mandatory DOD export control training and the DLA questionnaire, and obtain DLA approval for data access. All invoicing must be processed electronically via Wide Area Workflow using a SAM-registered point of contact. The inspection and acceptance point is at the destination, with Certificate of Conformance procedures authorized unless withheld by a Quality Assurance Letter of Instruction. The solicitation is not a small business set-aside, and no government estimate or ceiling price is provided. Responses must be submitted to the DLA Land and Maritime Strategic Acquisition Program Directorate by the deadline of July 24, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336992
New
Federal
Bullet Resistant Flat Sheet Glass BR 4 and BR 6This solicitation seeks 36 flat glass sheets of BR-4 ballistic glass and 36 flat glass sheets of BR-6 ballistic glass, each measuring 12 inches by 12 inches, in support of the U.S. Army Corps of Engineers Headquarters. The procurement is structured as a Firm-Fixed Price delivery order with a 100% small business set-aside under NAICS code 336992, exclusively open to small businesses in compliance with FAR 19.5. The required products must meet or exceed UL 752 standards for ballistic resistance, accompanied by certified test reports, and will be delivered FOB Destination to Summit Point, West Virginia, with the government bearing all transportation costs. A single line item covers shipping and freight, and all pricing must be submitted via an Excel-based price worksheet alongside a technical capability statement not exceeding two pages. The Government will award the contract to the technically acceptable offer with a fair and reasonable price, with no weighted scoring factors specified beyond these two criteria. All offerors must maintain an active registration in the System for Award Management (SAM), provide their DUNS and Cage Code numbers, and submit proposals electronically by the closing date of July 17, 2026, at 10:00 AM ET to the designated points of contact. The solicitation includes mandatory clauses such as Prohibition on Requiring Certain Internal Confidentiality Agreements, System for Award Management-Maintenance, Child Labor Protections, Combating Trafficking in Persons, Addressing DEI Discrimination, Buy American Requirements, and prohibitions on acquiring products from the Xinjiang Region and the Maduro Regime. Contractors must use Wide Area WorkFlow for electronic invoicing and receiving reports, and compliance with antiterrorism training, security exclusions, and whistleblower protections is required. The acquisition is subject to deviations to multiple FAR clauses, including those governing small business set-asides, commercial item contracting, and payment procedures. Failure to comply with SAM registration, electronic submission protocols, or certification requirements will render a proposal ineligible.
W4LD USA Hecsa

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336992
New
Federal
BOAST RFOP - Mount, Telescope - NSN: 1240-01-277-0473
W6QK Acc- Dta

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336992
New
DIBBS
MAINTENANCE KIT, VEHThe contract pertains to the procurement of a maintenance kit for vehicles, specifically a parts kit for blades, identified by NSN 4910997248204 and part number KP00054 from Pearson Engineering Limited. The item is classified as a commercial item, and delivery is required within 181 days after the order date, with a target delivery date of January 14, 2027. All supplies must be delivered FOB origin, inspected at destination, and accepted at destination. Packaging must conform to MIL-STD-2073-1E, Appendix D, for kits, with preservation methods, materials, and wrapping specified but left as ZZ for contractor determination, while drying is mandatory. Marking must comply with MIL-STD-129, including machine-readable barcodes and special marking code ZZ for unique requirements, and all packages must be labeled with the DLA Distribution facility address in New Cumberland, PA. The contract prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and requires approval for substitute chemicals unless expressly permitted. Compliance with the DLA Master List of Technical and Quality Requirements governs all technical and quality standards referenced through R and I numbers. The contract incorporates multiple FAR and DFARS clauses, including requirements for small business representation, equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and safeguarding of information systems. Special attention is given to NIST SP 800-171 compliance and subcontracting for commercial products under DFARS provisions with specific deviations authorized. Payment must be submitted through WAWF, and invoicing is restricted to fixed-price delivery under a unit of issue EA, with a unit price of $1.000 and zero variance allowed in quantity. The contract includes provisions for whistleblower rights, disclosure of information, limitations on third-party data use, and levies on payments, and enforces compliance with all DoD and DLA packaging, labeling, and transportation protocols. No detailed evaluation factors or contract value are specified, though the solicitation mandates submission via DIBBS and requires offerors to provide UEI and CAGE codes while representing their small business status if applicable. The contract remains silent on key personnel, OCI mitigation, or contract options, with administration details such as the COR and payment office to be provided in the award documentation.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 336992
New
DIBBS
CLEVIS, ROD ENDThe contract pertains to the procurement of 33 units of a CLEVIS, ROD END BRACE LINK, LONG with NSN 5340-01-568-4808 under an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The solicitation, numbered SPE7LX-26-U-8522, is a Total Small Business Set-Aside under NAICS code 336992, with a maximum contract value of $350,000 and a 51-day delivery requirement after order placement. Delivery is FOB origin, and acceptance occurs at the manufacturing facility, with inspection governed by MIL-STD-1916 and adherence to zero non-conformance thresholds for critical attributes. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including barcoding and preservation standards, and hazardous materials must be labeled per OSHA’s Hazard Communication Standard. The contract includes stringent export control requirements under ITAR or EAR, restricting technical data access to DLA-approved contractors who possess a US/Canada Joint Certification Program credential, have completed required training, and passed the DLA questionnaire. Cybersecurity obligations are enforced via NIST SP 800-171, with mandatory reporting of cyber incidents and safeguarding of covered defense information, while prohibited telecommunications equipment from certain foreign entities is explicitly banned. Subcontracting is permitted under FAR clauses 52.244-6 and 252.244-7999, with incentives for accelerated payments to small business subcontractors. Invoicing must be processed electronically through WAWF using specified document types, and payment certification is managed by a Local Processing Office whose details will be determined upon award. The solicitation requires offerors to submit representations regarding small business status, UEI, CAGE codes, and compliance with defense telecommunications restrictions under DFARS 252.204-7016 and 7017, with violations triggering mandatory disclosures. No evaluation factors or key personnel requirements are outlined, and contract options, security clearances, or organizational conflict of interest provisions are absent. All data handling, delivery, and compliance obligations are bound by a comprehensive suite of FAR and DFARS clauses, including those on changes, inspection, default, and unenforceable obligations, with multiple deviations applied to clauses
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 336992
New
DIBBS
MOLDING, METALThis contract specifies the procurement of metal molding components under solicitation SPE7L3-26-T-121P, with a single line item requiring ten units of NSN 2590-01-568-5877 at a unit price of $10.00, totaling $100.00. The item is designated as a restricted source requiring government engineering source approval and is classified as a critical application item, with approved suppliers limited to ND DEFENSE LLC and NATIONAL SEATING COMPANY. Delivery must be made FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 but is superseded by all applicable DLA Master List of Technical and Quality Requirements, with labeling and palletization strictly following MIL-STD-129 and RP001 standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is October 14, 2026, with a need ship date of December 3, 2026. Transportation directives are governed by DLAD PROC NOTES C19 and C20. The contract was issued by the Department of Defense under the NAICS code 336992, with Viviane Kounkorgo listed as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
ARMOR, SUPPLEMENTAL,The solicitation SPE7L4-26-T-5685 seeks seven units of supplemental armor with NSN 2540-01-533-8142 for delivery to the DDSP New Cumberland Facility in Pennsylvania, with a delivery schedule of 230 days after order placement, and FOB origin terms apply. All deliverables must comply with stringent packaging and marking standards, including MIL-STD-129 for labeling and barcoding, ASTM D3951 for non-hazardous packaging, and FED-STD-313 and TQ IP025 for hazardous materials, with DLA’s RP001 governing palletization. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce before any disclosure to foreign persons, domestically or abroad, with DFARS 252.225-7048 mandating compliance; access is restricted to DLA contractors who hold JCP certification, have completed required training, and received explicit approval from the DLA controlling authority. Cybersecurity requirements include mandatory CMMC Level 2 certification for the contractor and its third-party assessors, with adherence to NIST SP 800-171 and the Basic Safeguarding of Covered Contractor Information Systems clause to protect controlled unclassified information. The contract imposes comprehensive compliance obligations including the Hazardous Materials Identification and Safety Data Sheet requirement, Sustainable Products standards, Employment Eligibility Verification, Combating Trafficking in Persons, and Equal Opportunity for Workers with Disabilities, all under deviation 2026-00038. Inspection and acceptance occur at the destination facility, governed by FAR 52.246-2, requiring contractors to maintain a qualified inspection system aligned with SAE AS9003 or ISO 9001, and to ensure all items meet applicable quality standards. Invoicing must be submitted exclusively through WAWF, with payment routed using a designated DoDAAC, and no contract value is specified due to the absence of unit pricing data. The solicitation requires submission via DIBBS by July 27, 2026, with all proposers obligated to provide accurate UEI and CAGE codes and to certify their size and socioeconomic status, including potential eligibility for small business, WOSB, SDVOSB, HUBZone, or SDB programs; joint ventures must
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
ARMOR, SUPPLEMENTAL, SMAThis contract requires the delivery of two units of supplemental armor for small arms, identified by NSN 2540-01-533-8038 and part number 0257027365-00, under solicitation SPE7L4-26-T-5682. The items must be delivered FOB origin within 134 days of contract award, with no variance allowed in quantity, and are subject to inspection at the destination. Packaging must strictly comply with DLA’s requirements, including MIL-STD-129 labeling and RP001 palletization standards; if the material is hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025, otherwise commercial packaging under ASTM D3951 is acceptable, though all DLA Master List requirements take precedence. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contractor must comply with CMMC Level 2 self-assessment requirements and ensure all government identification is removed from non-accepted supplies. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 9, 2026, and the original delivery deadline was October 14, 2026. The contract is issued under the Department of Defense, with technical and quality requirements referenced from the DLA Master List, and all unit of issue and packaging data must be applied as specified.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
ARMOR, SUPPLEMENTAL,This contract, issued under solicitation SPE7L4-26-T-5704 by the Department of Defense’s LSO Combat Vehicles and Armament office, calls for the delivery of two units of supplemental armor plate identified by NSN 2540015548540, with delivery required within five days after award by July 15, 2026. The item must be shipped FOB origin, with title and risk of loss transferring to the government upon loading at the contractor’s facility, and final inspection and acceptance occurring at the destination: Fort Polk, Louisiana. Packaging requirements are stringent and governed by DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous items must be commercially packaged per ASTM D3951 unless overridden by a DLA technical requirement, while hazardous materials must comply with TQ Requirement IP025 and FED-STD-313. All packaging and labeling must adhere fully to MIL-STD-129, including barcoding and palletization per RP001, and no government identification may be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The contract incorporates multiple cybersecurity and data protection mandates, including CMMC Level 2 self-assessment compliance and adherence to NIST SP 800-171 requirements for safeguarding covered defense information, along with provisions requiring notification of potential safety issues and compliance with hazard communication standards. Contractors must register in and use Wide Area WorkFlow for invoicing, and all proposals must be submitted electronically via the DLA Internet Bid Board System by the July 27, 2026 deadline. The contract includes clauses on small business representation, employment eligibility, trafficking in persons, accelerated payments to small business subcontractors, unauthorized obligations, and whistleblower rights, alongside deviations to standard FAR clauses regarding subcontracts, disclosure of information, and compensation of former DoD officials. No unit pricing or total contract value is specified in the available documentation, and while representations regarding Unique Entity ID, CAGE code, and socioeconomic status are required, no affirmations from the offeror are present in the provided content.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336992
New
DIBBS
DEFLECTOR ASSEMBLYThe contract is for the procurement of 66 units of a Deflector Assembly with a unit price of $66.00, resulting in a total contract value of $4,356.00, under solicitation SPE7L1-26-T-792S, issued by the Defense Logistics Agency’s Land Supply Chain under a Total Small Business Set-Aside. The item, identified by NSN 2590014791562, must be delivered FOB Origin by December 5, 2026, with no tolerance for quantity variance, to the designated delivery point at DDSP New Cumberland Facility in Pennsylvania. All packaging and labeling must strictly adhere to MIL-STD-129 for marking and barcoding, with palletization conforming to RP001: DLA Packaging Requirements for Procurement, and general packaging must meet ASTM D3951 unless superseded by higher-priority requirements in the DLA Master List of Technical and Quality Requirements. The product must not contain Class I ozone-depleting chemicals, and any substitute materials must be approved prior to use without altering underlying product specifications. The contractor must comply with all applicable FAR and DFARS clauses, including those addressing employment opportunities for workers with disabilities, combating human trafficking, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity safeguards, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The offeror must be a registered small business with an active UEI and CAGE code, and full representations regarding size status and socioeconomic categories must be certified via SAM.gov. Invoicing is required through WAWF as a fixed-price delivery, with inspection and acceptance occurring at the destination by government personnel. The contract includes provisions for whistleblower rights, disclosure of information, and safeguarding of covered defense information in alignment with NIST SP 800-171 and other cybersecurity requirements. Any hazardous or radioactive materials must be labeled and documented per federal and military standards, with approvals submitted in advance. All submissions must be made electronically via DIBBS by July 16, 2026, with primary point of contact being Adam Howell of DLA.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 336992
New
DIBBS
KIT, HEAT EXCHANGERThe contract issued by the Defense Logistics Agency (DLA) under solicitation number SPE7L1-26-T-845W is a total small business set-aside for the procurement of 83 kits of heat exchangers, designated by NSN 5340015665655 and part numbers 1842127C93 and 1842127C94, sourced from ND DEFENSE LLC. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 221 days from award and a need ship date of March 6, 2027, following an original required delivery date of October 14, 2026. The FOB point is origin, and inspection and acceptance occur at the destination. All items must be packaged and labeled in strict compliance with MIL-STD-129 for marking, labeling, and barcoding, and palletization must adhere to RP001, DLA’s Packaging Requirements for Procurement. If the material is classified as hazardous per FED-STD-313, packaging must meet TQ Requirement IP025; otherwise, commercial packaging under ASTM D3951 is required, though DLA’s Master List of Technical and Quality Requirements takes precedence over ASTM standards. The contract mandates full compliance with all applicable DFARS and FAR clauses, including prohibitions on hexavalent chromium, restricted Chinese military company supplies, export-controlled items, and the use of mandated arbitration agreements. Cybersecurity protections under 252.204-7012 and mandatory reporting of cyber incidents within 72 hours are required, along with adherence to the Hazard Communication Standard and prohibition on storing or disposing of hazardous materials without authorization. Payment must be processed via Wide Area WorkFlow (WAWF), and offerors must hold a valid Unique Entity ID and CAGE code. The solicitation is restricted to small businesses, and contractors must self-represent their size and socioeconomic status in SAM.gov. All proposals must be submitted electronically through the DLA Internet Bid Board System (DIBBS) by the deadline of July 27, 2026, and no pricing data is currently filled in the contract line item, though historical unit costs for similar items range between $71.08 and $72.79.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336992
New
DIBBS
GEAR CLUSTERThe GEAR CLUSTER item is procured under solicitation SPE7L1-26-T-840J with a single unit requirement of 1 EA, identified by NSN 3020-00-690-2760 and part number 8738927. Manufacturing must utilize a metal casting process, requiring specific tooling, and sourcing guidance is provided through DLA’s Aviation or Land & Maritime Supply Chains teams. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition scale. Delivery is due within 10 days of contract award, FOB origin, with no tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative method 20, wrap material GH, and cushioning JC with specified thickness, all contained in an E5 unit container and marked per MIL-STD-129 with no special markings. Palletization must adhere to DLA packaging standards, and the item must be shipped by the fastest traceable means, excluding parcel post, to the designated government facility in Bluffdale, Utah. The required delivery date is July 14, 2026, with a response deadline of July 27, 2026, and the primary point of contact is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
Supply of Protective Dust and Moisture Seal CapsThe contract calls for the supply of 1,497 protective dust and moisture seal caps, identified by NSN 5340-01-632-8239 and part number 806661-01, for use by the Department of Defense. These components are critical for safeguarding equipment against environmental exposure, ensuring operational readiness in demanding conditions. Delivery must be completed in accordance with defense logistics standards, and all invoicing must comply with the Wide Area WorkFlow system to facilitate seamless payment processing and contractual accountability. The requirement is classified as a subcontract under NAICS code 332510, indicating manufacturing of other fabricated metal products, and performance is specifically designated for New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation was posted on July 17, 2026, with responses due by July 23, 2026, providing a narrow six-day window for qualified vendors to submit proposals. The contract is managed under the Land Supply Chain division of the Department of Defense, underscoring its importance to ground equipment maintenance and logistics sustainment.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332613
New
DIBBS
Small Business Subcontracting ParticipationSmall businesses certified as HUBZone, SDVOSB, WOSB, or DBE are invited to participate as suppliers of springs or as distributors under the Nonmanufacturer Rule to support prime contractors seeking evaluation preferences in a Department of Defense procurement. The opportunity is tied to NAICS code 332613 for spring manufacturing and requires eligible firms to provide springs directly or act as a distributor in compliance with subcontracting guidelines designed to enhance small business involvement. Performance of the work is centered in Greensboro, North Carolina, with a zip code of 27409, and responses must be submitted by July 21, 2026. Participation is intended to strengthen the supply chain through targeted subcontracting opportunities that align with federal small business objectives, though the exact scope of requirements and volume of expected deliveries are not specified in the posting. Interested parties should access the full solicitation via the provided DIBBS link for detailed submission instructions and evaluation criteria.
Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Greensboro, NCThe contract requires the transportation and delivery of packaged springs to Greensboro, NC, with full compliance to DLAD Proc Note C20 and federal logistics standards, ensuring all shipping procedures meet Department of Defense specifications. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of freight, and the place of performance is firmly designated as Greensboro with a zip code of 27409. The solicitation was posted on July 17, 2026, with a strict response deadline of July 21, 2026, leaving a four-day window for potential vendors to submit proposals. The contracting agency is the Land Supply Chain under the Department of Defense, and while specific contact details are not provided, the official solicitation can be accessed via the DIBBS platform using the referenced link.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Palletization ServicesThe contract requires the provision of packaging, preservation, and palletization services for springs in full compliance with military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all procedures meet Department of Defense requirements for durability, protection, and traceability during storage and transit. All items must be properly marked and aligned with DLA RP001 guidelines to guarantee accurate identification and inventory management across the supply chain. Work must be performed with strict adherence to specified military specifications to maintain readiness and logistical efficiency. The solicitation, issued by the Department of Defense under the Land Supply Chain division, is categorized as a subcontract with a NAICS code of 493190 and has a response deadline of July 21, 2026. Performance is required at the designated location in Greensboro, North Carolina, with a ZIP code of 27409. The posting date indicates the opportunity was made available on July 17, 2026, and interested parties must submit their proposals within the four-day window to be considered. All activities must comply with federal procurement protocols and be executed to ensure seamless integration into DLA logistics systems.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
Compression Spring Supply (NSN 5360003912317)The contract requires the manufacture and supply of 1,667 helical compression springs to meet precise military specifications under National Stock Number 5360003912317, ensuring full compliance with established material and dimensional standards. First article testing is a mandatory requirement to verify that the initial production units conform to all technical and performance criteria outlined in the military specifications. The springs must be produced and delivered in alignment with quality control protocols typically expected for defense-related components, with the place of performance specified as Greensboro, North Carolina, 27409. This subcontract, issued under NAICS code 332613 for spring manufacturing, falls under the jurisdiction of the Department of Defense through the Land Supply Chain office. The solicitation was posted on July 17, 2026, with a response deadline set for July 21, 2026, indicating a highly compressed procurement timeline designed to meet urgent operational needs. All submissions must demonstrate capability to meet the exacting standards required by the military, including material integrity, dimensional accuracy, and test validation, with failure to comply potentially disqualifying offers or leading to rejection of deliverables.
Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332721
New
DIBBS
Small Business Subcontracting Participation (Set-Aside Opportunity)Small businesses classified as SDVOSB, WOSB, or HUBZone are invited to engage in manufacturing, quality assurance, packaging, or logistics activities under a subcontracting opportunity tied to a Department of Defense contract. The prime contractor is required to meet specific subcontracting goals, creating a targeted pathway for eligible small businesses to participate in the supply chain supporting land-based defense operations. This opportunity is linked to NAICS Code 332721, which pertains to metal forging and stamping, indicating the work involves precision metal component production or related services. The solicitation opens on July 17, 2026, and responses are due by July 31, 2026, with all participation coordinated through the DLA’s DIBBS portal. While no specific location is listed, performance is expected to support the Land Supply Chain organization, and no set-aside designation is specified, meaning participation is driven by the prime contractor’s subcontracting obligations rather than a formal government set-aside.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 484220
New
DIBBS
Defense-Compliant Supply Chain & Logistics for FDT ProgramThe contract under the First Destination Transportation program requires comprehensive logistics and transportation support to deliver manufactured inserts to government-designated locations using transport arranged by the government. It is a subcontract governed under NAICS code 484220, indicating a focus on truck transportation services, and is managed by the Department of Defense through its Land Supply Chain organization. All activities must comply with Defense supply chain standards, ensuring secure, timely, and fully traceable movement of inserts from the point of manufacture to the final destination as directed by federal authorities. The contract is set to solicit bids through July 31, 2026, with the opportunity posted on the DIBBS platform, and performance will occur at locations determined by the government without specified geographic constraints.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Self-Locking Insert (Critical Application Item)The contract entails the precise manufacturing and supply of 681 self-locking inserts designated as Critical Application Items, requiring strict adherence to MIL-STD-1330E specifications and all associated technical data package requirements. These components are essential for high-reliability applications, demanding rigorous quality control, material traceability, and dimensional accuracy to meet military-grade performance standards. The work must be executed in full compliance with the technical documentation and quality assurance protocols defined by the Department of Defense. This is a subcontract opportunity under the NAICS code 332721, posted by the LAND SUPPLY CHAIN office of the Department of Defense, with a response deadline of July 31, 2026. The place of performance and specific location details are not provided, but the deliverables are intended for defense-related systems where failure is not an option. Interested parties must submit proposals before the deadline through the designated DIBBS portal to be considered for award.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333612
New
DIBBS
TRANSMISSION, MECHANThe contract pertains to the procurement of a single mechanical transmission unit with NSN 3010-01-693-0501, requiring delivery within 20 days of award. Technical and quality specifications are referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have Government identification removed prior to return. The solicitation number is SPE7L1-26-T-556P, issued on July 17, 2026, with responses due by July 22, 2026. The NAICS code is 333612, and the procuring agency is the Department of Defense’s Land Supply Chain under the Federal acquisition system. Performance is designated for Pascagoula, Mississippi, 39568, with Kristina Derry listed as the primary point of contact for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract pertains to the procurement of 10 units of a knob identified by NSN 5355-00-995-2022 under solicitation SPE7L1-26-T-799K, with a response deadline of July 22, 2026, and a required delivery within 20 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. The item must not contain any Class I ozone-depleting chemicals, and any proposed substitutes must be submitted for approval unless already authorized by the governing specifications. Export control restrictions apply to associated technical data under ITAR or EAR, requiring compliance with DFARS 252.225-7048; only contractors with approved US/Canada Joint Certification Program status, completed DOD training, and DLA authorization may handle or access the data. Additionally, the contractor must be certified at CMMC Level 2 by an accredited C3PAO. All government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. The contracting office is the Department of Defense’s Land Supply Chain under the Defense Logistics Agency, with Kristina Derry listed as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract is for one mounting plate with NSN 5340-01-618-0709 and part number 2BF205, procured under solicitation SPE7L1-26-T-797L for the Department of Defense through the Land Supply Chain. Delivery is required within 10 days of award, FOB origin, with no tolerance for quantity variance. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes applied. Packaging must comply with DLA’s procurement requirements, including palletization standards and use of specific containment and preservation methods. All shipments must be sent by the fastest traceable means, excluding parcel post, to the designated military address in El Paso, Texas. The delivery destination and mark-for address are identical, linked to a specific unit and building within the installation. Inspection and acceptance occur at the destination point. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision determined by the solicitation or award date. The required delivery date is July 1, 2026, and the contract includes government-only codes for tracking and logistics use.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details