Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GEL, TRANSMISSION, ULTRA

Active
SPE2DH-26-T-5553Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 250 mL squeeze bottles of transmission gel for ultrasound applications, packaged in cases of 12 bottles per pack for a total of two packs. The gel is an aqueous, viscous, tinted formulation designed to be non-sensitizing, bactericidal, non-irritating to skin, non-injurious to transducers, non-flammable, and non-corrosive, with a pH range of 6.50 to 6.95. It is intended exclusively for use in ultrasound procedures and must meet strict shelf-life requirements: a non-extendable shelf life of 60 months from date of manufacture, with no more than nine months allowed to elapse between manufacturing and government delivery. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must provide the source and part number being offered. The NSN is 6525-00-529-3346, with a purchase request number of 7017631791 and a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5553, posted on July 28, 2026, with responses due by August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance to be delivered to Fort Bliss, ZIP 79918-2527, and primary contact is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.

General Info

250 mL ultrasound transmission gel, 24 bottles total, 60-month shelf life, delivered to Fort Bliss in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5553.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEL,TRANSMISSION,ULTRASOUND
GEL, TRANSMISSION, ULTRASOUND,
SQUEEZE BOTTLE; TINTED VISCOUS
AQUEOUS GEL; NON-SENSITIZING BACTERICSTATIC
AND NON-IRRITATING TO THE SKIN; NON-INJURIOUS
TO TRANSDUCERS; NON-FLAMMABLE; NON-CORROSIVE;
PH RANGE OF 6.50 TO 6.95; USED FOR ULTRASOUND
250 ML, 12S
.
UNIT OF ISSUE PACKAGE (12 EA/PG)
.
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
NOT MORE THAN NINE MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/ . BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6525-00-529-3346 Quantity: 2 PG Purchase Request: 7017631791QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSEThe contract specifies the procurement of Prodigy Autocode Blood Glucose Test Strips, designed for use with all Prodigy pocket meters and featuring no-coding technology that eliminates manual calibration. Utilizing oxidase technology instead of GDH-PQQ, the strips offer safer and more accurate glucose measurements with automatic capillary action drawing the blood sample into the strip. These strips are approved for alternate site testing and are packaged in boxes of 50, with the unit of issue designated as BX. The product must comply with stringent medical packaging and labeling standards, including adherence to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Kings Bay, Georgia. The strips must have a non-extendable shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-278Q, with a response deadline of August 3, 2026, and a required delivery within 20 days after award. The NSN is 6550-01-680-9339, and bidders must provide the source and part number being supplied. The acquisition falls under NAICS code 339113 for medical device manufacturing and is managed by the Department of Defense, with technical and quality requirements incorporated from the DLA Master List. Covered defense information may apply, and all packaging must meet DLA requirements, including the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,This contract specifies the procurement of sterile adhesive skin closure strips measuring 3 inches by 1/4 inch, supplied in quantities of 200 units per package, with four boxes per package, totaling 3 packages. Each unit must be sealed in a commercial-grade container that ensures protection from damage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. The product must have a minimum shelf life of 24 months from the manufacturer’s date, with no more than three months elapsed between manufacturing and government delivery. Labeling requirements mandate clear markings for the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is designated as a Type I (Code M) shelf-life item under RS016, and its shelf life is non-extendable. All packaging, labeling, and marking must adhere to DLA’s packaging and medical marking standards, including the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-278D, with a response deadline of August 3, 2026, and a delivery requirement within 20 days of award. Bidders must identify the source and part number being offered, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The item is classified under NSN 6510-01-365-2077 and NAICS code 339113, and the procurement falls under federal acquisition protocols. The point of contact for inquiries is Anh Lam of the Department of Defense, Medical Supply Chain, and all documentation must reflect the most current standards specified by DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of 4 units of surgical adhesive skin closure strips, each unit consisting of 300 sterile strips measuring 0.50 inches by 4 inches, with porous backing options including polypropylene film or nonwoven nylon fabric, packaged in fifty envelopes per box. The product must have a minimum shelf life of 36 months, and no more than five months may have passed from the manufacturer’s production date to the delivery date to the government. The item is identified by NSN 6510-00-054-7254 and is subject to technical and quality requirements referenced in the DLA Master List, as well as DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-278Z, was posted on July 28, 2026, with a response deadline of August 3, 2026, and requires delivery within 48 days of award to the performance location in APO 96260-5479. The contracting agency is the Department of Defense’s Medical Supply Chain, with Tiffany Parker listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATORThe contract pertains to the procurement of a 1-liter test lung device specifically designed for use with IMPACT and ZOLL ventilator series 731 and 754M models, serving as a calibration tool within the broader ventilator calibration kit identified by NSN 6515-01-606-1476. The item is sold individually with a unit of issue of each and must comply with DLA packaging requirements for procurement. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, are fully incorporated and binding. Bidders are required to clearly state the source and part number being supplied and must adhere to the regulation mandating removal of government identification from non-accepted supplies. The product is listed under NSN 6515-01-608-7696 with a single unit requested under purchase request 7017631835 and must be delivered within 20 days of award. The solicitation number is SPE2DS-26-T-278E, issued on July 28, 2026, with responses due by August 3, 2026, under NAICS code 339113 for medical equipment manufacturing. The awarding agency is the Department of Defense, through the Medical Supply Chain MD Surg FSF, with delivery performance required at Travis Air Force Base, CA 94535-1825. Primary point of contact for inquiries is Aidan Martz, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST KIT, FECAL RAPIDThe test kit is a rapid fecal diagnostic tool designed for the qualitative detection of Entamoeba histolytica pathogens in human stool specimens, specifically for patients exhibiting symptoms of diarrhea or dysentery. It utilizes a membrane enzyme immunoassay in a single-use cassette format to identify the organism’s adherin, delivering results within 30 minutes without the need for specialized instrumentation. The kit has an analytical sensitivity of 0.2 ng/mL and is intended for use in clinical settings requiring swift diagnosis. Each package contains 25 tests and must be stored under refrigeration between 2 to 8 degrees Celsius; freezing is prohibited. The product has a non-extendable shelf life of 12 months from manufacture, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with Medical Marking Standard No. 1. Packaging must meet commercial standards ensuring protection from damage and safe transport via common carrier, with exterior containers suitable for shipping and export if required. The item is governed by DLA technical and quality requirements, packaging standards, and defense information protocols. The NSN is 6550-01-671-9115, with a purchase request quantity of one package, slated for delivery within 20 days to Fort Bliss, Texas, under solicitation SPE2DS-26-T-278B, issued by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUNDThe contract specifies the procurement of 50 kit units of a sealing compound compliant with SAE AMS 3281E Revision E, dated December 2010, classified as Type 1, Class B-1/2, with a specific gravity range of 1.20 to 1.35 and a gray color configuration requiring a separate catalyst. The product is designated for intermittent use up to 360°F and is intended for integral fuel tanks and fuel cell cavities. It is subject to a qualified products list requirement, mandating that the manufacturer be QPL-approved at the time of contract award. The item has a shelf life of nine months, extendable under RS001 requirements for TYPE 2 (CODE 3) items, and is marked with a special labeling code 33 indicating shelf life conditions. All packaging, marking, and shipping must adhere to MIL-STD-129R, including the inclusion of lot or batch numbers, and packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging standards. The compound is classified as a hazardous material, requiring submission of Safety Data Sheets and HCS-compliant labels per OSHA’s 29 C.F.R. 1910.1200, with supplier employees obligated to undergo training on these requirements. Delivery is due within five days, FOB destination, with no quantity variance allowed, and must be shipped to JBER, AK, following all hazardous materials transportation protocols outlined in DLA procedural notes. The NSN is 8030-01-479-6036, and the solicitation number is SPE8ES-26-T-2453, with a response deadline of August 3, 2026, and an original required delivery date of July 29, 2026.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SLEEVE, WRAP-AROUND,The sleeve is a wrap-around pneumatic compression device featuring three internal bladders designed to deliver circumferential, sequential, and gradient compression to promote deep vein clearance while preventing distal blood trapping. It is anatomically contoured with an adjustable closure system to ensure a customized fit for each patient and is intended for single-use only, arriving in a non-sterile, disposable state. The sleeve is thigh-length and sold in pairs, with five pairs per package. This item carries a fixed shelf life of 60 months under the DLA’s RS023 requirement and cannot be extended. It is subject to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced in the contract. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being offered. The NSN is 6515-01-565-1340, with a solicitation number of SPE2DS-26-T-276Q, issued on July 28, 2026, and responses are due by August 3, 2026. The purchase request is 7017631796 for a single package, with delivery required within 20 days after order. Performance is specified at Fort Bliss, Texas, and the contracting authority is the Department of Defense under the Medical Supply Chain MD Surg FSF, with Marcos Aliaga listed as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GAUZE, ABSORBENT, IODAbsorbent gauze impregnated with iodine, measuring 0.25 inches by 5 yards in rolled form, is specified for use in oral and nasal surgeries and as a drainage wick in the treatment of boils, abscesses, and fistulas. The product must be sterile and packaged in units of 12 each, with a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between manufacturing and delivery to the government. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container to prevent damage and shipped in appropriate exterior containers suitable for safe transport by common carriers at the lowest cost to the delivery point. The product must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and information on this standard is available through DLA Troop Support. The item is subject to technical and quality requirements listed in the DLA Master List, and packaging must adhere to DLA requirements as detailed in Section B of contract SPE2DS-26-T-279J. Government identification must be removed from non-accepted supplies. The item is identified by NSN 6510-01-003-7697, with a single unit to be delivered within five days of award, under a solicitation issued by the Department of Defense’s Medical Supply Chain Medical Surgical Fiscal Service, with performance directed to Suffolk, Virginia.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract calls for the procurement of 20 disposal containers specifically designed for the safe handling and disposal of hypodermic needles and syringes. Each container must measure between 6 to 7 inches in length and 1 to 2 inches in diameter, feature a securable cap, and include a lift-off cover to ensure safe containment and prevent accidental exposure. The product is identified by NSN 6530-01-645-6923 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The contract also notes that Covered Defense Information may apply, requiring compliance with relevant data protection protocols. Delivery is required within 20 days of award, with performance location specified as Fort Bliss, Texas, 79918-2527. The solicitation, identified as SPE2DH-26-T-5564, was posted on July 28, 2026, with responses due by August 4, 2026. It falls under NAICS code 339113 for medical and surgical instrument manufacturing and is a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH. Tina Vu is the primary point of contact, reachable via email and phone, with additional details available through the DIBBS portal. No set-aside classification is indicated, and the procurement is open to all qualified vendors meeting the specified technical, quality, and logistical requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICALThe contract specifies the procurement of sterile surgical sponges measuring 4 inches by 4 inches, packaged with two sponges per sealed envelope and twenty-five envelopes per box, totaling twelve hundred units per package. The product must maintain a shelf life of sixty months, with no more than nine months elapsed between the manufacturer’s date and the delivery date to the government. All labeling must comply with the latest revision of Medical Marking Standard No. 1, including clear identification of the manufacturer date, expiration or retest date, contract number, and lot number, and must replace all references to MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement document, ensuring each unit is sealed in a protective container and the entire shipment is packed in external containers suitable for safe transport by common carriers at the lowest possible rate to the delivery point at Travis AFB, California. The item is identified by NSN 6510-00-721-9808 and falls under NAICS code 339113, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Bidders must provide the source and part number being supplied, and all materials are subject to the Defense Information potentially applicable under RD003. The solicitation, issued under contract number SPE2DS-26-T-278G, has a response deadline of August 3, 2026, and requires delivery within twenty days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
FILE, PULP CANAL, DENThis contract specifies the procurement of 36 sets of ready-steel K-files for endodontic use, each set containing six pre-sterilized stainless steel instruments with square cross-sections, sized 45 to 80 and measuring 25 millimeters in length. The files feature non-cutting safe-ended batt tips, pre-inserted silicon stops for depth control, and color-coded ergonomic handles designed for secure grip and precise tactile feedback during root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, these instruments are engineered for durability, sharpness, and resistance to fracture, making them suitable for high-demand clinical environments. The product is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with all DLA packaging, quality, and technical requirements as defined in the DLA Master List. The item is identified by NSN 6520-01-718-2167 and is subject to covered defense information protocols. Bidders are required to clearly state the source and part number being supplied. The solicitation is issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and delivery expected within five days of award to Suffolk, Virginia, 23435-5000.
Dental Equipment and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 316210
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap for secure fit, featuring a 0.750 inch rubber synthetic sole, in black color, and designed to be non-slip. These items are packaged in units of 36 pairs per package and are identified by the NSN 6532-01-469-7522, with a single package quantity ordered under purchase request 7017637091. The solicitation, numbered SPE2DH-26-T-5566, was posted on July 28, 2026, with responses required by August 4, 2026, and delivery must be completed within 20 days after delivery order issuance. The item falls under NAICS code 316210 and is being procured by the Department of Defense through the Medical Supply Chain FSH office, with performance required at Fort Bliss, Texas, 79918-2527. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. Primary point of contact for inquiries is Tina Vu, reachable via phone or email provided.
Footwear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
LITTER, NONRIGID, POLELEThe contract specifies the procurement of three nonrigid, poleless litters designed for shoulder carry with quick-release straps, each capable of supporting a minimum weight capacity of 450 pounds. When unpacked, the litter measures 65 inches by 23 inches, and when packed, it must compress to dimensions of 10 inches by 7 inches by 1.5 inches thick, with a black finish. The item is classified under NSN 6530-01-600-7741 and is identified by manufacturer part number PHL-K-B from TACMED SOLUTIONS, LLC. It is regulated by the FDA as a Class I medical device under regulation 880.6900, requiring compliance with registration, listing, labeling, and GMP standards, even though a 510(k) premarket notification is not mandated. All units must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet DLA Packaging Requirements for Procurement (RP001) and MIL-STD-2073-1E standards. Each litter must be individually sealed in a commercial unit container and packed in suitable shipping containers that ensure safe, low-rate transport to the designated destination. Delivery is required within 84 days to APO AE 09227-0000, with the original delivery date set for July 28, 2026; no quantity variance is permitted. All items are subject to inspection and acceptance at the destination, and shipment must comply with DLA transport procedures including freight shipping to the specified facility in Kaiserslautern, Germany, with special attention to the medical marking standard and commercial packaging requirements for secure delivery.
Alumina Refining and Primary Aluminum Production

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
PAD, SPLINE SPLINTThe contract is for the procurement of disposable PAD, SPLINE SPLINT units designed for use on the forehead restraint strap to prevent contamination from body fluids. Each package contains ten pads and is associated with the SK-300 SPLINE SPLINT II TRANSPORT SYSTEM, identified by the NSN 6530-01-265-3583, with a unit of issue of one package per ten units. The product is governed by specific technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identifiers R and I numbers, and must comply with DLA packaging regulations and protocols for removing government identification from non-accepted supplies. Bidders are required to clearly state the source and part number being supplied, with the specified NSN for this item being 6530-01-507-9533, and the quantity requested is one package under purchase request 7017631805. Delivery must be completed within 20 days after order, and the solicitation is issued under contract number SPE2DH-26-T-5560, with responses due by August 4, 2026. The procurement falls under NAICS code 423450, is managed by the Department of Defense through the Medical Supply Chain FSH, and the performance location is Fort Stewart, Georgia. Primary point of contact is Tina Vu, reachable via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROSThe contract specifies the procurement of a synthetic resin mounting medium for microscopy, with a refractive index of 1.52 when dry and a 60 percent solution in toluene or xylene, sold in 1-ounce bottles. Each unit must have a shelf life of 12 months, and no more than two months may have passed between the date of manufacture and delivery to the government. Packaging must comply with commercial standards, using sealed unit containers to prevent damage and exterior shipping containers suitable for safe delivery via common carriers at the lowest rate, including export packaging when required. All items must be labeled with the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number, adhering to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The product is identified by NSN 6640-00-935-1485, with a unit of issue of one bottle equivalent to eight drops, and must be sourced with clear specification of the part number and manufacturer. Delivery is required within 20 days to Fort Bliss, Texas, under solicitation SPE2DH-26-T-5555, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and all applicable defense information safeguards in place.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MANIKIN, RESUSCITATIONThe contract specifies the procurement of a single set of an adult CPR training manikin designed for intermediate-level resuscitation instruction, featuring a medium skin tone and gender-neutral design to support inclusive training environments. The manikin is equipped with an integrated CPR rate monitoring system that uses LED indicators to visually guide correct compression rates between 100 and 120 per minute and emits an audible click when chest depressions reach the appropriate depth for effective compressions. It operates on two AA batteries and includes ten replacement face shield/lung bags and a durable nylon carry case for storage and transport. The unit is classified under the NSN 6910-01-708-0577 and must comply with all applicable DLA packaging and technical quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Delivery is required within 20 days of award, with performance occurring at Norfolk, Virginia, under the procurement reference 7017638336 and solicitation SPE2DH-26-T-5572, which was posted on July 28, 2026, with responses due by August 4, 2026. The acquisition is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap to secure the shoe in place, featuring a 0.750 inch sole, size small, and black color made from synthetic rubber with a non-slip surface. These items are packaged in units of 72 pairs per package and are identified by NSN 6532-01-469-7517. The order quantity is one package, with a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5567, posted on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory. The packaging must meet DLA packaging standards, and non-accepted supplies must have all government identification removed. The procurement is under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu at DLA.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details