This Government Contract opportunity from National Aeronautics And Space Administration was posted on July 27, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

General Information

Closed

80TECH23Q0033Federal

Submission Closed08/11/2023, 02:45:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

Pedestrian Countdown LED Module SupplierThis subcontract agreement involves the supply of 400 fully assembled pedestrian countdown LED modules for prime contractors working on City of Houston traffic equipment projects. The required hardware consists of new, first-quality 16 by 18 inch polycarbonate modules that feature international hand and walking symbols compliant with ICC standards. The supplier is responsible for ensuring that all materials meet strict quality and mechanical integrity standards to successfully pass city inspections. This procurement falls under NAICS code 334516 and is designated for infrastructure improvements within the City of Houston, Texas.

POSTED

DEADLINE

Traffic Signal Head SupplierThis subcontract agreement establishes a partnership for the supply of adjustable face vehicular traffic signal heads for prime contractors working on City of Greensboro Transportation Department projects. The supplier is responsible for manufacturing housings from 100% pure ultraviolet stabilized polycarbonate resin in Federal Yellow and assembling three and four section heads in stack configurations. Deliverables include fully assembled signal heads along with separate visors. To ensure quality and safety, the supplier must maintain approval on the NCDOT Qualified Products List and strictly adhere to MUTCD and ITE standards. This opportunity falls under NAICS code 334516, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

Medical Gravimetric Scales for Sterile CompoundingThis subcontract involves the provision of high-precision gravimetric scales for prime contractors working on pharmacy projects at the VA Loma Linda Healthcare System. The required hardware must be FDA cleared, conform to the Buy American Act, and support barcode-assisted compounding workflows. A critical technical requirement is the ability of the scales to transmit weight measurements directly to the BD Pyxis IV Prep application. Managed by the Department of Veterans Affairs Network Contract Office 22, the project is categorized under NAICS code 334516. The performance of the contract will take place in Loma Linda, California. Interested parties must adhere to the response deadline of October 29, 2026.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Request for Information - DNA Buccal Collection Kits

Solicitation # 20270753FDDU

The Federal Bureau of Investigation (FBI) is issuing a Sources Sought Notice and Request for Information (RFI) under solicitation number 20270753FDDU to identify potential sources capable of providing DNA Buccal Collection Kits. These kits are used by the Laboratory Division's Biometrics Analysis Section to process DNA databasing samples for upload to the National DNA Index System (NDIS). This is a market research effort for preliminary planning purposes and does not constitute a formal request for proposal or a commitment to award a contract. Interested small and large businesses must submit a capability statement by November 16, 2026, to Contracting Officer Bryan Lane. The required kits must meet international testing laboratory standards and ISO 9000 accreditation. Each kit must include a color-printed FD-936 form on 100# Tag Stock paper, nitrile gloves, a pre-inked fingerprint pad, ink-removal wipes, and a drying envelope with a desiccant packet. A critical requirement is the use of matching 8-character alphanumeric barcodes (format code 128 or 93) across the FD-936 form, the collection device, and the outer kit envelope. The outer envelope must be a non-white, tamper-evident, self-adhesive poly or Tyvek material with a tamper tape closure. Additionally, vendors must demonstrate the capacity to maintain a minimum inventory of 100,000 kits for immediate shipment.

POSTED

DEADLINE

NOI - Service and Maintenance of Lorrca Machine (R

Solicitation # 75N98027Q00022

The National Institutes of Health (NIH), Office of the Director, Office of Acquisitions, is issuing solicitation 75N98027Q00022 as a Notice of Intent to award a non-competitive, firm-fixed-price purchase order for a one-year full-service maintenance contract for a Lorrca ektacytometer. The service will be performed at the NHLBI Sickle Cell Branch in Bethesda, Maryland, and is intended for Mechatronics USA LLC, the original equipment manufacturer's sole U.S. sales and service provider. The scope of work includes one annual on-site preventive maintenance visit involving optical system cleaning, laser alignment, and calibration, as well as all corrective repairs, labor, travel, non-consumable parts, and software support to ensure the instrument's optimal performance for Sickle Cell Disease research. The contract is conducted under FAR 12.603 and is not expected to exceed the simplified acquisition threshold. Key deliverables include a Quality Control certificate and field service report upon completion of maintenance. Invoicing must be processed monthly through the Invoice Processing Platform (IPP) using a three-way match. The associated NAICS code is 334516, and the requirement is not set aside for small business. Proposals must be submitted electronically to Nicholas Capobianco by November 5, 2026, and must include the offeror's Unique Entity Identifier, Taxpayer Identification Number, and business size certification.

National Institutes Of Health Olao

POSTED

DEADLINE

Science Lab Instrumentation and Equipment SupplierThis subcontract opportunity is for a Science Lab Instrumentation and Equipment Supplier to support prime contractors on science equipment projects for the Harlingen Consolidated Independent School District in Texas. The selected supplier will be responsible for providing essential laboratory tools, including microscopes, digital scales, pH meters, and centrifuges. Beyond simple procurement, the scope of work includes the delivery, basic setup, and calibration of these electronic and optical measurement instruments to ensure they are fully operational upon installation. All electrical equipment provided under this contract must be UL listed to meet safety standards. Interested parties should note that the response deadline is November 5, 2026, with the solicitation having been posted on October 21, 2026. The project falls under NAICS code 334516, focusing on the specialized supply and installation of scientific instrumentation for educational facilities.

POSTED

DEADLINE

X-Ray Tube for XRF Spectrometer Equipment

Solicitation # 601440000053804

The Texas Department of Transportation is seeking an Invitation for Bid under solicitation number 601440000053804 to procure and install an X-Ray tube for a Rigaku Supermini X-Ray Fluorescence Spectrometer used by the Materials and Tests Division. The required component is a Rigaku Supermini 200 WDXRF Spectrometer X-Ray tube, specifically an end-window palladium type with a 200-watt target power rating, a maximum operating voltage of 50 kV, and a maximum operating current of 4.0 mA. All electrical items must comply with OSHA standards and bear appropriate UL, FMRRC, or NEMA listings. The contract will be awarded based on the best value, primarily considering the lowest price and the respondent's technical ability to meet the specified requirements. Responses are due by November 3, 2026, at 9:00 PM. Bidders must provide a signed response, their Employer Identification Number, and a detailed product description including the manufacturer and brand. Delivery must be F.O.B. destination freight prepaid and allowed to a designated TxDOT location, with a default delivery window of 14 calendar days if no specific lead time is provided. Payment will be issued via warrant or direct deposit within 30 calendar days of receiving a correct invoice. The procurement process includes strict compliance requirements regarding eligibility, anti-terrorism certifications, and the prohibition of collusion or gratuities.

Texas Department of Transportation

POSTED

DEADLINE

Entanglement Technologies Parts and ConsumablesThis subcontract, issued by the Government of Ontario's Ministry of Environment, Conservation and Parks, involves the supply of specialized parts and consumables for Entanglement Technologies equipment. The selected provider will support prime contractors engaged in environmental monitoring projects by delivering essential components that must strictly adhere to the minimum mandatory requirement specifications outlined in the RFB deliverables. The opportunity was posted on October 20, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 334516, the contract focuses on the procurement and delivery of technical hardware and consumables necessary for the operational success of the specified monitoring systems.

Environment, Conservation and Parks

POSTED

DEADLINE

Pollution Analytical Equipment Parts and ConsumablesThis subcontract, issued by the Government of Ontario's Ministry of Environment, Conservation and Parks, involves the supply of parts and consumables for pollution analytical equipment. The selected provider will support prime contractors on environmental monitoring projects by delivering essential technical components and sensors used in the analysis of pollutants. To be eligible, the provider must adhere to the minimum mandatory requirement specifications outlined in Part 3 of the RFB deliverables. The contract is categorized under NAICS code 334516, with a response deadline set for November 4, 2026.

Environment, Conservation and Parks

POSTED

DEADLINE

Solicitation # 582-27-20191

The Texas Commission on Environmental Quality (TCEQ) is soliciting bids under solicitation number 582-27-20191 for the procurement of 60 packages of replacement membrane filters for use at agency-owned air monitoring stations. These filters are essential for collecting air monitoring data required by 40 CFR Part 58 for the US Environmental Protection Agency. The required filters must be hydrophobic Polytetrafluoroethylene (PTFE), chemically inert, and meet specific technical standards, including a 170 micron thickness, 5.0 micron pore size, 47 mm diameter, and 60 percent porosity, with a plain white smooth surface and an air flow rate of 9 liters per min centimeters squared. The reference model is Expo tech USA, Inc # 1183403 or an equivalent. Bids are due by November 04, 2026, at 2:00 PM CST and can be submitted via email to TCEQebid@tceq.texas.gov or physically time-stamped at the TCEQ. Awards will be based on the low line item bid, low total of line items, or a combination that serves the best interest of the state. Delivery is to be made to Austin, Texas, with a default delivery window of 14 calendar days if no other timeline is specified. The contract includes various Texas Government Code compliance requirements, including certifications against boycotting Israel or energy companies, prohibitions on business with foreign terrorist organizations, and adherence to COVID-19 vaccine passport prohibitions. Vendors must provide a Texas Identification Number System (TINS) number and an Employer Identification Number (EIN) to receive payment.

Texas Commission on Environmental Quality

POSTED

DEADLINE

Rain Gauge and Data Logger Equipment SupplyThis subcontract focuses on the procurement and delivery of rain gauges and compatible data logging equipment for the Alabama Water Investigations agency. The selected provider is responsible for sourcing and delivering precipitation monitoring hardware that adheres strictly to agency specifications and ensures all equipment is fully functional upon delivery. To qualify, the supplier must provide manufacturer reseller authorization and guarantee that all hardware meets the standards set by the Alabama Department of Finance Administrative Code. The contract allows for delivery either directly to the agency or to designated prime contractors, with all operations falling under NAICS code 334516.

POSTED

DEADLINE

Oil Analysis Autosampler SupplierThis subcontract opportunity, issued by the Department of Defense for W6QM Micc-Ft Drum, seeks a supplier to provide one fully functional compatible autosampler for oil analysis projects. The required system must feature mixing and stirring capabilities, sample induction heads, and a capacity for four 96-position racks to accommodate up to 384 samples. To ensure operational compatibility, the unit must integrate with ASXpress systems for ICP-OES induction according to ASTM D-5185 standards and maintain physical dimensions no larger than 20 by 24 by 24 inches. This procurement is designated as a Total Small Business Set Aside under NAICS code 334516. Interested parties must submit their responses by the deadline of November 14, 2026. The project is associated with oil analysis operations and will be performed in the 85365 zip code area.

W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 24 days

General Info

Agency

National Aeronautics And Space Administration → NASA It Procurement Office

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Huntsville, AL, 35812, USA

Set-Aside

NONE

Documents

SOW - Oxford Instruments EBSD and EDS Detectors

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJul 27

special-notice

Response DeadlineAug 11

Deadline has passed

Submission Closed

08/11/2023, 02:45:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA It Procurement Office

Contacts1 person available

OfficeGreenbelt, MD, 20771, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA It Procurement Office

Office AddressGreenbelt, MD, 20771, USA

Contacts

Dennis A. Ross

contact@example.gov

Full Description

STATEMENT OF WORK 1. Objective/Requirements Marshall Space Flight Center (MSFC) requires the purchase of Oxford Instruments high-resolution, high-speed electron backscatter diffraction (EBSD) detector and an Oxford Instruments live x-ray imaging energy dispersive spectroscopy detector (EDS) for faster diagnostic and explorative analysis. Requirements also include a computer, the required software to operate and process the data generated by these detectors, as well as installation and training. 2. Characteristics, Scope, and Specs Quantity Part # Description 1 51N1141 AZtecLive Standard Microanalysis System with Ultim Max 170 large area Analytical Silicon Drift Detector This comprehensive energy-dispersive X-ray Microanalysis system Includes the new 'AZtecLive' step, which enables the quick and comprehensive investigation of a sample with real-time chemical feedback plus all the tools required to perform qualitative and quantitative analysis, image capture image-centric analysis, and X-ray spectral mapping and line scanning. Software includes: - Live X-ray Maps - Live Trace - Tru-Q analysis engine - Point and ID - AutoID - Standardless quantitative analysis - Spectral imaging - AutoLayer element and phase visualization -AZtecTruMap - Microsoft Office for report generation - Additional license for off-line processing Hardware includes: - Ultim Max 170 - 170mm2 sensor size. - Resolution guaranteed on Mn K - 127eV at 130,000 cps. - Includes SATW window for detection of elements from Beryllium - X4 Pulse Processor and Imaging Electronics - An Ethernet-based Module that provides X, Y scan generation and X-ray acquisition and detection - Windows 10 PC - 27-inch Widescreen LCD display 1 51N2052 Integrated AZtecHKL system Expert with Symmetry S3 Integrated AZtecHKL is a powerful platform for EBSD that can be combined with AZtecEnergy for both independent and simultaneous EDS and EBSD analysis. Simultaneous data collection can be used in Phase Identification where the X-ray data is used to identify candidate phases and the EBSD data used to distinguish the phases. EBSD and EDS data can also be collected simultaneously as maps, enabling a true characterization of the sample. Includes all the tools necessary to collect and solve EBSD patterns including: - Autocal, Auto Exposure, Auto Background, Detector Control, Calibration Refinement Tools, Tru-I Indexing and Solver engines, ICSD database, Large Area Mapping, MapQueue, Image Registration, AutoLock Drift Correction, TruPhase, Color FSD Imaging, Psuedosymmetry Correction, CIF Import, HKL Steel, AZtecCrystal Advanced, AZtecCrystal MapSweeper, Crystal Definitions, Advanced Textures, Materials Properties, Calssify Tool, Parent Grain Analysis, Dislocation Analysis Hardware: - Symmetry EBSD detector - Forward scatter detector with 5 diodes - EBSD Control Box and Hand Set - Symmetry Windows 10 PC - 27 inch Widescreen LCD display 1 51A1019 AZtec Magnetic Field Correction (for SEMs with semi-in or immersion lens). 1 51A4001 Geological Phase Database - Am. Min. 1 51A4002 NIST Structural Database (NSD) 1 INSEGR AZtecLive installation and software familiarization. Includes one credit towards tuition to EDS training school at an Oxford Instruments America, Inc. training facility. The credit must be used within 12 months of installation. For additional tuition credits, see part number Z006. WARRANTY: All systems and equipment sold by Oxford Instruments America, Inc. is supplied with a complete 12-month part and labor warranty. 1 INSHKL HKL EBSD installation and software familiarization. Includes one credit towards tuition to EBSD training school at an Oxford Instruments America, Inc. training facility. The credit must be used within 12 months of installation. For additional tuition credits, see part number Z006. WARRANTY: All systems and equipment sold by Oxford Instruments America, Inc. is supplied with a complete 12-month part and labor warranty. 1 Z003/2DA On-site Application Training - Two Days On-site applications training with an Oxford Instruments, Microanalysis applications specialist. The on-site training cost is applicable for up to 6 users per session. Expenses are included. 3. Place of Performance Address for the shipping facility: 4631 Saturn Rd Bldg 4631, Huntsville, AL 35812 The final Place of Delivery is: NASA Marshall Space Flight Center Building 4602 room 1128 4. Period of Performance 14-16 Weeks from the effective order date of TBD.