Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

GENERATOR CARTRIDGE AS

Active
SPE2DH-26-T-5211Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The generator cartridge assembly with electrode is a critical component for the Aquatest 8 and Aquatest 10 moisture analyzers, identified by NSN 6630-01-253-3831 and part number 6630-01-415-1588, with a single unit required under purchase request 7017496598. The item must be supplied as a complete unit, properly packaged in a sealed container that protects against damage or breakage, and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest possible rate to the specified delivery point in FPO, ZIP 96672, within 20 days of award. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders are required to clearly state the source and part number being offered. The solicitation, issued under contract number SPE2DH-26-T-5211, is open for responses until July 22, 2026, and falls under NAICS code 339113 with the Department of Defense through the Medical Supply Chain FSH as the procuring agency. Covered defense information may apply, and bidders must ensure compliance with all applicable medical marking and packaging requirements.

General Info

Generator cartridge for Aquatest analyzers, NSN 6630-01-253-3831, one unit, ship to FPO ZIP 96672 in 20 days, compliant packaging.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

UNIT 100222 BOX 1, FPO, AP, 96672, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5211.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS

Full Description

Show more
GENERATOR CARTRIDGE ASSEMBLY
GENERATOR CARTRIDGE ASSEMBLY WITH ELECTRODE
COMPONENT OF AQUATEST 8 AND AQUATEST 10
MOISTURE ANALYZER, NSN 6630-01-253-3831
.
UNIT OF ISSUE = EACH (EA)
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-415-1588 Quantity: 1 EA Purchase Request: 7017496598QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 339113
New
DIBBS
LENS, OPHTHALMIC, COMPOUThe contract specifies the procurement of ophthalmic compound lenses under NSN 6540-01-645-8120, with a quantity of six units to be delivered within 20 days to Fort Hood, Texas, under FOB destination terms. The item is classified as a FDA-regulated Class III medical device, requiring compliance with registration, listing, labeling, and Good Manufacturing Practices even if a 510(k) is not mandated. All packaging must conform to commercial standards as outlined in the procurement document, with each unit sealed in protective containers and shipped in commercial exterior containers suitable for safe carrier transport at the lowest cost. Marking requirements strictly follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be applied in accordance with DLA guidelines accessible online. The product must be shipped via traceable means, excluding parcel post, and requires palletization per DLA packaging requirements. The contracting officer must submit an EBS referral for FDA confirmation, including bidder and manufacturer details. The delivery address, ship-to, and mark-for locations are identical and tied to a specific military installation code, with special handling instructions and a required delivery date of July 16, 2026. The contract uses the DoD unit of issue and references the DLA Master List of Technical and Quality Requirements for compliance with all technical and regulatory conditions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
LIGHT, DIAGNOSTIC-EXAMIThe contract is for a single diagnostic light unit, identified by NSN 6530-00-480-8286, designed for medical examination purposes to detect foreign objects, abrasions, lacerations, and ulcerations of the eye. The handheld device features a rectangular housing measuring approximately 7 inches by 5.5 inches by 2.5 inches, containing sockets, ballast, and wiring for four lamps—two cool white fluorescent and two ultraviolet—along with on-off switches, a 3-power magnifying lens measuring 4 by 2 inches, and a 6-inch handle. It operates on 115 volts AC at 50/60 Hz and includes a 6-foot, three-conductor power cord with a 16-watt Burton-type three-prong plug. The unit must be packaged commercially as specified, sealed in a container capable of preventing damage or breakage, and shipped in exterior containers suitable for safe delivery via common carrier at the lowest rate to the designated delivery point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement is governed by DLA’s packaging and technical requirements, with compliance to the DLA Master List of Technical and Quality Requirements referenced under RP001 and RA001, and must conform to the applicable revision in effect on the solicitation or award date. The solicitation number is SPE2DS-26-T-236T, issued on July 15, 2026, with responses due by July 21, 2026, under NAICS code 339113. Delivery is required within 20 days of award to an FPO address with ZIP 96666. The contracting office is the Department of Defense, Medical Supply Chain MD Surg FSF, with primary point of contact Olusola Emmanuel reachable via email and phone. Government identification must be removed from non-accepted supplies per RQ011, and all documentation must align with DLA’s current procurement standards for simplified or large acquisitions as applicable.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAY, COUNTING, TABLET AThe contract specifies the procurement of one counting tray designed for tablets and capsules, identified by NSN 6530-01-168-8096 and part number 23087, with a unit of issue of each (EA). The tray must include a mechanical mechanism to separate counted doses and allow excess doses to be poured back into a vial, must be compatible with medication vials, and must come with a spatula. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packing and shipping containers must be commercially suitable, sealed, and capable of protecting contents from damage during transit. The equipment must be packed and palletized per DLA Packaging Requirements (RP001) and ASTM D3951, with all labeling and marking strictly following DLA’s Medical Marking Standard. Delivery is FOB destination within 20 days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the delivery point. Freight must be shipped by the fastest traceable means—parcel post is prohibited—and the delivery address is specified for the USNS APALACHICOLA at the MSC Warehouse in Norfolk, Virginia. The contract is issued under solicitation SPE2DH-26-T-5210 with a response deadline of July 22, 2026, and a required delivery date of July 17, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details