Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Global Hawk Skyrange Program Demonstration Engineering, Manufacturing, and Technical Support

Active
80AFRC26SS011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Armstrong Flight Research Center is seeking engineering, manufacturing, and technical support services for the Global Hawk Skyrange Program Demonstration, focusing on the operation, maintenance, and necessary modifications to Global Hawk aircraft, ground control stations, ground support equipment, and associated spares and repairs. The contract will be awarded as a sole source to Northrop Grumman Systems Corporation under FAR 6.103-1, as the agency has determined that only this source has the unique capability to fulfill the requirements, and no other supplies or services would satisfy the government’s needs. The government explicitly does not intend to treat this as a commercial product or service acquisition under FAR Part 12. Interested parties may submit their qualifications electronically to Roxana Romero at roxana.l.romero@nasa.gov no later than August 17, 2026, at 12:00 PM PST, to assist the government in evaluating whether competitive sourcing is warranted; however, the final decision on competitiveness rests solely with the government. The solicitation number is 80AFRC26SS011, with a NAICS code of 488190, and the primary place of performance is Edwards Air Force Base in California. NASA Clause 1852.215-84, Ombudsman, applies, and contact information for the Center Ombudsman is available through the official NASA procurement website.

General Info

NASA awards sole-source contract to Northrop Grumman for Global Hawk support at Edwards AFB.

Agency

National Aeronautics And Space Administration → NASA Armstrong Flight Research CntrView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr
Contacts1 person available
OfficeEDWARDS, CA, 93523, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr
View Agency Profile
Office AddressEDWARDS, CA, 93523, USA
Contacts
Roxana Romero
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

NASA/Armstrong Flight Research Center (AFRC) has a requirement for Global Hawk Skyrange Program Demonstration Engineering, Manufacturing, and Technical Support. The contractor shall perform engineering, manufacturing, and technical support services in support of the operation and maintenance and required modifications to the Global Hawk air vehicles, Ground Control Stations, Ground Support Equipment, and spares/repairs.


NASA/AFRC intends to issue a sole source contract to acquire the services from  Northrop Grumman Systems Corporation (NGSC) under the authority of FAR FAR 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. 


The Government does not intend to acquire a commercial product or commercial service using FAR Part 12.   


Interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to Roxana Romero at roxana.l.romero@nasa.gov not later than 12:00PM PST on August 17, 2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether to conduct this acquisition on a competitive basis. A decision by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government.


NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at : https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf


Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
TUBE ASSEMBLY
Solicitation # SPEFA5-26-T-0947
The contract is for the procurement of two tube assemblies, identified by part number 901-060-380-101 and NSN 1560-LL-CFQ-B165, manufactured to drawing 901-060-380 with cage code 97499. Performance is required within 95 days after order, with a firm delivery deadline of December 24, 2026, and delivery must be made FOB destination to the Fleet Readiness Center DLA at Cherry Point, North Carolina. The contract is awarded under solicitation SPEFA5-26-T-0947, issued by the Defense Logistics Agency Fleet Readiness Center, and follows streamlined acquisition procedures, with pricing set at $1.00 per unit for a total value of $2.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling and MIL-STD-130N(1) for identification marking, including Data Matrix barcode requirements. Palletization adheres to DLA Packaging Requirements RP001, while preservation follows ASTM D3951 unless overridden by higher-priority DLA standards. Inspection and acceptance occur at the destination, with sampling conducted using MIL-STD-1916 or a zero-defect alternative plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses including those for cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, and electronic invoicing via WAWF. Offerors must hold a valid UEI and CAGE code, and are required to represent their small business status where applicable, with no set-aside specified. The contract type is designated to be determined upon award, referencing Alternate I of FAR 52.216-1, and delivery quantities are fixed with no variance permitted. Hazardous and radioactive materials are subject to specific notification and labeling protocols, and the contractor must comply with all federal regulations governing material safety and data handling.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
Federal
C-12W Contractor Logistics Support Follow-on
Solicitation # N00019-26-RFPREQ-APM207-0738
The Naval Air Systems Command (NAVAIR) is preparing to solicit a follow-on Contractor Logistics Support (CLS) contract for the U.S. Marine Corps C-12W aircraft fleet, succeeding the current task order under the CMMARS contract with Vertex Aerospace LLC, which expires October 31, 2027. The requirement encompasses comprehensive maintenance, repair, supply chain management, and field support services across multiple U.S. and international locations, including sites in Japan, Germany, the Middle East, and various U.S. military bases. Offerors must demonstrate access to FAA-certified King Air 350 CER repair stations with the capability to manage government-owned assets, including APUs, landing gear, and peculiar and common support equipment, while adhering to best commercial practices. The acquisition will be structured as a competitive, indefinite-delivery/indefinite-quantity (IDIQ) contract with performance slated to begin in the fourth quarter of FY27. Industry engagement is a critical component of the planning phase, with an industry day scheduled for August 11, 2026, in California, Maryland, where attendees must register by August 6, 2026, to participate and request one-on-one meetings. A Draft Statement of Work will be distributed by August 4, 2026, and a Draft RFP is expected in October 2026, followed by a final RFP targeted for February 2027. Interested parties must submit a three-page capabilities statement addressing past performance, subcontractor management, technical expertise, small business status in accordance with NAICS code 488190, compliance with FAR 52.219-14 for work performance thresholds, access to commercial parts inventories, experience with configuration changes, ITAR/export compliance, and transition readiness within 90 days. Responses are due no later than 2:00 p.m. EST on August 6, 2026, to the designated point of contact, and all submissions must include company details and points of contact. The government emphasizes that this is purely an information-gathering effort with no obligation to procure and no funds available for response preparation.
Naval Air Systems Command

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
Federal
F-16 Wing Pylon Rib Repair
Solicitation # FA823226QPYL
The U.S. Air Force is conducting market research to identify capable sources for repairing a corrosion issue on the F-16 Wing Pylon Rib attach fitting for F-16 Block 30, 32, 40, 42, 50, and 52 aircraft. This effort is focused on developing a repair solution that can be implemented within 12 months, performed in the field while the wing remains installed on the aircraft, and conducted by end users or Contract Field Teams and Depot Field Teams. The repair must fully resolve existing corrosion in designated areas A, B, C, and D as shown on the engineering drawing 16W112 and prevent recurrence for the remainder of the aircraft’s service life. The Government is evaluating potential vendors for their technical capability, cost structure, technology maturity, and past performance delivering similar repair services to both government and commercial customers over the past three years. Responses must include details on small business status—such as 8(a), Service-Disabled Veteran-Owned, HUBZone, or Women-Owned—and any teaming arrangements, clearly distinguishing the roles of the prime contractor from subcontractors. All interested parties must submit a signed DD Form 2345 to the program manager prior to receiving the limited distribution engineering drawings. The certification process requires coordination with the Joint Certification Office and has variable turnaround times depending on submission method, so early initiation is strongly encouraged. Once the DD Form 2345 is approved, the drawing package will be provided via secured electronic transfer with login credentials. Submissions must be received by August 14, 2026, at 5:00 p.m. Eastern Time, through the SAM.gov portal. The solicitation number is FA823226QPYL, and the NAICS code for this effort is 488190 with a size standard of $40 million. The Government aims to assess whether a competitive acquisition or a total Small Business Set-Aside is feasible based on responses received, with performance expected to occur in Richland, South Carolina, and the lead office located at Hill Air Force Base, Utah. Technical inquiries should be directed to Ryan Lambert or Yvonda Benson.
FA8232 Aflcmc Wwmk

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 488190
New
Federal
USCG Air Station Kodiak Helicopter Maintenance Services
Solicitation # 20270PR260001476
The U.S. Coast Guard Air Station Kodiak in Kodiak, Alaska, is soliciting quotes for Helicopter Maintenance Services under solicitation number 20270PR260001476, issued as a combined synopsis and solicitation in accordance with FAR Part 12. The acquisition, classified under NAICS code 488190, is not set aside for small businesses and will be awarded using an SF 1449 form. The performance work statement outlines the required services, and all contractual and technical inquiries must be submitted in writing via email to Robbin Kessler by July 24, 2026, using the provided Excel template; telephone inquiries are not accepted. Responses to questions will be published as amendments on SAM.gov. A recommended but not mandatory site visit is scheduled for July 22, 2026, at the Air Station Kodiak; attendees must register their full names by July 15, 2026, and foreign nationals are prohibited from participating. Quotes are due by August 14, 2026, at 1:00 p.m. Alaska time, and must include two points of contact with name, phone number, and email. Quotes must remain valid for 30 days unless otherwise specified, and late submissions may be accepted at the government’s discretion.
Base KODIAK(00045)

POSTED

about 21 hours ago

DEADLINE

in 18 days
View Details
NAICS: 488190
New
Federal
S201--Building Drone Cleaning
Solicitation # 36C26226Q1150
The U.S. Department of Veterans Affairs, through the VA Loma Linda Health Care System, is conducting a sources sought announcement to identify qualified small businesses capable of providing drone-based exterior building cleaning services at the Loma Linda Medical Center in California. This announcement is purely for market research and does not constitute a solicitation, request for proposals, or any obligation to award a contract. The government is seeking information from Service-Disabled Veteran Owned Small Businesses, Veteran-Owned Small Businesses, 8(a), HubZone, Women-Owned, and other small businesses with demonstrated expertise in utilizing tethered drone systems for soft wash cleaning of building facades, windows, masonry, and hard surfaces up to 175 feet in height. Respondents must provide detailed documentation including company information, Unique Entity ID, CAGE code, tax ID, small business certification status, and a capability statement not exceeding five pages that directly addresses technical qualifications, regulatory compliance, and operational capability. To be considered capable, firms must hold an active FAA Part 107 Remote Pilot Certification and, if operating drones exceeding 55 pounds, must possess an FAA Section 44807 Heavy Drone Exemption. All equipment must be NDAA-compliant with verified manufacturer and origin details, and vendors must carry UAS aviation liability insurance of at least $2 million. Vendors must also hold an OSHA 30-hour certificate and a D38 Sand and Water Blasting license, and must be registered in SAM.gov. Responses must include past performance examples with contract value, building height, and points of contact from similar projects completed within the last three years. Strict limitations on subcontracting apply: the prime contractor must perform at least 50% of the contract cost with its own personnel or similarly situated certified SDVOSB/VOSB entities, and no pass-through arrangements are permitted. Failure to submit a signed VAAR 852.219-75 Certificate of Compliance will render a response ineligible. The government will not reimburse any costs incurred in responding, and submissions must be received by July 20, 2026, at 4:00 p.m. EST, addressed to Stephanie Naron, Contract Specialist. All responses will inform future acquisition planning under the Veterans First Contracting Program, which prioritizes awards to verified SDVOSBs when the Rule of Two is met.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-26-T-0968
This contract pertains to the procurement of two units of a critical application item identified as SIKORSKY AIRCRAFT CORPORATION P/N 65207-10037-102 with NSN 1560-LL-NC1-4288, designated as SKIN. The item must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical attributes requiring verification level VII or an AQL of 0.1, major attributes IV or 1.0, and minor II or 4.0; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated. The item has no shelf life requirement and must be physically marked per RQ017. Packaging must adhere to MIL-STD-129 for labeling and marking, and palletization must follow DLA Packaging Requirements, with all units shipped FOB destination within 83 days of contract award. Delivery is required to the Fleet Readiness Center DLA at Cherry Point, North Carolina, with no tolerance for quantity variance. The contract specifies a unit price of $2.00 per unit, totaling $4.00 for the two units, and is issued under solicitation SPEFA5-26-T-0968 with a response deadline of August 7, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-26-T-0969
This contract is for the procurement of four units of a critical application item identified as P/N 65207-10037-102 with NSN 1560-LL-NC1-4288, designated as SKIN, under solicitation SPEFA5-26-T-0969 issued by the DLA Fleet Readiness Center Southwest. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951 for packaging. Sampling is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. The item has no shelf life restriction and must be physically marked per RQ017, with all packaging and labeling strictly adhering to MIL-STD-129 and palletization per DLA Packaging Requirements. Delivery is FOB destination in 83 days, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The unit of issue is each, with a total price of $4.00 per unit. The required delivery date is December 8, 2026, and items must be shipped to the freight address at Naval Base Coronado, with parcel post delivery to a separate PO Box in San Diego, California. The contract is for federal procurement under NAICS code 488190 and is managed by Larry Kemp of the Department of Defense.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
DIAPHRAGM, STOP
Solicitation # SPEFA5-26-T-0970
The contract specifies the procurement of a DIAPHRAGM, STOP with part number HP1060114-1 and NSN 1650-LN-002-9316, quantity of two units, to be delivered within 38 days to Cherry Point, North Carolina. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The item is designated as a critical application item with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must comply with ASTM D3951, but must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Identification of the item must conform to MIL-STD-130N dated November 16, 2012. The unit of issue is each (EA), priced at $2.00 per unit for a total of $4.00. The solicitation number is SPEFA5-26-T-0970 with a response deadline of August 7, 2026, and delivery is required no later than October 19, 2026. The point of contact for inquiries is Larry Kemp, and shipping is directed to the Fleet Readiness Center DLA at Cherry Point.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
DOUBLER
Solicitation # SPEFA5-26-T-0967
This contract, issued by the DLA Fleet Readiness Center under solicitation SPEFA5-26-T-0967, pertains to the procurement of five units of a component identified by NSN 1560-LL-NCB-0619 and part number 212-060-802-103 from Bell Textron Inc, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 27 days of contract award, FOB destination, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the material has no shelf life constraint. The supplier must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA’s specific packaging guidelines. Sampling and inspection protocols require zero non-conformances unless otherwise specified, using MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The unit of issue is EA, and all packaging must reflect the specified QUP. Delivery is to be made to the designated freight address in Cherry Point, North Carolina, with parcel post deliveries routed to the corresponding PSC address. The required delivery date is October 2, 2026, and the solicitation was posted on July 30, 2026, with responses due by August 7, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
INSULATOR
Solicitation # SPEFA3-26-T-0331
The contract pertains to the procurement of an insulator with part number 31-301-3805-2 and NSN 1680-LN-003-3448, totaling 18 units at a unit price of $18.00, for a total value of $324.00. Delivery is required FOB destination within 81 days from the contract award, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all items must be packaged in compliance with ASTM D3951, while marking and labeling adhere strictly to MIL-STD-129. Packaging and palletization must meet DLA’s specific requirements outlined in RP001, and any technical or quality specifications referenced via R or I numbers take precedence over general standards like ASTM. The insulator has no shelf life requirement, and Item Unique Identification is not mandated per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) applying. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero nonconformances required unless otherwise stated, and attributes are to be classified per specified verification levels or AQLs. The delivery address is the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight routed through DLA Distribution Jacksonville. The contract was issued under solicitation SPEFA3-26-T-0331 by the DLA Fleet Readiness Center Southeast, a Department of Defense agency, with a required delivery date of July 30, 2026. The solicitation was posted on July 30, 2026, and responses were due by August 7, 2026. The NAICS code 488190 indicates the nature of the procurement relates to other support activities for air transportation. The primary point of contact is James Green, reachable via email and phone for inquiries. The unit of issue is each (EA), and the contract references the DLA Master List of Technical and Quality Requirements as the authoritative source for all technical and quality conditions. The buyer is expected to confirm ANSI X12 unit of issue alignment via the provided DLA URL. No set-aside classification applies, and all provisions are to be interpreted and executed in accordance with DLA’s standardized procurement protocols and compliance frameworks.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA3-26-T-0332
This contract under solicitation SPEFA3-26-T-0332 issued by DLA Fleet Readiness Center Southwest requires the delivery of one unit of part number 1560-LN-003-1483, identified as a critical application item for The Boeing Company with P/N 74A350841-2044. The item has no shelf life requirement and must be delivered FOB destination within 84 days of contract award, with zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified; attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. Packaging must comply with ASTM D3951 but is subordinate to DLA requirements, and all items must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each (EA). Inspection and acceptance occur at destination. The sole delivered quantity is one unit at a total price of one dollar. The delivery address for freight is Naval Base Coronado, Building 660, Bay 3, and the parcel post address is PO Box 357058, Naval Air Station North Island. The original required delivery date is October 30, 2026.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
SPAR
Solicitation # SPEFA5-26-T-0966
This contract, issued by the DLA Fleet Readiness Center under solicitation SPEFA5-26-T-0966, pertains to the procurement of four units of part number 1560-LL-NC1-3865, identified as a critical application item for Sikorsky Aircraft Corporation, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 98 days to the destination FOB, with no variance allowed in quantity, and inspection and acceptance both occur at the delivery point. The item has no shelf life requirement, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified using specified verification levels or AQLs. Packaging must comply with ASTM D3951 as guided by MIL-STD-129 for marking and labeling, and palletization must adhere to DLA packaging requirements. The unit of issue is each, with quantity per unit pack set to one, and all packaging must align with the contracted specifications. Delivery coordinates are designated for both parcel post and freight shipping to Cherry Point, North Carolina, with the original required delivery date set for January 16, 2027.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr

Same awarding agency

NAICS: 236220
Federal
Small Business Subcontracting ParticipationThis contract opportunity is designated as a Total Small Business Set-Aside under the SBA guidelines, specifically targeting certified small businesses for participation in task orders related to construction activities coded under NAICS 236220, which covers commercial and institutional building construction. The contracting entity is NASA Armstrong Flight Research Center, a division of the National Aeronautics and Space Administration, and the opportunity is structured to promote small business involvement by reserving the award exclusively for eligible small business concerns, ensuring they have a fair chance to compete without larger business interference. The solicitation is accessible through the SAM.gov platform with a posting date of July 6, 2026, and while no specific solicitation number is provided, the task order mechanism allows for multiple awards to be issued under the broader contract vehicle. Performance is expected to occur under the jurisdiction of the NASA Armstrong facility, though precise location details such as city, state, or zip are not specified. The opportunity encourages direct participation by small businesses in federal construction projects, with benefits tied to socio-economic set-aside preferences established under FAR 19.5.
Commercial and Institutional Building Construction

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 238990
Federal
Specialty Trade ContractingThis contract is a subcontract under a Total Small Business Set-Aside for specialty trade contracting services focused on roofing, framing, drywall, and insulation for commercial and institutional buildings. The NAICS code 238990 identifies the scope as other specialty trade contractors, excluding construction management or general building projects. The work is tied to NASA Armstrong Flight Research Center under the National Aeronautics and Space Administration, with performance location details unspecified. The opportunity was posted on July 6, 2026, and is intended exclusively for small businesses as defined by the SBA, ensuring all performance and management responsibilities remain within qualifying small business entities. No point of contact or detailed place of performance is provided in the data, but the contractual engagement is accessible via the SAM.gov platform for further information.
All Other Specialty Trade Contractors

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 327320
Federal
Concrete Supply and PlacementThe contract titled Concrete Supply and Placement is a subcontract issued under a Total Small Business Set-Aside authority as defined by FAR 19.5, exclusively available to small businesses. It requires the supply and placement of ready-mix concrete for foundational elements, slabs, and structural components at federal construction sites managed by NASA Armstrong Flight Research Center. The NAICS code 327320 classifies the work under Concrete Product Manufacturing, indicating the primary scope involves both the production and on-site pouring of concrete materials according to federal construction specifications. The contract was posted on July 6, 2026, and performance is expected to occur at various locations under NASA’s jurisdiction, though exact site details are not specified. Only small business concerns are eligible to compete, and the award will be made without full and open competition due to the set-aside designation.
Ready-Mix Concrete Manufacturing

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 237990
Federal
Civil/Earthwork and Site PreparationCivil earthwork and site preparation services are being procured under a small business set-aside subcontract for federal construction projects on NASA Armstrong Flight Research Center property. The work encompasses grading, excavation, drainage systems, and all associated site development activities necessary to prepare land for construction, with the contract governed under NAICS code 237990 for other heavy and civil engineering construction. This opportunity is reserved entirely for small businesses as defined by the Small Business Administration under FAR 19.5, ensuring that only qualified small business subcontractors may bid. The solicitation was posted on July 6, 2026, and performance is expected to occur at various locations within NASA Armstrong’s operational areas, though no specific city or state is listed in the details. No point of contact is provided, and interested parties must access the full solicitation through the official SAM gov portal.
Other Heavy and Civil Engineering Construction

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 238220
Federal
Plumbing and HVAC SystemsThe contract is for the installation and servicing of plumbing, heating, ventilation, and air conditioning systems in institutional buildings under a total small business set-aside designation, reserved exclusively for small businesses as defined by the SBA. It is classified under NAICS code 238220, which specifically covers plumbing, heating, and air-conditioning contractors, and is structured as a subcontract within the NASA Armstrong Flight Research Center’s procurement framework. The work is intended to support operational infrastructure needs at facilities managed by the National Aeronautics and Space Administration, though the exact location of performance is not specified. This opportunity was posted on July 6, 2026, and is available through the SAM.gov platform for eligible small business contractors to pursue.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 238210
Federal
Electrical Systems InstallationThis contract is a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 238210 corresponding to electrical contracting services. It encompasses the full scope of electrical systems installation, wiring, and integration for buildings and infrastructure located on secure federal sites under the jurisdiction of NASA Armstrong Flight Research Center. The work must be performed in compliance with federal security standards and technical specifications applicable to sensitive government facilities, requiring specialized expertise in secure construction environments. The solicitation was posted on July 6, 2026, and the place of performance is tied to NASA Armstrong’s facilities though specific geographic details are not provided. All work must be executed by a small business concern eligible under the SBA’s set-aside program and must align with federal requirements for systems integration and facility infrastructure on secure sites.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 236220
Federal
General Building Construction (Class A/B)This contract is a total small business set-aside for general building construction services classified as Class A/B, encompassing full-scope commercial construction projects such as new builds, renovations, and facility upgrades on secure federal sites within California. The work requires coordinated execution across multiple trades with strict adherence to schedules, ensuring timely delivery on high-security government installations. The North American Industry Classification System code is 236220, identifying the scope as commercial and institutional building construction. The contracting activity is under NASA Armstrong Flight Research Center, part of the National Aeronautics and Space Administration, and the opportunity is exclusively reserved for small businesses as defined by the Small Business Administration under FAR 19.5. The contract was posted on July 6, 2026, and while the exact location details are unspecified, performance is constrained to facilities in California under secure operational conditions.
Commercial and Institutional Building Construction

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Project Management and Technical OversightThis subcontract titled "Project Management and Technical Oversight" involves providing program and technical management services to ensure adherence to the requirements set forth by NASA, the FAA, and the United States Air Force. The scope includes oversight and coordination of classified integration activities, ensuring that sensitive operations are managed securely and in compliance with all relevant regulations. The contract falls under the NAICS code 541611, which relates to administrative management and general management consulting services. The work is to be performed in Ardmore, with the contracting agency being the NASA Armstrong Flight Research Center. The primary objective is to assure that all technical and program management tasks meet strict federal standards, particularly in the context of aerospace research and classified projects. Although details such as solicitation number and specific organizational type or set-aside status are not provided, the contract underscores the critical importance of coordination across multiple federal agencies to maintain compliance and effective integration within aerospace program management.
Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
Systems Integration and Compatibility TestingThis contract involves the integration of new cabin and test systems with the existing avionics and flight controls, ensuring seamless operation and interoperability. The contractor will conduct extensive compatibility and data acquisition testing to validate system performance and data integrity, supporting the overall functionality of the aircraft systems. The work is subcontract-based and falls under the NAICS code 541512, which pertains to computer systems design services. The contract is issued by NASA Armstrong Flight Research Center and is set to be performed in Ardmore, zip code 73401. Although specific details on the solicitation number or set-aside status are not provided, the focus is clearly on enhancing system integration and testing capabilities to support advanced aerospace research and development efforts. The work aims to enable robust system compatibility and ensure the reliable acquisition of essential flight data.
Computer Systems Design Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
Exterior Repainting and NASA Livery ApplicationThe contract involves the removal of existing paint and the application of a new NASA livery on an aircraft's exterior. This includes the precise placement of markings, logos, and the use of durable aerospace-grade coatings designed to withstand operational conditions. The work is linked to NASA Armstrong Flight Research Center and will be performed in Ardmore, ZIP code 73401. This subcontract falls under the NAICS code 325510, which relates to paint and coating manufacturing. The scope emphasizes high-quality finish requirements tailored to aerospace standards, ensuring the aircraft's exterior meets both aesthetic and performance criteria. The contract was posted on June 9, 2026, and is related to specialized repainting services critical for NASA's fleet maintenance and branding.
Paint and Coating Manufacturing

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 336412
Federal
Cabin Interior Modification for Microgravity TestingThis contract involves the redesign and installation of a modified cabin interior specifically tailored for microgravity testing at NASA's Armstrong Flight Research Center. The work includes creating specialized test platforms, restraints, and environmental systems to support microgravity experiments. The project is categorized under NAICS code 336412, indicating its focus on aerospace product and parts manufacturing. The place of performance is Ardmore, with a zip code of 73401, where the modifications and installations will take place. This subcontract aims to enhance the capabilities of the test cabin to simulate microgravity conditions accurately, facilitating critical research and development efforts in spaceflight and related fields. The contract was posted on June 9, 2026, by the National Aeronautics and Space Administration, reflecting ongoing commitments to advancing space research infrastructure.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 811211
Federal
Aircraft Airworthiness Restoration and MaintenanceThis contract involves performing comprehensive maintenance, inspections, repairs, and certifications necessary to restore a Boeing 737-73W aircraft to full compliance with FAA airworthiness standards. The scope ensures the aircraft meets all regulatory requirements for safe and lawful operation. The work is subcontracted under the NAICS code 811211, which pertains to automotive and heavy equipment repair and maintenance, indicating specialized service tailored to aerospace needs. The contract is issued by NASA's Armstrong Flight Research Center and requires execution at the place of performance in Ardmore, with the postal code 73401. Although specific details about the contract’s duration or value are not provided, the emphasis on return to FAA-compliant airworthy status highlights the critical safety and regulatory compliance aspects central to the work. This contract is essential for ensuring the operational readiness and certification of the Boeing 737-73W within NASA’s aviation asset portfolio.
Consumer Electronics Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

N/A
View Details