GLOCK firearms, magazines, associated spare parts, holsters and tools.

SOURCES SOUGHT NOTICE W15QKN-21-X-0EUH The Army Contracting Command - New Jersey (ACC-NJ) on behalf of the Program Manager for Soldier Lethality (PM-SL) and the Combat Capabilities Development Command - Armaments Center (DEVCOM AC) is seeking potential sources to supply various GLOCK firearms, magazines, associated spare parts, holsters and tools. Systems of interest include GLOCK Model 17 (G17), GLOCK Model 19 (G19), and GLOCK Model 26 (G26). Systems of interest include Gen3, Gen4, and Gen5 generations for the models listed as well as MOS and threaded barrel versions where indicated. Optional configurations include night sights or standard sights, metric or standard threads (for threaded barrel variants), extended slide stop lever, extended magazine catch, and optional Maritime Spring Cups. Spare parts include replacement factory GLOCK magazines, Concurrent Spare Parts (CSP) kits for above listed models, as well as - la carte Original Equipment Manufacturer (OEM) spare parts, inclusive of all parts with the exception of slides and frames. Holsters include OEM sport/combat for the listed models and duty holsters for G17 only. Tools include OEM disassembly tool, front and rear sight tools, and cleaning tools (bore brush and rod). The G17, G19, and G26 are lightweight magazine fed pistols without compensated or ported barrels as produced by GLOCK. They are equipped with the - Safe Action System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released. Barrels are equipped with polygonal rifling. The following specifications for each GLOCK System are detailed below: G17 Technical Data Caliber: 9x19mm Magazine capacity - 17 Rounds standard. Barrel length: approx. 114mm (4.49 inches) Weight: approx. 625-630 g (1.4 pounds) G19 Technical Data Caliber: 9x19mm Magazine capacity - 15 Rounds standard. Barrel length: approx. 102mm (4.02 inches) Weight: approx. 600-610 g (1.3 pounds) G26 Technical Data Caliber: 9x19mm Magazine capacity - 10 Rounds standard. Barrel length: approx. 87mm (3.43 inches) Weight: approx. 550-559 g (1.2 pounds) Generation-Specific Characteristics Generation 3 *Finger groove and rail frame (except G26 which lacks the rail) *Non-ambidextrous magazine catch *Single recoil spring guide rod (except G26 which uses dual recoil spring) *Nominal 28N (6.3lb) trigger pull (standard) Generation 4 *Rough textured frame *Enlarged, reversible magazine catch *Dual recoil spring assembly *Modular Back Strap System *Nominal 28N (6.3lb) trigger pull (standard) Generation 5 *Flared magazine well *Glock Marksman Barrel (GMB) *Ambidextrous Slide Stop *No finger grooves *nDLC finish *Reinforced slide rails *Front slide serrations *Interchangeable back straps *Nominal 26N (5.8lb) trigger pull (standard) MOS The Modular Optic System (MOS) allows for the user to change screw-in baseplates for the addition of slide-mounted optical systems. For the purposes of this sources sought the Government is specifically seeking information on the availability of MOS variants of G19 models in Gen3, Gen4, and Gen5. Threaded Barrels A threaded barrel allows for the use of muzzle devices or sound suppressing devices and is available with either standard (-28) or metric (M13.5x1L) threads. For the purposes of this sources sought the Government is specifically seeking information on the availability of MOS variants of G19 models in Gen4 and Gen5 configured with threaded barrels. Night Sights Night sights aid in low-light shooting via self-luminous illuminated iron sight aim points. Extended Slide Stop Lever and Extended Magazine Catch Provide enlarged surface for user to activate. Maritime Spring Cups Maritime spring cups have additional channels on their external bearing surface but are otherwise interchangeable with standard firing pin spring cups. In responding to this Sources Sought Notice, respondents should provide the following information: A detailed description of your capability to deliver firearms, magazines, associated spare parts, holsters and tools including optional configurations and CSP kits for all above listed GLOCK Systems. Details should include technical descriptions of the firearms and included accessories (e.g., quantity and capacity of magazines included with each system) and lists of spare parts offered - la carte as well as those included in CSP kits. A detailed description of your ability to comply with Item Unique Identification (IUID) machine-readable information (MRI) requirements as described in MIL-STD-130, Identification Marking of U.S. Military Property and Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.211-7003. Provide any available data related to testing performed to ensure compliance with MIL-STD-130 specifically as it relates to permanency and legibility. Direct identification marking of the serialized receiver (e.g., by laser) capable of withstanding the intended life cycle should be addressed. If another method is described, that description should include an explanation of the method's relative merits and why it is the equivalent or superior. Describe the time required to prepare an order of up to 5,000 units for DCMA acceptance and transportation of all the above GLOCK Systems. Interested companies capable of meeting the requirements described above are invited to indicate their interest by providing the Government a brief summary of its company's capabilities, including a description of its ability to meet the above-mentioned IUID MRI requirement and delivery requirements. All interested sources shall also provide the organization name, address, point of contact, phone number, e-mail address, taxpayer identification number, DUNS number, and CAGE Code. Company size (please identify as either Large, Foreign, Small, Small Disadvantaged, 8(a), Woman-Owned Small Business, Historically Underutilized Business Zone concern, Veteran-Owned Small Business, or Service-Disabled Small Business). All responding sources must email their response submissions no later than 4:00 PM EST on 23 December 2020 to Barbara Reed, Contract Specialist, margaret.b.reed.civ@mail.mil or Therese M. Grimm, Contracting Officer, therese.m.grimm.civ@mail.mil. This is a Sources Sought Notice only. This notice neither constitutes a Request for Proposal, nor does it restrict the Government from an ultimate acquisition approach. This notice should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this notice. The U.S. Government is not obligated to notify respondents of the results of this notice. If a formal solicitation is generated at a later date, a pre-solicitation notice will be published. No award will be made as a result of this Sources Sought Notice.