GLOVE SET, CHEMICAL

GLOVE SET, CHEMICAL PROTECTIVE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THISDOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSEINFORMATION APPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers andNon-Manufacturers
BUTYL, GLOVES TYPE I ( GLOVES WITH INSERTS ), 25 MIL PGC 01452 NSN Size NIIN X Small 8415 011441862 Small 8415010333517 Medium 8415 010333518 Large 8415 010333519 X Large 8415 010333520 . INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is herebycanceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to this item.
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 8415-01-033-3520 1,000.000 SE $ _______________ $ ______________
GLOVE SET,CHEMICAL
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7018450425 0001 N/A N/A N/A 05/17/2027
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D

SUPPLIES/SERVICES: PGC: 01452
ITEM DESCRIPTION:
GLOVE SET, CHEMICAL PROTECTIVE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THISDOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSEINFORMATION APPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers andNon-Manufacturers
BUTYL, GLOVES TYPE I ( GLOVES WITH INSERTS ), 25 MIL PGC 01452 NSN Size NIIN X Small 8415 011441862 Small 8415010333517 Medium 8415 010333518 Large 8415 010333519 X Large 8415 010333520 . INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is herebycanceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to this item.
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0002 8415-01-144-1862 1,000.000 SE $ _______________ $ ______________
GLOVE SET,CHEMICAL
QTY VARIANCE: PLUS 0% MINUS 0%
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled. In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED ,,MAXIMUMREQUIREMENTS.
PALLETIZATION ,, ,,PALLET PATTERN NOT ASSPECIFIED. ,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING OMITTED; INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION. BOXES OF GLOVES, PACKED ASSPECIFIED, SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH WING-TYPE PALLET AND THE LOAD BONDED.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01452 CONT'D
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0002 7018450425 0002 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01826
ITEM DESCRIPTION:
GLOVES, CHEMICAL PROTECTIVE
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSEINFORMATION APPLIES
TYPE III ( GLOVES ONLY ), 7 MIL . INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
Future acquisitionsmay refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for their particular application before citing it as areplacement document.
(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the StandardizationDocument Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available onlineat http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirementRS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to this item.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0003 8415-01-138-2501 800.000 PR $ _______________ $ ______________
Butyl Gloves,Chem Protective, 7Mil
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
MARKINGSHALL BE IN ACCORDANCE WITH
MIL-STD-129P.
SPECIAL MARKING CODE:
TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN
ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR
THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED
IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT
SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS
PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE
DEFECT
MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled. In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUMREQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT ASSPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
DOD BAR CODE MARKING REQUIRED IN
ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN
ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR
THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED
IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT
SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS
PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE
DEFECT
MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0003 7018450425 0003 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01826
ITEM DESCRIPTION:
GLOVES, CHEMICAL PROTECTIVE
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSEINFORMATION APPLIES
TYPE III ( GLOVES ONLY ), 7 MIL . INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
Future acquisitionsmay refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for their particular application before citing it as areplacement document.
(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the StandardizationDocument Order
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available onlineat http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirementRS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to this item.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0004 8415-01-138-2502 800.000 PR $ _______________ $ ______________
GLOVES,CHEMICAL
PRO
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN ACCORDANCE WITH MIL-STD-129P.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR
THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED
IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT
SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS
PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE
DEFECT
MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled. In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUMREQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT ASSPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT
SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS
PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE
DEFECT
MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
.
Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01826 CONT'D
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0004 7018450425 0004 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01848
ITEM DESCRIPTION:
GLOVES, CHEMICAL PROTECTIVE
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements(SAE AS9100) for Manufacturers and Non-Manufacturers
BUTYL, GLOVES TYPE II ( GLOVES ONLY), 14 MIL THE COLOR SHALL BE BLACK Small8415 011382497 Medium 8415 011382498 Large 8415 011382499 X Large 8415 011382500 INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITHFAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is herebycanceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to this item.
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0005 8415-01-138-2497 800.000 PR $ _______________ $ ______________
GLOVES,CHEMICAL
PRO
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. .
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled. In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUMREQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT ASSPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED ,,MAXIMUM REQUIREMENTS.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF ITEM WITH A SHELF LIFE 60 MONTHS . Preservation and packagingshall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type II chemical protective gloves with instruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall bepositioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to be read.The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
made as close as pssible to the open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within thebag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in a fiberboardshipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118.The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimumgrade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside ofthe individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BEEXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BES-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED,INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATEAPPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING,IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG.,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OFPAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED ANDPALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNITLOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSEDIN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED ,,MAXIMUMREQUIREMENTS.
PALLETIZATION ,, ,,PALLET PATTERN NOT ASSPECIFIED. ,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING OMITTED; INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED AS SPECIFIED,
SHALL BEPALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANY SPECIAL MARKING REQUIREDBY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0005 7018450425 0005 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01848
ITEM DESCRIPTION:
GLOVES, CHEMICAL PROTECTIVE
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements(SAE AS9100) for Manufacturers and Non-Manufacturers
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
BUTYL, GLOVES TYPE II ( GLOVES ONLY), 14 MIL
THE COLOR SHALL BE BLACK
Small8415 011382497 Medium 8415 011382498 Large 8415 011382499 X Large 8415 011382500 INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITHFAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is herebycanceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to this item.
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0006 8415-01-138-2498 800.000 PR $ _______________ $ ______________
GLOVES,CHEMICAL
PRO
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIREDIN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDREDUNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED ,,MAXIMUM REQUIREMENTS.
PALLETIZATION ,, ,,PALLETPATTERN NOT AS SPECIFIED. ,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING OMITTED; INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OFGLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
TYPE II SHELF LIFE ITEM SHELF LIFE 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled. In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS.
DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,
,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUMREQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT ASSPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PACKAGING.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS. THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE DEFECT FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED ,,MAXIMUM REQUIREMENTS.
PALLETIZATION ,, ,,PALLETPATTERN NOT AS SPECIFIED. ,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING OMITTED; INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS. . Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFEMARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
DOD BAR CODE MARKINGREQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS PERHUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,, ,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,, ,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED CONTAINER.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
GLOVES
NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATIONEXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLETPATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED ASSPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIALMARKING CODE:00 -00 No special marking
NOTE: THIS IS A TYPE II SHELF ITEM WITH A SHELF LIFE 60 MONTHS . Preservation and packagingshall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type II chemical protective gloves with instruction sheet shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall bepositioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to be read.The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as pssible to the open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within thebag shall be expelled. In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in a fiberboardshipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118.The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimumgrade 200 of ASTM-D1974 and ASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside ofthe individual bag.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
MARKING SHALL BE IN ACCORDANCE WITH
MIL-STD-129P. SPECIAL MARKING CODE:
TYPE II SHELF LIFE MARKINGS.
NOTE: TYPE II SHELF LIFE 60 MONTHS.
DOD BAR CODE MARKING REQUIRED IN
ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BEEXAMINED FOR
THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED
IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT
SHALL BES-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS
PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE
DEFECT
MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)
,,,,,,OMITTED,INCORRECT, ILLLEGIBLE, OF ,,
,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD
OF APPLICATION.
MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS
SPECIFIED.
WORKMANSHIP INADEQUATEAPPLICATION OF COMPONENTS ,,,,,,,,,,
,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,
LOOSE STRAPPING,IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.
OPEN
AND NONCONTINUOUS HEAT SEALED SEAMS
AND CLOSURE OF POLYETHYLENE BAG.,,,,,,,,,,,,,,
,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED
CONTAINER.
GLOVES
NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE
CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT
NUMBER
OFPAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN
REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED ANDPALLETIZED END ITEMS SHALL BE
EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE
SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNITLOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY
PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSEDIN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUMREQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT ASSPECIFIED.
,,,,LOAD NOT BONDED AS SPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED AS SPECIFIED,
SHALL BEPALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANY SPECIAL MARKING REQUIREDBY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
NOTE: THIS IS A TYPE II SHELF ITEM WITH A SHELF LIFE 60 MONTHS . Preservation and packaging shall be Level C/C inaccordance with ASTM-D3951. In addition, one pair of Type II chemical protective gloves with instruction sheet shall be unit packedin a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to be read. The polyethylene bag shall be formedwith heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closureof the bag shall be heat sealed with the seal made as close as pssible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled. Inaddition, one hundred and forty-four (144) glove sets of one size only shall be packed in a fiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTMD1974 and ASTM-D5118. The inside of each shippingcontainer shall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.
A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.
MARKINGSHALL BE IN ACCORDANCE WITH MIL-STD-129P. SPECIAL MARKING CODE: TYPE II SHELF LIFE MARKINGS. NOTE: TYPE II SHELF LIFE 60 MONTHS. DOD BAR CODE MARKING REQUIRED IN ACCORDANCE WITH MIL-STD-129P.
THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR THE DEFECTS LISTEDBELOW. THE LOT SIZE SHALL BE EXPRESSED IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT SHALL BE S-2 AND THE AQL, EXPRESSED INTERMS OF DEFECTS PER HUNDRED UNITS SHALL BE 2.5.
EXAMINE DEFECT MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS) ,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF,, ,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.
MATERIALS ANY COMPONENTMISSING, DAMAGED OR NOT AS SPECIFIED.
WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS,,,,,,,,,, ,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP, LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING ORINADEQUATE STAPLING. OPEN AND NONCONTINUOUS HEAT SEALED SEAMS AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,, ,,INCORRECTLY FABRICATED BAG. BULGED OR,,,,,,,,,,,,,,DISTORTED CONTAINER. GLOVES NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.
CONTENT NUMBER OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MOREOR LESS THAN REQUIRED.
PALLETIZATION EXAMINATION.
THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
EXAMINED FOR THE DEFECTSLISTED BELOW. THE LOT SIZE
SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.
THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOADFULLY
PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN
TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE6.5.
EXAMINE
DEFECT
FINISHED DIMENSIONS,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED
,,MAXIMUM REQUIREMENTS.
PALLETIZATION
,,
,,PALLET PATTERN NOT AS SPECIFIED.
,,,,LOAD NOT BONDED ASSPECIFIED.
WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.
MARKING
OMITTED;
INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,
SEQUENCE OR ,,,,,,,,,,,,,,METHOD OFAPPLICATION.
PALLETIZATION.
BOXES OF GLOVES, PACKED AS SPECIFIED,
SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH
WING-TYPE PALLET AND THE LOAD BONDED.
MARKING.
IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT
OR PURCHASE ORDER, UNIT PACKS, SHIPPINGCONTAINERS AND PALLETIZED UNIT
LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0006 7018450425 0006 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01848
SPE1C1-27-Q-0172
SECTION B
SUPPLY/SERVICE: PGC: 01848 CONT'D
ITEM DESCRIPTION:
GLOVES, CHEMICAL PROTECTIVE
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I'

Description truncated.