Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Government-Conducted Production Lot Testing for NSN Assemblies

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to government-led testing of cable assemblies associated with National Stock Numbers, encompassing environmental stress screening, electrical performance validations, and comprehensive lot compliance reporting to ensure adherence to military specifications. These tests are conducted to verify the reliability and functionality of assemblies under rigorous operational conditions, with all results documented to confirm regulatory and quality standards. The work is executed as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense, and is classified under NAICS code 541380 for engineering services. The performance of the testing is not tied to a specific geographic location, and the contract was made available for solicitation on July 21, 2026, with no set-aside provisions applied. The official record of the award can be referenced through the DIBBS system under contract number SPE4A626P8856.

General Info

Government testing of cable assemblies for military specs via DLA subcontract, no geographic or set-aside restrictions.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A626P8856.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPEC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Execution of government-led testing on cable assemblies including environmental stress screening, electrical checks, and lot compliance reporting.

Similar Contracts

Same NAICS industry code

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Production Lot Testing (PLT) and Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Non-Destructive Testing (NDT) & Specialized Inspection

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Independent Testing & CommissioningThis subcontract for Independent Testing and Commissioning supports prime contractors on Department of the Air Force 36 CONS projects. The scope of work involves performing third-party quality assurance, independent testing, and final system commissioning to ensure all installed systems meet required standards. These activities are governed by a formal quality management plan and include conducting milestone inspections and providing final commissioning sign-off. The contractor is responsible for delivering comprehensive testing reports and inspection certifications to the Department of Defense. Classified under NAICS code 541380, the project focuses on rigorous verification and validation processes to ensure operational readiness and system integrity for the agency.

FA5240 36 Cons Lgc

POSTED

about 6 hours ago

DEADLINE

Fuel System Integrity Testing & CalibrationThis subcontract, titled Fuel System Integrity Testing and Calibration, involves providing specialized technical services for US Coast Guard fuel system projects at Station Sand Key in Clearwater Beach. The scope of work includes performing line leak detection, conducting integrity tests on transition sumps and Under Dispenser Containment, and calibrating clock gauges with 90 percent high-level warning alarms. The selected provider is responsible for delivering all calibrated gauges and certified test reports to the prime contractors. Managed under the Department of Homeland Security for Base Miami Beach, this opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 29, 2026, with a response deadline of November 13, 2026.

Base Miami Beach

POSTED

about 6 hours ago

DEADLINE

ENVIRONMENTAL QUALIFICATION TESTING (EQT)

Solicitation # N0016427SNC12

The US Navy, through NSWC Crane, is issuing a Request for Information (RFI) under announcement N00164-27-S-NC12 to identify qualified contractors capable of performing Environmental Qualification Testing (EQT) and electromagnetic compatibility (EMI) testing. The objective is to verify that the Combined All-Domain Command and Control System Afloat (CAC2S Afloat) Data Processing Assembly and Workstation Mount meet naval shipboard survival and operational requirements following a hardware technology refresh. Testing must adhere to several military standards, including MIL-DTL-901E for shipboard shock, MIL-STD-167-1A for vibration, MIL-STD-461G for electromagnetic interference, MIL-STD-810H for environmental engineering, and MIL-STD-1399 for shipboard power interfaces. Interested parties must be registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access the full Statement of Work. The government is seeking capabilities and budgetary estimates from commercial firms, non-profits, and academic institutions, with a strong encouragement for small and disadvantaged businesses to respond. Submissions, which may include a white paper of up to five pages and company literature, are due by November 18, 2026. While this RFI is used for market research to determine if the effort should be pursued via sole source or competitive procurement, the government explicitly states that no funding is currently available and this notice does not constitute a formal solicitation or commitment to award a contract.

POSTED

about 6 hours ago

DEADLINE

OGDC-SCM-SER-CB-DO-342367717-2026 HIRING OF TUBULAR INSPECTION SERVICES

Solicitation # OGDC-SCM-SER-CB-DO-342367717-2026

The Oil & Gas Development Company Limited (OGDCL) has issued solicitation number OGDC-SCM-SER-CB-DO-342367717-2026 for the hiring of tubular inspection services to be performed in Pakistan. This procurement opportunity was posted on October 29, 2026, and requires interested parties to submit their e-bids through the SAP Ariba Discovery portal. The deadline for bid submissions is November 16, 2026, at 14:30 hours, with bid openings scheduled to occur 30 minutes after the closing time. Administrative inquiries and coordination are managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. While the specific contract value and detailed performance schedules are not provided in the initial solicitation notice, the primary objective is the procurement of specialized tubular inspection services.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 7 hours ago

DEADLINE

Construction Testing and Inspection Services

City of Roseville

POSTED

about 8 hours ago

DEADLINE

Independent Performance Verification and TestingThis subcontract, titled Independent Performance Verification and Testing, is issued by the National Research Foundation of Korea for work to be performed in South Korea. The project focuses on providing third-party testing and certification for prime contractors involved in International Joint Research Rapid Support Project optical interconnect initiatives. The selected provider will act as an independent evaluation agency to verify that performance meets all required technical specifications. The scope of work involves measuring response characteristics and modulation bandwidth utilizing specialized equipment, including optical power meters, spectrum analyzers, and high-speed oscilloscopes. The primary deliverable for this engagement is the production of official certified test reports. Interested parties should note the response deadline of November 11, 2026.

National Research Foundation of Korea

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Sampling and Laboratory AnalysisThis subcontract opportunity is for the provision of hazardous materials sampling and laboratory analysis services at California State University, Chico. The selected vendor will be responsible for performing chemical and physical analyses on material and air samples, specifically testing for the presence of asbestos, lead, and PCBs. All work must be conducted through an appropriately licensed and accredited laboratory facility to ensure the delivery of certified test reports and accurate analysis data for prime contractors. The project is located in Chico, California, and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 12, 2026. This contract focuses on maintaining safety and compliance through rigorous baseline and air sample analysis for various hazardous materials projects across the university campus.

California State University, Chico

POSTED

about 9 hours ago

DEADLINE

Specialized Testing and Materials Lab ServicesThis subcontract for Specialized Testing and Materials Lab Services supports prime contractors on facility projects at California State University, Chico. The selected provider will perform a variety of critical construction material evaluations, including concrete slump tests, cylinder breaks, soil compaction, Proctor tests, asphalt density testing, and non-destructive steel and weld testing. To ensure quality and compliance, the contractor must utilize accredited laboratory facilities and maintain AASHTO or ASTM accreditation. The scope of work requires the delivery of certified laboratory test reports and detailed field testing logs. This opportunity is categorized under NAICS code 541380 and is based in Chico, California. Interested parties must submit their responses by the deadline of November 12, 2026.

California State University, Chico

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lead-Acid Sealed Gel Electrolyte Storage Battery SupplyThis subcontract through the Defense Logistics Agency involves the supply of one lead-acid, sealed, gel electrolyte storage battery, identified by NSN 6140-01-310-7173. The contractor is responsible for ensuring the item is marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed battery is required FOB Destination. The opportunity falls under NAICS code 335910 and is associated with the Department of Defense. The place of performance is located in North Little Rock, Arkansas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 29, 2026.

Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Plastic Press Strips

Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of NSN 4820013550268This subcontract involves the procurement of one unit of NSN 4820013550268 to support prime contractors under the Defense Logistics Agency. The selected provider is responsible for sourcing the specific part and ensuring all items are packaged according to ASTM D3951 standards. Additionally, all packaging must be marked and labeled in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 423830 and requires delivery of the unit FOB Destination to a performance location in FPO 96673. Interested parties must submit their responses by the deadline of November 9, 2026, for this Department of Defense requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Polyurethane Coating Material SupplierThis subcontract with the Defense Logistics Agency involves the supply of black two-component polyurethane coating touch-up pens, specifically NSN 8010015603448, for prime contractors. The requirement consists of one box of 24 pens delivered FOB Destination to Travis AFB. The supplier must adhere to strict packaging and marking standards including RP001, IP025, MIL-STD-2073-1E, and MIL-STD-129, while performing quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor is required to comply with DFARS 252.225-7001 Buy American standards.

Paint and Coating Manufacturing

POSTED

about 1 hour ago

DEADLINE

Pneumatic Tire Valve SupplierThis subcontract opportunity is for the supply of six pneumatic tire valves, specifically part NSN 2640-01-583-8571, to support prime contractors delivering for the Defense Logistics Agency under the Department of Defense. The performance location for this contract is Mechanicsburg, Pennsylvania, and the procurement falls under NAICS code 488190. Eligible suppliers must possess a valid Unique Entity Identifier and CAGE code to be considered. The contract mandates shipping via FOB Origin and enforces a strict delivery timeline of five days. Interested parties must submit their responses by the deadline of November 9, 2026.

Other Support Activities for Air Transportation

POSTED

about 1 hour ago

DEADLINE

Supply of Critical Application Check Valves (NSN 4820014168804)This subcontract involves the procurement and delivery of three specialized check valves for prime contractors working on Defense Logistics Agency Weapons Support Maritime Hardware projects. The required components must match NSN 4820014168804 and be sourced as genuine parts from approved manufacturers, specifically Parker-Hannifin, Aerocontrolex Group, or Eaton Corporation. Due to the nature of these components as Critical Application Items, the supplier is required to provide Certificates of Conformance. The contract falls under NAICS code 423830 and is managed through the Department of Defense. Interested parties must respond by November 9, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

PLASTIC STRIP, PRESS

Solicitation # SPE8E5-27-T-0390

Solicitation SPE8E5-27-T-0390 is a small business set-aside request for quotation issued by the Defense Logistics Agency for the procurement of one plastic press strip, identified by NSN 9330-01-679-0943. The item is subject to a non-extendable shelf life of 36 months and must be delivered FOB Origin to Hattiesburg, Mississippi, within 20 days after the order is placed, with an original required delivery date of March 30, 2026. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting requirements is mandatory. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Plastics Material and Resin Manufacturing

POSTED

about 1 hour ago

DEADLINE

LIGHT, ULTRAVIOLET, D

Solicitation # SPE8E6-27-T-0477

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0169

POSTED

about 1 hour ago

DEADLINE

CONTAINER, FREIGHT, UTIL

Solicitation # SPE8ED-27-Q-0082

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E5-27-Q-0044

POSTED

about 1 hour ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1324

Solicitation SPE7MC-27-T-1324 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for one fluid valve stem, identified by NSN 4820-01-355-0268. The requirement specifies a delivery timeline of 20 days after the order, with shipping terms set as FOB Destination to the USS North Carolina SSN 777. The award may be processed via automated award, and a price evaluation preference is available for HUBZone small business concerns. The contract imposes strict technical and security requirements, including compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Quality standards mandate that the manufacturer's inspection system comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Non-Destructive Testing (NDT) Services for Aerospace Components

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Compliance Testing

Defense Logistics Agency

POSTED

DEADLINE

Test Equipment and Calibration Services for First Article Testing

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Quality Inspection and Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and First Article Testing

Defense Logistics Agency

POSTED

CLOSED

Magnetic Particle Inspection (MPI) Services for NSN 6850015717370

Defense Logistics Agency

POSTED

DEADLINE

Production Lot Testing (PLT) Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection & First Article Testing (FAI)

Defense Logistics Agency

POSTED

DEADLINE

Military Packaging and Preservation Services

Defense Logistics Agency

POSTED

DEADLINE

Production Lot Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Material Notification & Labeling (If Applicable)

ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS