Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE4A7-26-Q-0970Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a Parts Kit, Receptacle, with a quantity of eight units, under purchase request 7017408641, and has a delivery requirement of 450 days after award. The item is identified by NSN/Part Number 0001S00000052 and is procured under solicitation SPE4A7-26-Q-0970, which is a Total Small Business Set-Aside. Technical and quality requirements are referenced through R and I numbers from the DLA Master List, with specific revisions controlling based on acquisition type and amendment dates. Packaging must comply with DLA requirements, and the item is subject to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessor. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and configuration changes require formal Engineering Change Proposal requests. Inspection and acceptance occur at the origin, and non-accepted supplies must have government identification removed. The item requires physical marking but does not need Item Unique Identification as specified by the service customer. Technical data associated with the item is export-controlled under ITAR or EAR, restricting disclosure to foreign persons anywhere, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract is managed by the Department of Defense’s ASC Supplier Oper AE and AF Div, with primary point of contact TSAONE TLALE, and responses are due by August 14, 2026.

General Info

Eight receptacle parts kits under small business set-aside, 450-day delivery, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE4A7-26-Q-0970.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
TSAONE TLALE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARTS KIT, RECEPTACLE.
ENGINEERING NOTES/EXCEPTIONS LOADED AS A DRAWING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 8 EA Purchase Request: 7017408641QTY - See Solicitation Delivery: 450 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
Gear and Transmission Component SupplyThe contract pertains to the supply of precision-machined components including gears, shafts, bearings, and transmission sub-assemblies specifically designed for use within tractor drive units. These parts are critical to the mechanical functionality and performance of military-grade equipment, requiring high standards of engineering precision and material durability. The solicitation is issued as a subcontract under NAICS code 332994, indicating the focus is on other fabricated metal product manufacturing, with performance expected to occur in New Cumberland, Pennsylvania, at the designated zip code 17070-5002. The opportunity was posted on August 4, 2026, with a firm response deadline of August 7, 2026, leaving a narrow three-day window for potential suppliers to submit proposals. While no set-aside classification or agency-specific procurement restrictions are specified, the contract is managed by the Department of Defense through its Construction & Equipment Manufacture and Construction division. All submissions must be made through the DIBBS platform, with the official solicitation accessible via the provided UI link. Suppliers are expected to meet stringent quality and delivery criteria consistent with defense production requirements.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
Hose Assembly Supply and DeliveryThe contract entails the supply and delivery of four nonmetallic hose assemblies, identified by NSN 4720011546337, each equipped with permanent fittings that meet specified military and Defense Logistics Agency standards. These assemblies are intended for use within defense systems and must adhere to strict quality and performance criteria established by the Department of Defense. The contract is classified as a subcontract under NAICS code 332994, indicating specialized manufacturing activities not elsewhere classified, and was posted on August 4, 2026, with no set-aside provisions for small or disadvantaged businesses. Performance is expected to be carried out under the purview of the Defense Logistics Agency, though specific delivery locations and points of contact are not detailed. The award reference number SPE7M326V3919 is linked to the official DIBBS portal for tracking and administrative purposes.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332994
New
DIBBS
DOOR, ACCESS, WEAPON
Solicitation # SPE4A6-26-U-3305
This contract pertains to the procurement of a Door, Access, Weapon System identified by NSN 5342-01-106-6632, with a quantity of 64 units, under solicitation SPE4A6-26-U-3305. The requirement is set aside exclusively for small businesses, as defined under FAR 19.5, and falls under NAICS code 332994. Delivery is mandated within 116 days after order placement. Compliance with stringent technical and quality standards is required, incorporating specifications from the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item is subject to rigorous inspection and acceptance protocols at origin, governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes must be classified with specific verification levels or AQLs. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons or entities without prior authorization, and access is limited to contractors holding approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaires. Physical identification and marking of items must meet explicit CMMC Level 2 and RQ017 requirements, and all government identification must be removed from non-accepted supplies. Packaging must adhere to DLA procurement standards, and point of contact for inquiries is Heather Spadaro of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HANDLE, PUMP
Solicitation # SPE4A7-26-T-609P
The contract pertains to the procurement of 50 pump handles identified by NSN 5342008679546 under solicitation SPE4A7-26-T-609P, with delivery required within 33 days of shipment. The order is split into three line items totaling 50 units—7 units for delivery to Tinker AFB, Oklahoma; 10 units to Hill AFB, Utah; and 33 units to Robins AFB, Georgia—each with a unit price of $1.00, resulting in a total contract value of $50.00. All items must be packaged in accordance with ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with DLA Packaging Requirements RP001, with the Unit of Issue as EA and Quantity per Unit Pack as 1. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date for all items is October 5, 2026, though each line item has a separate need ship date between May and December 2026. Packaging and shipping instructions, including freight and parcel post addresses, are specified for each location, and all requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM standards where applicable. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
CHARGING LEVER
Solicitation # SPE7LX-26-U-9282
The charging lever, identified by NSN 1005-01-657-2843, is a defense-related item subject to strict export controls under either ITAR or EAR, meaning any transfer of technical data associated with it—whether physical, electronic, or verbal to foreign persons regardless of location—requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. Only two units are being procured under Purchase Request 1000239117 with delivery due 139 days after order. The solicitation, numbered SPE7LX-26-U-9282, was posted on August 4, 2026, with responses due by August 19, 2026, and is set aside exclusively for small businesses under NAICS code 332994. The procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A6-26-T-11SY
The contract is for the procurement of seven grooved couplings and clamps, identified by NSN 5342010178437, with a unit price of $7.00 per item, resulting in a total contract value of $49.00. Delivery is required within 171 days from the contract date, with shipment terms FOB origin and no variance allowed in quantity; the full order of seven units must be delivered without deviation. Inspection and acceptance both occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA’s RP001 packaging guidelines. Mercury and mercury compounds are explicitly prohibited in all preservation, packaging, and marking processes. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery deadline of July 5, 2027. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the solicitation was issued under contract number SPE4A6-26-T-11SY with a response deadline of August 12, 2026. The procurement falls under NAICS code 332994 and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
GATE, GUIDE
Solicitation # SPE7L3-26-T-147C
The contract pertains to the procurement of three units of a GATE, GUIDE component identified by NSN 1005-01-324-3094 under solicitation SPE7L3-26-T-147C, with a delivery deadline of 318 days from award. The requirement is governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications referenced by R or I numbers, and compliance with tailored higher-level quality standards for both manufacturers and non-manufacturers. Demilitarization protocols for Category I munitions items apply, and cybersecurity requirements mandate CMMC Level 2 self-assessment or certification by an accredited third-party organization. Export control restrictions are in effect due to the presence of technical data subject to ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and official approval. Packaging must adhere to DLA standards, and inspection and acceptance occur at origin. Item Unique Identification is waived per customer request, but physical marking and removal of government identification from non-accepted supplies are required. Configuration changes require formal engineering change proposals or variance requests. The place of performance is New Cumberland, PA, with Katelyn Young of the Department of Defense serving as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
FAIRLEAD, TUBULAR
Solicitation # SPE4A7-26-T-610P
The contract pertains to the procurement of two tubular fairleads, identified by NSN 5342-01-220-7044, under solicitation number SPE4A7-26-T-610P, with a delivery requirement of 171 days after order. All supplies must comply with the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered standards referenced in the official DLA repository. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Commercial off-the-shelf items are accepted provided the agency has adequate commercial catalog data. The item is to be delivered to New Cumberland, Pennsylvania, with the Department of Defense as the procuring agency under NAICS code 332994. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and all applicable revisions to technical and quality standards are controlled by the solicitation issue date unless amended. Primary point of contact is Jamiah Sutton at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
HOUSING, FEEDER-DELI
Solicitation # SPE7LX-26-U-8874
This contract under solicitation SPE7LX-26-U-8874 is an indefinite-delivery contract issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate for the procurement of Housing, Feeder-Deli items identified by NSN 1005-01-477-6396. The estimated quantity is 13 units, though this is non-binding and subject to actual delivery order placement within a contract ceiling of $350,000. Delivery is required within 94 days of award, with FOB Origin terms applying, and acceptance occurs at the destination. Packaging and marking must strictly adhere to MIL-STD-129 and DLA’s RP001 packaging requirements, with palletization following DLA standards; while ASTM D3951 is referenced, it is subordinate to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware except for specific functional exemptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates a comprehensive set of federal and defense acquisition regulations, including mandatory cybersecurity requirements under CMMC Level 2 self-assessment and the NIST SP 800-171 DOD Assessment Requirements, with stringent safeguarding of covered defense information as defined in FAR 52.227-1 and DFARS 252.204-7012. Contractors must comply with trafficking in persons, employment eligibility verification, sustainable product, and equal opportunity clauses, with deviations noted for several clauses. All offerors must provide a UEI and CAGE code and represent their small business status, including socioeconomic categories such as WOSB, EDWOSB, SDVOSB, or HUBZone, and disclose any involvement with covered defense telecommunications equipment or services. Invoicing must be conducted electronically through WAWF using permitted document types, and the contract prohibits surplus supplies. The award will be made under simplified acquisition procedures using Standard Form 18 submitted via the DIBBS portal by the August 4, 2026 deadline, with no paper submissions accepted.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L7-26-Q-2111
The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
STOP, DRAWER
Solicitation # SPE4A7-26-T-610W
This contract is a total small business set-aside under solicitation SPE4A7-26-T-610W for the procurement of 30 units of part number 575089 identified by NSN 5342012342741, designated as a critical application item and supplied by R F PRODUCTS, INC. (CAGE 58022). The delivery is required within 171 days of award with FOB origin terms, inspection and acceptance occurring at destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, preservation method 10, and unit container D3, with all marking adhering to MIL-STD-129 and no special markings required. Palletization must also follow DLA standards, and the parcel post and freight shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware, supply, or packaging materials, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents under NAVSEA 5100-003D, which must include secondary containment and be shockproof. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The required delivery date is August 7, 2027, with a need ship date of January 31, 2027, and the solicitation closed on August 12, 2026, with Michael Johnson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALL
Solicitation # SPE7L3-26-T-146L
The contract is for the procurement of four units of a small storage rack identified by NSN 1095-01-710-8626 and part number UWRM7U, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and container codes. Marking must adhere to MIL-STD-129 with no special markings, and palletization must follow DLA packaging requirements. The goods are to be shipped via traceable means—parcel post is prohibited—to the designated government facility at Fort Carson, Colorado. The contractor is required to retain complete supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L3-26-T-146L, issued on August 4, 2026, with a response deadline of August 17, 2026. The primary point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 484121
New
DIBBS
Transportation and FOB Destination Delivery Services
General Freight Trucking, Long-Distance, Truckload

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 518210
New
DIBBS
Supply Chain Traceability and Documentation Management
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Defense Logistics Packaging and Labeling Services
Commercial Printing (except Screen and Books)

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Defense-Grade Machine Screws
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493130
New
DIBBS
Warehousing and Storage of Finished Harness InventoryThe contract entails the secure, climate-controlled warehousing and inventory management of finished oxygen cylinder carrying harnesses, ensuring all items are stored under strict environmental controls to maintain product integrity until authorized government shipment. Full traceability of inventory is required at every stage, with comprehensive documentation and audit-ready systems in place to support governmental compliance and accountability. The storage facility must support accurate real-time tracking, inventory reconciliation, and controlled access protocols to prevent loss, damage, or unauthorized handling. This is a total small business set-aside subcontract classified under NAICS code 493130, designated for businesses certified under the SBA program, and issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026. While specific performance location details are not provided, the contractor is expected to comply with all federal contract requirements including security standards, supply chain integrity, and timely delivery readiness for government distribution. All operations must align with Department of Defense logistics protocols and maintain unwavering readiness for inspection and audit.
Farm Product Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation of Finished HarnessesThe contract entails the transportation and delivery of finished oxygen cylinder carrying harnesses from the manufacturing site to designated government locations, requiring full compliance with Department of Defense shipping standards. All logistics operations must adhere to stringent military transportation protocols to ensure the safe and timely movement of these critical medical equipment components. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 484220 specifically identifies this as a heavy and tractor-trailer trucking service. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026, and the overseeing agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur at unspecified government destinations, and all shipments must meet DoD requirements for handling, tracking, and documentation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 423220
New
DIBBS
Wholesale Supply of Tactical Harness Hardware and ComponentsThe contract solicits the wholesale supply of certified buckles, fasteners, and other hardware components critical to the assembly of oxygen cylinder carrying harnesses, requiring full traceability and documented compliance with military-grade standards. All items must meet precise technical specifications to ensure reliability and safety in tactical and emergency medical applications, with rigorous quality control processes enforced throughout production and delivery. The award will be made under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and is classified under NAICS code 423220 for merchant wholesalers of hardware and plumbing and heating equipment. The opportunity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV and is issued as a subcontract, indicating it supports a larger procurement program. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026. Performance locations are not specified, suggesting the components may be delivered to multiple DoD sites or integrated into broader logistics networks. All suppliers must provide complete documentation to ensure end-to-end traceability of materials and manufacturing processes, enabling compliance with defense supply chain security protocols and regulatory requirements.
Home Furnishing Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 315990
New
DIBBS
Supply of Raw Materials and Components for Harness AssemblyThe contract entails the supply of military-grade webbing, straps, padding, and thread specifically engineered for the assembly of oxygen cylinder carrying harnesses, with stringent requirements for full traceability and adherence to defense specifications. All materials must meet exacting performance and durability standards required for mission-critical defense applications, ensuring reliability under extreme operational conditions. The subcontract is issued as a total small business set-aside under the SBA program, reserved exclusively for small businesses certified to fulfill federal contracting obligations under FAR 19.5, with the NAICS code 315990 classifying the work within the other textile product mills category. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026, under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The performance location is not specified beyond agency oversight, and the contract is managed through the DLA Dibbs system with the solicitation number SPE4A726R0710. Bidders must demonstrate capability to deliver compliant materials with documented chain-of-custody and quality control processes aligned with defense supply chain integrity requirements. Successful vendors will support logistics and life-safety systems essential to military operations, emphasizing quality, compliance, and timely delivery without deviation from technical specifications.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacturing of Oxygen Cylinder Carrying HarnessesThe contract encompasses the manufacture, quality assurance, packaging, and delivery of Oxygen Cylinder Carrying Harnesses identified by National Stock Number 005712239, a life support item critical to mission-critical operations. Strict quality control and full traceability requirements are mandated due to the item’s essential role in medical and emergency support systems, demanding rigorous adherence to established standards throughout all production phases. The manufacturing process must ensure durability, reliability, and compliance with all applicable military specifications, with each unit subjected to thorough inspection and documentation to guarantee performance under demanding conditions. This acquisition is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to respond, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 339920 indicates the work falls under Other Miscellaneous Manufacturing, aligning the scope with specialized fabrication of non-electronic medical or safety equipment. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur under the oversight of this agency, with no specific location designated, allowing flexibility for qualified small businesses to fulfill the requirement while maintaining full compliance with federal defense procurement protocols.
Sporting and Athletic Goods Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.
Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details