Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE4A5-26-Q-0724Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense ASC Supplier Oper OEM Division is for the procurement of three metal tube assemblies under part number 0001S00000052. The contract requires delivery within 358 days after the order is placed and specifies performance at Robins Air Force Base. Key compliance mandates include adherence to DLA packaging requirements, higher level contract quality standards, and configuration change management protocols. The contract involves strict security and regulatory constraints, including CMMC Level 2 certification and the handling of covered defense information. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data. While physical identification and bare item marking are required, item unique identification is not necessary per the service customer.

General Info

DoD procurement of three metal tube assemblies for delivery to Robins Air Force Base.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-Q-0724.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Kendra Coleman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE ASSEMBLY, METAL
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 3 EA Purchase Request: 7017227915QTY - See Solicitation Delivery: 358 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-26-T-8700
This contract is for the procurement of 211 packages of steel pipe couplings, specifically female adapter unions with 1/2 inch NPTF to NPSM external swivel pipe threads. The items must be manufactured in accordance with SAE standards for hydraulic tube fittings and TDP Rev B Gen 3 per SAE J514-3. The procurement is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M3-26-T-8700, with a required delivery date of January 26, 2027. Key requirements include adherence to DLA packaging standards, ASTM D3951, and MIL-STD-129 for marking and labeling. Quality assurance will be conducted at the destination using sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract strictly prohibits the use of Class I ozone depleting chemicals. Delivery is set as FOB Origin and should be shipped to the DLA Distribution New Cumberland facility in Pennsylvania.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L4-26-T-6628
This contract is for the procurement of metal tube assemblies designed for light armored E/I vehicles, specifically identified by NSN 4710011578970 and General Dynamics Land Systems Canada part number 10500596. The order consists of 25 units of issue, where each unit is defined as a pair, totaling 50 individual assemblies. The delivery is required within 160 days after the order, with a need ship date of February 16, 2027, and a final required delivery date of February 20, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract is managed by the Department of Defense under solicitation number SPE7L4-26-T-6628 and requires strict adherence to the DLA Master List of Technical and Quality Requirements.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ELBOW ASSEMBLY, FUEL
Solicitation # SPE4A7-26-R-XA82
This contract is for the procurement of one fuel elbow assembly, identified by NSN 2840-00-326-7511 and part number 6739629. The agreement is a firm fixed price contract with a delivery requirement of 291 days after order. Inspection and acceptance will occur at the origin, and the shipping terms are FOB destination. The supplier must adhere to strict quality and safety standards, including DLA packaging requirements and the prohibition of intentionally added mercury. Quality assurance will be conducted via sampling methods such as MIL-STD-1916 or ASQ H1331. While item unique identification is not required, the item is designated as a critical application item, and all marking and packaging must comply with MIL-STD-129 and MIL-STD-2073-1E.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
COUPLING ASSEMBLY, Q
Solicitation # SPE7MX-26-T-0005
This contract is for the procurement of 38 quick disconnect coupling assemblies under solicitation SPE7MX-26-T-0005 for the Department of Defense Land Supplier Operations SMSG. The items are identified by NSN 4730014563894 and correspond to JLG Industries part numbers 8430050 and 8430083. This is designated as a critical application item with a delivery requirement of 90 days after order, and a final required delivery date of December 31, 2026. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination. The goods must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement and the DLA Master List of Technical and Quality Requirements.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M0-26-T-062E
This contract, identified as SPE7M0-26-T-062E, is a solicitation by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one pipe tee. The item is identified by NSN 4730-01-407-0887 and part number 51800001250075 from Milwaukee Valve Co, Inc. The required delivery date is August 27, 2026, with a delivery timeframe of five days after order. The shipment is designated for delivery FOB Destination to SRF and JRMC Yokosuka in Japan. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirement RP001. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies per requirement RQ011.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M4-26-Q-1003
This contract, identified as SPE7M4-26-Q-1003, is a firm fixed price procurement for six metal pipe assemblies, part number 55782, to be sourced through Hyspan Precision Products Inc. The delivery is required within 186 days after receipt of the order, with a final ship date of January 28, 2027. Inspection and acceptance will occur at the destination, and the items are to be shipped FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and prohibits the use of Class I ozone-depleting chemicals in the production of the items. Technical and quality requirements are governed by the DLA Master List, with the specific revision based on the solicitation or award date. All packaging and palletization must comply with the RP001 requirements for procurement.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
RESTRICTOR, FLUID FL
Solicitation # SPE7M0-26-T-062J
This contract is for the procurement of four units of a fluid restrictor, identified by NSN 4730-99-512-1581. The requirement specifies parts from KNDS Defence UK Limited or Bosch Rexroth Ltd. Delivery is required within five days after the order, with the shipment destined for the W45G18 stock receiving account depot in Texarkana, Texas. The terms specify FOB Origin and require the fastest traceable shipping means, explicitly prohibiting the use of parcel post. Compliance with DLA packaging requirements and MIL-STD-129 for marking and labeling is mandatory, with specific packaging standards set by ASTM D3951. The contract strictly prohibits the use of Class I ozone-depleting chemicals in the delivered items. Technical and quality requirements are governed by the DLA Master List, and the original required delivery date is set for June 29, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
NUT, UNION
Solicitation # SPE7M0-26-T-062B
This contract is for the procurement of 10 union nuts, identified by NSN 4730015091161 and Admiral Valve LLC part number 950N-04-M. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-062B, with a required delivery date of August 27, 2026. Delivery is set for FOB Destination with a delivery window of five days after order. The supplier must adhere to DLA packaging requirements, specifically RP001 and ASTM D3951, while marking and labeling all shipments according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List. The items are to be shipped to the Commander SRF-JRMC Yokosuka Naval Base in Japan, with a strict quantity variance of plus or minus 0 percent.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
BUSHING, PIPE
Solicitation # SPE7M3-26-T-8702
This contract is for the procurement of brass or bronze pipe bushings, specifically identified as NSN 4730-00-202-6493 and part number MS14315-18X. The order consists of 84 packages, with each package containing 10 units. These items are designated as critical application items and must adhere to technical specifications MS14315D and WW-P-460F. The contract strictly prohibits the use of class one ozone depleting chemicals in the manufacturing or delivery of these items. The delivery is set for 71 days after receipt of order, with a required delivery date of December 18, 2026, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements RP001 and marking standard MIL-STD-129 is mandatory. The procurement is conducted under full and open competition by the Department of Defense Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TEE, BOSS
Solicitation # SPE7M2-26-T-6556
This contract, identified as SPE7M2-26-T-6556, is a solicitation for the procurement of 27 units of TEE, BOSS (NSN 4730-00-929-0596) for the Department of Defense Nuclear Reactor Program. The items must be manufactured by an accredited manufacturer or assembly distributor listed in the PRI Qualified Manufacturer List or Qualified Products List. Technical specifications require adherence to SAE AS5192 Revision F and SAE AS4875 Revision B, with a strict prohibition on the use of Class I ozone depleting chemicals and the intentional addition of mercury, except where functionally required. The delivery is set for 167 days after order, with a required delivery date of May 11, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA packaging requirements. This is designated as a critical application item, and the contract mandates specific configuration change management and the removal of government identification from any non-accepted supplies.
NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M1-26-U-5115
Solicitation SPE7M1-26-U-5115 is a Total Small Business Set-Aside Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of pipe plugs. The required items are Vibra-Seal brass pipe plugs with a countersunk hex head, 0.300 inch overall length, and 1/8 inch pipe size, identified by NSN 4730-01-332-6000. The contract has an estimated quantity of 60 units with a guaranteed minimum of 9 units and a maximum contract ceiling of 350,000.00 dollars. Delivery is required within 87 days after receipt of order, with shipping terms designated as FOB Origin for offers and FOB Destination for final delivery. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Inspection and acceptance will occur at the destination. Administrative requirements include electronic submission of payment requests and receiving reports via the Wide Area Workflow system. The solicitation response deadline is August 26, 2026, with submissions managed through the DLA-BSM Internet Bid Board.
MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-8701
This contract is for the procurement of 211 carbon steel pipe tees, specifically internal fittings measuring 1/4 inch x 1/4 inch x 1/8 inch. The items must be manufactured according to SAE J514-3 standards and the provided technical data package. The procurement is conducted under full and open competition by the Department of Defense Fluid Handling Division, with a strict prohibition on the use of Class I ozone depleting chemicals. Delivery is required within 188 days, with a need ship date of March 16, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A5-26-Q-0713
This contract is for the procurement of 11 retaining rings, identified as part number 5156T34P01 by General Electric Company. The item is designated as a Navy Critical Safety Item and a critical application item, requiring strict adherence to quality and technical standards. Delivery is required within 144 days after the order is placed, with the shipping destination being DLA Distribution Cherry Point in North Carolina. The agreement mandates rigorous quality control, including inspection and acceptance at the origin and sampling methods based on MIL-STD-1916 or ASQ H1331. Compliance with SAE AS9100 higher-level quality requirements is required for manufacturers. Packaging and marking must follow MIL-STD-129 and DLA packaging requirements, and any requests for waivers or deviations must be approved by the DSC contracting officer. Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE4A5-26-T-394L
This contract is for the procurement of one packing retainer, identified as NSN 5330014481632 and Boeing part number 90-3328-3016. The item is designated as a critical application item and must be delivered to Tinker AFB within five days of order. The agreement specifies a zero percent quantity variance and requires inspection and acceptance at the destination. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots unless otherwise specified.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-394F
This contract is for the procurement of 30 units of shims, identified by NSN 5365005270413 and part number 507311-5, for the Department of Defense. The delivery is required within 469 days, with a need ship date of December 18, 2027. Shipping is FOB Origin, and the items are to be delivered to Arizona Industries for the Blind in Phoenix, Arizona. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-394V
This contract is for the procurement of one wire rope assembly, identified as a critical application item under NSN 4010-01-673-8174. The order is issued by the Department of Defense through the ASC Supplier Oper OEM Division for delivery to Assault Craft Unit 4 in Virginia Beach, Virginia. The required delivery date is August 20, 2026, with a delivery timeframe of 20 days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract also specifies the use of fastest traceable shipping means and prohibits the use of parcel post.
Other Fabricated Wire Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
INSTALL ASSEMBLY
Solicitation # SPE4A5-26-T-394T
This contract is for the procurement of one Install Assembly, identified by NSN 4920-01-661-7279 and part number 4026AS311-7. The item is classified as a critical application item and must be manufactured according to Technical Data Package Revision A, General 1, based on drawing 30003 4026AS311. Delivery is required within five days after the order, with a required delivery date of August 24, 2026. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA master list requirements, including specific standards for packaging, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The final destination for the shipment is MCAS Futenma in Okinawa, Japan.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
FAN ASSEMBLY 24INCH
Solicitation # SPE4A5-26-T-373D
This contract is for the procurement of one 24-inch fan assembly, identified by NSN 4920-01-573-6284 and Oshkosh Aerotech part number L100006. The solicitation, numbered SPE4A5-26-T-373D, is issued by the Department of Defense ASC Supplier Oper OEM Division. Delivery is required within 171 days after the order, with a target ship date of February 14, 2027, and a final delivery date of March 18, 2027. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and protect covered defense information. Technical and quality requirements are governed by the DLA Master List, and any government identification must be removed from non-accepted supplies.
Machine Shops

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A5-26-T-394G
This contract is a solicitation for the procurement of one ring spacer, identified by NSN 5365007340654 and Hamilton Sundstrand Corporation part number 522151-45. The delivery is required within 20 days after the order, with a required delivery date of August 31, 2026. The item is to be delivered FOB Origin to the Parts-Attach General Depot in Tainan City, Taiwan. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific packaging and marking standards per MIL-STD-129 and RP001. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, and the contract specifies that item unique identification is not required by the service customer.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHACKLE
Solicitation # SPE4A5-26-T-393X
This contract is for the procurement of 101 units of Type IVA, Grade B, Class 3 shackles with a 1/2 inch dimension, identified by NSN 4030016179415. The items must adhere to the technical specifications of RR-C-271H(1) and be delivered to DLA Distribution Jacksonville. The delivery timeline is set for 171 days after order, with an original required delivery date of December 27, 2026, and a need ship date of February 23, 2027. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Shipping is FOB Origin, and inspection and acceptance will occur at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
VIDEO DISPLAY, AIRCR
Solicitation # SPE4A5-26-T-393Z
This contract is for the procurement of three aircraft video display units, identified by NSN 4920015285453 and part number 02-1204-05 from Ultrax Aerospace Inc. The delivery is required within 60 days, with a final required delivery date of August 10, 2026. The items are to be shipped FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, measuring and test equipment, and cybersecurity maturity model certification level 2. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and quality assurance will follow MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and classifies the item as a critical application item.
Machine Shops

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
SENSOR, AMBIENT TEMP
Solicitation # SPE4A5-26-T-375T
DLA Aviation is soliciting quotes for the procurement of 16 ambient temperature sensors under NSN 6685016527045. The approved source for this item is 73030 825312-2, and the goods must be delivered to the DLA Distribution Depot Oklahoma within 115 days after the order is received. This is a total small business set-aside under NAICS code 334512. The solicitation, identified as SPE4A526T375T, is available exclusively via electronic submission through the provided link, as hard copies and technical drawings are not available. Interested and responsible sources must submit their electronic quotes by the deadline of August 26, 2026. All inquiries should be directed to the buyer via the DLA Dibbs portal.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334514
New
DIBBS
METER, FLOW RATE INDICA
Solicitation # SPE4A5-26-T-393W
This contract is for the procurement of 21 flow rate indicating meters, identified by NSN 6680-01-407-9437 and ABB Inc part number 10A2235AXXX41LXXXXLLA1. The acquisition is a total small business set-aside under NAICS code 334514, with delivery required within 171 days after order. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and RP001, with a specific requirement to mark the items as delicate instruments. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SLEEVE, PISTON
Solicitation # SPE4A5-26-T-377C
This contract, identified by solicitation number SPE4A5-26-T-377C, is for the procurement of two piston sleeves, specifically Honeywell International Inc. part number 661879-1 under NSN 2995-00-406-7730. The items are classified as critical application items and are subject to strict technical and quality requirements managed by the Defense Logistics Agency. Compliance with cybersecurity standards is mandatory, specifically requiring a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the contract involves covered defense information. The delivery is scheduled for destination inspection and acceptance at the DLA Distribution Depot Oklahoma located at Tinker AFB, with an anticipated need date of February 12, 2027. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, respectively. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, with defined verification levels for critical, major, and minor attributes. The procurement is managed through the ASC Supplier OEM Division of the Department of Defense.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details