Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GOVERNMENT FIRST ARTIC

Active
SPE7MC-26-T-164MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a linear directional control valve with the NSN 0001S00000052, for a quantity of 23 units, under Purchase Request 7017710330QTY. Delivery is required within 722 days after delivery order issuance, and the solicitation number is SPE7MC-26-T-164M, issued by the Defense Logistics Agency through Depot Hill, with performance location at Hill AFB, Utah. The contracting activity falls under NAICS code 326122 and is classified as a federal procurement. The vendor must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The item involves technical data subject to export control under either ITAR or EAR, and any disclosure or transfer to foreign persons or entities, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program certification, have completed DLA’s required training on handling export-controlled technical data, and have been explicitly approved by DLA to access such data. The contract enforces DFARS 252.225-7048 and mandates CMMC Level 2 certification for any third-party assessment organization involved. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the primary point of contact is Paula Mcclary at fmda3302@dla.mil.

General Info

Procure 23 linear directional control valves, export-controlled, CMMC Level 2, DLA contract, Hill AFB delivery.

Agency

Department Of Defense → DEPOT HILLView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-164M Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT HILL
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT HILL
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,LINEAR,DIRECTIONAL CONTROL
VALVE,LINEAR,DIRECTIONAL CONTROL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 23 EA Purchase Request: 7017710330QTY - See Solicitation Delivery: 722 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M0-26-T-025R
The contract pertains to a single coupling, pipe with National Stock Number 4730-99-551-6649 and a purchase request number 7017688324, requiring delivery of one unit within five days after award. The item must be manufactured and packaged in strict compliance with ASTM D3951 and MIL-STD-129, and all packaging, marking, and labeling must align with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must adhere to DLA’s procurement guidelines including palletization rules, with the unit of issue as a single piece and no variance permitted in quantity. The delivery must be FOB origin and inspected and accepted at the destination. The shipment must be sent via traceable freight methods, excluding parcel post, to the specified freight address in Ronkonkoma, New York, with a required delivery date of July 30, 2026. The item is part of a full and open competition under solicitation SPE7M0-26-T-025R, with technical specifications referenced from a drawing revision dated June 12, 2026, and governed by DoD unit of issue standards. Government-only identifiers are included for tracking and logistics control, and the item is designated for FMS distribution.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, BEAD
Solicitation # SPE7M3-26-T-7805
This contract is for the procurement of one unit of a REDUCER, BEAD with NSN 4730-01-664-8190 under solicitation SPE7M3-26-T-7805, issued by the Department of Defense’s Fluid Handling Division. The item must be delivered within 348 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s specific packaging guidelines. The product must be free of mercury and mercury-containing compounds except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited, and any substitutions require prior approval. The unit of issue is each (EA), and the contractual price is set at $1.00 per unit. The required delivery date is July 28, 2027, with the original response deadline for the solicitation having passed on August 13, 2026. Technical and quality requirements referenced are governed by the DLA Master List version in effect at the time of solicitation issuance.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
BUSHING, PIPE
Solicitation # SPE7M0-26-Q-1140
The contract specifies the procurement of a 3/4 inch NPT male threaded pipe bushing made from Schedule 80 PVC with a 1/4 inch NPT female threaded end and hex wrenching, classified as a commercial off-the-shelf item. It is identified by NSN 4730-01-007-2917 with a quantity of ten units, priced at a firm fixed price with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. Packaging must follow DLA Packaging Requirements for Procurement, including palletization per RP001, and delivery is required at origin FOB within 30 days after award. The unit of issue is each, and the item must be shipped to the designated destination at Yokosuka Naval Base, Japan, with transportation governed by DLA procedural notes C19 and C20. Approved manufacturers include Nibco Inc Chemtrol Division, Cleveland Service Center, George Fischer Sloane Inc, and Lasco Industries, each with specified part numbers. The contract is issued under solicitation SPE7M0-26-Q-1140 with a response deadline in September 2026 and a required delivery date no later than July 8, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-297L
This contract specifies the procurement of a single metallic tube with NSN 4710-01-653-9621 and part number 5284449, supplied by Cummins Inc. or Birdon Pty Ltd, designated as a critical application item. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification language unless alternative chemicals are pre-approved. Delivery is required within 20 days to the DLA Distribution Jacksonville Material Processing Center at Mayport Naval Station, Florida, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped via the fastest traceable means, explicitly excluding parcel post. The contract is issued under solicitation SPE7M4-26-T-297L with a required delivery date of March 6, 2026, and is governed by DLA’s authorized unit of issue and procurement protocols. Government use identifiers are controlled, and removal of government markings from non-accepted supplies is mandatory. All logistics and handling instructions, including palletization and marking, are strictly defined to ensure compliance with DLA packaging and distribution standards.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-7795
This contract is for the procurement of eight hose clamps identified by NSN 4730-01-612-0052 and part number 54235K55 from McMaster-Carr Supply Co, with a unit price of $8.00, totaling $64.00. The items must be delivered within 20 days FOB origin, with no quantity variance permitted, and are subject to inspection and acceptance at the destination. Strict compliance is required with the DLA Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 guidelines, with palletization following DLA procurement standards, and all items must be marked and labeled accordingly. The use of any Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specifications. Shipping must be traceable and cannot utilize parcel post. Delivery is directed to Fort Polk, Louisiana, with the freight and mark-for addresses identical, and the contract includes a required delivery date of July 29, 2026. The solicitation number is SPE7M3-26-T-7795, with a response deadline of August 13, 2026, and it falls under NAICS code 326122. Government use identifiers and reporting codes are embedded for administrative tracking, and primary point of contact is William Cain of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
OUTLET, TUBE
Solicitation # SPE7L3-26-T-144R
The contract is for the procurement of five units of an outlet tube with NSN 4730-01-679-5463 and part number 087382, supplied by SAUER COMPRESSORS USA, INC. The requirement is issued under solicitation SPE7L3-26-T-144R with a firm fixed price and no tolerance for quantity variance—exactly five units must be delivered. Delivery is to be made FOB origin within 65 days of contract award, with an original required delivery date of November 29, 2025, and a need ship date of November 4, 2025. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including preservation methods and unit container specifications, while marking must adhere to MIL-STD-129 with no special labeling required. Palletization follows DLA's RP001 packaging standards. The delivery address is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, which also serves as the freight shipping address. Transportation logistics are governed by DLAD Procurement Notes C19 and C20. The point of contact for inquiries is Amber Rohly, reachable via phone or email through the DLA procurement office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-297D
The contract is for the procurement of three metal pipe assemblies with NSN 4710-01-648-5810 under solicitation SPE7M4-26-T-297D, with a delivery requirement of 202 days after order. The item is subject to strict cybersecurity requirements, including CMMC Level 2 certification for any third-party assessment organization involved, and the handling of covered defense information as defined by DLA policy. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The technical data associated with this item is export-controlled under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including foreign nationals located in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received explicit approval from DLA. The place of performance is Tracy, California, and the contracting office is the Fluid Handling Division of the Department of Defense, with Rory O’Reilly designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, TUBE
Solicitation # SPE7M4-26-T-296P
The contract is for 352 units of a REDUCER, TUBE with NSN 4730-01-646-4046 and part number DPL4011T0806, manufactured by DESIGNED METAL CONNECTIONS INC. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with each unit packed according to the specified Quantity per Unit Pack (QUP) of 001. Delivery is required within 43 days of contract award, to be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA. The required ship date is May 6, 2025, with the original delivery deadline set for June 4, 2025. Transportation procedures must follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-296P, with a unit price of $352.00 and total value of $123,904. The primary point of contact is Michel White, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-7796
The contract is for the procurement of seven ELBOW, PIPE units with NSN/Part Number 4730-01-718-7574 under solicitation SPE7M3-26-T-7796, issued by the Defense Logistics Agency’s Fluid Handling Division under the Department of Defense. Delivery is required within 187 days after contract award, with a response deadline of August 13, 2026, and the technical data associated with this item is subject to strict export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is restricted to contractors authorized under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved the DLA questionnaire, with DFARS 252.225-7048 governing compliance. The solicitation is open to federal contractors, with the place of performance located in New Cumberland, Pennsylvania, and the primary point of contact is William Cain, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M0-26-T-024Y
The contract is for the procurement of one Strainer Element, Sediment, identified by NSN 4730016585252, with a required delivery within five business days after award, by July 30, 2026, to the Distribution Management Office in Albany, Georgia. The item must be supplied in accordance with MIL-STD-129 for marking and labeling, including Data Matrix barcodes, and packaged in compliance with RP001 DLA Packaging Requirements for Procurement and ASTM D3951, although the DLA Master List of Technical and Quality Requirements supersedes ASTM D3951. No ozone-depleting chemicals are permitted, and any substitute chemicals require prior approval unless explicitly authorized by the specifications. The contract is a fixed-price, non-negotiable order with zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must deliver via traceable freight means, prohibiting parcel post, with shipment addressed to the designated military facility. The contract falls under FAR clauses for equal opportunity, combating trafficking, employment eligibility, sustainable products, hazardous material identification, and defense-specific requirements including NIST SP 800-171 assessments and transportation by sea. Payment must be submitted electronically through Wide Area WorkFlow, and invoicing follows government-specific accounting codes tied to the contract award. The contractor must represent its small business status and comply with all socioeconomic and security-related representations, though actual filled-in data is not present. The supplier must also adhere to hazard communication standards, submit hazardous material labels for approval, and ensure all packaging includes correct unit of issue and quantity per unit pack as defined in the contract. The supply must be sourced from approved part numbers and cannot include hexavalent chromium or other prohibited substances under DFARS standards. No evaluation factors or contract options are detailed, and the award is based on automated processes with potential preference for small business categories, though the exact award method remains unspecified.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TEE, BOSS
Solicitation # SPE7M3-26-T-7804
The contract specifies the procurement of five units of part number T00043-5083-2 and its variant T00043-5083-2-SV under solicitation SPE7M3-26-T-7804, with a total value of $25.00 at $5.00 per unit. Delivery is required within 186 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with both inspection and acceptance occurring at destination. The delivery term is FOB origin, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization strictly following DLA Packaging Requirements for Procurement (RP001), and all technical and quality standards referenced by R or I numbers in the DLA Master List take precedence. The Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The NSN 4730017081342 governs the material identification, and the unit of issue is each piece. The original required and needed ship date is February 16, 2027, and all transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contracting office is the Fluid Handling Division within the Department of Defense, with William Cain designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M3-26-T-7799
The contract is for the procurement of eight units of a TEE, TUBE TO BOSS with NSN 4730-01-727-4294 and purchase request number 7017698062, issued under solicitation SPE7M3-26-T-7799 by the Department of Defense’s Fluid Handling Division. The item must be delivered FOB origin within 58 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must strictly comply with MIL-STD-2073-1E, including preservative method 31, dry climate protection, unit container D3, intermediate container E5, and packaging code U, with marking following MIL-STD-129 and no special marking required. Palletization must align with DLA’s packaging requirements. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and the applicable revision is determined by the solicitation issue date. The delivery address is the DLA Distribution San Joaquin warehouse, and the required ship date is October 11, 2026. The unit price is $8.00, totaling $64.00. Contact for inquiries is William Cain at William.Cain2@dla.mil or 614-692-5347.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DEPOT HILL

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-164S
This contract specifies the procurement of a check valve identified by NSN 4820010457684 and part number 1C1006 from CRISSAIR INC, with a requirement for 12 units at a unit price of $12.00, totaling $144. The item is classified as a critical application item with a pressure rating of 3000 PSI and Class 3 threads. Delivery is required within 144 days and must be shipped FOB origin, with inspection and acceptance occurring at the destination. No quantity variance is permitted. Packaging must adhere to ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including labeling in accordance with MIL-STD-129. Palletization must comply with RP001 DLA packaging requirements. The unit of issue is each, and the quantity per unit pack is specified in the contract. The delivery address is the DLA Distribution Depot Hill at Hill Air Force Base, Utah, and transportation logistics must follow DLAD Proc Note C19 and C20. The required ship date is January 5, 2027, with the original delivery due date set for January 20, 2027. The solicitation number is SPE7MC-26-T-164S, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 332911 for other machine shop equipment manufacturing, and the contracting office is the Department of Defense, Depot Hill.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
WINDOW, OBSERVATION
Solicitation # SPE8E5-26-T-3748
The item specified is an observation window with NSN/Part Number 9330-01-131-6571, requested in a quantity of 142 units under Purchase Request 7016937735. Delivery is scheduled for 385 days after order date, with the place of performance located at Hill AFB, Utah, 84056-5734. The solicitation, identified as SPE8E5-26-T-3748, was posted on August 2, 2026, with responses due by August 13, 2026. The contract falls under NAICS code 326199 and is managed by the Department of Defense through the Depot Hill organization, with Khue Nguyen as the primary point of contact. Technical data associated with this item is subject to strict export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, making any disclosure to foreign persons—regardless of location—subject to federal authorization. DFARS 252.225-7048 governs handling, and access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on proper handling of DOD export-controlled data, and have been formally approved by DLA. Distribution is limited to those who have also submitted and been cleared through the DLA Export-Controlled Technical Data Questionnaire, ensuring compliance with defense security protocols.
All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
WINDOW, OBSERVATION
Solicitation # SPE8E5-26-T-3745
The item specified is an observation window with NSN 9330-01-131-6571, with a quantity of 188 units to be delivered 425 days after order date under solicitation SPE8E5-26-T-3745. The procurement is managed by the Department of Defense through Depot Hill, with performance located at Hill AFB, Utah, and the primary point of contact is Khue Nguyen. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 326199. This item is subject to strict export control under either ITAR or EAR, meaning any technical data associated with it may not be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. Access to such data is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this controlled technical data, and compliance is mandatory for all contractors, including those with foreign ownership or subsidiaries.
All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE8E5-26-T-3744
The item specified is an observation window with NSN/Part Number 0001S00000052 and a quantity of 195 units, procured under Purchase Request 7007646211. Delivery is scheduled 425 days after award. The contract is issued under solicitation SPE8E5-26-T-3744 by the Department of Defense through Depot Hill, with performance occurring at Hill AFB, Utah, 84056-5734. This procurement is subject to strict export control requirements under either ITAR or EAR, meaning any technical data associated with the item cannot be disclosed or transferred to foreign persons, whether inside or outside the United States, without prior authorization from the Department of State or Commerce. Disclosure to foreign national employees or foreign subsidiaries of U.S. companies is equally restricted. Compliance requires contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and successfully pass the DLA Export-Controlled Technical Data Questionnaire. Access to the controlled data is granted only to DLA contractors who have received formal approval from the DLA controlling authority. The solicitation was posted August 2, 2026, with responses due by August 13, 2026, and is categorized under NAICS code 326199. Primary point of contact is Khue Nguyen at the DLA, reachable via email or phone as listed.
All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE8E5-26-T-3747
The item specified is an observation window with NSN 0001S00000052, for a quantity of 147 units, under purchase request 7015394808, with a delivery requirement of 425 days after award. This procurement is governed by strict export control regulations due to the presence of technical data subject to either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—constitutes an export requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled technical data is restricted solely to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA authorities. The solicitation, issued by the Department of Defense through Depot Hill, has the identification number SPE8E5-26-T-3747, was posted on August 2, 2026, and requires responses by August 13, 2026. Performance is to be delivered to Hill AFB, Utah, with Khue Nguyen listed as the primary point of contact for inquiries.
All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE CARTRIDGE, CHE
Solicitation # SPE7MC-26-T-164Q
The contract is for a single check valve cartridge with an aluminum body rated for 4,000 PSI and a flow rate of 70 GPM, identified as a critical application item by Pneudraulics Inc. with part number 9389-2R and NSN 4820012008788. It is procured under solicitation SPE7MC-26-T-164Q, issued by the Department of Defense through DLA Distribution Depot Hill, with a required delivery date of April 13, 2027, and a 110-day delivery window. The supplier must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129. The item is to be delivered FOB origin, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. Packaging requires palletization in accordance with DLA requirements, using specific materials and codes, and must include no government identification if non-accepted. Transportation details align with DLA Procurement Notes C19 and C20, and the delivery address is specified as Hill Air Force Base, Utah. The unit of issue is each, with a total price of one unit priced at $1.00, and the contract is categorized under NAICS code 332911.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
DIBBS
Small Business Subcontracting & Accelerated PaymentsThis contract seeks subcontracting services under the NAICS code 541611, specifically targeting small businesses eligible for accelerated payments as outlined in FAR 52.232-40. The opportunity is issued by the Department of Defense through its depot at Hill Air Force Base, with performance location set at Hill AFB, Utah, 84056-5734. The solicitation was posted on July 23, 2026, and requires responses by August 3, 2026. While no specific set-aside classification is designated, the contract emphasizes eligibility for accelerated payment terms, which provide improved cash flow benefits to qualifying small businesses upon invoice submission. Subcontractors must meet small business status requirements and comply with the accelerated payment provisions to qualify for the contract terms. The solicitation can be accessed online through the DIBBS system using the provided link.
Administrative Management and General Management Consulting Services

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 562910
DIBBS
Radioactive Materials Handling (If Applicable)The contract requires handling, labeling, and transporting items that may contain radioactive material in full compliance with DFARS 252.223-7 and applicable Department of Transportation and Nuclear Regulatory Commission regulations. This subcontract is tied to operations at Hill Air Force Base with a ZIP code of 84056-5734 and is classified under NAICS code 562910, which pertains to remediation services. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026, with the contracting entity being the Department of Defense under the agency name DEPOT HILL. All activities must adhere strictly to federal safety, labeling, and transportation standards for radioactive substances, ensuring that personnel, equipment, and the public are protected throughout the handling and transit process.
Remediation Services

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 484220
DIBBS
Domestic & International Freight Logistics (FOB Origin, FDT Program)The contract manages domestic and international freight logistics under FOB Origin and the Defense Logistics Agency’s First Destination Transportation program, requiring the successful bidder to handle the full spectrum of transportation operations from origin point to final destination as defined by DLA guidelines. It includes the potential use of U.S.-flag vessels in compliance with 46 U.S.C. 116, ensuring adherence to maritime preference laws for eligible shipments. The performance location is Hill Air Force Base with a zip code of 84056-5734 and falls under NAICS code 484220 for general freight trucking services, indicating a focus on ground and intermodal transport solutions alongside international shipping requirements. The contract is structured as a subcontract with a response deadline of August 3, 2026, and was posted on July 23, 2026, under the Department of Defense, specifically managed by the Depot Hill office. No set-aside type is specified, meaning the opportunity is open to all qualified vendors without restriction based on business size or socioeconomic status. While no point of contact is listed, the official solicitation can be accessed through the DIBBS portal using the referenced link, and bidders must be prepared to meet the logistical demands of a complex defense supply chain involving both domestic and transoceanic movements with strict regulatory compliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 323111
DIBBS
Military-Compliant Packaging, Preservation & MarkingThe contract requires adherence to MIL-STD-2073-1E for the package and preservation of military supplies, ensuring all items are properly protected and prepared for long-term storage and transport. Labeling must comply with MIL-STD-129, incorporating GS1-compliant barcodes and DataMatrix symbols to guarantee accurate tracking and inventory management throughout the defense supply chain. The work is classified as a subcontract under NAICS code 323111, indicating it involves printing and related support activities. Performance is localized at Hill Air Force Base with the zip code 84056-5734, and the responsible agency is the Department of Defense under the Depot Hill designation. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for qualified vendors to submit proposals.
Commercial Printing (except Screen and Books)

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 541512
DIBBS
Covered Defense Information Safeguarding & NIST SP 800-171 ComplianceThe contract requires the implementation and maintenance of cybersecurity controls to safeguard covered defense information in accordance with NIST Special Publication 800-171 and the Defense Federal Acquisition Regulation Supplement clauses 252.204-7008 and 252.204-7012. These controls are essential to ensure the confidentiality, integrity, and availability of sensitive government data handled by the contractor, with strict adherence to federal standards for protecting controlled unclassified information. Compliance is mandatory and must be continuously monitored and documented throughout the contract period. The agreement is structured as a subcontract under the Department of Defense, specifically managed by Depot Hill, with performance taking place at Hill Air Force Base in Utah, zip code 84056-5734. The action falls under NAICS code 541512, indicating it involves custom computer programming services related to cybersecurity implementation. The solicitation was posted on July 23, 2026, with a firm deadline for responses on August 3, 2026, and all parties are expected to meet the outlined security requirements without exception, ensuring alignment with DoD cybersecurity policy across the supply chain.
Computer Systems Design Services

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 541690
DIBBS
Hazardous Materials Compliance & Safety Data ManagementThe contract calls for comprehensive hazard communication services to ensure full compliance with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 for hazardous materials managed by the Department of Defense. Services include the development and maintenance of safety data sheets, creation and application of label content, and ongoing support to meet federal regulatory standards for chemical safety and workforce protection. All deliverables must align with the specific requirements of Hill Air Force Base, located at 84056-5734, where performance is expected to take place. The work is structured as a subcontract under NAICS code 541690, and proposals must be submitted by August 3, 2026, with the solicitation posted on July 23, 2026. The contract is administered through the Department of Defense’s Defense Logistics Agency system under the solicitation number SPE7MC26T154E.
Other Scientific and Technical Consulting Services

POSTED

10 days ago

DEADLINE

in about 21 hours
View Details