Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HOUSING, LOCK, SAFETY

Active
SPE4A6-26-T-04VQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a housing, lock, and safety item identified by NSN 1440010683839 and part number 11-98449-02-0, classified as a commercial item with no shelf life requirement. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation or award date depending on acquisition size. Mandatory quality procedures include tailored higher-level contract quality requirements, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization and unit of issue follow DLA guidelines, with delivery FOB origin, a 426-day delivery window, and a fixed quantity of 76 units with no tolerance for variance. A separate first article test line item is included, requiring one unit for testing with no separate charge implied unless explicitly stated, and the government retains the right to waive this requirement without financial obligation. The contractor must meet CMMC Level 2 self-assessment standards, and physical identification of the item must be marked as specified. The delivery destination is Hill Air Force Base, Utah, with specific freight and parcel post addresses provided, and the contract is issued under the DoD’s authorized unit of issue system.

General Info

DOD seeks bids for NSN 0001S00000052 via SPE4A6-26-T-04VQ, response due July 16, 2026

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-04VQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
HOUSING,LOCK,SAFETY
HOUSING, LOCK,SAFETY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')

SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A6-26-T-04VQ
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.


RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
CURTISS-WRIGHT CONTROLS, INC. 0AHP5 P/N 11-98449-02-0
YALE INDUSTRIAL PRODUCTS, INC. 18740 P/N SK3810-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017322312 0001 EA 76.000
NSN/MATERIAL:1440010683839
DELIVERY (IN DAYS):0426
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
SPE4A6-26-T-04VQ
SECTION B
PR: 7017322312 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:00/00/0000 Original Required Delivery Date:06/26/2026
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0120
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-26-T-04VQ
SECTION B
PR: PRLI: CONT’D
SPE4A6-26-T-04VQ NSN/Part Number: 1440-01-068-3839 Quantity: 76 EA Purchase Request: 7017322312QTY: 76 Delivery: 426 days ADO

Similar Contracts

NAICS: 336415
New
DIBBS
F00T, EJECTOR, FWThe contract pertains to the procurement of a Forward Ejector Foot, identified by part number 68A733218-1007 and NSN 1440-01-453-4234, with a requirement for four units to be delivered within five days FOB origin. Manufacturing must follow a forging process, necessitating appropriate tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions. Quality assurance is governed by both tailored and non-tailored higher-level requirements, including ISO 9001:2015 for manufacturers and non-manufacturers. Sampling must comply with MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and attributes are to be classified with specific verification levels or AQLs. Physical identification of the item is required per RQ017, though Item Unique Identification is waived by the Service customer under DFARS 252.211-7003. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking, and palletization must meet DLA packaging standards. Measurement and test equipment must be calibrated and documented. The contract is issued under solicitation SPE4A5-26-T-288N with a response deadline of July 22, 2026, and is classified under NAICS code 336415, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
F00T, EJECTOR, FWThe contract pertains to the procurement of a forward ejector foot component, identified by part number 68A733218-1007 and NSN 1440-01-453-4234, with a required quantity of eight units. Production must adhere to a forging process, necessitating specialized tooling, and sourcing inquiries should be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. Quality compliance is governed by referenced technical and quality requirements from the DLA Master List, with manufacturers and non-manufacturers subject to ISO 9001:2015 standards and tailored higher-level quality provisions. Inspection and acceptance occur at origin, with zero tolerance for non-conformances under a zero-based sampling plan per MIL-STD-1916 or comparable standards, and all attributes are to be classified with specific verification levels unless otherwise defined. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA packaging requirements. Unit of issue is each, priced at eight dollars per unit, totaling sixty-four dollars, with delivery due in five days FOB origin and no quantity variance allowed. Item Unique Identification is exempt per customer request, and government identification must be removed from non-accepted supplies. The solicitation number is SPE4A5-26-T-288L, issued under NAICS code 336415, with responses due by July 22, 2026, and primary point of contact is Yvonne Jackson-Dias at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
PRODUCTION LOT TESTINGThe contract requires the contractor to deliver two units of item 11793552 with NSN 0001S00000061 within 60 calendar days for First Article Testing at the Fleet Readiness Center Southeast in Jacksonville, Florida. The government will evaluate these units and provide written approval, conditional approval, or disapproval within 90 days of receipt. The contractor must ensure full compliance with FAR 52.209-4 and its Alternate I, including proper disposition of test units as outlined in the clause. Production Lot Testing follows First Article Approval and involves submitting one randomly selected sample from the production lot for government evaluation. The contractor must notify the Contracting Officer and Quality Assurance Representative at least 14 days in advance of presenting the lot for sample selection and must ship the sample to the same Jacksonville facility using traceable methods with specific labeling and documentation, including DD Forms 1222 and 250, test results, certifications, drawings with proprietary markings, and a prepaid return label. The government testing period for Production Lot Testing is 60 days plus an additional 30 days. The contract explicitly excludes Fast Pay and mandates that the contractor’s pricing for the PLT CLIN covers all costs associated with samples consumed during testing. The delivery deadline for the production quantity is 260 days after contract award, and the solicitation number is SPE4A6-26-T-05TN with a response deadline of July 21, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
FITTING ASSEMBLYThe contract requires the delivery of two units of fitting assembly with NSN 1440-01-179-3552 for first article testing within 60 calendar days of contract award, to be submitted to the Fleet Readiness Center Southeast in Jacksonville, Florida. Government testing is mandatory under FAR 52.209-4 and Alternate I, and the contracting officer must issue written notification of approval, conditional approval, or disapproval within 90 calendar days after receipt of the first article samples. The contractor must provide current dealer or distributor certification and cannot rely on “other equivalent” substitutions without explicit validation. Fast Pay is not applicable. Following first article approval, production lot testing is required, during which one random sample from each production lot must be selected by the Quality Assurance Representative for destructive testing; the contractor must notify the contracting officer and QAR at least 14 days prior to sample submission and must price the production lot testing clause to cover all costs associated with consumed or destroyed samples. All production lot samples must be shipped to the designated test office with specific documentation including signed DD Forms 1222 and 250, test reports, certifications, drawings, and a prepaid return shipping label, and must be clearly marked to prevent stock posting. The delivery schedule for the full production order allows 405 days after delivery order issuance, and all submissions must comply with MIL STD 129 labeling and proprietary marking requirements. The solicitation, issued by the Department of Defense’s ASC Commodities Division, has a response deadline of July 21, 2026, under solicitation number SPE4A6-26-T-05TC.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
PRODUCTION LOT TESTINGThe contractor is required to deliver two units of item 12687966, NSN 0001S00000061, within 14 calendar days of contract award for first article testing at the Fleet Readiness Center Southeast in Jacksonville, Florida. Government testing of these units must be completed within 60 calendar days of receipt, after which the contracting officer will issue written notification of conditional approval, approval, or disapproval. The first article units are not counted toward the production quantity and will be retained by the government for possible use as a manufacturing standard or destroyed during testing. Production lot testing is mandatory following first article approval and must be priced into the contract to cover the cost of samples consumed. The contractor must provide at least 14 days’ written notice before presenting the production lot to the Quality Assurance Representative for sample selection. Two random samples from the production lot will be selected for testing and shipped to the same Jacksonville address with specific labeling, documentation, and return shipping arrangements, including DD Forms 1222 and 250, test reports, certifications, drawings, and a prepaid return label. The government has up to 90 days total for testing after sample receipt, and all shipping must comply with MIL STD 129. The solicitation explicitly excludes fast pay, and the contractor must provide details of current dealer or distributor certification to meet qualification requirements. The contract is governed by FAR 52.209-4 and its Alternate I, with a delivery timeline of 459 days after award and a response deadline for proposals on July 24, 2026.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details