Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE4A6-26-T-14NWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two torque tubes for flaps, identified by NSN/Part Number 0001S00000052, with a delivery requirement of 408 days after award. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to the controlled data is limited to DLA contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from the DLA controlling authority. The solicitation, issued by the Department of Defense’s ASC Commodities Division, has the number SPE4A6-26-T-14NW, was posted on August 9, 2026, and responds by August 17, 2026. The place of performance is in New Cumberland, Pennsylvania, with Bryan Distin designated as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft and aircraft components manufacturing. DLA packaging requirements and physical identification standards for bare items must be met, and the contractor must be certified by a CMMC Level 2 C3PAO to ensure compliance with cybersecurity maturity requirements.

General Info

Procure two torque tubes for flaps, NSN 0001S00000052, delivery in 408 days, ITAR/EAR controlled, CMMC Level 2 certified, DLA requirements apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14NW Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BRYAN DISTIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,TORQUE,ACTUATI
TORQUE TUBE, FLAPS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 2 EA Purchase Request: 7017409002QTY - See Solicitation Delivery: 408 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Aerospace Structural Support Component SupplyThe contract calls for the supply of four structural support components identified by NSN 1560-01-650-4509, specifically for use on U.S. Navy vessels, with strict adherence to MIL-STD-129 standards for packaging and labeling to ensure compatibility with military logistics systems. Delivery of all components must be completed within five days of order issuance to support timely deployment schedules, reflecting the urgent operational nature of the requirement. The components are classified under NAICS code 336413, indicating they relate to aerospace product and part manufacturing, and are procured under a subcontract arrangement by the Aviation Supply Chain ESOC Buys division within the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as FPO with ZIP code 96632, a common designation for military mail addressed to fleet units. The contract is part of a broader defense supply initiative managed through the DLA’s DIBBS platform, and compliance with all technical and logistical specifications is mandatory to meet deployment timelines and operational readiness standards. No specific set-aside or small business preference is indicated, and the procurement is directed toward qualified suppliers capable of rapid fulfillment under exacting military standards.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Strip Wing Manufacturing and SupplyThe contract mandates the manufacture and delivery of one Strip Wing identified by NSN 1560-01-608-2561, requiring full compliance with DLA technical specifications, MIL-STD-129 marking and packaging standards, and origin inspection protocols to ensure readiness for military use. The item must be produced and shipped to Robins AFB, Georgia, with the delivery location specified by the ZIP code 31098-1887, and all work must align with quality and traceability requirements dictated by the Department of Defense. This is a subcontract under NAICS code 336413, posted on August 9, 2026, with responses due by August 17, 2026. The contract is managed by the ASC Commodities Division and is exclusively for fulfillment through the DIBBS platform, where detailed solicitation documents can be accessed. No set-aside status or specific organization type is designated, and while no point of contact is listed, all technical and administrative inquiries must be directed through the provided DIBBS interface.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Side Bleed Air Units (NSN: 1660-01-687-9662)The contract obligates the supplier to manufacture or supply 89 Side Bleed Air units identified by NSN 1660-01-687-9662, ensuring full compliance with all applicable Department of Defense technical standards, military specifications, and quality requirements. These units are critical components for military aerospace systems and must meet stringent performance and durability benchmarks established by the Defense Logistics Agency. The work is to be performed at Tinker Air Force Base, Oklahoma, with the delivery schedule and acceptance criteria governed by contractual obligations tied to military readiness and operational deployment timelines. The solicitation is structured as a subcontract under NAICS code 336413, which classifies the industry as Aircraft and Parts Manufacturing. The proposal must be submitted no later than August 17, 2026, with the request for quotation posted on August 9, 2026, through the DIBBS platform. All bidders are expected to demonstrate proven capability in producing defense-grade components, adherence to quality control protocols, and the capacity to meet the delivery schedule without disruption. Non-compliance with any specified technical or procedural requirement may result in disqualification or contract termination.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1256
The contract under solicitation SPE8ED-26-T-1256 provides for the procurement of 115 units of a shipping and storage container, identified by part number IM2720-00000 and NSN 8145-01-541-0043, at a unit price of $115.000 for a total contract value of $13,225.00. Delivery is required within 64 days of award, with FOB Origin terms, and all shipments must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Packaging and marking must comply with ASTM D3951, but are superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging must be palletized per RP001 DLA Packaging Requirements for Procurement and labeled in strict accordance with MIL-STD-129, including use of 2D barcodes for tracking. The unit of issue and quantity per unit pack must match contract specifications, and government identification must be removed from non-accepted supplies. The item is subject to Covered Defense Information requirements, and compliance with safeguarding standards including NIST SP 800-171 and DFARS 252.204-7012 is mandatory. Hazardous materials, if applicable, must be labeled per 29 CFR 1910.1200 and accompanied by Safety Data Sheets prior to award, with immediate notification required for any changes in material composition. The solicitation is a total small business set-aside under NAICS code 336413, with proposals due by August 20, 2026, and must be submitted through the DLA Internet Bid Board System. Payment will be processed via Wide Area WorkFlow (WAWF), with invoices required to be submitted electronically. Clause 52.244-6 and 252.244-7999 govern subcontracting for commercial products and services, while clauses related to employment eligibility verification, combating human trafficking, and equal opportunity for workers with disabilities are incorporated by reference. The contracting officer’s representative and technical representative details are to be confirmed in the award, as are accounting and payment office information. The contract includes provisions on cybersecurity, information safeguarding, whistleblower rights, and limitations on the acquisition of covered defense telecommunications equipment. No
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract solicitation SPE4A7-26-T-635Q seeks seven units of MMR R-T SLED, AIRCRAFT with NSN 1680-01-522-5949 for delivery to Ghatkopar West, Mumbai, India, under a 20-day ADO timeline with FOB Destination terms. The solicitation mandates strict compliance with military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and RP001 for DLA-specific palletization, with preservation method 10 (CLNG/DRY) and packaging code Q. Physical identification of bare items is required per RQ017, and all items must undergo inspection and acceptance at origin by the Government. Export control requirements under ITAR and EAR apply, restricting technical data disclosure to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and authorization; DFARS 252.225-7048 governs this restriction. The contractor must hold CMMC Level 2 certification and comply with safeguarding measures for covered defense information per DFARS 252.204-7012, including cyber incident reporting. Hazardous materials must be identified with current Safety Data Sheets per 29 CFR 1910.1200 and labeled accordingly. The contractor must be certified to ISO 9001:2015 and adhere to zero non-conformance sampling under MIL-STD-1916 or equivalent. The solicitation requires representation of small business status, HUBZone, WOSB, SDVOSB, or SDB certifications through SAM.gov, and disclosure of UEI and CAGE codes if offering covered defense telecommunications equipment. The contract type remains unspecified pending contracting officer determination but is evaluated on a Lowest Price Technically Acceptable basis with automated award potential. All submissions must be made electronically via the DLA-BSM Internet Bid Board System by August 17, 2026, with invoicing through Wide Area WorkFlow. Payment and oversight details will be finalized in the award document.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract pertains to the procurement of three Wiper Plate Assemblies identified by NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, with a delivery requirement of 103 days after award and FOB origin terms. The item is subject to stringent technical and quality requirements dictated by the DLA Master List of Technical and Quality Requirements, which must be adhered to at the time of solicitation issue or award, depending on acquisition size. Packaging must conform to MIL-STD-2073-1E with preservation Code 10 and no preservation materials, and marking shall follow MIL-STD-129 with physical identification as required by RQ017. The item is also governed by export control regulations under ITAR or EAR, necessitating compliance with DFARS 252.225-7048, where only contractors with approved U.S./Canada Joint Certification Program status, and who have completed required DLA training and questionnaires, may handle the controlled technical data. Inspection and acceptance occur at origin under FAR 52.246-2, requiring the contractor to maintain a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003, with zero non-conformances mandated in sampling inspections. The contract incorporates multiple FAR and DFARS clauses including provisions for cybersecurity safeguarding (252.204-7012), prohibition of hexavalent chromium, prohibition of covered telecommunications equipment, whistleblower protections, and restrictions on mandatory arbitration agreements. Invoicing must be processed exclusively through WAWF, with payment handled via DoDAAC codes and no use of IPP or paper-based methods permitted. The solicitation exhibits characteristics of a Lowest Price Technically Acceptable procurement with pricing as the dominant factor evaluated, though no formal scoring weights are outlined; compliance with technical, regulatory, and delivery requirements is non-negotiable. The estimated contract value is $14,641.53 for the three units, with additional line items in the pricing table indicating broader procurement context, yet only these three units are obligated under this specific award. The contractor must ensure full compliance with environmental, safety, and export regulations, and all representations must be accurate in SAM, with UEI and CAGE codes properly registered. No first article testing is required, and additive manufacturing is prohibited unless
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4211
The contract pertains to SUPPORT, STRUCTURAL items with NSN/Part Number 1560-01-650-4509, for a quantity of four units, under Purchase Request 7017745999, with delivery required within five days after delivery order. The solicitation, numbered SPE4A0-26-T-4211, was posted on August 9, 2026, and responses are due by August 17, 2026. The work is classified under NAICS code 336413 and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance to occur at FPO, ZIP 96632. The contract is subject to stringent export control regulations under ITAR or EAR, meaning technical data associated with the item cannot be disclosed to any foreign person, whether inside or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on DOD export-controlled data, and approved access via the DLA questionnaire may receive the technical information. The primary point of contact for this solicitation is Danita Davis, reachable via email and phone provided.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Freight & Logistics to Camp Lejeune, NCThe contract is for the transportation of packaged goods from origin to Camp Lejeune, North Carolina, operating under FOB origin terms, which means the seller is responsible for delivering the goods to the carrier at the point of origin, and the buyer assumes all responsibility and risk thereafter. All shipments must comply with military shipping documentation requirements and include coordination for final delivery on the base, ensuring seamless integration with Department of Defense logistics protocols. The North American Industry Classification System code 484220 identifies this as a specialty freight trucking service, indicating the need for experienced carriers familiar with secure, regulated military transport procedures. The solicitation is issued as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline of August 17, 2026, and a posting date of August 9, 2026. Performance is specifically required at Camp Lejeune, NC, with zip code 28542, and bidders must be prepared to handle all logistical, procedural, and compliance elements associated with delivering to a military installation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging & Bar-CodingThe contract requires the packaging and bar-coding of fasteners in strict compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly unitized and marked with standardized identifiers for military logistics. This includes precise labeling, bar-code application, and packaging procedures that meet Department of Defense requirements for traceability, durability, and operational readiness. The work is to be performed at Camp Lejeune, North Carolina, with a zip code of 28542, and must be completed by the response deadline of August 17, 2026. It is classified as a subcontract under NAICS code 561910, which pertains to other support services, and is issued by the ASC Commodities Division under the Department of Defense. All deliverables must conform to federal military specifications without exception to ensure seamless integration into the DoD supply chain.
Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation of hazard warning labels and Safety Data Sheets (SDS) aligned with OSHA’s Hazard Communication Standard and MIL-STD-129 specifications for all materials utilized in production or packaging processes. This subcontract is issued by the ASC Commodities Division under the Department of Defense and is targeted at ensuring consistent, accurate, and military-standardized documentation and labeling of hazardous substances. Performance of the work is mandated to occur at Camp Lejeune, North Carolina, with a strict deadline for responses by August 17, 2026, and the solicitation was posted on August 9, 2026. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, emphasizing the specialized nature of compliance documentation development. All deliverables must meet federal safety and labeling requirements to support safe handling, storage, and transportation of materials within military supply chains.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener ManufacturingThe contract seeks a subcontractor to manufacture self-locking nuts that meet exacting technical specifications established by DLA, ASME, and applicable material performance standards. The work must ensure dimensional accuracy, mechanical integrity, and compliance with defense-grade quality controls, as these components are critical for operational reliability in high-stress environments. Production will be performed at the designated place of performance in Camp Lejeune, North Carolina, with all delivered goods required to verify adherence to the mandated engineering and materials criteria. Subcontractors must respond by the deadline of August 17, 2026, and be prepared to support the ASC Commodities Division under the Department of Defense. The NAICS code 332721 identifies the scope as screw, bolt, and nut manufacturing, emphasizing the need for specialized expertise in precision fastener production. While no set-aside criteria are specified, the solicitation is structured as a subcontract, indicating integration into a larger defense supply chain. All bids must demonstrate capacity for consistent, high-volume output with full traceability and documentation to satisfy defense quality assurance protocols.
Precision Turned Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326199
New
DIBBS
Supply of Electrical Insulation Tape (NSN: 5970008221561)The contract requires the supply of 30 rolls of electrical insulation tape, each measuring 108 feet, compliant with military specifications and standardized packaging requirements. Each roll must meet a strict 18-month non-extendable shelf-life condition, ensuring the product remains effective and safe for use from the date of manufacture through delivery and beyond. Delivery is scheduled for Fort Bragg, North Carolina, under FOB Origin terms, meaning the buyer assumes all transportation risks and costs once the goods leave the supplier’s location. The item is identified by NSN 5970008221561 and falls under NAICS code 326199, indicating it is part of a broader category of other plastic product manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, has a response deadline of August 17, 2026, with the posting date set for August 9, 2026, indicating a tight eight-day window for submissions. This is classified as a subcontract, implying it may be part of a larger procurement effort managed by the government or a prime contractor.
All Other Plastics Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 / NIST SP 800-171)
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging & Labeling Compliance (MIL-STD-129)
Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541611
New
DIBBS
Export Control & ITAR/EAR Compliance Support
Administrative Management and General Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) Services
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Precision Sleeve Bushing Manufacturing
Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Hazard CommunicationThe contract requires compliance with DLA standards for packaging and labeling the Strip Wing in accordance with MIL-STD-129, ensuring all markings and documentation meet military specifications for identification and traceability. Hazard communication protocols must be fully adhered to, including proper labeling of hazardous materials and the timely submission of Safety Data Sheets to ensure regulatory and operational safety. The work is scoped as a subcontract under the Department of Defense’s ASC Commodities Division, with performance mandated at Robins AFB, Georgia, 31098-1887. Responses are due by August 17, 2026, following a posting date of August 9, 2026, and the NAICS code 561910 indicates the work falls under Other Support Activities for Transportation. All activities must support defense logistics requirements without set-aside restrictions.
Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details