This Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SLEEVE AND PISTON C

Closed

SPE4A5-26-T-129FFederal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

Manufacturing of Flight-Critical Pivot Supports

Navsup Weapon Systems Support

POSTED

DEADLINE

C-UAS Hardware Prototyping and Fabrication

Office of the Secretary of Defense

POSTED

DEADLINE

Synopsis Wiring Harness , Branched

Solicitation # W58RGZ27QA001

POSTED

DEADLINE

Solicitation # N0038326QLB20

This presolicitation notice from the Department of Defense, specifically the Navsup Weapon Systems Support office in Philadelphia, is for the procurement of two ECS valves. The requirement is identified by NSN 7R-1660-016686580-P8 and reference number 423785-2, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QLB20, was posted on September 11, 2026, and has a response deadline of October 27, 2026. Interested parties should direct inquiries to the primary point of contact, Tia Johnson, via the provided email or phone contact information.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--STEERING UNIT,AIRCR, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSB15

This solicitation, issued by Navsup Weapon Systems Support, seeks a single award for the overhaul, upgrade, repair, and inspection of aircraft steering units (NSN 7RH 1620-01-475-2013). The contractor is responsible for providing all necessary labor, materials, and tooling to return 75 units to a Ready for Issue condition. Key technical requirements include compliance with MIL-STD-130 for markings, the mandatory use of SAE-AS22759 series wire in place of MIL-W-81381, and personnel certification according to IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The contract is a firm-fixed-price effort requiring government source approval prior to award. The government will evaluate proposals based on a trade-off where past performance, assessed via SPRS color-coded risk ratings, is considered more important than price. Quality assurance is strictly managed through requirements for ISO 9001/SAE AS9100 compliance and a calibration system meeting ANSI/NCSL Z540 or ISO-10012-1. Administrative details include the use of Wide Area Workflow for invoicing and a priority DO rating for national defense. The contractor must also adhere to strict packaging standards per MIL-STD-2073-1 and marking requirements per MIL-STD-129.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRPA126RUC24

Solicitation SPRPA1-26-R-UC24 is a request for proposal issued by DLA Aviation at Philadelphia for the procurement of APS Pallets, identified by NSN 1680-01-633-8682. This unrestricted procurement requires the delivery of newly manufactured spares, as refurbished or repaired materials are strictly prohibited. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) color rating scale. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with additional requirements for wood packaging materials to comply with ISPM 15. Inspection and acceptance will occur at the origin, and the contractor must maintain a recognized quality management system such as ISO 9001 or SAE AS9100. Deliveries are designated as FOB Origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS cybersecurity and Buy American regulations.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QA117

Navsup Weapon Systems Support

POSTED

DEADLINE

PANEL, STRUCTURAL, AIRCRAFT / NSN 1560-01-646-5571 / B-52 AIRCRAFT

Solicitation # SPE4A727R0101

POSTED

DEADLINE

Solicitation # 70Z03827QB0000010

Solicitation 70Z03827QB0000010 is a combined synopsis and request for quotation issued by the Department of Homeland Security's Aviation Logistics Center for MH-65 spare parts. The requirement is structured as a total small business set-aside and is anticipated to be awarded on a sole source basis to Airbus Helicopters, Inc. as a firm-fixed price purchase order. The government requires new manufactured commercial items with clear, documented, and auditable traceability to the Original Equipment Manufacturer, Airbus Helicopters France. No substitute or alternate parts will be accepted, and all items must be approved according to Federal Aviation Administration guidelines and include a Certificate of Conformance. The award will be based on the determination of fair and reasonable pricing and the technical ability to provide exact OEM part numbers. The contract includes an option for increased quantity for Line Item 1, allowing the government to increase the quantity by up to twenty units, for a maximum of thirty, by December 31, 2026. Delivery will be made to the USCG Aviation Logistics Center, with inspection and acceptance performed by local USCG Quality Assurance personnel. Quotations and inquiries must be submitted via email to the designated point of contact by October 30, 2026, at 12:00 pm EDT.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

FILTER ELEMENT, FLUID / QPL NSN 1650-00-484-6918 / B-52 AIRCRAFT

Solicitation # SPE4A727R0088

The Department of Defense, through DLA Aviation, intends to establish a five-year Indefinite Quantity Contract for fluid filter elements (NSN 1650-00-484-6918) used in B-52 aircraft. The estimated annual quantity is 1,520 units, with production units designated as FOB Destination and inspection at origin. This item is classified as an Air Force Critical Safety Item and is subject to surge requirements. The procurement is limited to Qualified Products List sources, specifically PTI Technologies and Pall Aeropower, as the government does not possess complete technical data. Other interested contractors must submit a Source Approval Request package for consideration. The solicitation is expected to be issued on November 13, 2026, and may utilize a reverse auction process. All potential awardees must be registered in the System for Award Management.

POSTED

DEADLINE

Solicitation # SPRPA127QYA44

Solicitation SPRPA1-27-Q-YA44 is issued by the DLA Aviation office in Philadelphia under Emergency Acquisition Flexibilities for the overhaul, upgrade, repair, testing, and inspection of one Recovery Sequencer, identified by NSN 1680-99-753-8672 and Part Number MBEU241040. The contractor, identified as Martin-Baker Aircraft Company Limited in the United Kingdom, is responsible for providing all necessary facilities, labor, materials, and tooling to return the item to a Ready For Issue condition in accordance with the latest technical publications. The scope includes strict adherence to configuration management, quality systems meeting ISO 9001/SAE AS9100 standards, and specific protocols for handling items that are Beyond Economical Repair or Missing on Induction. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as more important. Deliveries are required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin using the contractor's equipment. Packaging must comply with MIL-STD-2073 and marking must follow MIL-STD-129, including specific DLR labeling requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with Buy American and specialty metals restrictions. All repairs must be performed at the identified facility in the United Kingdom, and any deviations from approved procedures require formal government acceptance.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply and Certification of Offshore Aviation Safety Gear

Marine Resources

POSTED

about 11 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract solicitation SPE4A5-26-T-129F seeks the procurement of a matched set comprising a sleeve and piston compensator valve, identified by NSN 1420000647716, with a total quantity of 23 units, as well as a first article test requirement for one unit under NSN 0001S00000052. Delivery is FOB origin with no quantity variance permitted, requiring full compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking, including 2D Data Matrix barcoding, though Item Unique Identification is not required. Packaging must adhere to RP001 DLA Packaging Requirements for Procurement, utilizing preservation method 33 (cold/dry), preservation material 49, wrap material GB, unit container D3, and intermediate container E5, with palletization in accordance with DLA standards. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements are governed by the DLA Master List, including source approval documentation (RC001), configuration change management (RQ002), and removal of government identifiers from non-accepted items (RQ011). The contract incorporates FAR clauses for simplified acquisition, contract type deviation, equal opportunity, and radioactive material notice, alongside DFARS requirements for hazardous material labeling and cybersecurity compliance with NIST SP 800-171. Offerors must submit certifications regarding small business status, UEI and CAGE codes, and disclosure of covered defense telecommunications equipment, with proposals submitted electronically via DIBBS by the deadline of May 20, 2026. The award basis is implied to be lowest price technically acceptable, with pricing for the first article test not separately charged unless specified. Payment is processed exclusively through WAWF, and the delivery date is set for 578 days after award, with the destination being Hill AFB, Utah, under the DLA Distribution Depot.

General Info

Procurement of 23 Raytheon valves with strict quality, testing, and delivery to Hill AFB DLA depot.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

RFQ SPE4A5-26-T-129F Request for Quotations May 13 2026

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedMay 12

Solicitation

Notice updatedMay 12

The notice title changed. The notice description changed.

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUSA

Contacts

Rasulbek Kilichev

contact@example.gov

+1 (555) 000-0000

Full Description

SLEEVE AND PISTON C
SLEEVE AND PISTON COMPENSATOR VALVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
SPE4A5-26-T-129F
SECTION B
RAYTHEON COMPANY 54X10 P/N 144-1810
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016753474 0001 EA 23.000
NSN/MATERIAL:1420000647716
DELIVERY (IN DAYS):0578
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT OF ISSUE IS MATCHED SET. MATCHED SET CONSISTS OF COMPENSATOR VALVE PISTON (1) AND COMPENSATOR VALVE SLEEVE (1).
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
SPE4A5-26-T-129F
SECTION B
PR: 7016753474 PRLI: 0001 CONT’D
HILL AFB UT 84056-5734
US
Need Ship Date:08/22/2027 Original Required Delivery Date:11/08/2027
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0000
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A5-26-T-129F NSN/Part Number: 1420-00-064-7716 Quantity: 23 EA Purchase Request: 7016753474QTY: 23 Delivery: 578 days ADO