Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Government First Article Test (GFAT) for NSN 0001S00000052

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution and reporting of a Government First Article Test for the electronic component identified by NSN 0001S00000052, ensuring compliance with Department of Defense standards through dimensional, environmental, and functional testing. The work is subcontracted under a solicitation managed by the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 541380 for other scientific and technical consulting services. The testing must fully validate the component’s conformity to specification prior to production, with results documented and submitted in accordance with DoD protocols. The contract was posted on July 13, 2026, and performance is expected to be carried out under the oversight of the DLA, though specific location details for performance or contact information are not provided. The official reference for the award is linked through the DIBBS system under contract SPE7M526P0452.

General Info

Execute and report First Article Test for NSN 0001S00000052 per DoD standards under DLA oversight.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-25-T-597S.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

59--ELECTRONIC COMPONEN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 13

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Execution and reporting of a Government First Article Test for electronic component (NSN 0001S00000052), including dimensional, environmental, and functional testing per DoD standards.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 14 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 14 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.

Maryland Transit Administration

POSTED

about 16 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 16 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 17 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 17 hours ago

DEADLINE

Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.

City of Virginia Beach

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

DAS Procurement

POSTED

about 18 hours ago

DEADLINE

Environmental Testing & Sampling LaboratoryThis subcontract opportunity is for an Environmental Testing and Sampling Laboratory to provide specialized analysis and sampling services for prime contractors working on New York State Education Department and Office of General Services projects. The selected provider will be responsible for sampling and analyzing suspect materials, specifically focusing on lead-based paint and PCB-containing caulk, to determine if abatement is necessary. The scope of work includes the use of laboratory equipment for the detection of asbestos and PCBs, culminating in the delivery of comprehensive Hazardous Materials Survey Reports. To be eligible, the laboratory must hold certifications that meet all applicable EPA and New York State standards. This procurement falls under NAICS code 541380 and is managed through the NYS OGS Design and Construction agency. Interested parties must submit their responses by the deadline of December 9, 2026.

NYS OGS Design & Construction - Construction Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The scope of work focuses on the dimensional inspection and material verification of units for NSN 5315-01-609-5305, utilizing CMM and calibrated aerospace gauges to ensure compliance with technical data packages. The final deliverables for this project include a comprehensive FAT report and an approved sample. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain JCP certification to ensure full ITAR and EAR compliance. The work is designated under NAICS code 541380 and will be performed at Joint Base Lewis McChord. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 19 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Inspection & Certification

Defense Logistics Agency

POSTED

CLOSED

about 1 year ago

First Article Testing (FAT) Services

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)

Defense Logistics Agency

POSTED

CLOSED

First Article Testing (FAT) Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Production Lot Testing (PLT) Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

First Article Testing (FAT) Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Electronic Component Testing & Quality Assurance Services

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging Services

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

Quality Inspection and Non-Destructive Testing (NDT)

Defense Logistics Agency

POSTED

CLOSED

over 1 year ago

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

First Article Testing (FAT) Services

DLA DIST SAN JOAQUIN

POSTED

CLOSED

Quality Inspection and Certification Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS