Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GOWN, OPERATING, SURG

Active
SPE2DH-26-T-5694Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of adult surgical gowns in X-large, extra-long size with an A-line design, full back, full length, waist tie, long raglan sleeves, and white elastic cuffs, all in blue, sterile, disposable, and fluid-resistant, constructed from plastic polypropylene SMS material meeting AAMI Level 4 standards. Each gown is accompanied by a hand towel, and the unit of issue is a case containing sixteen gowns. The product must have a shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging and technical requirements are governed by DLA standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced under RP001, RA001, and RQ011, which dictate packaging, quality controls, and the removal of government identification from non-accepted supplies. The item is identified by NSN 6532-01-730-7599 with a total quantity of eight cases required under purchase request 7017405710, with delivery due within twenty days after award. The solicitation, issued under SPE2DH-26-T-5694, was posted on August 2, 2026, with responses due by August 10, 2026, and is targeted for performance at Fort Detrick, Maryland, under the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

General Info

Eight cases of blue sterile AAMI Level 4 surgical gowns with hand towels, NSN 6532-01-730-7599, due in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

BLDG 1425 PORTER STREET, FORT DETRICK, MD, 21702-5711, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5694.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GOWN,OPERATING,SURG
SURGICAL PACK, GOWN AND TOWEL
..
ADULT SURGICAL GOWN; X-LARGE; EXTRA-LONG;
A-LINE DESIGN; FULL BACK; FULL LENGTH;
WAIST TIE; LONG SLEEVE; RAGLAN SLEEVE;
WHITE ELASTIC CUFF; COLOR BLUE; STERILE;
DISPOSABLE; FLUID RESISTANT; PLASTIC
POLYPROPYLENE (SMS); AAMI LEVEL 4;
INCLUDES HAND TOWEL.
..
UNIT OF ISSUE: CASE (CS) OF 16 EACH
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE
ELAPSED FROM DATE OF MANUFACTURE TO
DATE OF DELIVERY TO THE GOVERNMENT.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6532-01-730-7599 Quantity: 8 CS Purchase Request: 7017405710QTY: 8 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
CASSETTE, FILTER
Solicitation # SPE2DH-26-T-5704
The contract is for a single unit of a cassette filter with a 5.0 micron rating, 25mm disk size, identified by NSN 6640-01-492-5120, under solicitation SPE2DH-26-T-5704. The item must be supplied in compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage during transit. Shipments must be placed in commercial exterior containers capable of safe delivery via common carrier at the lowest cost to the designated delivery point in Tampa, Florida. Bidders are required to specify the source and part number being offered, and all items must be marked in accordance with the Medical Marking Standard. The contract includes provisions for the removal of government identification from non-accepted supplies and potential application of covered defense information standards. Delivery is required within five days of award, and responses are due by August 10, 2026. The purchasing office is part of the Department of Defense, Medical Supply Chain FSH, with point of contact Tina Vu available for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BUFFER SOLUTION, STA
Solicitation # SPE2DH-26-T-5688
The contract specifies the procurement of 30 packets of buffer solution powder, comprising 15 red packets for pH 4.01 and 15 yellow packets for pH 7.00, packaged in plastic cases for medical use. Each unit must be sealed in a suitable container to prevent damage or breakage and shipped in commercial exterior containers that ensure safe delivery at the lowest cost to the designated point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number. The item has a non-extendable shelf life of 24 months, and no more than three months may have passed from manufacture to government delivery. The NSN is 6630-01-494-3676, and the contract number is SPE2DH-26-T-5688, with a 20-day delivery requirement. Bidders must provide the source and part number being supplied, and the procurement falls under DLA packaging and quality requirements, including compliance with the DLA Master List of Technical and Quality Requirements. Covered defense information may apply, and government identification must be removed from non-accepted supplies as per applicable standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATOR
Solicitation # SPE2DS-26-T-298B
The contract pertains to the procurement of a 1-liter test lung device designed for use with all Impact and Zoll ventilator series 731 and 754M models, serving as a critical component in ventilator calibration and functionality verification. This item is listed under NSN 6515-01-608-7696 and is included within the broader Ventilator Calibration Kit identified by NSN 6515-01-606-1476, with a unit of issue specified as each. The procurement is governed by DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, where compliance is determined by the revision in effect on either the solicitation issue date or award date, depending on acquisition type. Bidders must clearly identify the source and part number being offered and adhere to the requirement that government identification be removed from non-accepted supplies. The solicitation, identified as SPE2DS-26-T-298B, was posted on August 2, 2026, with a response deadline of August 10, 2026, and is classified under NAICS code 339113 for medical equipment manufacturing. The contracting organization is the Department of Defense, specifically under the Medical Supply Chain MD Surg FSF, with a single point of contact provided for inquiries: Aidan Martz. Delivery is required within 20 days after delivery order issuance, and the purchase request number is 7017693318 for a single unit. The contract falls under a federal procurement pathway with no set-aside specified, and all bids must meet the technical, quality, and administrative criteria outlined in the associated DLA directives.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-300J
The contract pertains to the procurement of five nonpneumatic ratcheting tourniquets, model TX3, in olive drab green, each identified by NSN 6515-01-667-6208, with a delivery requirement of five days after order award. The solicitation, issued under number SPE2DS-26-T-300J, was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD SURG FSF. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Fort Lewis, Washington, with Dorothy Marquis listed as the primary point of contact. The NAICS code 339113 classifies this as medical equipment manufacturing, and the procurement is open under federal contracting procedures.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SHAVING KIT, HOSPITAL P
Solicitation # SPE2DH-26-T-5732
The contract is for the procurement of hospital patient shaving kits, each containing one disposable razor and one tube of shaving cream, packaged in units of 25 kits per pack (PG). The kits are intended for patient personal care in hospital settings and must comply with DLA’s packaging and marking standards, specifically Medical Marking Standard No. 1, which replaces MIL-STD-129. Each kit must be sealed in a protective unit container and packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated destination. The items are identified by NSN 6530-01-354-1156 and manufacturer part number DYKD2001S from MEDLINE INDUSTRIES, LP. Delivery is required within five days FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The contract is subject to DLA’s technical and quality requirements referenced from the Master List, and all material must be marked and packaged in accordance with specified defense and medical standards. The solicitation number is SPE2DH-26-T-5732, with a response deadline of August 10, 2026, and the place of performance is Travis AFB, CA. The federal agency managing the acquisition is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-294Z
The contract specifies the procurement of sterile adhesive skin closure strips measuring 0.25 by 3 inches, supplied in packs of 150 strips total, with each envelope containing three strips and fifty envelopes per box. The strips are available with two alternate backings: polypropylene film or nonwoven nylon fabric, both porous and designed for surgical use. The product must have a non-extendable shelf life of exactly 36 months, and no more than five months may have elapsed between the date of manufacture and the date of delivery to the government. All labeling must conform to the latest revision of Medical Marking Standard No. 1, including the date of manufacture, expiration or retest date, and contract or lot number. Packaging must meet commercial standards with each unit sealed in a protective container and shipped in suitable exterior shipping containers to ensure safe, cost-effective delivery to Davis Monthan AFB, Arizona. The item is identified by NSN 6510-00-913-5874, with a quantity of five packs required under solicitation SPE2DS-26-T-294Z, and delivery must be completed within 20 days of award. Bidders must provide the source and part number being offered, and the acquisition is subject to all applicable DLA technical and quality requirements listed in the DLA Master List, with compliance enforced under Federal procurement guidelines.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-296E
The contract is for the procurement of two rigid sea-air medical evacuation litters, identified by NSN 6530-01-187-0104, with a required delivery within 20 days of award. Each litter measures 80 inches in length and 16.5 inches in width, featuring a stainless steel or corrosion-resistant metal frame with a cloth stretcher and an urethane-coated carrying case. The design allows the litter to be folded in half, hoisted vertically or horizontally, backpacked, and carried without the use of hands, making it suitable for transport into confined spaces. The unit is orange in color and must meet stringent material specifications, including the prohibition of intentional introduction of mercury or mercury-containing compounds, except for approved exceptions such as functional components in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List, with the applicable revision determined by the solicitation or award date. Bidders must provide the source and part number being offered, and the contract is issued under solicitation SPE2DS-26-T-296E by the Department of Defense’s Medical Supply Chain, with performance located in Jacksonville and a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-296Y
The contract calls for the procurement of sterile, hypoallergenic adhesive bandages, specifically TELFA ISLAND DRESSINGS, measuring 4 inches by 4 inches, supplied in white and packaged in eight boxes of twenty-five bandages each, totaling two hundred units per package. The item is identified by NSN 6510-01-171-9722 with a single purchase request and a required delivery within twenty days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all supplies must be free of government identification if not accepted. The solicitation, issued under SPE2DS-26-T-296Y, requires bidders to clearly state the source and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain, with performance located at Fort Bragg, North Carolina. The solicitation opened on August 2, 2026, and responses are due by August 10, 2026, with a primary point of contact provided for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
FUNNEL, COMMON, LABORATO
Solicitation # SPE2DS-26-T-299G
The contract specifies the procurement of two plastic laboratory funnels with a 58mm diameter, intended for use with Taylor phosphate and nitrate test kits. The item is identified by NSN 6640-00-165-5851 and is to be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE2DS-26-T-299G, issued on August 2, 2026, with responses due by August 10, 2026. The contracting office is under the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance occurring at FPO 09520. The primary point of contact is Olusola Emmanuel, reachable via email and phone as listed. The NAICS code 339113 classifies this as manufacturing of medical and dental instruments and supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, IONTOPHORETI
Solicitation # SPE2DS-26-T-299P
The device is an iontophoretic drug delivery electrode with a rechargeable lithium-ion battery rated at 3.7 volts nominal and 230 milliamp-hour capacity, designed to deliver drug doses ranging from 0 to 40 milliamp-minutes with a total controller capacity of approximately 200 milliamp-minutes when fully charged. It operates with a maximum voltage of 70 volts direct current and a maximum current limit of 4 milliamperes. The device is not rated for water resistance (IPX0) and must not be used in environments containing flammable gases, liquids, or materials. It is classified under product device code 18155 and sold as a single unit. The item is identified by NSN 6515-01-674-1416 with a purchase quantity of 4 units, solicited under contract SPE2DS-26-T-299P with a response deadline of August 10, 2026. Delivery is required within five days after order award, and the place of performance is designated as FPO with a ZIP code of 96615. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA procurement standards. Government identification must be removed from non-accepted supplies, and the acquisition falls under NAICS code 339113 administered by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
FILE, ENDODONTIC, HAND
Solicitation # SPE2DH-26-T-5706
These endodontic hand files are precision dental instruments with a square cross-sectional design, optimized for root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, they are engineered for durability, resistance to fracture, and high cutting efficiency, ensuring reliable performance during clinical use. The instruments feature color-coded plastic handles with grooves and an ergonomic shape to enhance tactile feedback and provide a secure, comfortable grip for dental professionals. Each unit is packaged as a set of six, with the specified NSN 6520-01-718-4102 and a quantity of four packages required under purchase request 7017638333. A shelf-life restriction of 12 months applies and is non-extendable, with packaging and supply requirements governed by DLA standards including the removal of government identification from non-accepted items. The solicitation, issued by the Department of Defense under contract SPE2DH-26-T-5706, mandates supplier information including source and part number, with bids due by August 10, 2026, and delivery required within five days of award to Suffolk, Virginia. The items are subject to defense information protocols and technical quality standards as referenced in the DLA Master List.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SURGICAL PACK, DISPOSAB
Solicitation # SPE2DH-26-T-5695
The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339920
New
DIBBS
FILTER SET, RADIOGRAPHI
Solicitation # SPE2DH-26-T-5711
The contract specifies the procurement of one filter set for radiographic use, part number 9703045-00, supplied by RTI Electronics, Inc. with CAGE code 46PM4, under the NSN 6525-01-606-9939. The item is intended for medical applications and must comply with stringent packaging and marking requirements outlined in Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Each unit must be sealed in a protective container to prevent damage during transit and packed within commercial shipping containers suitable for safe and cost-effective delivery via common carrier to the destination point. Packaging must adhere to DLA’s procurement requirements and the specified commercial standards for medical acquisitions, with no use of military packaging standards unless explicitly overridden. Delivery is required within 20 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The contract references technical and quality requirements from the DLA Master List, and the item is subject to provisions regarding covered defense information. The solicitation number is SPE2DH-26-T-5711, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The point of contact for inquiries is Tina Vu with the Medical Supply Chain FSH.
Sporting and Athletic Goods Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
ANALYZER, BLOOD CHOLEST
Solicitation # SPE2DH-26-T-5680
The contract is for the procurement of four kits of the Accutrend Plus blood cholesterol analyzer, a portable, lightweight device designed for reliable cholesterol testing without the need for fasting, refrigeration, or capillary tubes. The meter features a larger, easy-to-read display, ergonomic design for convenient handling, built-in self-testing and safety features that reduce contamination risk by allowing blood application outside the device, and operational capability in ambient temperatures between 64°F and 95°F, making it suitable for both clinical and field use. Each kit includes the meter, user manual, reference card, troubleshooting guide, four AAA batteries, and a protective case. The product is commercial off-the-shelf medical equipment, packaged and marked in compliance with Medical Marking Standard No. 1, superseding MIL-STD-129, and shipped in commercial containers ensuring safe delivery at the lowest freight cost to Fort Hood, Texas, with a 20-day delivery requirement. The acquisition is conducted under solicitation SPE2DH-26-T-5680 issued by the Department of Defense’s Medical Supply Chain FSH, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and packaging standards enforced per RP001 and RQ011. The NSN 6630-01-689-9343 identifies the item, and the contract fall under NAICS code 334510 for medical equipment manufacturing. All supplies must be free of government identification if not accepted, and the point of contact for inquiries is Tina Vu, with full documentation available through the DLA eProcurement portal. The solicitation closed on August 10, 2026, and the purchase request is numbered 7017684185, with delivery specified for ADO.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334515
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5687
The contract specifies the procurement of Monochloramine Reagent Powder Pillows, identified by NSN 6630-01-606-5361, with a unit of issue being a package containing 100 pills per pallet. The item is classified as a Type I hazardous material with a non-extendable shelf life of 12 months, requiring that no more than two months have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must strictly adhere to MMS1D standards, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number. Compliance with hazardous materials regulations under 49 CFR and ICAO standards is mandatory, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The item is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation, issued under SPE2DH-26-T-5687, has a response deadline of August 10, 2026, and requires delivery within 20 days of award, with the placing organization being the Department of Defense’s Medical Supply Chain FSH.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5723
The contract specifies the procurement of 15 sheets of a non-latex rubber dam measuring 6 x 6 inches, identified by the NSN 6520-01-717-7806, with a teal green color and regular medium thickness, packaged as a single unit of issue. The item is intended for medical use and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being submitted. The solicitation, issued under SPE2DH-26-T-5723 on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with performance delivery to APO 09094-3219 within 20 days of award. Primary point of contact is Tina Vu via email and phone provided. Covered defense information may apply, and the NAICS code 339114 denotes classification under dental and orthopedic appliances manufacturing.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
ROOT CANAL PREPARATION
Solicitation # SPE2DH-26-T-5699
This contract pertains to the procurement of a Root Canal Preparation Syringe Kit, which includes five 3cc syringes and fifty application tips, formulated with a specialized water-soluble base containing glycol, urea peroxide, and EDTA to effectively remove calcifications and lubricate root canals for improved instrumentation efficiency. Each kit is the unit of issue, and the item is identified by NSN 6520-01-674-0176 with a procurement quantity of four kits. The item has a non-extendable shelf life of 24 months and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identification codes RS016, RA001, RD003, RP001, and RQ011. Hazardous materials regulations apply, requiring a current Material Safety Data Sheet (MSDS) to be submitted electronically to DLA.MSDS@DLA.MIL with cover sheet P-75 and to physically accompany each shipment, packaged in accordance with SPE2DH-26-T-5699, 49 CFR, and ICAO standards. The solicitation issued on August 2, 2026, with a response deadline of August 10, 2026, is under the NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain FSH office, with performance delivery required in Suffolk, Virginia, within five days of award, and primary point of contact is Tina Vu.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TABLE, SURGICAL INST
Solicitation # SPE2DH-26-T-5733
The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
DENTAL INSTRUMENT KIT,
Solicitation # SPE2DH-26-T-5728
This contract is for the procurement of a sterile, single-use, disposable dental operative kit containing three essential instruments: a rigid spatula No. 324, a Woodson No. 2 plunger, and an interproximal carver. The kit is intended for use by independent medical or dental healthcare professionals in austere environments such as at sea or remote assignments, where access to conventional dental facilities is limited. The unit of issue is the complete kit, and the order quantity is 2,000 units with a delivery requirement within 20 days after award. The supply is identified by NSN 6520-01-701-5743 under purchase request 7017699396. The solicitation mandates strict compliance with Department of Defense technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issuance or award date. Packaging must adhere to DLA requirements, and all supplies must be free from government identification if not accepted. The contract prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with limited exceptions for mercury in batteries, fluorescent lamps, sensors, weapon systems, and specific chemical reagents; any permitted mercury-containing portable lamps or instruments must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Bidders must provide the source and part number of the product being offered. The solicitation,编号 SPE2DH-26-T-5728, was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through Tina Vu at dla.mil.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details