Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Grain Storage Bin Supply and Installation

Active

State & Local

Response Deadline07/30/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Texas A&M AgriLife Research is soliciting a subcontract for the supply, delivery, and erection of a 20,172-bushel metal grain storage bin, requiring full structural assembly and secure anchoring to a designated foundation. The contract is open for responses through July 30, 2026, with a posted date of July 9, 2026, and falls under NAICS code 332311, indicating it pertains to metal grain bin and silo manufacturing. The place of performance and specific location details are not provided, but the work is expected to be completed at a site managed by Texas A&M AgriLife Research in Texas. All bids must meet technical requirements for fabrication, transportation, and installation, with the contractor responsible for ensuring the bin is properly assembled and anchored to meet structural and safety standards. The solicitation is issued through the Texas SmartBuy platform and no set-aside provisions are designated, making it open to qualified submissions from general contractors and manufacturers.

General Info

Texas A&M AgriLife Research seeks 20,172-bushel metal grain bin supply, delivery, and installation by July 30, 2026.

Agency

Texas A&M AgriLife Research

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 9

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 09:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas A&M AgriLife Research

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas A&M AgriLife Research

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, delivery, and erection of a 20,172-bushel metal grain storage bin, including structural assembly and anchoring to the foundation.

Similar Contracts

Same NAICS industry code

Roll-Up and Personnel Doors with High-Security LocksThe contract entails the supply and installation of four insulated roll-up doors and steel personnel doors equipped with high-security locks, primarily for use at a military facility in Higashimatsushima with postal code 981-0503. The work falls under NAICS code 332311, indicating the scope is focused on metal door and door frame manufacturing and installation, with an emphasis on durability and security compliance. All components must meet stringent performance standards to ensure resistance to forced entry and environmental wear, reflecting the Department of Defense’s operational requirements for the site. Delivery, installation, and commissioning are to be completed in accordance with specified technical and safety protocols, with the contractor responsible for ensuring full compliance with military-grade security specifications. The solicitation was posted on July 25, 2026, and responses are due by August 7, 2026, at 02:00 UTC. This is classified as a subcontract opportunity under the Department of Defense, specifically managed by the FA5025 356 Eceg Pk office, and there is no set-aside designation specified for small businesses or other categories. The place of performance is clearly identified, but no point of contact information is provided, and the office address lacks specific details beyond the location in Japan. All work must be completed within the deadline, and successful bidders are expected to adhere to all federal procurement requirements and defense facility access standards.

FA5025 356 Eceg Pk

POSTED

DEADLINE

Structural Support Component FabricationThe contract calls for the fabrication of custom load-bearing brackets, frames, or structural supports designed specifically for vehicular assemblies, to be manufactured strictly in accordance with provided engineering drawings. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to compete, and the NAICS code 332311 confirms the work falls under metal fabrication for structural components. The solicitation was posted on July 25, 2026, with a firm response deadline of July 28, 2026, at 6:00 PM, leaving a narrow window for submissions. The contracting activity is managed by DLA Maritime - Pearl Harbor under the Department of Defense, and while the precise location for performance is not listed, the work is intended to support military vehicular systems. No point of contact is provided, and bidders must rely on the SAM.gov link for further details and submission requirements.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Structural Panel Supply (NSN: 1560-01-196-4395)The contract involves the supply of structural panels identified by NSN 1560-01-196-4395, requiring full compliance with military specifications. All items must include traceability documentation, condition certification, and IUID marking to ensure proper identification and accountability. Panels may be sourced as new, reconditioned, or government surplus, but each must meet the required performance and quality standards regardless of condition. The work is classified as a subcontract under NAICS code 332311, and the solicitation is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 24, 2026, with a response deadline of August 7, 2026. The place of performance and office address details are not specified, indicating flexibility in logistics or reliance on standard government procurement channels. Bidders must ensure full adherence to all military standards for documentation, marking, and condition verification, with no allowances for noncompliant items. The procurement is conducted through the DIBBS system, and interested parties must access the official link to submit proposals and review full requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Specialty or High-Strength FastenersHarris County is seeking suppliers to provide specialty fasteners including high-tensile, stainless steel, corrosion-resistant, and custom-threaded components for use in infrastructure and public works projects. The opportunity is structured as a subcontract with a response deadline of August 24, 2026, and was posted on July 24, 2026, with no solicitation number assigned. The North American Industry Classification System code 332311 applies, indicating the focus is on forging and stamping operations related to fastener manufacturing. The place of performance and detailed office address are not specified, suggesting the work may be required across various county locations or projects. There is no set-aside designation indicated, meaning the contract is open to all qualified vendors without preference given to small businesses or other categories. Interested parties must submit responses through the designated online portal by the stated deadline.

POSTED

DEADLINE

Supply of Replacement Aluminum FiltersThe contract calls for the supply of fifty replacement aluminum filters designed to be compatible with specific Broan-Nutone or equivalent range hood models, ensuring seamless integration and functional performance in existing ventilation systems. The requirement is issued under a subcontract arrangement by the Navsup Flc Sigonella Naples Office, a unit within the Department of Defense, and is intended for performance at the Rota location with a postal code of 11520. The North American Industry Classification System code 332311 indicates the contractor must operate within the appliance manufacturing sector, specializing in parts and components that meet precise technical specifications. Responses to this solicitation must be submitted by August 7, 2026, at 8:00 AM, with the opportunity posted on July 24, 2026. No set-aside designation is specified, meaning all eligible businesses may compete. The filters must meet exact compatibility standards with Broan-Nutone or functionally equivalent range hoods, implying rigorous adherence to dimensional, material, and performance criteria. While no point of contact is listed, interested parties can access additional details via the provided SAM.gov link, and all deliveries are expected to fulfill the operational needs of the defense facility in Rota without disruption to existing systems.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

CRES 316 Retaining Rings and Control Rods SupplyThe contract calls for the supply of corrosion-resistant steel 316 hardware, specifically retaining rings and control rods, with full traceability ensured throughout manufacturing and delivery. All items must meet stringent material and quality standards, with documentation verifying the origin, processing, and testing of each component to guarantee performance in demanding environments. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, in alignment with SBA and FAR 19.5 regulations. The NAICS code 332311 confirms the scope falls under forgings and stampings manufacturing, indicating the need for precision fabrication capabilities. The solicitation was posted on July 24, 2026, with responses due by July 31, 2026, at 7:00 PM, leaving a limited window for qualified small businesses to submit proposals. The contracting activity originates from the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, indicating the hardware will support critical defense or naval systems. While specific delivery locations and point of contact details are not provided, performance is expected to align with military-grade reliability standards. Bidders must demonstrate not only technical compliance but also the ability to maintain complete material traceability, a non-negotiable requirement for this procurement.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Material Supply – Metal ComponentsThe contract titled Material Supply – Metal Components is a small business set-aside subcontract issued by the Department of Defense under the FA4887 56 Cons Cc agency, specifically targeting total small business participation as defined by the SBA under FAR 19.5. It seeks the supply of replacement steel or aluminum components including beams, brackets, and fasteners required for the repair of sunshade systems, with performance required at Luke Air Force Base in Arizona, 85309. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 6:00 PM Eastern Time. The North American Industry Classification System code assigned to this procurement is 332311, indicating it falls under the manufacturing of fabricated metal product manufacturing, specifically architectural and structural metals manufacturing. All suppliers must be certified small businesses eligible to compete in a total small business set-aside and are expected to deliver components that meet exacting technical and quality standards suitable for military-grade infrastructure maintenance.

FA4887 56 Cons Cc

POSTED

DEADLINE

15 MXS Mezzanine CabinetThis solicitation, identified as FA521526Q0014 and titled “15 MXS Mezzanine Cabinet,” seeks a custom two-tier modular storage cabinet system with mezzanine access for the 15MxS Propulsion flight tool room at Joint Base Pearl Harbor Hickam, Hawaii. The system must include stackable cabinets and drawers with locking doors to securely store equipment, tools, Due In For Maintenance parts, and hazardous materials, all arranged to maximize vertical space. The total system must measure 37 feet 6 inches in width, with a cabinet bank width of 32 feet 6 inches and an overall height of approximately 9 feet 10.255 inches, featuring a mezzanine platform at 4 feet 11.13 inches. The walkway across the top must be a metal grated surface with full-length guardrails and multiple support posts for stability, and access must be provided via a staircase on the right side with safety railings. All components—including stairs, walkways, and cabinets—must be finished in a uniform blue color. The design and specifications are detailed in Attachment FA521526Q0014 - Item Description, which was updated to resolve inconsistencies. The procurement is a 100% Small Business set-aside under FAR 19.5, with a NAICS code of 332311 and a size standard of 750 employees. All responses must come from small businesses capable of meeting the technical requirements, and vendors must include their CAGE code, UEI, company information, past performance, and relevant experience in their submissions. Quotes must be submitted via email to 1st Lt Kasarah Hernandez and A1C Franz Yap no later than 2:00 PM Hawaii Standard Time on July 27, 2026, with all proposals in PDF or Word format. The government has not assumed any financial obligation, as funds are not presently available under RFO clause 52.232-18, and all quotes must remain valid through September 30, 2026. Delivery is FOB destination, and the contractor is responsible for both delivery and installation at Joint Base Pearl Harbor Hickam, HI 96853. Proprietary information must be clearly marked and segregated, and submissions are to be provided at no cost to the government. The solicitation was posted on July 24

FA5215 766 Ess Pkp

POSTED

DEADLINE

Metal Panels and Structural Components SupplyThe contract pertains to the supply of metal panels and fabricated structural components, requiring strict adherence to contract-compliant packaging, preservation, labeling, and storage protocols to ensure the integrity of materials during transport and handling. All deliverables must be engineered and constructed to meet specified technical and quality standards, with particular attention to preventing damage under a range of environmental and logistical conditions. The work is classified under NAICS code 332311 and is structured as a subcontract, with performance location designated across various sites without a specific city or state limitation, indicating potential nationwide or multi-site deployment. The solicitation was posted on July 24, 2026, with a firm deadline of August 12, 2026, at 6:00 p.m. for responses, and is managed by the DTMB agency under its Michigan operational unit. While no set-aside type or point of contact is specified, bidders must ensure full compliance with all contractual requirements regarding documentation, delivery timelines, and material specifications. Access to the official solicitation portal is available through the provided Michigan state government URL, and interested parties are expected to review all technical and procedural conditions prior to submission.

POSTED

DEADLINE

Mounting Plate Manufacturing and SupplyThe contract calls for the manufacture and supply of a precision metal mounting plate identified by NSN 2040017163573, engineered to meet stringent military specifications covering performance, durability, and environmental resilience. The product must adhere to all applicable defense standards for materials, finishes, and dimensional tolerances, ensuring compatibility with military systems and operational readiness under extreme conditions. Packaging and labeling requirements are defined to support secure transportation, long-term storage, and inventory management within the Department of Defense supply chain. The solicitation is issued as a subcontract under the NAICS code 332311, targeting specialized metalworking manufacturers capable of fulfilling exacting military-grade production demands. Responses are due by August 3, 2026, with performance expected to be delivered to the designated location in New Cumberland, Pennsylvania, 17070-5002. The contract is managed by the Fluid Handling Division of the Department of Defense, with no set-aside provisions indicated, making it open to eligible contractors regardless of business size or status. All submissions must be submitted through the official DIBBS portal prior to the deadline to be considered.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Corrosion-Resistant Steel Tube Assembly ManufacturingThe contract requires the manufacture of corrosion-resistant steel tube assemblies according to Drawing 12300425, encompassing all necessary fabrication processes such as welding and forming, along with comprehensive inspection procedures to ensure product integrity. All work must comply strictly with DLA quality standards, ensuring the final assemblies meet rigorous military-grade specifications for performance and durability in demanding environments. The project is classified as a subcontract under NAICS code 332311, with performance located at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Fluid Handling Division within the Department of Defense. While no set-aside designation is specified, the contract is open to qualified subcontractors capable of fulfilling the technical and quality requirements outlined in the drawing and DLA protocols. Interested parties must submit bids through the designated DIBBS platform using the provided RFQ link to meet the timeline and procedural requirements for consideration.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Metal Fabrication of Loop ClampsThe contract calls for the manufacture of 72 military-grade loop clamps using precision metal fabrication techniques, adhering strictly to defense specifications for material sourcing, machining, finishing, and quality inspection. Each component must meet exacting military standards for durability, performance, and reliability under operational conditions, with all work performed to ensure full compliance with applicable defense requirements. The production process involves multiple stages including fabrication, CNC machining, surface treatment, and rigorous inspection protocols to validate conformity and functionality. Performance of this subcontract is designated for New Cumberland, Pennsylvania, with a final response deadline of August 3, 2026. The solicitation falls under NAICS code 332311, categorizing it within the forging and Stamping industry, and is managed by the Fluid Handling Division under the Department of Defense. While no set-aside provisions or point of contact details are provided, the contract is publicly accessible via the DIBBS platform, and all submitted proposals must meet the technical and compliance demands outlined by the contracting authority to be considered eligible for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE