Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Granular Activated Carbon (GAC) Filtration System Service

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the maintenance, media replacement, and performance testing of granular activated carbon filtration systems utilized for water or air purification at CFA Yokosuka, with services required to ensure continued operational effectiveness and regulatory compliance. The work involves routine inspections, timely replacement of degraded GAC media, and comprehensive testing to validate system performance under specified conditions, all critical to sustaining the quality of purified water and air at the facility. The contract is structured as a subcontract under NAICS code 333992, which classifies it within the industrial machinery and equipment manufacturing sector, and is managed by the Naval Facilities Engineering Systems Command Far East under the Department of Defense. The solicitation was posted on July 23, 2026, with a required response deadline of September 3, 2026, indicating a competitive procurement timeline for qualified subcontractors. The place of performance is fixed at CFA Yokosuka, and while specific address details are not provided, the work is localized to this facility in Japan. There is no set-aside classification indicated, suggesting eligibility is open to all qualified firms regardless of size or certification status. The contract does not include a designated point of contact, implying all inquiries must be directed through official SAM.gov channels, with the official link provided for further information and submission.

General Info

Maintenance, media replacement, and testing of GAC filtration systems at CFA Yokosuka for regulatory compliance.

Agency

Department Of Defense → Navfacsyscom Far EastView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

AP

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Far East
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Navfacsyscom Far East
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Maintenance, media replacement, and performance testing of GAC filtration systems used in water or air purification at CFA Yokosuka.

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
Federal
ELECTRODE,WELDINGThis contract, issued under solicitation number N0010426QFG29 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks welding electrodes classified as Special Emphasis Level I material for use in critical shipboard systems where failure could result in catastrophic loss of life or vessel integrity. The items must strictly conform to specification T9074-BC-GIB-010/0200 and associated appendixes, including specific requirements for chemical composition, mechanical properties, and welding parameters, with chromium content limited to 0.20% to control hexavalent chromium fumes. All materials must be traceable from heat lot to final delivery via unique identifiers on container labels, and certification data must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with no material allowed to ship without formal acceptance. Contractors must maintain an ISO-9001 or equivalent quality system, comply with strict documentation standards, and provide signed, unqualified certifications affirming full compliance with all contractual and specification requirements. The contract mandates 100% inspection of traceability markings and certification documents, prohibits transcribed or disclaimered data, and requires strict control over subcontractors and supply chain integrity. Delivery is scheduled over 365 days with early or incremental shipments permitted at no added cost, and variations in quantity are limited to a maximum of -5% under specific conditions. All materials must be mercury-free, packaged in accordance with MIL-STD-2073, and shipped in 10-pound containers with proper labeling. Compliance with Buy American and small business subcontracting provisions is required, and waivers or deviations must be formally requested and approved through the ECDS system. The contracting officer retains authority to conduct government quality assurance at source, and all certifications, engineering change proposals, and documentation must be electronically submitted using ECDS or WAWF. The procurement is issued under emergency acquisition flexibility, and only qualified products listed on the approved QPL are acceptable, with no exceptions for unapproved sources.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 333992
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle under the NSN 5935-01-225-6820 and part number M28840/14AA1S1, aligned with MIL-DTL-28840/14G and MIL-DTL-28840 specifications. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The product is designated as a critical application item and must adhere to rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions forbid the intentional addition of mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lamps, and medical instruments, with additional containment and shock-proofing requirements for portable mercury-containing devices. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without explicit contracting officer approval, though exceptions apply to commercial items and numbered parts. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin in 91 days, with zero variance in quantity, inspected and accepted at destination. Each unit is priced at $28.00, totaling $784 for 28 units, and must be shipped to the DLA Distribution facility in New Cumberland, PA, following DLAD Proc Notes C19 and C20 for transportation and first destination handling. The original required delivery date is June 27, 2026, with a need ship date of November 3, 2026, under solicitation SPE7M5-26-T-351P, issued by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333992
New
DIBBS
TRANSFORMER, POWERThe contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333992
New
Federal
Recirculating Aquaculture System (RAS) – Salmon Incubation ModuleThe contract entails the supply and delivery of a fully self-contained recirculating aquaculture system designed specifically for salmon incubation, featuring four racks with eight-tray incubators totaling 32 trays. The system must meet stringent technical specifications and adhere to all applicable government standards to ensure optimal water quality, temperature control, and biological filtration necessary for successful salmon egg development and early-stage fry rearing. The equipment is intended for use at a designated performance location in Trail, Oregon, with postal code 97541, and must be installed and operational in compliance with regulatory and operational requirements specific to federal aquaculture operations. This subcontract is a Total Small Business Set-Aside under the SBA program, meaning only small business concerns are eligible to bid, and it is classified under NAICS code 333992 for Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of August 6, 2026, at 5:00 PM local time. The contracting activity is managed by the Department of Defense through the W071 Endist Portland office, indicating this system supports a military or defense-related aquaculture initiative. All proposals must demonstrate technical capability, compliance with standards, and the ability to deliver within the specified timeline without delays.
W071 Endist Portland

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333992
New
Federal
ROD,WELDINGThis contract, issued under solicitation N0010426QFE28 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, mandates the supply of 51 units of E7018-B2L low alloy steel covered arc welding electrodes, meeting strict military and industry standards including AWS A5.5, AWS A5.01, and MIL-E-22200, with specific deviations and amendments enforced. The material is designated as SPECIAL EMPHASIS Level I, meaning it is critical to shipboard systems where failure could result in loss of life, ship, or vital operations, requiring uncompromising quality control. All electrodes must be supplied in 10-pound containers with traceable labeling, including heat-lot numbers and type designations on both packaging and electrodes themselves, and must be certified under ISO-9001 or MIL-I-45208 with calibration compliance to ISO-10012, ANSI-Z540.3, or ISO/IEC 17025. The contractor must submit comprehensive Certificate of Compliance documents via WAWF prior to each shipment, with certifications including signed attestations of full compliance, no disclaimers, and direct traceability from test reports to physical material. Delivery is due within 365 days, with early or incremental shipments permitted at no added cost, and any quantity variation is strictly limited to a maximum 5% reduction. All contractual requirements are enforced under emergency acquisition flexibilities, and strict inspection and acceptance protocols are mandated without waiver. Certification documentation must be submitted to Portsmouth Naval Shipyard via WAWF, with designated ship-to, inspect-by, and accept-by codes, and no material may be shipped without formal acceptance. The contractor must maintain complete records of inspections, tests, and corrective actions and ensure all sub-tier suppliers are vetted and audited for quality compliance. Prohibited elements include mercury contamination, unauthorized markings, and deviations unless formally approved and classified as Critical, Major, or Minor through ECDS submission. Electronic data must comply with strict formatting and submission rules through the ECDS portal, and contractual documents are governed by a defined precedence hierarchy, with the contract text overriding referenced standards unless explicitly exempted. The contract explicitly prohibits export, distribution, or use beyond U.S. government channels and requires full adherence to Buy American provisions, warranty of one year from delivery, and security restrictions under class deviations. Failure to meet any requirement will result in rejection of material, and
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Navfacsyscom Far East

Same awarding agency

NAICS: 238210
New
Federal
Low-Voltage and IT Systems IntegrationThe contract pertains to the integration of low-voltage and IT systems within renovated hospital areas at a Department of Defense facility in Yokosuka, focusing on the installation of nurse call systems, security infrastructure, data networks, and building automation controls. The work is classified under NAICS code 238210, indicating it falls under electrical and other construction installation services, and is structured as a subcontract with a response deadline of August 10, 2026. The scope requires precise coordination across multiple technical disciplines to ensure seamless functionality, compliance with military standards, and minimal disruption to ongoing hospital operations. All systems must be engineered for reliability, scalability, and interoperability within the existing infrastructure of the medical facility. Performance is centered at the Yokosuka site under the oversight of Navfacsyscom Far East, a U.S. Navy organization responsible for facility engineering and construction management. The project demands specialized expertise in medical-grade communication systems, cybersecurity protocols for data networks, and energy-efficient building controls aligned with federal and DoD requirements. Contractors must demonstrate proven experience in similar healthcare environments, ability to meet stringent certification thresholds, and capacity to deliver under strict timelines without compromising patient safety or operational continuity. While no set-aside status is specified, participation is limited to qualified subcontractors capable of executing complex, mission-critical installations within sensitive institutional settings.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 236220
New
Federal
Laboratory RenovationThe contract titled Laboratory Renovation pertains to the upgrade of clinical and pathology laboratories at a Department of Defense facility in Yokosuka, focusing on critical safety and operational infrastructure. Key improvements include the installation of fume hoods, biosafety cabinets, specialized ventilation systems, and secure chemical storage solutions to meet modern laboratory safety standards and regulatory requirements. These enhancements are essential for ensuring the safe handling of hazardous materials, protecting personnel, and maintaining compliance with health and safety protocols in a high-risk biomedical environment. This is a subcontract under NAICS code 236220, indicating construction of commercial and institutional buildings, and is managed by Navfacsyscom Far East within the Department of Defense. The opportunity was posted on July 23, 2026, with a strict response deadline of August 10, 2026, at 6:30 AM, limiting the window for qualified contractors to submit proposals. The place of performance is specifically designated as Yokosuka, requiring contractors to account for local regulations, logistics, and potential operational constraints associated with military installations. While no set-aside classification or point of contact is specified, the scope demands expertise in laboratory construction, safety system integration, and adherence to stringent federal and institutional guidelines for biomedical facilities.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 236220
New
Federal
Radiology Department RenovationThe contract pertains to the renovation of radiology departments at a facility in Yokosuka, involving the upgrade of imaging suites to accommodate advanced medical equipment including X-ray, CT, and MRI systems. The scope includes the installation of radiation shielding, structural reinforcement to support heavy machinery, and the integration of low-voltage systems necessary for the safe and efficient operation of the equipment. All work must comply with stringent safety and operational standards to ensure both patient and staff protection, as well as the integrity of the imaging technology. The project is classified under NAICS code 236220, indicating it falls within the specialty trade contractors for commercial and institutional building construction. This is a subcontract opportunity issued by the Department of Defense through Navfacsyscom Far East, with a response deadline of August 10, 2026, at 6:30 AM. The work is to be performed exclusively at the Yokosuka location, and contractors must be prepared to meet all regulatory, technical, and logistical demands associated with defense facility upgrades. While the solicitation number and point of contact are not provided, interested parties can access further details via the official SAM.gov link. The contract type is explicitly identified as a subcontract, suggesting the prime contractor is managing broader facility improvements and subcontracting this specialized renovation component.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 236220
New
Federal
Emergency Department RenovationThe contract involves a full renovation of the Emergency Department at a military medical facility in Yokosuka, requiring comprehensive demolition, structural modifications, and upgrades to mechanical, electrical, and plumbing systems, along with the installation and integration of medical gas systems. All work must be executed while maintaining continuous hospital operations, necessitating careful phasing, coordination, and adherence to strict operational protocols to ensure patient safety and uninterrupted care delivery. The project falls under NAICS code 236220 for hospital construction and is structured as a subcontract under the Department of Defense, managed by Navfacsyscom Far East. Responses to this solicitation are due by August 10, 2026, at 6:30 AM, with the opportunity posted on July 23, 2026. The place of performance is firmly established at the Yokosuka facility, and while no set-aside designation or point of contact details are provided, the nature of the work demands specialized expertise in healthcare construction, particularly in high-stakes environments where operational continuity is non-negotiable. Contractors must demonstrate proven experience in hospital renovations with similar constraints, including the ability to manage complex logistics, comply with federal healthcare standards, and execute work around active clinical services without compromising safety or regulatory compliance.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 811111
New
Federal
Warranty & In-Theater Service SupportThe contract seeks a subcontractor to provide warranty administration and repair services for delivered vehicles through local service networks operating in Okinawa, focusing on in-theater maintenance and support to ensure vehicle readiness and compliance with warranty requirements. Work must be performed using established local service providers capable of handling diagnostics, parts coordination, labor, and documentation in alignment with defense standards, with the goal of maintaining operational availability of vehicles across the region. All activities are governed under the NAICS code 811111 for automotive repair and maintenance, and the effort is classified as a subcontract under the Department of Defense’s Navfacsyscom Far East. The solicitation was posted on July 23, 2026, with a response deadline of August 12, 2026, at 3:00 a.m. The place of performance is confirmed to be in Okinawa, and while no specific office address or point of contact is listed, the contracting authority is clearly identified as a U.S. Department of Defense entity. Bidders must be prepared to interface with military logistics systems, adhere to strict repair protocols, and demonstrate proven capability in warranty management within a forward-deployed environment. The contract does not specify set-aside status, suggesting it is open to general industry competition without restrictions based on business size or ownership type.
General Automotive Repair

POSTED

3 days ago

DEADLINE

in 16 days
View Details