GREASE, UTILITY

GREASE,UTILITY
GREASE, UTILITY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
ORIGINAL MANUFACTURER'S UNIT PACKAGING
IS REQUIRED. REPACKAGING IS NOT
AUTHORIZED.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
PHYSICAL FORM FREEZE-DRIED GRANULE.
QUANTITY WITHIN EACH UNIT PACKAGE 100.0 GRAMS.
SPECIAL FEATURES FLASH POINT (CLOSED CRUCIBLE: APPROX. 225 DEG C;
SPE4A5-27-T-0947
SECTION B
DENSITY (20 DEG C): MIN. 1000 KG/M3 /// FLAMMPUNKT (GESCHLOSSENER
TIEGEL: CA. 225 DEG C; DICHTE (20 DEG C): MIN. 1000 KG/M3.
BASIC INGREDIENT MINERAL OIL AND ZINC OXIDE AND TITANIUM DIOXIDE AND
SILICA.
UNIT OF ISSUE = CASE (CS), ONE CS CONTAINS TWENTY (20.0) EACH 100.0
GRAMS.
MAN TRUCK & BUS SE D3273 P/N 09.16012-0117
RHEINMETALL MAN MILITARY VEHICLES U16Z7 P/N 09.16012-0117
BAE SYSTEMS SURFACE SHIPS LIMITED U06R7 P/N 10000006815
BP EUROPA SE C6355 P/N 468666-DE03-100G
SOC INDUSTRIELLE F1537 P/N 876298
MAN ENERGY SOLUTIONS SE D9524 P/N 987.01.305
BP EUROPA SE C6355 P/N MOLUB-ALLOY PASTE WHITE T 100G
BOEING DISTRIBUTION SERVICES INC Z0CQ1 P/N MOLUB-ALLOY PASTE WHITE T 100G
MAN ENERGY SOLUTIONS SE D9524 P/N MYX1A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018584014 0001 CS 1.000
NSN/MATERIAL:9150123824472
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE4A5-27-T-0947
SECTION B
PR: 7018584014 PRLI: 0001 CONT’D
N7599A
USS HARRISBURG LPD-30
SUPRVISOR OF SHIPBUILDING GULF
PO BOX 7003
PASCAGOULA MS 39567
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N7599A
USS HARRISBURG LPD-30
HUNTINGTON INGALLS INC. COSAL WH 2
13486 FASTWAY LANE
GULFPORT MS 39503
US
M/F: (TCN) N7599A6216C061
RDD: 777
PROJ: ZQ0 TP 1
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: V3B ADV: 23 FC: V7
Need Ship Date:00/00/0000 Original Required Delivery Date:10/02/2026
SPE4A5-27-T-0947 NSN/Part Number: 9150-12-382-4472 Quantity: 1 CS Purchase Request: 7018584014QTY: 1 Delivery: 5 days ADO