Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Green pump laser for femtosecond-duration Titanium:sapphire laser osillator

Active
26-58177International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council Canada requires the supply of one research-grade continuous-wave green pump laser to replace an aging system used in quantum photonics and nonlinear optics research. The equipment must be fully compatible with an existing Spectra Physics Tsunami HP model 3941C-25HP or 3941C-20HP femtosecond-duration titanium:sapphire laser oscillator, supporting a repetition rate of 80 MHz ±100 kHz. This procurement is being conducted as a limited tender, with mks Spectra Physics of Irvine, California, USA, pre-identified as the only known source capable of meeting the mandatory technical requirements and maintaining system compatibility. The laser must meet strict technical specifications, including a center wavelength of 532 nm ± 1 nm, adjustable output power between 20 W and 21 W, and a polarization extinction ratio of at least 100:1. Additional requirements include integrated noise less than 0.04% RMS, a beam height of 14.84 cm, and an optical bench footprint not exceeding 25 cm by 60 cm. The successful supplier must provide all necessary power supplies and hardware, a minimum one-year warranty on parts, labor, and power supplies, and ongoing technical support. The final product must be delivered on or before January 28, 2027, and any foreground intellectual property arising from the contract will vest in the contractor.

General Info

NRC Canada is procuring a specific green pump laser from MKS Spectra Physics.

Documents

2

ACAN 26-58177 - Green Pump Laser for Millennia Tsunami

PDF, High priority: read this firstpresolicitation
High

ACAN 26-58177: Green Pump Laser for Tsunami HP Oscillator

PDF, High priority: read this firstpresolicitation
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts
Jessica CanasContracting Authority

Full Description

Show more
The National Research Council Canada (NRC) has a requirement for the supply of one research-grade continuous-wave green pump laser, or equivalent, for use with an existing Spectra Physics Tsunami HP model 3941C-25HP femtosecond-duration titanium: sapphire laser oscillator.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
Grayloc Products (hubs, clamps/studs/nuts, and seals
Solicitation # 80NSSC27944845Q
The National Aeronautics and Space Administration Stennis Space Center is seeking capability statements for the procurement of Grayloc Products, specifically hubs, clamps, studs, nuts, and seals. This requirement is categorized under NAICS code 334516 and is being conducted as an acquisition of commercial items under FAR Part 12. The government intends to issue a sole source contract to Grayloc Products, L.L.C. under the authority of FAR 12.102(a), as they have been determined to be the sole provider of the required components. The scope of work includes various specialized items such as Grayloc seal rings, hubs, and clamps with specific material requirements including AISI 630, SA105, and SA182-F304. Deliverables must include a certificate of compliance and material test reports, with certain PTFE CTD seal rings adhering to GPCS 6.3.1.2.1 standards. Performance and delivery will take place at the Stennis Space Center in Mississippi, with an expected lead time of one to eight weeks after receipt of order. Interested vendors must submit written capability statements referencing the notice ID by October 16, 2026, at 4:00 p.m. CST. Please note that quotes will not be evaluated at this stage, as the government is only requesting capability statements to determine if the procurement should be conducted on a competitive basis.
National Aeronautics And Space Administration

POSTED

about 7 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-27-T-0169
Solicitation SPE2DH-27-T-0169, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for gas analyzer measuring tubes (NSN 6630-12-189-3126). The required items are Draeger Carbon Dioxide 100/A-P round glass tubes with melted tips, designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The unit of issue is a package containing 10 tubes. The procurement includes multiple line items with total quantities reaching 17 packages, with delivery required within 20 days after order. Delivery is FOB Destination to locations including the USS Pioneer MCM 9 and USS Harvey C Barnum Jr. The contract mandates strict quality and shelf-life requirements, specifying a non-extendable shelf life of 24 months, with no more than 3 months elapsed from the date of manufacture to the date of delivery. Packaging must comply with ASTM D3951 and RP001, while marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Inspection and acceptance will occur at the destination.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
SLED
Thermo S02 Analyzer
Solicitation # 46-27
Solicitation 46-27, issued by the New Hampshire Department of Administrative Services, Division of Procurement and Support Services, seeks a responsible vendor to provide one Pulsed Fluorescent SO2 Analyzer. The required equipment must feature measurement ranges from 0-50 ppb to 0-100 ppm, 100-120 VAC, 50/60 Hz power with an IEC-A electrical plug, and Serial, Analog, and Digital C capabilities. All items must be new and of the current model year. The contract will be established as a purchase order, with the award granted to the conforming bidder offering the lowest cost. Bids are due by October 28, 2026, at 10:00 AM Eastern Time and must be submitted via email to the Bureau of Purchase and Property. The successful vendor must complete delivery within 30 days of receiving the purchase order on an FOB Destination basis to the state agency's receiving dock. Payment will be made via ACH 30 days after the invoice is received or after items are delivered and accepted, whichever is later. Vendors must be registered to conduct business in New Hampshire and are required to provide material safety data sheets for products covered by the Worker's Right to Know Act. Additionally, contractors are encouraged to use environmentally preferable materials, must eliminate PVC or polystyrene where possible, and must notify the state if products contain mercury or PFAS.
Das Purchasing (statewide Bids & Contracts)

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 238160
New
International
Roof Replacement Building M-20
Solicitation # 26-58140
Solicitation 26-58140 is an invitation to tender issued by the National Research Council Canada for the replacement of various roof areas at Building M-20, located at 1200 Montreal Road in Ottawa, Ontario. The project requires the supply and installation of materials according to detailed technical plans and specifications, with all work to be completed within seven weeks of the notification of acceptance. Bidders were required to attend one of two mandatory site visits held on October 6 or 7, 2026. Following an amendment, the final deadline for bid submissions was extended to October 27, 2026, at 2:00 p.m. EDT. The procurement process mandates several critical submission requirements, including bid security, a bid and acceptance form, integrity verification, a reciprocal procurement declaration, Canadian materials certification, and a certificate of insurance. Specifically, insurance policies must provide coverage for torch-applied systems. The successful contractor must adhere to strict safety and environmental standards, including WHMIS labeling, the Occupational Health and Safety Act, and a waste management plan ensuring 90 percent of construction waste is recycled or salvaged. Contract administration is managed by Stephane Lajoie, with payments processed within 28 calendar days of a proper invoice per the Federal Prompt Payment for Construction Work Act. Post-award performance will be evaluated based on project management, contract management, health and safety, and completion rates. Required closeout deliverables include a one-year overall construction warranty and the submission of a GANTT chart and cost breakdown within 72 hours of the award.
Roofing Contractors

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334516
New
International
Asymmetric Centrifugal Mixer
Solicitation # 26-58184
The National Research Council of Canada, specifically the Department of Advanced Materials for Additive Manufacturing Team within the Quantum and Nanotechnologies Research Centre, is seeking the supply of one high-capacity asymmetric centrifugal mixer. This bladeless mixing system is intended for laboratory-scale development of advanced material formulations, including polymers, composites, adhesives, inks, and slurries. The equipment must be capable of processing batches up to 1,000 g or 2 L and must provide simultaneous mixing and deaeration of high-viscosity and particle-filled materials to ensure consistent, repeatable, and contamination-free results. Key technical requirements include servo-assisted motion control, an integrated touchscreen user interface for programming speed and duration, and the inclusion of all necessary container holders and adapters. For safety and compliance, the system must feature an emergency stop, safety interlocks on access doors, and CSA certification or an equivalent safety standard. All electrical components must be compatible with standard Canadian voltages of 120 V/240 V at 60 Hz, and all manuals and equipment information must be provided in English. The equipment is scheduled for delivery by March 31, 2027, with installation and commissioning to be completed within six months of delivery. This presolicitation, identified by solicitation number 26-58184, requires interested suppliers to submit a statement of capabilities by October 23, 2026, demonstrating that their system satisfies all mandatory technical requirements.
Analytical Laboratory Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in 9 days
View Details
NAICS: 334516
International
Active Vibration Isolation System compatible with a Thermo Fisher Scientific Verios 5 Ultra High Resolution Scanning Electron Microscope (UHR-SEM)
Solicitation # 26-58154
The National Research Council Canada is soliciting proposals for the acquisition of one Active Vibration Isolation (AVI) system compatible with a Thermo Fisher Scientific Verios 5 Ultra High Resolution Scanning Electron Microscope (UHR-SEM). The system is required to eliminate low-frequency mechanical vibrations and environmental noise that currently hinder high-magnification imaging. The successful contractor must provide a comprehensive package including the AVI system, installation, on-site training, documentation, and warranty support. All deliverables must be received at the delivery location in Ottawa, Ontario, by January 29, 2027. The AVI system must meet strict mandatory technical criteria, including a closed-loop feedback control system utilizing piezoelectric or geophone sensors and actuators, and the ability to provide isolation across all six degrees of freedom within a frequency range of 1 Hz to 200 Hz. The system must support a load capacity of 960 kg and be installable without powered lifting or rigging equipment. Compliance with the Canadian Electrical Code and the RoHS Directive is required. The contract will be awarded to the compliant offer with the lowest evaluated price. Proposals must be submitted electronically in three separate sections: technical, financial, and administrative declarations. The procurement is subject to the Policy on Reciprocal Procurement, limiting eligibility to Canadian suppliers and those from applicable trading partners. Additionally, all on-site personnel must maintain a valid Reliability Status NRC Security Screening Level. Payment will be made within 30 days of receiving an undisputed invoice.
Analytical Laboratory Instrument Manufacturing

POSTED

10 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 335999
International
Uninterruptible Power Supply (UPS)
Solicitation # 26-58072-B
The National Research Council Canada (NRC) is issuing Request for Proposal 26-58072-B for the procurement of one Uninterruptible Power Supply (UPS) system to support Biologic BCS-815 battery cyclers at the NRC Boucherville laboratory in Quebec. This solicitation is a reissue that cancels and supersedes solicitation 26-58072. Under the Policy on Reciprocal Procurement, eligibility is restricted to Canadian Suppliers Partners. The contract will be awarded to the compliant offer with the lowest evaluated price. The final delivery of the equipment to Boucherville, Quebec, must be completed by March 31, 2027, with the overall contract term extending to that date. To be considered compliant, the UPS must meet several mandatory technical criteria, including a minimum rated power of 15 kW, three-phase input and output voltage of 208 V at 60 Hz, and a minimum runtime of 5 minutes at 100 percent rated output load. The system must operate within an ambient temperature range of 0 to 40 degrees Celsius and not exceed maximum dimensions of 60 cm width, 100 cm depth, and 170 cm height. Additionally, the equipment must feature a visible approval certification label from a body accredited by the Standards Council of Canada and comply with Part 1 of the Canadian Electrical Code. Offers must be submitted electronically by October 16, 2026, at 14:00 EDT, divided into three distinct sections: a technical offer, a financial offer, and the required submission and declaration forms. Financial information must be kept exclusively within the financial proposal to avoid non-compliance. Packaging must align with the Policy on Green Procurement, utilizing reusable, returnable, or recyclable materials. Payment will be made via direct deposit, EDI, or wire transfer within 30 days of receiving an undisputed invoice.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS