Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GROMMET, NONMETALLIC

Active
SPE4A6-26-T-10EEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 9 nonmetallic grommets with part number 17012077 and NSN 5325-01-716-9975, sourced from Parker Hannifin Corporation or Integrated Procurement Technologies. Delivery is required within 150 days from the contract’s award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the origin, following stringent quality protocols including MIL-STD-1916 or equivalent zero-based sampling methods, with critical attributes held to an acceptance quality level of 0.1 and non-conformances not permitted unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, with tailored higher-level quality provisions applying to both manufacturers and non-manufacturers. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging standards, with marking in accordance with MIL-STD-129 and no special marking required. The item is classified as a critical application component, and all documentation, including source approval and physical identification, must meet DLA’s R and I numbered requirements. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for February 26, 2027, and a needed ship date of January 3, 2027. The contract, issued under SPE4A6-26-T-10EE, is an urgent federal procurement managed by the Department of Defense’s ASC Commodities Division, with direct contact information provided for inquiries.

General Info

Procure 9 nonmetallic grommets, part 17012077, deliver by Jan 3, 2027, to New Cumberland, PA, zero variance, strict quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-10EE.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Derrick Looney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GROMMET,NONMETALLIC
GROMMET,NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
PARKER HANNIFIN CORPORATION 62144 P/N 17012077
INTEGRATED PROCUREMENT TECHNOLOGIES 4K0V2 P/N 17012077
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-10EE
SECTION B
PR: 7017408134 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017408134 0001 EA 9.000
NSN/MATERIAL:5325017169975
DELIVERY (IN DAYS):0150
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/03/2027 Original Required Delivery Date:02/26/2027
SPE4A6-26-T-10EE NSN/Part Number: 5325-01-716-9975 Quantity: 9 EA Purchase Request: 7017408134QTY: 9 Delivery: 150 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for the procurement of 272 units of a spacer plate identified by NSN 5365-01-442-0560 and part number DAA3121F926-060, manufactured by Triumph Aeronautics, LLC. Delivery is required FOB origin within 150 days of contract award, with zero variance allowed in quantity and inspection and acceptance occurring at the origin. All items must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per DLA packaging standards. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and critical attributes are assigned the highest verification levels. Measuring and test equipment must be calibrated and documented, and all non-accepted items must have government identification removed. Special marking is not required, and the item is designated as a critical application component. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the need ship date set for January 3, 2027, and the original delivery deadline set for March 8, 2027. The solicitation was issued under contract number SPE4A7-26-T-599B with a response deadline of August 5, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
KNOBThis contract pertains to the procurement of one unit of a specific knob component identified by NSN 5355016272721 and part number U-CAR-016-A, with a complementary part number P9-096-40-M4N-15 from SOUTHCO INC. The delivery is required within ten days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must strictly comply with ASTM D3951, unless superseded by higher-priority technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and DLA Packaging Requirements RP001. The unit must be palletized according to the specified DLA standards, and the shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The consignee is the US Army at Fort Bliss, Texas, designated under the military freight code W4546F, with shipment reference RDD 555, project code TP 2, and mandatory marking including the TCN W4546F61700153. All supplies must have government identification removed if not accepted. The contract is issued under solicitation SPE7L3-26-T-137D with a required delivery date of June 25, 2026, and involves Covered Defense Information as defined by applicable regulations.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SPECIAL SHAPThis contract covers the procurement of a spacer with a special shape, identified by part number 06386-05011-102 and NSN 5365-01-717-8144, for a quantity of five units. The item is classified as a critical application item for Sikorsky Aircraft Corporation and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be assigned verification levels or AQLs as specified. Packaging must conform to MIL-STD-2073-1E with preservative method 31, and marking must follow MIL-STD-129 with no special marking codes applied. Palletization and logistics must meet DLA packaging requirements, and all shipments are to be delivered FOB origin to the designated destination in New Cumberland, Pennsylvania, with a delivery timeline of 129 days from the award date. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Documentation for source approval and compliance with all referenced standards is mandatory, and the unit of issue is the each. The required ship date is May 12, 2026, with the original delivery due by August 25, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SHIMThis contract, issued under solicitation number SPE7L1-26-T-886Q, requires the delivery of two SHIM units with NSN 5365-01-674-5232 at a unit price of $2.00 for a total value of $4.00, with delivery required within 20 days FOB origin. All packaging and labeling must strictly comply with MIL-STD-129 and ASTM D3951, while adhering to the overriding technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements identified by R or I numbers. The unit of issue is EA, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be palletized in accordance with DLA Packaging Requirements for Procurement (RP001). The delivery address is Fort Stewart, Georgia, under shipment reference RDD 777, with freight shipping and marking instructions directed to the same location. Shipments must be sent via the fastest traceable means excluding parcel post and include the contract-specific marking for government use. The required delivery date is July 2, 2026, and the contract is subject to DLA’s standardized acquisition protocols, including the use of DoD-authorized units of issue as referenced in their official documentation. The point of contact for this solicitation is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a single spacer sleeve identified by NSN 5365-01-648-5592 and part number 1592890, with a requirement to deliver one unit within 20 days from the contract award date. Delivery is FOB origin, with no tolerance for quantity variance—precisely one unit must be provided. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by more stringent DLA Master List of Technical and Quality Requirements, which take precedence. All packaging must be marked and labeled per MIL-STD-129, and the unit of issue is each, with one unit packed per container. The item must be palletized according to DLA packaging standards and shipped via traceable freight methods, excluding parcel post. The delivery and shipping address is Fort Hood, Texas, under the military unit identifier W91TB4. The contract number is SPE7L1-26-T-886S, with the required delivery date set for January 20, 2026, and the solicitation was posted on July 28, 2026, with bids due by August 10, 2026. The buyer is the Department of Defense, specifically the Land Supply Chain organization, and the point of contact is Kristina Derry. Government-specific identifiers, project codes, and distribution codes are included for internal tracking and compliance purposes.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for the procurement of 105 SPACER, PLATE units with NSN 5365-01-718-3545 under solicitation SPE4A5-26-T-311J, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 129 days after award, and the solicitation closed on August 5, 2026. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted items. All items require physical identification marking per RQ017, and inspection sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, assigning verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. Configuration changes require formal engineering change proposals or variance requests under RQ002, and source approval documentation is mandatory under RC001. The item contains controlled technical data subject to ITAR or EAR regulations, with disclosure or export restricted to contractors who hold approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have received formal authorization from DLA. Access to this data is strictly limited, and DFARS 252.225-7048 governs its handling. The place of performance is New Cumberland, PA, with Johquin Wiley designated as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SHIMThe contract pertains to the procurement of a shim item identified by NSN 5365017180938 and part number 06070-20002-103, with a quantity of six units to be delivered FOB origin within 129 days of contract award, no variance allowed in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific procedures for preservation, wrapping, and marking per MIL-STD-129 with no special marking required. Item Unique Identification is not mandated per the service customer’s request, and sampling follows Sikorsky Corporation’s approved alternate plan meeting or exceeding ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE4A5-26-T-311L, with a required ship date of May 12, 2026, and an original delivery deadline of August 26, 2026. Unit of issue is each, priced at six dollars per unit, with total value of thirty-six dollars. All transportation logistics are governed by DLA procedural notes C19 and C20, and the primary point of contact is Johquin Wiley of the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract is for the procurement of five BUSHING, SLEEVE parts with NSN 5365-01-715-9942 and part number 06208-03011-102, supplied by SIKORSKY AIRCRAFT CORPORATION under solicitation SPE4A5-26-T-311G. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date. Packaging and marking standards are strictly defined per MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA’s packaging requirements. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major. The parts must be delivered FOB origin with no quantity variance allowed, inspected and accepted at destination, and delivered to the DLA distribution facility in New Cumberland, PA by May 12, 2026, with a contractual delivery window of 129 days. Documentation requirements for source approval are mandated, and government identification must be removed from non-accepted items. All aspects of supply, from identification to delivery, are governed by DLA procedures and DoD unit of issue standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThe contract is for one retaining ring, commercial off-the-shelf item with part number 25489 and NSN 5325-01-691-1724, supplied by TULSA WINCH, INC., under solicitation SPE4A0-26-T-4072. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, using zero defect acceptance unless otherwise defined, with attributes classified as VII, IV, and II for critical, major, and minor characteristics respectively. The delivery is FOB origin with a five-day window from the contract award, and the destination is Camp Humphreys, Building P6953, Pyeongtaek, South Korea, under RDD 999/NMCS shipment per DLAD PROC NOTE C19 and C20. The unit of issue is each, quantity is one, and the purchase request is 7017607648; there is zero variance allowed in quantity. Packaging must adhere to DLA requirements, including palletization and preservation methods, and the item must be delivered by July 23, 2026. All contractual obligations, including government-specific identifiers and shipping instructions, are bound by strict compliance procedures, and the contract is managed by the Department of Defense’s Aviation Supply Chain ESoC Buys, with Danita Davis as the point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Counterfeit Electronic Parts Detection System ImplementationThe contract seeks the development and maintenance of a detection and avoidance system designed to identify and prevent the infiltration of counterfeit electronic components within the RF assembly supply chain. This effort is critical to ensuring the integrity and reliability of defense-related electronic systems by implementing advanced technologies that can authenticate components at various stages of procurement and assembly. The system must support real-time detection capabilities, integrate with existing supply chain workflows, and provide auditable logs to meet stringent defense standards for component traceability and provenance. The contractor will be responsible for ongoing system updates, calibration, and support to adapt to evolving counterfeit methods and emerging component technologies. This is a small business total set-aside subcontract under NAICS code 541330, indicating it is reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support defense supply chain operations, with performance likely requiring collaboration with government stakeholders and adherence to federal acquisition regulations. The emphasis is on innovation, rapid deployment, and sustainable maintenance to ensure long-term resilience against counterfeit threats in high-stakes RF applications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract requires the transportation of RF cable assemblies to locations within the contiguous United States, with strict compliance for international shipments using U.S.-flag vessels as mandated by federal regulations. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration guidelines are eligible to bid. The North American Industry Classification System code 484220 applies, indicating the scope centers on truck transportation for local and long-distance freight services, though international legs require vessel transport under U.S. registry. The contracting agency is the ASC Commodities Division within the Department of Defense, and the solicitation is open for responses until August 7, 2026, with a posting date of July 28, 2026. Performance locations span both domestic and international destinations, necessitating logistics providers to具备 the capability to navigate complex regulatory environments including maritime laws and defense logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541618
New
DIBBS
Export-Controlled Technical Data ManagementThis contract mandates the secure management and controlled distribution of technical data subject to the International Traffic in Arms Regulations and the Export Administration Regulations, requiring strict adherence to U.S. and Canadian Joint Certification Program standards to ensure compliance with bilateral export control requirements. All handling, storage, transmission, and access to regulated information must be executed through validated security protocols, approved facilities, and authorized personnel with appropriate clearances and training, ensuring no unauthorized disclosure or transfer occurs under any circumstances. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration, and is classified under NAICS code 541618 for other scientific and technical consulting services. It is issued by the ASC Commodities Division within the Department of Defense, with responses due by August 7, 2026, and is accessible via the DIBBS platform. Performance is expected to meet all federal export control obligations regardless of geographic location, with no specific place of performance identified, implying flexibility but with full accountability for compliance across all operational environments.
Other Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Defense-Grade Packaging and Marking ServicesThe contract entails the packaging and marking of RF cable assemblies in strict compliance with Defense Logistics Agency standards, ensuring full adherence to military-grade requirements for handling sensitive defense components. This includes implementing shock protection measures to safeguard assemblies during transit, applying government property labels as mandated, and securing the contents within tamper-resistant, containment-compliant packaging to maintain integrity and accountability throughout the supply chain. All work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 493190 designating the scope to warehousing and storage services specifically tailored for defense logistics. The contract is managed by the ASC Commodities Division under the Department of Defense, with proposals required to be submitted by August 7, 2026, following a July 28, 2026 posting date. The work is expected to be performed without a specified geographic location, and interested parties must respond through the official DIBBS portal referenced in the solicitation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract awards the manufacture and testing of 100 RF cable assemblies annually under strict military standards, requiring full lifecycle configuration control and comprehensive quality assurance processes to ensure consistent performance and traceability. All work must comply with applicable defense regulations and be performed with rigorous documentation to maintain integrity across production, testing, and delivery phases. The solicitation is set aside exclusively for small businesses as defined by the SBA, aligning with FAR 19.5, and falls under NAICS code 334417 for communications equipment manufacturing. The contract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 7, 2026, and was posted on July 28, 2026. Performance location details are not specified, and no point of contact is listed in the release. Subcontractors seeking to respond must demonstrate capability in high-reliability RF assembly, adherence to military specifications, and the ability to sustain quality control throughout the product’s lifecycle. All bids must be submitted through the designated DIBBS portal prior to the deadline.
Electronic Connector Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and SPRS Compliance SupportThis contract supports independent quality inspection, sampling, and SPRS compliance activities to ensure adherence to military standards and satisfy prime contractor evaluation criteria. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to bid, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued under the ASC Commodities Division of the Department of Defense. Performance location details are not specified, but the work is intended to support DOD procurement quality assurance objectives. The contract is structured as a subcontract, indicating it will be part of a larger prime contract ecosystem focused on supply chain compliance and inspection validation.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight HaulingThe contract is for the transportation of finished wiring harnesses from the manufacturer to various domestic military stock locations across the contiguous United States under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the seller’s facility. This is a small business set-aside subcontract classified under NAICS code 484220, which pertains to heavy and tractor-trailer truck transportation, ensuring eligibility is restricted to small businesses as defined by the SBA. The work is being procured by the ASC Commodities Division of the Department of Defense, and the solicitation is open for responses through August 7, 2026, with the opportunity posted publicly on the DIBBS platform. Performance will occur across multiple CONUS locations, requiring a carrier with the capacity to handle frequent, reliable shipments to geographically dispersed military stocking points.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract mandates the delivery of military-compliant packaging, preservation, and labeling services for finished wiring harnesses intended for extended storage and transport under demanding operational conditions. All work must adhere to strict defense standards ensuring the integrity, durability, and readiness of the assemblies, with specific requirements for corrosion inhibition, environmental protection, and secure containment to withstand extreme temperatures, humidity, and mechanical stress during military logistics cycles. The packaging and labeling must fully comply with applicable military specifications, including clear identification of part numbers, lot codes, handling instructions, and shelf life information to support traceability and field readiness. This is a total small business set-aside under the SBA program, restricted exclusively to businesses certified as small under NAICS code 493190, which covers warehousing and storage services. The opportunity is structured as a subcontract and is administered by the ASC Commodities Division under the Department of Defense. Bids must be submitted by the deadline of August 7, 2026, with no solicitation number provided. Performance location details are unspecified, but services are expected to support DoD supply chain requirements, with all work centered on ensuring long-term survivability and operational preparedness of wiring harnesses in austere environments.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335712
New
DIBBS
Cable and Wire Supply for Harness AssemblyThe contract solicits the supply of certified, traceable military-specification cables, wires, connectors, and insulation materials specifically for the production of wiring harnesses, ensuring strict compliance with defense-grade standards for reliability and performance. All materials must be fully traceable through documented lot numbers and quality control records to meet rigorous military requirements. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to compete, aligning with FAR 19.5 regulations. The NAICS code 335712 classifies this as a wiring and wiring device manufacturing contract, indicating the focus on specialized electrical components rather than general cable production. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, providing a ten-day window for submissions. The contracting activity is the ASC Commodities Division within the Department of Defense, and all performance is expected to adhere to federal defense supply chain protocols, though specific performance locations are not detailed. The procurement is accessible through the DIBBS platform, and bidders must ensure full compliance with military specifications, documentation requirements, and small business certification to qualify. No point of contact information is provided within the posting, suggesting all communication and submission must be handled through the designated federal procurement portal.

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Wiring Harness ManufacturingThe contract mandates the manufacture, testing, and delivery of fifty military-grade wiring harnesses designated by NSN 6150-01-119-4113, with strict adherence to established design specifications, material traceability, packaging protocols, and inspection requirements to ensure full compliance with defense standards. All units must meet rigorous quality and performance benchmarks expected for military applications, with documentation and certification required at every stage of production to guarantee accountability and readiness for field deployment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 335931, which corresponds to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued by the ASC Commodities Division under the Department of Defense. While specific performance location and point of contact details are not provided, the work is expected to align with defense logistics requirements, and all bids must be submitted through the designated DIBBS portal prior to the deadline.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 999999
New
DIBBS
Service UnavailableThe contract posting is currently unavailable due to system issues, preventing access to detailed prime contract information and related subcontract opportunities. The solicitation, identified under the number SPE4A626RXB88, was posted on July 28, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. The NAICS code 999999 indicates an undefined or placeholder classification, and no set-aside type, organizational details, or point of contact information has been provided. The place of performance and office address fields are unspecified, and no further administrative or operational details are accessible at this time. The official record can be viewed through the provided DIBBS link, though the system is currently unable to retrieve the underlying contract data.

POSTED

about 15 hours ago

DEADLINE

in 16 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Compliance & Cybersecurity SupportThe contract seeks ongoing cybersecurity compliance support to achieve and maintain CMMC Level 2 certification, focusing on system hardening, audit readiness, and full alignment with NIST SP 800-171 standards. The work involves implementing and managing technical and procedural controls to ensure continuous adherence to federal cybersecurity requirements, with an emphasis on preparing for third-party assessments and sustaining compliance over time. The contractor will be responsible for identifying gaps in current security postures, applying remediation measures, and documenting all control implementations to meet CMMC criteria. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 541512 for computer systems design services. The opportunity was posted on July 28, 2026, with responses due by August 7, 2026. While no specific location is designated for performance, the work is expected to be conducted remotely or at the contractor’s facility, supporting the DoD’s broader objective of securing its supply chain. The subcontract nature indicates the selected entity will provide services to a prime contractor or another subcontractor involved in DoD contractual obligations.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details