Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GROMMET, NONMETALLIC

Active
SPE4A1-26-T-2508Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 4 nonmetallic grommets with NSN 5325-01-610-9083 and part number MR200-1271 from Modus Advanced Inc., under solicitation SPE4A1-26-T-2508. Delivery is required FOB origin with zero variance in quantity and must be completed within 166 days, with an original required delivery date of January 25, 2027. Inspection and acceptance both occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129, and palletization must meet DLA packaging requirements. The grommets are to be shipped without special marking and in bulk packaging. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Documentation for source approval and removal of government identification from non-accepted items is mandated. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. All transportation and shipping details follow DLA procedures, and the contract references applicable quality assurance provisions and standardized procedures for compliance.

General Info

Procure 4 nonmetallic grommets at $4.00 each, FOB origin, deliver by Jan 25, 2027, to Tracy, CA, per DLA packaging and quality standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2508.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jade Stringfield
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GROMMET,NONMETALLIC
GROMMET,NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MODUS ADVANCED INC. 0CYC7 P/N MR200-1271
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696050 0001 EA 4.000
NSN/MATERIAL:5325016109083
DELIVERY (IN DAYS):0166
SPE4A1-26-T-2508
SECTION B
PR: 7017696050 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/25/2027 Original Required Delivery Date:01/25/2027
SPE4A1-26-T-2508 NSN/Part Number: 5325-01-610-9083 Quantity: 4 EA Purchase Request: 7017696050QTY: 4 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-11KT
The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-R-X800
The contract solicitation SPE4A6-26-R-X800 outlines the procurement of 271 machine bolts, NSN 5306-01-564-3371, designated as a Critical Safety Item under Navy identification, requiring stringent quality and traceability controls. The items must be manufactured in compliance with SAE AS9100 quality standards and referenced engineering drawings, with mandatory correction of a weight discrepancy on part number 70400-38159 for MP-35N material. Inspection and acceptance occur at origin, with sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified. Critical attributes are assigned verification levels VII, IV, and II (AQLs 0.1, 1.0, 4.0), while unspecified attributes are treated as major. First Article Testing is required, with government inspection and testing responsibilities clearly defined. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with each unit packed to include lot and serial numbers, contractor and manufacturer CAGE codes, and part number; special marking is not required. Palletization follows DLA Packaging Requirements RP001. The contract includes cybersecurity compliance under CMMC Level 2 self-assessment and mandates defense information handling under RD002. The delivery schedule requires full delivery in 476 days ADO, with separate line items for government test units requiring delivery in 210 and 296 days. All pricing is firm fixed price with zero variance allowed. The contract incorporates FAR clauses for changes, subcontracting, ethics, whistleblower protections, quality assurance, and first article testing, while DFARS clauses address counterfeit part avoidance, electronic sourcing, and safeguarding of controlled unclassified information. Invoicing must be submitted electronically via WAWF, and the estimated contract value ceiling is $350,000, though specific unit prices remain unspecified. The item is destined for Fleet Readiness Center East in Cherry Point, NC, and the contract is subject to DPAS priority rating. Waivers and deviations require formal approval from the DSC Contracting Officer, and all supplies must be traceable through DART for airworthiness parts.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXTEN
Solicitation # SPE7L1-26-T-906Y
The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-11KG
The contract is for a single plain hexagonal nut with NSN 5310-01-719-0720, to be delivered within 20 days of award under solicitation SPE4A6-26-T-11KG, with a response deadline of August 11, 2026. The item is subject to multiple technical and compliance requirements including CMMC Level 2 certification for the supplier, adherence to DLA packaging standards, and mandatory removal of government identification from non-accepted supplies. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting its disclosure or transfer to foreign persons anywhere in the world, including foreign nationals employed by U.S. firms; DFARS 252.225-7048 governs this restriction. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The procurement falls under NAICS code 332722 and is managed by the Department of Defense’s ASC Commodities Division, with performance to occur in Mechanicsburg, Pennsylvania. All requirements referenced by R or I numbers are derived from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SL
Solicitation # SPE4A0-26-T-4149
The contract is for the procurement of two self-locking, slotted hexagon nuts designated by NSN 5310-00-047-2394 and part number MS21225-6, supplied in accordance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The nuts are classified as a critical application item and must conform to the non-government standards NASM21225 Rev 3, NASM25027 Rev 1, and MIL-DTL-32258. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with strict acceptance criteria—zero non-conformances required unless otherwise specified—where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adheres to DLA packaging guidelines. The items must be delivered within five days FOB origin to the Naval Air Station North Island in San Diego, California, with no variance allowed in quantity. Shipping must be conducted via traceable freight, not parcel post, using the provided freight address and contact information. The contract number is SPE4A0-26-T-4149, the required delivery date is December 8, 2025, and the supplier is obligated to meet all government quality and identification requirements, including removal of government identifiers from non-accepted supplies and physical marking of the bare item.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-11JY
The contract pertains to the procurement of a single plain hexagon nut with NSN 5310-01-675-4516 under solicitation SPE4A6-26-T-11JY, with a delivery requirement of 20 days after delivery order. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, which must be accessed online and applied per the revision in effect on the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in the sample unless otherwise stated. The item is subject to cybersecurity maturity model certification level 2 requirements, and the contractor must be a certified C3PAO. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export control training, and approved DLA questionnaire responses. The place of performance is Mechanicburg, PA, and primary point of contact is Myonka Boyd of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7LX-26-U-9152
The contract is for 5,827 self-locking hexagonal nuts with NSN 5310-01-657-3289, sourced under solicitation SPE7LX-26-U-9152, which is a Total Small Business Set-Aside for NAICS code 332722. Delivery is required within 57 days on a FOB origin basis with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. Packaging must adhere to RP001 DLA Packaging Requirements, with palletization specifically controlled under those guidelines. The unit of issue is each, and the contract specifies a total price based on a unit price with the quantity provided. Documentation for source approval, configuration changes, and variance requests must follow the referenced DLA processes including RC001, RQ002, and the requirement for a Request for Variance when deviations are proposed. The item is flagged as a Critical Application Item, and DLA direct delivery within the Continental U.S. is confirmed. The point of contact for inquiries is Theodore Misiolek at the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-11JV
The contract pertains to the procurement of two flat washers with NSN 5310-01-669-1413, issued under solicitation SPE4A6-26-T-11JV by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days to the Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking standards without special markings. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Attributes are to be classified with verification levels or AQLs as defined, and the manufacturer may choose attribute or variable inspection methods. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all items must be marked per MIL-STD-130N in addition to manufacturer details. The unit of issue is each, and shipment must be sent by the fastest traceable means, excluding parcel post. The supplier, Fastenal Company, is identified by part number 1133207, and the delivery must be completed no later than July 28, 2026.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11KA
The contract pertains to the procurement of a single screw, cap, socket head with NSN 5305-01-605-7016, under solicitation SPE4A6-26-T-11KA, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days of award, and responses must be submitted by August 11, 2026. The item is subject to stringent DLA packaging and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, which incorporates referenced standards identified by R or I numbers. The supplier must comply with specific non-conformance handling protocols, including the removal of government identification from rejected items and proper physical marking of bare parts. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be classified with designated verification levels or AQLs. The place of performance is Annville, Pennsylvania, with a NAICS code of 332722 and point of contact listed as Myonka Boyd, providing email and phone for direct inquiries.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 332112
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A1-26-T-2507
This contract specifies the procurement of a close-tolerance bolt identified by NSN 5306-01-508-6784 and part number NAS6604-128, with a requirement for 30 units to be delivered within 169 days under FOB origin terms and zero quantity variance. The item is classified as a commercial item and must comply with the current revision of the applicable non-government standard NAS6603 through NAS6620, Revision 11 dated December 31, 2025, as well as other referenced technical documents including MIL-STD-130N for identification marking and SYSTEM 22 of FED-STD-H28/20 for dimensional inspection of Class 3A and 3B threads, excluding small threads and self-locking nuts. All manufacturing and quality controls are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for tailored quality requirements, physical identification, and removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs corresponding to critical, major, and minor classifications. Packaging must adhere to ASTM D3951 and MIL-STD-129 with palletization per DLA’s RP001, and all documentation including the Certificate of Quality Compliance must be provided as specified in the Technical Data Package. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for late delivery, and inspection and acceptance occur at the destination. The contract references multiple revisions of quality assurance provisions and CDRLs, with mandatory compliance to DLA requirements overriding all other standards unless explicitly superseded by contract amendments.
Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, SPRING
Solicitation # SPE4A1-26-T-2511
The contract pertains to the procurement of four retainer springs with NSN 1650-01-046-2272 under solicitation SPE4A1-26-T-2511, with a delivery requirement of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling is to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. No data is currently available, and the alternate offeror must submit a complete data package including details for both the approved and alternate part. The solicitation is issued by the Department of Defense’s Aviation Supply Chain, with Allison Hugel as the primary point of contact, and responses are due by August 11, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, OUTP
Solicitation # SPE4A1-26-Q-0099
The contract specifies the procurement of 662 units of a Shaft Assembly, Output, identified by NSN 2925-01-179-2648 and manufacturer part number 3501614-3 from Honeywell International Inc. The item is classified as a Commercial Item and a Critical Safety Item (CSI) with a critical application, requiring strict adherence to specified dimensional tolerances on the output shaft’s forward end design and torsion rod diameter. Quality assurance is governed by SAE AS9100 for both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin in accordance with MIL-STD-1916 or ASQ H1331, using zero-defect acceptance criteria unless otherwise stated. All items must be marked per MIL-STD-129 with lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements. The contract mandates compliance with DLA’s master list of technical and quality requirements, Cybersecurity Maturity Model Certification Level 2 self-assessment, and documentation for source approval, while explicitly stating that Item Unique Identification is not required per DFARS 252.211-7003. The procurement is under a Firm Fixed Price contract with no variance allowed in quantity, and delivery is due 247 days after the date of award. The delivery point is Origin, and the shipping destination is DLA Distribution Cherry Point, North Carolina. The item has no shelf life requirement and is subject to all applicable defense information and cybersecurity controls. The solicitation number is SPE4A1-26-Q-0099, posted on August 3, 2026, with responses due by August 10, 2026, issued by the Department of Defense’s Aviation Supply Chain under a federal acquisition framework. All waivers or deviations must be approved by the DSC Contracting Officer, and measuring and test equipment must meet specified standards. The unit of issue is each (EA), with pricing details to be filled in at award.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THR
Solicitation # SPE4A1-26-T-2509
The contract specifies the procurement of a stud with continuous thread, identified by NSN 5307-01-533-6085 and part numbers 95412A597 and STC5618X4, for delivery to a U.S. military installation in Camp Humphreys, South Korea. A single unit of issue (FV) is required with strict zero variance allowance, and delivery must be completed within ten days of award under FOB origin terms. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, MIL-STD-129, and DLA’s stricter Packaging Requirements for Procurement (RP001), including palletization and labeling as specified. The unit of issue is standardized under DoD guidelines, and all items must be marked per DLA’s Physical Identification and Bare Item Marking requirements (RQ017) with government identification retained unless rejected. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Configuration changes require formal engineering change proposals, and any deviations must be formally requested. The contract references the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, and compliance with these requirements is mandatory. The solicitation number is SPE4A1-26-T-2509, with a response deadline of August 11, 2026, and delivery is required no later than July 28, 2026, under a government-funded project.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A1-26-T-2510
The contract pertains to the procurement of 34 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number FX10-1540-4TS and NSN 5325-00-907-1085, supplied by ALCOA GLOBAL FASTENERS INC based in Simi Valley, CA. All items must comply with MIL-STD-130N for identification marking of U.S. military property as specified, and the procurement is governed by DLA Packaging Requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The delivery is required within 118 days after award, and the place of performance is designated as Tracy, CA with a zip code of 95304-5000. The solicitation number is SPE4A1-26-T-2510, issued under NAICS code 332510, and was posted on August 3, 2026, with responses due by August 11, 2026. Primary point of contact is Jade Stringfield of the Department of Defense’s Aviation Supply Chain, reachable via email and phone listed in the contract data. Government identification must be removed from any non-accepted supplies in accordance with RQ011 requirements.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A1-26-T-2506
The contract pertains to Production Lot Testing for four units identified by NSN 0001S00000062, under Purchase Request 7017695781, with a delivery requirement of 282 days after award. The solicitation number is SPE4A1-26-T-2506, issued by the Department of Defense's Aviation Supply Chain through the Defense Logistics Agency, with performance located at Cherry Point, North Carolina, 28533-5040. Contractors must prepare a Production Lot Test Report clearly labeled with the contract and lot/item numbers, and present it to the Quality Assurance Representative for review. All shipments of test reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documents, a copy of the contract or order, all actual test results and tolerances from the technical data package, material and process certifications, process operation and inspection method sheets, and the drawings used to manufacture the test sample, properly marked if public disclosure or government use beyond the specified purpose is to be restricted. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and is classified under NAICS code 332722, with Jade Stringfield as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: NA
New
DIBBS
Subcontract Opportunity Decomposition UnavailableA subcontract opportunity has been posted under the Aviation Supply Chain division of the Department of Defense with a posting date of August 2, 2026, and a response deadline of August 10, 2026. The solicitation number is unavailable, and the North American Industry Classification System code is listed as NA, indicating incomplete or unassigned industry classification. No set-aside type or description is provided, and details regarding the organization type and point of contact are missing. The place of performance is listed as FPO with a ZIP code of 96672, suggesting a military post office location. The prime contract details could not be retrieved due to a configuration error, which has prevented the decomposition of the opportunity into any sub-opportunities. The procurement is accessible through a public link on the DIBBS system, but no further procedural or technical specifications are available within the provided data.

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 531070
New
DIBBS
Packaging, Labeling, and Shipping LogisticsThe contract requires the proper packaging, labeling, and shipment of precision bolts to the DLA Distribution Depot in New Cumberland, Pennsylvania, with strict adherence to MIL-STD-129 standards for labeling and logistical documentation. All materials must be conditioned and secured to ensure integrity during transport and meet military-grade specifications for handling and storage. The contractor must also implement WAWF-compatible invoicing procedures to ensure seamless financial processing and compliance with Department of Defense financial systems. The work falls under NAICS code 531070, indicating it is a subcontract tied to transportation and warehousing logistics for defense supply chains, and the response deadline is August 10, 2026, with the solicitation posted on August 2, 2026. Performance is specifically assigned to the New Cumberland location, with a ZIP code of 17070-5002, and the contracting organization is part of the Aviation Supply Chain under the Department of Defense.

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance and Labeling ServicesThe contract calls for the development and submission of hazard warning labels and Safety Data Sheets (SDS) for non-exempt materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. This work is critical for maintaining regulatory adherence in the handling, transportation, and use of hazardous materials within the Department of Defense supply chain. The deliverables must meet all technical and formatting requirements prescribed by federal safety standards to accurately communicate chemical hazards and protective measures to personnel and emergency responders. This is a subcontract under the NAICS code 541690, issued by the Aviation Supply Chain division of the Department of Defense, with a performance location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and proposals are due by August 10, 2026. The contract focuses on specialized technical services related to hazardous material compliance, requiring expertise in chemical classification, regulatory interpretation, and label design. All submitted materials must be accurate, complete, and aligned with current federal regulations to support safety and operational continuity across defense logistics operations.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Machine Bolt Manufacturing and SupplyThe contract pertains to the manufacture, packaging, labeling, and delivery of ten precision machine bolts identified by NSN/Part Number 5306-01-417-5781, with strict adherence to MIL-SPEC standards and regulatory compliance including the Berry Amendment and ITAR/EAR requirements. All work must be performed in full alignment with U.S. defense procurement mandates, ensuring that materials and production processes originate domestically and meet stringent export control protocols. The components are critical to military aviation systems and must be produced under controlled conditions to guarantee dimensional accuracy, material integrity, and traceability from raw material to final delivery. The contract is classified as a subcontract under the NAICS code 332112 and is issued by the Department of Defense through the Aviation Supply Chain office, with performance required at a designated facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. While no set-aside designation is specified, all bidders must demonstrate capability in meeting federal defense manufacturing standards and provide evidence of compliance with export control laws and domestic sourcing mandates. Delivery timelines, packaging specifications, and labeling protocols will be closely scrutinized to ensure seamless integration into military logistics systems.
Nonferrous Forging

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract solicitation SPE4A1-26-T-2504 is for the procurement of 25 units of a BOLT, HOOK with NSN 5306-01-503-9383, at a unit price of $25.00, for a total contract value of $625.00. Delivery is required within 20 days after order placement, with a specified original delivery date of July 27, 2026, and the item must be delivered FOB destination to USS MAKIN ISLAND LHD 8 at FPO AP 96672. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under applicable sampling standards, primarily MIL-STD-1916 or ASQ H1331, requiring acceptance of the entire sample lot with no defects unless otherwise directed. All packaging must adhere to ASTM D3951 and be palletized per DLA’s RP001, while labeling and marking must strictly follow MIL-STD-129, including 2D Data Matrix barcodes, with Government identification removed from non-accepted items per RQ011 and bare item marking required per RQ017. The DLA Master List of Technical and Quality Requirements supersedes all other specifications, including ASTM D3951, and mandates compliance with critical, major, and minor attribute classification levels. The item must be shipped using traceable freight methods, not parcel post, and transportation details must comply with DLAD PROC NOTES C19 and C20. The supplier, MCMASTER-CARR SUPPLY COMPANY, is identified by part number 98760A109, and the contract requires full compliance with applicable FAR and DFARS clauses including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium under 252.223-7008, restrictions on covered telecommunications equipment under 252.204-7018, and compliance with hazardous material labeling per 29 CFR 1910.1200 and DFARS clauses. Offerors must possess a valid Unique Entity ID and CAGE code, self-certify their small business status if applicable, and disclose any joint ventures. Invoicing must be submitted through WAWF, and the contract includes clauses addressing
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2505
The contract pertains to the procurement of 10 machine bolts with NSN/Part Number 5306-01-417-5781 under solicitation SPE4A1-26-T-2505, issued by the Department of Defense through the Aviation Supply Chain office. The delivery is due within 192 days after order, and responses must be submitted by August 10, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by DLA. DFARS 252.225-7048 governs compliance with these restrictions, which apply uniformly to all entities, including U.S. companies and their foreign subsidiaries. The point of contact for inquiries is Jade Stringfield, reachable via email or phone, with performance located in New Cumberland, Pennsylvania.
Nonferrous Forging

POSTED

1 day ago

DEADLINE

in 7 days
View Details