Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

GROMMET, NONMETALLIC

Active
SPE4A6-27-T-4756Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-4756 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of five nonmetallic grommets, identified by NSN 5325016168045 and Northrop Grumman part number 6D62110-001. The contract is managed under NAICS code 332722 and utilizes the First Destination Transportation program to optimize shipping costs. Delivery is required by October 31, 2027, with a need ship date of May 26, 2028, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The items are designated as critical application items, and the use of additive manufacturing is prohibited unless specifically approved by the Engineering Support Activity. Quality assurance is governed by ISO 9001:2015 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds. Payment processing is required through the Wide Area WorkFlow system. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.

General Info

DLA procurement of five nonmetallic grommets for delivery to New Cumberland by 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A6-27-T-4756

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
SHALONDA DAVIS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GROMMET,NONMETALLIC
GROMMET,NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
NORTHROP GRUMMAN SYSTEMS CORPORATION 90099 P/N 6D62110-001
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-27-T-4756
SECTION B
PR: 7018662346 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018662346 0001 EA 5.000
NSN/MATERIAL:5325016168045
DELIVERY (IN DAYS):0580
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/26/2028
SPE4A6-27-T-4756
SECTION B
PR: 7018662346 PRLI: 0001 CONT’D
Original Required Delivery Date:10/31/2027
SPE4A6-27-T-4756 NSN/Part Number: 5325-01-616-8045 Quantity: 5 EA Purchase Request: 7018662346QTY: 5 Delivery: 580 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-27-Q-0048
Solicitation SPE7L3-27-Q-0048 is a firm fixed price procurement issued by the DLA Weapons Support Land Supplier Ops Vehicle Spt for the supply of 132,000 units of preformed packing, identified by NSN 5330-01-538-4230. This is designated as a critical application item, and all supplied goods must be free of asbestos and class I ozone depleting chemicals. Delivery is required within 90 days after the date of order, with the shipping destination located in New Cumberland, Pennsylvania. Award will be based on best value, evaluating price, offered delivery, and past performance. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and compliance with export controls under ITAR and EAR via RQ032. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with palletization following RP001. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 23, 2026, via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
SLED
Supply of Mechanical Assemblies and FastenersThis subcontract focuses on the supply of critical mechanical hardware for prime contractors working on Southwest Ohio Regional Transit Authority transit vehicle projects. The scope of work includes the delivery of mechanical release assemblies, specifically inner release assemblies, as well as filter access gas springs for Gillig LF models and hex nylack nuts. All provided industrial fasteners and gas springs must strictly adhere to original equipment manufacturer specifications to ensure vehicle safety and functionality. The contract is categorized under NAICS code 332722 and is managed through the Ohio Inventory agency. Key administrative dates include a posting date of October 16, 2026, with a response deadline set for October 19, 2026. This agreement ensures that the necessary specialized components are available to support the maintenance and assembly of the regional transit fleet.
Inventory

POSTED

about 7 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
Federal
Specialized Screws, Nuts, and Washers ProductionThis subcontract involves the manufacture of high-specification fasteners for prime contractors supporting DLA Land and Maritime supply contracts. The scope of work includes the production of socket head cap screws, self-locking hexagon nuts, washers, and machine screws utilizing cold heading and thread rolling equipment. All production must strictly adhere to the BASIC QAP13873 QAP-B02 compliance standards to ensure the delivery of finished components that meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 16, 2026, with a response deadline of October 23, 2026. This procurement focuses on the delivery of critical hardware components, specifically targeting the production of items such as NSN 5305012111457 and NSN SS010014394309.
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
Federal
VACCO NSNs-Sole Source
Solicitation # CM26265595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26265595 to identify potential manufacturers for a variety of hardware components. The request focuses on identifying sources capable of producing items such as sleeve bushings, bearings, socket head cap screws, self-locking hexagon nuts, washers, fiberlocks, and quick release pins, as specified by a provided list of National Stock Numbers and part numbers. Interested parties must provide the manufacturer's location and point of contact information to Contract Specialist Carlos Oquendo by the response deadline of October 23, 2026. Companies seeking to be qualified as an Approved Source must apply through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. This process requires the submission of a technical data package to demonstrate that the prospective contractor can manufacture products of equal or superior quality to the Original Equipment Manufacturer. The responsibility lies with the contractor to document and prove their product's equivalence. All responses and completed market surveys should be submitted directly to the listed Contract Specialist.
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,HEXAGON
Solicitation # N0010426QFF19
This contract pertains to the procurement of hexagon nuts designated as SPECIAL EMPHASIS Level I material for use in critical shipboard systems, where failure could lead to catastrophic outcomes including loss of life or vessel. The nuts must conform to York drawing 366-59531 and be manufactured from QQ-N-286 material in annealed and age-hardened condition, with stringent requirements for traceability, chemical and mechanical testing, and nondestructive inspection. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be marked permanently using approved methods per MIL-DTL-1222 and MIL-STD-792, ensuring identification of manufacturer, material symbol, and unique heat-lot traceability. All certification data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) prior to shipment, approved by N39040, and accompanied by electronic notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, with no material allowed to ship without prior acceptance. The contract mandates adherence to ISO-9001 or MIL-I-45208 quality systems, with Government Quality Assurance at source, including inspections by DCMA and review of all test reports, which must be positive, unqualified, and directly tied to traceable marking on the material. Testing must be performed by approved labs for critical procedures like Slow Strain Rate Tensile Tests, and chemical and mechanical certifications must reflect actual properties post-fabrication, prohibiting transcription or ambiguous language. Internal threads must be cut, not cold-formed; threads must be inspected per FED-STD-H28, with System 21 as minimum unless otherwise specified. Mercury is strictly prohibited, and all packaging and handling must follow MIL-STD-2073. Delivery is capped at 365 days post-effective date, early delivery is permitted without cost, and the order is classified as DX/DO rated under DPAS for national defense priority. All subcontracting, waivers, and deviations require formal approval, and failure to comply with any requirement—including missing, incomplete, or improperly formatted certifications—will result in rejection of materials.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
BOLT,MACHINE
Solicitation # N0010426QFB96
This contract pertains to the procurement of a machine bolt, designated as a critical shipboard component classified under Special Emphasis material (Level I/SUBSAFE), requiring stringent quality and traceability controls to ensure safety and reliability. The bolt must conform to specific standards, including Parker drawing 600-992-688 and MIL-DTL-1222 for self-locking elements, with cadmium plating meeting QQ-P-416 requirements. Contractors are responsible for providing full traceability from raw material to finished product, including certifications for chemical and mechanical properties, non-destructive inspections, and hydrogen embrittlement relief treatments. A certificate of compliance must be submitted for each shipment, confirming adherence to all contractual and specification requirements. The contract enforces a rigorous inspection regime before Government acceptance, including sampling plans with zero defect tolerance and full documentation of all testing and quality assurance measures. Furthermore, the contract mandates compliance with ISO 9001 quality management systems or equivalent militarily recognized standards and requires Government Quality Assurance audits at the contractor’s facility. All deviations or waivers must be approved by the Contracting Officer and shared with the Government’s quality assurance representative. The bolt must be marked permanently in accordance with specified military standards to maintain complete traceability, and strict procedures are outlined for handling, storage, and inspection, including when Government Furnished Material is involved. Subcontractors are subject to quality oversight and regular audits to ensure product conformity. Delivery includes certification data submission via Wide Area Work Flow for review prior to shipment acceptance, with a maximum delivery schedule of 365 days from the contract effective date. The contract is a rated order under the Defense Priorities and Allocations System (DPAS), emphasizing national defense priority.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,ROUND
Solicitation # N0010426QFF34
This solicitation is for the procurement of Stem Retaining Nuts manufactured in accordance with NAVSEA drawing 6602371 and MIL-DTL-24252 specifications. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict quality control, quantitative chemical and mechanical analysis, and a formal certificate of compliance. The contract is a DO-rated order for national defense use, with a proposed final delivery window of 365 days after the effective date of the contract. The contractor must maintain a quality system compliant with ISO-9001 and provide a one-year warranty from the date of delivery. All certification data must be submitted and accepted via Wide Area Workflow (WAWF) prior to shipment. The solicitation is a combined effort for multiple related items, allowing for awards at the CLIN level to multiple vendors. Access to certain technical drawings requires a signed security agreement due to the inclusion of NOFORN and Naval Nuclear Propulsion Information.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332722
New
Federal
MAST BOLTS
Solicitation # N6660426Q0492
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting quotes under RFQ N6660426Q0492 for the manufacture of 1,250 Mast Bolts (Part No G770662-5) and associated material certifications. This unrestricted acquisition is being conducted on a Firm Fixed Price (FFP) basis and will be awarded to a single responsible offeror using the Lowest Price, Technically Acceptable (LPTA) evaluation method. Delivery is required F.O.B. Destination to Naval Station Newport, RI, with a base year delivery date of approximately November 2, 2026, and potential for four option years. To be determined technically acceptable, offerors must provide quotes valid for at least 30 days, prove past performance on similar work, and ensure all items are sourced directly from the OEM or authorized channels. Due to the Distribution D and Export Control designation of the technical drawings, access is strictly limited to offerors with an active Joint Certification Program (JCP) registration and an approved DD2345 form. Additionally, vendors must have an active NIST SP 800-171 assessment and a CMMC Level 2 self-assessment uploaded to the Supplier Performance Risk System (SPRS) module of the PIEE website. All contractors must be registered in the System for Award Management (SAM) prior to award. Offers are due by 11:00 a.m. EST on October 20, 2026.
Nuwc Division Newport

POSTED

about 9 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
NUT, HEX, HEAVY
Solicitation # N0010426QFG22
This contract is for the procurement of Heavy Hex Nuts designated as Special Emphasis Level I material, critical to the safe and reliable operation of shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must conform to Leslie Controls Drawing 36938N and ASTM-A194 Grade 2H or Grade 7, with stringent requirements for chemical and mechanical certification, traceability, and nondestructive testing using either liquid penetrant or magnetic particle inspection in accordance with T9074-AS-GIB-010/271 and MIL-DTL-1222. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be permanently marked with traceability identifiers per MIL-STD-792, including manufacturer and material symbols. Certification reports must be complete, unqualified, and directly linked to the physical part, with transcription explicitly prohibited. The contract mandates adherence to ISO-9001 or an approved alternate quality system, with Government Quality Assurance conducting inspections at the supplier's facility. All certifications and test data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) and reviewed and accepted prior to shipment, with no material allowed to be shipped without formal acceptance. The contract incorporates stringent controls for configuration management, requiring formal Engineering Change Proposals for any modifications affecting form, fit, function, or interface, and prohibits unauthorized deviations or waivers without prior written approval from the Contracting Officer. Material must be mercury-free, internal threads must be cut and not cold-formed, and packaging requirements exclude specific container types but mandate MIL-STD-129 labeling and thread protectors. The solicitation is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, indicating national defense priority. Subcontractors are subject to the same quality requirements as the prime, and the buyer is responsible for ensuring supplier capability through documented evaluation and audit procedures. Delivery must be completed within 365 days of contract effective date, with submission of certification data due no later than 20 days prior to scheduled delivery. Offers must not include quantity discounts across multiple CLINs to avoid unreasonably low award values, and the solicitation may result in multiple awards. The contract also enforces Buy American provisions, small business subcontracting obligations, and strict cybersecurity and data handling protocols under recent defense deviations and prohibitions.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332722
New
DIBBS
53--RETAINER,PACKING
Solicitation # SPE7L1-27-U-0087
Solicitation SPE7L1-27-U-0087 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of Packing Retainers, NSN 5330011760932, Part Number 2-43216-5. This procurement is a Total Small Business Set-Aside and may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual demand is 579 units, with a guaranteed minimum quantity of 86 units and an estimated two orders per year. The item is designated as a critical application item and must be manufactured in accordance with Basic Drawing NR 76823 2-43216, Revision F. Quotes must be submitted electronically via the DIBBS portal by October 30, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Delivery is required within 48 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor is required to use the Wide Area WorkFlow system for invoicing and must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. Additionally, the contract incorporates various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
SET SCREW
Solicitation # N0010427QBB20
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
SCREW,CAP,SOCKET HD
Solicitation # N0010426QFB13
This contract is for the supply of a Screw, Cap, Socket Head, identified by Vacco drawing S1E10064, part number V2C11114-16DZO, intended for use in a critical shipboard system where material failure could result in severe consequences including loss of life or damage to vital shipboard systems. The material specified for this item is SAE-AMS-5643 Condition H1025, and stringent quality assurance and traceability requirements are mandated due to the classification of the material as SPECIAL EMPHASIS (Level I). The contractor must provide full certification including quantitative chemical and mechanical analysis, liquid penetrant inspection, and thread inspections in accordance with specified military and industry standards. Traceability from raw material heat/lot numbers through processing to finished parts must be maintained, with marking requirements to enable identification of material grade and manufacturer. The contract enforces rigorous quality system standards conforming to ISO 9001, MIL-I-45208, and related calibration standards and requires government source inspection and acceptance prior to shipment. Certification data must be submitted electronically via the Wide Area Work Flow system to Portsmouth Naval Shipyard for review and acceptance before any shipments are made. The contract also includes provisions for configuration control, engineering change management, and strict handling of any deviations or waivers, which require review and approval by the contracting officer. Packaging and marking must comply with military standards. Additional clauses prohibit the use or contamination by mercury. Overall, the contract places heavy emphasis on ensuring material integrity, precise documentation, and quality control to meet military specifications for a critical safety item essential for naval applications.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

New
DIBBS
LIGHT, PANEL
Solicitation # SPE4A6-27-R-X061

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
CABLE ASSEMBLY, POWER, ELECTRICAL
Solicitation # SPE4A6-27-R-X069

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
LIGHT ASSEMBLY, INDICATOR
Solicitation # SPE4A6-27-R-X064

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
SETSCREW
Solicitation # SPE4A6-27-Q-0117

POSTED

about 4 hours ago

DEADLINE

in 16 days
View Details
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-27-R-X076

POSTED

about 4 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-27-T-4651
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
59--CABLE ASSEMBLY,SPECIAL
Solicitation # SPE4A6-27-T-4905
Solicitation SPE4A6-27-T-4905 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of special purpose electrical cable assemblies, NSN 5995014632524. The requirement consists of two lines, with the primary line calling for 18 units to be delivered to Industries of the Blind Inc. within 284 days after order. All quotes must be submitted electronically via DIBBS by October 23, 2026. The procurement falls under NAICS code 334419 and requires compliance with ISO 9001:2015 quality standards. Key technical and administrative requirements include First Article Testing for two samples in accordance with Drawing 12465333 and MIL-HDBK-831. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific hazard labeling required for any hazardous materials per 29 CFR 1910.1200. Inspection and acceptance will occur at the origin. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity certification.
Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335220
New
DIBBS
Specialized Electrical Component SupplyThis subcontract for Specialized Electrical Component Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves providing specialized wiring and connectors to prime contractors, with all materials sourced according to TDP Rev A Gen 2 and Drawing NR 30554 series. The contractor is responsible for delivering raw materials and connectors to the assembly manufacturer and providing necessary certifications of compliance for all components. Strict adherence to the Buy American Act and Berry Amendment is required for all supplied materials. The project is associated with NAICS code 335220 and is designated for performance at Fort Leonard Wood. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.
Major Household Appliance Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with TDP Rev A Gen 2 and Drawing NR 30554 04-40199, with specific requirements for wiring and termination based on the DLA Master List. Quality assurance and marking must adhere to MIL-STD-1916 and MIL-STD-129 standards, respectively, and the contractor must maintain compliance with DFARS 252.204-7012. The project is categorized under NAICS code 335999 and will be performed at Fort Leonard Wood. The scope of work concludes with the delivery of fully completed and tested cable assemblies. Interested parties should note the response deadline of October 23, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332812
New
DIBBS
Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
Manufacture of Solid Rivets (NSN 5320-00-638-9059)This subcontract involves the manufacture of solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of rivets according to standards NASM20426, NASM5674, and drawing NR 13873 EI-006389059, utilizing precision cold-heading or machining equipment. A total of 4 lbs of finished rivets must be delivered, packaged in accordance with ASTM D3951 and MIL-STD-129, with performance taking place at Tinker AFB. Qualified providers must hold SAE AS9003 or ISO 9001 quality certification and ensure full compliance with the Buy American Act and the Berry Amendment. The use of additive manufacturing is strictly prohibited for this contract. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement under NAICS code 332994.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical pump components, specifically three sleeve bearings, ensuring full compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Technical requirements include the application of preservation method 33, cleaning and drying method 1, and the use of G8 wrap material, utilizing specialized military-grade marking equipment. The completed deliverables are to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 23, 2026.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS