Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

GROUNDWATER DEVELOPMENT PROJECT CONSTRUCTION OF THE BUSHARD STREET WATER WELLS

Active
10001-2State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Newport Beach is soliciting bids for the construction of two new potable water supply wells—the Bushard Deep Well and the Bushard Shallow Well—at 17902 Bushard Street in Fountain Valley, California. The project aims to enhance the city’s municipal drinking water supply by tapping into underlying aquifer systems, with targeted production rates of 3,000 gallons per minute for the deep well and 1,000 gallons per minute for the shallow well, contingent on aquifer availability. All construction specifications and technical parameters are detailed in the accompanying Technical Specifications and Special Provisions, while the precise site boundaries and well locations are outlined in Exhibit A, Figure A1. Bidders must submit an original sealed bid bond equal to ten percent of their bid amount to the City Clerk prior to the bid opening date, and all responses must be submitted electronically; hard copies will not be accepted. The City assumes no responsibility for delays or errors caused by technical failures, printing inaccuracies, or failure to submit complete electronic documents. The solicitation, identified as 10001-2, was posted on July 29, 2026, with a mandatory submission deadline of September 1, 2026, at 5:00 PM. Electronic versions of the plans, specifications, and bid documents are available for download, and bidders are cautioned that any errors resulting from printing or incomplete submissions are their sole responsibility. Bid results will be made publicly available immediately after the bid opening through PlanetBids, and members of the public may attend the reading at the City Clerk’s Office located at 100 Civic Center Drive, Newport Beach, California. The primary point of contact for inquiries is Ben Davis of the Public Works Department, reachable by phone or email.

General Info

Newport Beach seeks bids for two water wells with 3,000 and 1,000 GPM capacity, electronic submission required, bid bond due September 1, 2026.

Agency

California → Public Works Department of City of Newport BeachView Agency

NAICS

237110 - Water and Sewer Line and Related Structures ConstructionView NAICS

Place of Performance

100 Civic Center Drive, Newport Beach, CA 92660, CA, US

Set-Aside

NONE

Documents

(4)

C-10001-2 Technical Specifications for Bushard Street Water Wells

PDFtechnical-specifications

Contract 10001-2 Special Provisions for Bushard Street Water Wells

PDFspecial-provisions

C-10001-2 Notice Inviting Bids for Bushard Street Water Wells

PDFifb

Contract C-10001-2 Groundwater Development Project

PDFcontract-document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

Contract opportunity posted

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → Public Works Department of City of Newport Beach
Contacts1 person available
OfficeCA, US
Organization / Agency
California → Public Works Department of City of Newport Beach
View Agency Profile
Office AddressCA, US
Contacts

Full Description

Show more
Scope: The purpose of this project is to provide the City of Newport Beach with two new potable water-supply wells, to be designated as the Bushard Deep Well and Bushard Shallow Well (new wells). Both new wells are located at 17902 Bushard Street, Fountain Valley, California (Site). The purpose of constructing these new wells is to serve as municipal water supply wells to augment current drinking water supplies. General construction conditions for the proposed new wells are described in these Special Provisions, whereas the construction parameters are detailed further in the accompanying Technical Specifications.
The locations of the proposed new wells and the boundaries of the Site are shown in Exhibit A, Figure A1, “Well Site Location Map.” The targeted operational production rates for the new wells are 1,000 and 3,000 gallons per minute (GPM) for the Bushard Shallow Well and the Bushard Deep Well, respectively, if available from the aquifer systems intercepted by each well.
Please see the Special Provisions for the full scope of services.
Notes: ORIGINAL SEALED COPY OF BIDDERS BOND MUST BE SUBMITTED TO THE CITY CLERK PRIOR TO BID OPENING DATE. All responses for this Bid are due at or before the time shown on each Notice Inviting Bids. Late responses will not be accepted. Hard copy responses of Submittals WILL NOT be accepted. The City is not responsible for and accepts no liability in the event a response is late due to any network, internet, or any other technical problem or interruption. Electronic PDF files of the plans, specifications and bid documents are available. The City is not responsible for any errors that may occur from the printing of any of these documents by bidders, including, but not limited to: scaling issues, print quality, failure to print and submission of all required documents. The Bid Results are immediately available to the public via PlanetBids following the Bid Opening Date (Bid Due Date). Members of the public who would like to attend the reading may go to the City Clerk’s Office (Located at 100 Civic Center Dr, Newport Beach, CA 92660)
Bid Bond: 10.00%

Similar Contracts

Same NAICS industry code

NAICS: 237110
New
SLED
1947 Watermain - North Bound Airport Expressway PreservationThe Port of Seattle through its Aviation Project Management Group is preparing to restore the integrity of a 1947 water main located along the northbound Airport Expressway using cured-in-place pipe (CIPP) technology under a Design-Bid-Build procurement model. This project aims to rehabilitate the aging infrastructure without extensive excavation, employing modern lining methods to extend the service life of the water main while minimizing disruption to surrounding traffic and facilities. The work will focus on improving water system reliability and compliance with current standards, addressing potential leaks, corrosion, or structural weaknesses in the century-old管道. The solicitation is forecasted for release with a posting date of July 29, 2026, and is classified under NAICS code 237110 for Water and Sewer Line and Related Structures Construction. The primary point of contact for inquiries is Moraa Omwega, with Ray Moreno serving as Project Manager, both reachable through the Port of Seattle. All work is expected to be performed at the specified location along the Airport Expressway, and interested parties should monitor the official port portal for the formal solicitation release, bidding requirements, and submission deadlines. No set-aside provisions are indicated at this stage, and the project will likely be open to qualified contractors with demonstrated experience in CIPP installation and municipal water main rehabilitation.
Aviation Project Management Group

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 237110
New
SLED
Colorado River Aqueduct Canal Liner Rehabilitation Mile Marker 24.77 to 60.45
Solicitation # 20260728055
The Metropolitan Water District of Southern California is soliciting bids for the rehabilitation of the Colorado River Aqueduct canal liner between mile markers 24.77 and 60.45 in Los Angeles, California. The scope of work includes removing deteriorated sealant from concrete joints, abrasive blasting surfaces to achieve an 80-grit texture, and applying new sealant with proper backup material and primer, all while adhering to strict safety protocols for hazardous materials such as asbestos, lead, and PCBs. Work must comply with ASTM C1193, Cal/OSHA regulations, and ANSI standards, with inspections performed by the Engineer at both origin and destination before final site acceptance. All materials must be delivered in sealed, labeled containers with complete documentation, including batch numbers, AMS-STD-595A color codes, and hazard classifications, and stored under controlled temperature and environmental conditions. The contract is structured as a fixed-price arrangement with a base mobilization cost of $600,000, and additional unit-priced repair items subject to adjustment if quantities deviate beyond 75% or 125% of estimated values. Awards will follow the Lowest Price Technically Acceptable methodology, with no trade-offs permitted between price and technical merit. Bidders must submit electronically via the PlanetBids portal by 2:00 p.m. on August 25, 2026, using required forms including bid proposals, bonding documents, and transmittal letters, with hard copies submitted in triplicate if required. Compliance with safety and environmental regulations is mandatory, including submission of an Injury and Illness Prevention Program, site-specific safety plans, confined space entry procedures, and hazard communication documentation. Contractors must hold valid certifications if claiming Small Business Enterprise or Disabled Veteran Business Enterprise status, and all parties must comply with non-use of third-party intellectual property, audit rights, and record retention obligations. No contract options, key personnel designations, or security clearance requirements are specified, and no formal accounting codes or invoicing systems like WAWF are referenced.
The Metropolitan Water District of Southern California

POSTED

1 day ago

DEADLINE

in 26 days
View Details
NAICS: 237110
New
SLED
Corydon Well Replacement Project
Solicitation # C2305
The Corydon Well Replacement Project is a federally funded initiative by the Elsinore Valley Municipal Water District (EVMWD), supported by a $2,260,788 grant from the U.S. Department of the Interior’s Bureau of Reclamation under CFDA 15.507, aimed at replacing the existing Corydon Well and integrating it into the broader Backbasin Groundwater Blending and Treatment Schematic. The project spans from August 29, 2024, to September 30, 2027, with final reporting due within 120 days after completion, and involves two distinct phases: Phase 1 focuses on the design and abandonment of the existing well in alignment with Riverside County and California State Water Resources Control Board standards, while Phase 2 encompasses the full architectural, mechanical, electrical, and instrumentation design for the new well, including testing and commissioning. All work must comply with the Buy America Act, 2 CFR Part 200, and applicable environmental regulations including NEPA and CEQA, with engineering deliverables requiring signature by a licensed professional engineer. Performance is to be executed on-site at 31642 Corydon Street, Wildomar, CA, with formal acceptance administered by the Bureau of Reclamation upon review of final documentation submitted electronically via GrantSolutions or FAReporting@usbr.gov. Contract administration is governed by a Professional Services Agreement and requires strict adherence to federal procurement standards, including full compliance with the System for Award Management (SAM), a valid Unique Entity ID, and avoidance of prohibited foreign-made telecommunications and surveillance equipment under Section 889. Offerors must submit a comprehensive proposal through the PlanetBids Vendor Portal by September 1, 2026, including certifications on debarment status, lobbying activity, American Iron and Steel usage, conflict of interest, Iran Contracting Act compliance, and a detailed list of Disadvantaged Business Enterprise subconsultants with justification for any non-selection. Insurance requirements, whistleblower protections, drug-free workplace policies, and prohibitions on distracted driving are mandatory, and key personnel substitutions require prior written approval. Payment processing is strictly through the Department of Treasury’s ASAP system, with checks payable to the Bureau of Reclamation and referencing the award number and ASAP account number. No CLINs or detailed line-item pricing are provided, but budget allocations for salaries, fringe benefits, and contractual costs are accounted for within the total approved funding. All contract modifications must be in writing and
EVMWD

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 237110
New
International
Elk Ridge Water Treatment Plant Upgrade Construction
Solicitation # 2026-RVER-003
The Resort Village of Elk Ridge is seeking qualified General Contractors to undergo a prequalification process for the construction of upgrades to its raw water well pumping system and the expansion of the existing water treatment plant. This initiative is part of a two-stage procurement process, with the first stage focusing solely on prequalifying contractors based on their demonstrated experience in constructing, commissioning, and starting up similar water treatment and raw water pumping infrastructure. Only those who meet all mandatory criteria and submit complete documentation via the online Bids and Tenders system by 2:00 p.m. CST on August 12, 2026, will be considered. Submissions received after the deadline or lacking required elements will be rejected. All inquiry submissions must be made in writing by email, with a cutoff date of 4:00 p.m. CST on August 5, 2026, and no inquiries received after this time will be addressed. The project’s documentation becomes available on July 21, 2026, through the Bids and Tenders website. This project is partially funded by the Government of Saskatchewan under the Investing in Canada Infrastructure Program, requiring full completion by March 31, 2028. Technical questions may be directed to Andrew Bueckert via phone or email, while general inquiries should be addressed to Michele Bonneau. The solicitation number is 2026-RVER-003, and the project is being managed by the Resort Village of Elk Ridge under the Saskatchewan Public Sector. Bidders must access all information and submit responses exclusively through the specified online portal, and no alternative submission methods will be accepted. Failure to comply with procedural requirements will result in disqualification regardless of experience or capability.
Resort Village of Elk Ridge

POSTED

1 day ago

DEADLINE

in 13 days
View Details

More opportunities from California → Public Works Department of City of Newport Beach

Same awarding agency

NAICS: 541211
New
SLED
Prevailing Wage and Labor Compliance ManagementThe contract requires comprehensive administration of payroll and reporting for all on-site labor to ensure full compliance with California Labor Code Sections 1770 et seq., specifically governing prevailing wage requirements on public works projects. This includes accurate calculation and payment of wages, fringe benefits, and overtime in accordance with prevailing rates established by the State of California, as well as the timely and precise submission of certified payroll records and related documentation. The work must be executed in alignment with state regulations to avoid penalties and maintain eligibility for public funding. The contract is structured as a subcontract under the Public Works Department of the City of Newport Beach in California, with a NAICS code of 541211 indicating classification under accounting, tax preparation, bookkeeping, or payroll services. Response submissions are due by September 1, 2026, at 5:00 PM, following a posting date of July 29, 2026. All labor compliance activities must be performed at the project site within California, with no specified location beyond the state boundary. The subcontractor is expected to manage these obligations without direct oversight from the agency, relying on established state guidelines and industry best practices to ensure legal adherence and operational integrity.
Offices of Certified Public Accountants

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332913
New
SLED
Supply and Installation of 4-inch Type-304L Stainless Steel Camera TubeThe contract requires the furnish and installation of a 4-inch inner diameter Type-304L stainless steel camera tube totaling 232 linear feet, specifically for use in well inspection and monitoring applications. The material specification ensures corrosion resistance and durability suitable for long-term subterranean or harsh environmental conditions, with the installation scope encompassing proper placement and secure integration into the existing well infrastructure. The work is governed under a subcontract arrangement with a NAICS code of 332913, indicating it falls within the Other Fabricated Metal Product Manufacturing category, typically involving precision fabrication and assembly of custom metal components. The solicitation was posted on July 29, 2026, and responses must be submitted by September 1, 2026, at 5:00 PM. The contracting entity is the Public Works Department of the City of Newport Beach in California, and the place of performance is within the jurisdiction of this agency, though exact site details are not specified. Bidders must be prepared to meet stringent material and installation standards to ensure the camera tube functions reliably in underground monitoring systems, with compliance to industry best practices for stainless steel piping systems assumed as part of the technical requirements. All proposals must be submitted through the designated online portal prior to the deadline.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332913
New
SLED
Supply and Installation of 2-inch Type-304L Stainless Steel Sounding TubeThe contract calls for the supply and installation of a 2-inch inner diameter Type-304L stainless steel sounding tube, totaling 212 linear feet, to be used for well monitoring purposes. The material specification requires Type-304L stainless steel, known for its corrosion resistance and suitability for long-term subsurface applications, ensuring durability and reliability in environmental monitoring scenarios. The work involves both furnishing the specialized tubing and its proper installation, indicating a turnkey responsibility for the vendor to deliver, handle, and mount the system according to technical and safety standards. Issued as a subcontract under NAICS code 332913, which categorizes metal fabricated product manufacturing, the solicitation is managed by the Public Works Department of the City of Newport Beach in California. The opportunity was posted on July 29, 2026, with a firm deadline for responses set for September 1, 2026, at 5:00 PM. The contract does not specify a set-aside designation, and no point of contact or detailed place of performance information is provided beyond the jurisdictional authority. Interested parties must review the detailed requirements through the provided online portal to ensure full compliance with technical, scheduling, and documentation expectations.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details