Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Group 3 Uncrewed Aircraft System (UAS) Supply and Integration

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply and integration of production-ready Group 3 Uncrewed Aircraft Systems tailored for military operations including reconnaissance, surveillance, target acquisition, electronic warfare, and strike missions. These platforms are intended to be fully operational and mission-ready, supporting a broad spectrum of tactical objectives across diverse environments. The solicitation is structured as a subcontract under the Department of Defense, with the agency identified as W6QK Acc-Rsa, and is governed by the NAICS code 334511, indicating classification within the Aircraft and Parts Manufacturing sector. The response deadline for this opportunity is set for August 3, 2031, allowing for a multi-year window to submit proposals and execute integration efforts. While details such as location, point of contact, and set-aside status are not specified, the emphasis is on delivering systems that meet stringent military standards for reliability, interoperability, and real-time performance. The contract aims to enhance operational capabilities through advanced UAS technology, ensuring readiness for high-stakes defense missions with minimal logistical overhead. No geographic restrictions or special eligibility provisions are noted, suggesting the opportunity is open to qualified industrial partners capable of scaling production and deployment.

General Info

Supply of mission-ready Group 3 UAS for military reconnaissance, surveillance, and strike missions under DoD subcontract.

Agency

Department Of Defense → W6QK Acc-RsaView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

AL

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc-Rsa
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and integrate production-ready Group 3 UAS platforms for military missions including reconnaissance, surveillance, target acquisition, electronic warfare, and strike operations.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M1-26-U-4951
This contract is for the procurement of a thermostatic switch, identified by NSN 5930006177161 and part numbers 052-115907-000 and 222-10NL2221176, under solicitation SPE7M1-26-U-4951. The quantity requested is 17 units at a unit price of $17.00, with delivery required within 56 days FOB origin. The item is classified as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supply, except for specific authorized uses such as functional components in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; portable devices containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization shall adhere to DLA packaging guidelines. The contract is subject to a zero percent quantity variance, and inspection and acceptance occur at the destination. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by August 19, 2026, and is managed by the Department of Defense’s Maritime Supply Chain under the primary point of contact Bryan Fair.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
GUIDE, SPRING
Solicitation # SPE4A6-26-T-11TJ
The contract pertains to the procurement of seven GUIDE, SPRING units with NSN 5865-00-895-4139 under solicitation SPE4A6-26-T-11TJ, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, and the item is classified as a commercial item, including commercial of a type, which influences compliance and documentation standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Mandatory documentation includes source approval requests, adherence to DLA packaging standards, tailored quality requirements for both manufacturers and non-manufacturers, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Measuring and test equipment must meet specified standards, and sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The alternate offeror must provide a complete data package inclusive of details for both the approved and alternate parts, as no data is currently available. The place of performance is Robins AFB, Georgia, and inquiries should be directed to Emma Garrett at emma.garrett@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
TRANSDUCER, SONAR
Solicitation # SPE4A6-26-T-12CB
This contract is for the procurement of a sonar transducer, identified by part number ITC-3167C and NSN 5845-01-527-8836, with a total quantity of three units to be delivered FOB origin within 171 days of contract award. The item is classified as a critical application and is subject to stringent technical, quality, and packaging standards. All requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA-specific guidelines, including marking per MIL-STD-129, with no special marking required. The transducer must be free of intentional mercury or mercury-containing compounds except for specific exempted uses such as functional batteries, fluorescent lamps, sensors, or naval-specified reagents, with portable mercury-containing devices requiring double containment and shockproof design per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and source approval documentation must be submitted per RC001. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation follows DLA procedural notes C19 and C20. The contract is a total small business set-aside under NAICS 334511, with the original required delivery date of December 31, 2026, and a need ship date of January 31, 2027.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
OPTICAL SUBASSEMBLY
Solicitation # SPE4A7-26-T-613M
The contract is for the procurement of nine optical subassemblies under solicitation SPE4A7-26-T-613M, with a total small business set-aside and a delivery deadline 171 days after award. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with controls tied to the solicitation or award date depending on acquisition size. The item is subject to stringent cybersecurity and export controls, requiring the vendor to be CMMC Level 2 certified and compliant with ITAR or EAR regulations, including restrictions on disclosure of technical data to foreign persons or entities, even within the U.S. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access controlled technical data. Physical marking of the item must conform to RQ017, and non-accepted supplies must have government identification removed per RQ011. Packaging must adhere to DLA specifications, and sampling follows MIL-STD-1916 or a comparable zero-defect plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Configuration changes require formal engineering change proposals, and all documentation for source approval requests must meet RC001 standards. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance and delivery directed to New Cumberland, Pennsylvania, and primary point of contact is Jessica Gentry.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 541611
New
Federal
Organizational Conflict of Interest (OCI) Mitigation PlanningThe contract requires the development of organizational conflict of interest (OCI) mitigation plans aligned with Federal Acquisition Regulation (FAR) 9.5 to address potential conflicts arising from vendors with prior advisory roles or dual responsibilities as both integrators and suppliers. These plans must be comprehensive, clearly defined, and designed to ensure impartiality and fairness in government contracting by preventing any undue advantage or influence that could compromise the integrity of procurement processes. The mitigation strategies must be tailored to each vendor’s specific history and role, incorporating structural, procedural, and information controls to isolate sensitive data and decision-making functions. This subcontract is issued under the NAICS code 541611, indicating it pertains to management consulting services, and is tied to the Department of Defense through the agency designation W6QK Acc-Rsa. The solicitation was posted on August 4, 2026, with a response deadline of August 3, 2031, providing a five-year window for submission and performance. While no specific place of performance or point of contact is listed, the work is expected to support defense procurement integrity across all relevant locations. The absence of a set-aside designation suggests the contract is open to all qualified entities, with emphasis on technical compliance and robust OCI mitigation frameworks rather than socioeconomic preferences.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 541611
New
Federal
Supply Chain Verification and Compliance ServicesThe contract requires the performance of comprehensive supply chain verification services to ensure adherence to National Defense Authorization Act provisions, specifically Sections 848, 817, and 1821, which mandate the exclusion of certain compromised telecommunications and video surveillance equipment sourced from designated foreign adversaries. The work involves conducting detailed audits of the entire supply chain, verifying the origin of all components, and producing accurate Bill of Materials and Software Bill of Materials documentation to demonstrate full compliance with federal security requirements. This effort is critical to safeguarding defense-related systems from potential threats posed by embedded hardware or software from prohibited entities. The contract is structured as a subcontract under the Department of Defense, identified by the agency name W6QK Acc-Rsa, and falls under the NAICS code 541611 for management consulting services. It has a long performance window with a response deadline extending through August 3, 2031, indicating a multi-year engagement that may involve phased deliverables or ongoing compliance monitoring. The place of performance and point of contact details are not specified, suggesting flexibility in execution location but requiring the contractor to coordinate effectively with the agency to meet reporting and verification obligations. Compliance is non-negotiable and must be maintained continuously throughout the contract term.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 334512
New
Federal
UAS Mission Payload Development and SupplyThe contract requires the design, supply, and integration of modular mission payloads for Group 3 unmanned aerial systems, with a focus on electro-optical and infrared sensors, signals intelligence modules, electronic warfare suites, and communications relay systems. These payloads must be compatible with existing UAS platforms and engineered for rapid deployment, interoperability, and mission adaptability across diverse operational environments. The work involves both developmental engineering and production-scale manufacturing, ensuring that each payload meets rigorous performance, reliability, and environmental standards for military use. The contract is structured as a subcontract under the Department of Defense, managed by the W6QK Acc-Rsa office, with a response deadline extending through August 3, 2031, indicating a long-term commitment to capability development. The North American Industry Classification System code 334512 confirms the scope centers on electronic manufacturing for navigational, measuring, electromedical, and control instruments, aligning with advanced sensor and communications systems. All work is expected to occur in support of DOD operational requirements, though specific performance locations are not detailed, allowing flexibility in manufacturing and integration facilities. The open-ended timeline suggests ongoing iterations and potential future modifications as mission needs evolve.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 332911
New
Federal
Pre-Solicitation Synopsis for Overhaul of the Hydraulic Valve
Solicitation # W58RGZ-26-B-0024
The U.S. Army Contracting Command - Redstone Arsenal is conducting market research to identify qualified sources capable of overhauling the Hydraulic Valve with NSN 4810-01-096-1056 and P/N 70652-02450-109 for the UH-60 Black Hawk helicopter. This effort seeks to determine industry interest and technological readiness ahead of a potential five-year, Firm-Fixed-Price, Indefinite Delivery Indefinite Quantity contract with estimated annual quantities ranging from a minimum of 40 units to a maximum of 232 units, including up to 32 units for Foreign Military Sales. The procurement may be set-aside entirely or partially for small businesses, or awarded through full and open competition based on responses to this notice, with the applicable NAICS code being 332911 and a small business size standard of 750 employees. Interested parties must submit a capabilities statement of no more than ten pages in 10-point font or larger, presented in bullet format, demonstrating ability to perform the overhaul with supporting documentation on organizational capacity, personnel qualifications, and any planned subcontracting or teaming arrangements. Submissions must include organizational details such as name, address, primary and secondary points of contact, website, phone, and ownership type, and must be emailed as a Word or PDF file to the designated Contract Specialist by 12:00 p.m. Central Daylight Time on July 28, 2026, with the synopsis number included in the subject line. This is not a solicitation, no funds are available for response preparation, and no obligation is incurred by the government to award a contract. All submitted information marked as proprietary will be protected, and classified material must not be included. Responses will not be returned or acknowledged, and no feedback will be provided to participants.
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Call for Solutions - Enterprise Transformation Capability for the Army's Organic Industrial Base (OIB)
Solicitation # PANRSA26P0000034783
The Army Contracting Command - Redstone Arsenal is issuing a Call for Solutions under the Army Open Solicitation W9128Z-25-S-A002 to establish a Government-owned Enterprise Industrial Transformation Capability for the Organic Industrial Base (OIB), aligned with the 2026 National Defense Strategy’s goal to supercharge the U.S. Defense Industrial Base. This initiative seeks a vendor-neutral, solution-agnostic partner to engineer and institutionalize repeatable, enterprise-wide methodologies that enable synchronized modernization across the OIB, addressing the current fragmentation in investments and lack of coherent decision-making frameworks. The contractor will not implement solutions or assume decision-making authority; instead, they will develop advisory tools, analytical models, and transformation roadmaps to empower the Government to make informed, strategic choices regarding industrial base modernization, with all foreground intellectual property delivered with Government Purpose Rights or Unlimited Rights. The procurement is structured as a Firm Fixed Price Indefinite Delivery, Indefinite Quantity (IDIQ) contract with a $50 million ceiling over five 12-month ordering periods, and the Government retains full authority over policy, prioritization, investment, and operational decisions. Submission is limited to a Phase 1 Solution Brief of no more than five pages or fifteen slides, excluding the title page and Organizational Conflict of Interest (OCI) analysis, which must be submitted separately and is mandatory for all offerors. The OCI requirement includes a detailed analysis of actual or potential conflicts, with a mitigation plan if conflicts exist, and imposes a strict prohibition on awardees or their subcontractors from competing for any subsequent implementation contracts derived from their advisory work. Offerors must be registered in SAM.gov with an active Unique Entity ID and comply with CMMC Level 2 cybersecurity requirements for handling Controlled Unclassified Information, though facility clearances are not required for award. Invoicing must be processed through Wide Area Work Flow, and proposals must be submitted via email by the revised deadline of August 4, 2026, at 5:00 PM Eastern Standard Time. Evaluation focuses on Technical Merit, Schedule, and Viability, with selection based on a trade-off process that prioritizes technical excellence and long-term sustainability over price, and the contract administration is managed by the Redstone Arsenal contracting office with no DCAA accounting system required due to the fixed-price nature of the award.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Onboarding of Group 3 UAS
Solicitation # W58RGZ-26-S-C001-0008
The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
Combined Sources Sought and Notice of Intent to Award a Sole-Source Contract for the Procurement of up to Twelve (12) AH-64E Aircraft
Solicitation # W58RGZ-26-C-0002P00100
The U.S. Army Contracting Command - Redstone Arsenal, on behalf of the Apache Attack Helicopter Project Management Office, is conducting market research while simultaneously notifying the public of its intent to award a sole-source contract to The Boeing Company for the procurement of up to twelve AH-64E Apache attack helicopters. This effort, to be incorporated under contract W58RGZ-26-C-0002, spans a 53-month period and includes the remanufacture of the aircraft, management of critical electronic component obsolescence, redesign, qualification, and full lifecycle support. Boeing is identified as the sole entity with the proprietary data, technical expertise, and manufacturing infrastructure required to produce the AH-64E, as the government lacks a complete production-level Technical Data Package and rights to essential proprietary information. Despite the intent to proceed with a sole-source award under FAR 6.103-1, all responsible entities are invited to submit a voluntary capability statement of no more than ten pages demonstrating their ability to meet the technical, logistical, and production demands of the program. Submissions must be sent electronically to the designated contracting officer and specialist by August 19, 2026, and while they will be considered for market research purposes, they do not constitute a solicitation, nor will costs incurred in response be reimbursed. The contract action is not subject to any set-aside, and the final decision to proceed remains entirely at the government’s discretion.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336411
New
Federal
Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories
Solicitation # W58RGZ-26-S-C001-0007
The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336414
New
Federal
Next Generation Counter-Small UAS Missile (NGCM)
Solicitation # PANRSA-26-P-040123
The U.S. Army is seeking industry input on a Next Generation Counter-Small Unmanned Aircraft System Missile (NGCM) to enhance capabilities against Group 2 and Group 3 small drone threats through extended range, rapid launch, and reduced time-to-target. The initiative aims to develop a missile system capable of engaging targets beyond 16 kilometers at 6 kilometers altitude and up to 25 kilometers at 8 kilometers altitude, with a launch response time under five seconds from operator initiation. The missile must integrate seamlessly with the existing Coyote Launcher and compatibility with the IBCS-M architecture and multiple radar systems including KuRFS, Sentinel A3/A4, LTAMDS, PATRIOT, and TPQ-53, using an all-weather RF seeker. Production costs must not exceed $150,000 per unit at a volume of 5,000 missiles, and the system must achieve Technology Readiness Level 7 by the end of FY2027, with 50 units ready for Operational Assessment by the first quarter of FY2028. Development includes full design documentation, simulation tools, and performance analysis to support integration and testing under the Army’s C-UAS architecture. Vendors are invited to submit an unclassified Capabilities Brief, not exceeding ten pages, detailing their proposed solution, technical specifications, integration approach, security compliance, and supporting services such as engineering, field support, training, logistics, data analytics, and cybersecurity. Proposals must demonstrate compliance with NISP standards, including a Secret-level facility clearance and personnel with Secret clearance and COMSEC access, along with adherence to zero-trust and encryption protocols for both U.S. and Foreign Military Sales applications. All submissions must be in PDF format with a one-slide quad chart appendix and must include proper markings for proprietary or sensitive data. Responses are due by August 20, 2026, submitted via email to the designated contracting representatives, with no telephonic inquiries accepted. Participation is voluntary, non-binding, and at the vendor’s expense; the government reserves the right to use responses for planning purposes only and is under no obligation to proceed with procurement. Information submitted becomes government property and may be shared with non-government advisors under NDA, with protections for confidential commercial data under applicable federal statutes.
Guided Missile and Space Vehicle Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541715
New
Federal
Closed-Circuit Wind Tunnel (24-inch test)
Solicitation # PANRSA-26-P-0000-037658
The U.S. Army Contracting Command-Redstone is conducting market research through a Request for Information to identify capable vendors for the procurement of a closed-circuit wind tunnel to be installed at the Army Primary Standards Laboratory in Redstone Arsenal, Alabama. This specialized facility is intended for use by USATA Engineers and Technicians to support high-precision calibration activities using a Laser Doppler Velocimetry system, which requires the generation of extremely low air velocities down to 0.15 meters per second with a turbulence intensity under 1 percent. The wind tunnel must feature a 24-inch by 24-inch test section with optical-quality glass sidewalls to accommodate a 532-nanometer, 500-milliwatt argon-ion laser, and include seven sealable instrument ports that accept probes ranging from 4.3 to 15.9 millimeters in diameter. A 3/8-inch Swagelok bulkhead fitting upstream of the test section is required for the introduction of Bis(2-ethylhexyl) subacute seed particles, and the test section must include grooves at approximately 90 percent of its length to allow installation of adjustable nozzle restriction plates. A 15-inch section of the test area located six inches upstream of these plates must be replaceable without compromising the integrity of the wind tunnel circuit. The system must have a centrifugal fan with vibration isolation, driven by a variable-frequency drive controlled exclusively through LabVIEW software with no wireless or internet connectivity, and must operate at a maximum speed of approximately 50 meters per second while maintaining the specified turbulence criteria. The entire system, including all associated components, must not exceed 32 feet in length, 8 feet in width, or 7.5 feet in height. Design proposals must include validated quantitative analysis, such as computational fluid dynamics simulations, to demonstrate that all performance requirements are met. The solicitation number is PANRSA-26-P-0000-037658, and responses are due by July 15, 2026, to be submitted via email to designated Army contracting personnel. This is strictly a market research effort under FAR 15.201(e) and does not constitute a solicitation for contract award; no contract value, delivery schedule, or payment information has been established at this stage. Respondents are required to provide their CAGE code, Unique Entity Identifier, business size classification according to NAICS code 54
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

in 2 days
View Details