This Combined Synopsis/Solicitation opportunity was posted on April 28, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

GSO - dehumidifier

Closed

PR5239073Federal

Submission Closed05/15/2016, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333413

New

Federal

41--FAN,VANEAXIAL, IN REPAIR/MODIFICATION OF

Solicitation # N0010424RJC57

This solicitation seeks repair services for the FAN, VANEAXIAL with a required Repair Turnaround Time (RTAT) of 177 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract is firm-fixed-price, with payment instructions tied to Navy systems and mandatory Government Source Inspection. Contractors must quote unit and total prices, explicitly state their RTAT, and if unable to meet the 177-day requirement, provide documentation of capacity constraints. The repair must conform to specified technical standards including MIL-STD-130 Rev N for marking and manufacturer’s technical orders, with no substitutions allowed without written approval from the NAVICP-MECH Contracting Officer. Any deviation from the RTAT results in a price reduction per unit per month, capped at a specified maximum, without limiting the Government’s right to terminate for default. Items determined beyond repair may qualify for a negotiated T&E fee not to exceed a set amount. The solicitation mandates compliance with Buy American provisions, small business subcontracting requirements, and safeguarding of sensitive defense materials. Contractors must be authorized distributors of the original manufacturer and provide proof thereof. Documentation references include multiple military standards and DoD directives, all obtainable through designated government sources. The contract requires detailed recordkeeping for inspections for 365 days post-delivery and adherence to packaging standards per MIL-STD-2073. Freight is FOB Origin, and delivery is handled by Navy CAV or Proxy CAV. The offer due date has been extended to July 6, 2026, with no other modifications. The item’s CAGE code and reference numbers are specified, and contractors must compare the repair price to the cost of a new unit, including new unit lead time. All work must be performed at the awardee’s facility, with inspection and acceptance occurring under government oversight.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

High-velocity floor fans

Solicitation # W0107-275644

The Department of National Defence, specifically the Personnel Support Programs Fitness and Sports Department for Garrison Petawawa, is soliciting offers for the procurement of ten industrial, portable, high-velocity floor fans. The requirement consists of six Type I fans with diameters between 6 and 7 feet and four Type II fans with diameters between 8 and 9 feet. All units must be pre-assembled, OSHA-compliant, and meet CSA and Canada Electrical Code requirements. Technical specifications mandate a minimum air velocity of 200 fpm covering a distance of 80 to 100 feet, with a maximum noise level of 75 dBA. The successful contractor is responsible for the delivery, unloading, unpacking, and placement of the fans at the Dundonald Hall Fitness, Sports and Aquatic Centre in Petawawa, Ontario, under DDP Incoterms 2020. The contract period runs from the date of award until March 31, 2027, which also serves as the final delivery deadline. This solicitation is open only to Canadian Suppliers and Suppliers of an Applicable Trading Partner. Award will be granted to the compliant offer with the lowest evaluated price, with a 10 percent price reduction applied for evaluation purposes to compliant offers from Canadian Suppliers who submit the required Canadian Content Attestation Form. Proposals must be submitted electronically and divided into technical, financial, and declaration sections. Packaging must be protective and environmentally friendly, utilizing reusable, returnable, or recyclable materials whenever possible.

Department of National Defence

POSTED

DEADLINE

HVAC Equipment SupplyThis subcontract for HVAC Equipment Supply involves providing specialized hardware and components to prime contractors for Oregon Department of Transportation facility projects based in Portland. The scope of supply includes air handling units, boilers, chillers, decentralized units, sensors, transmitters, and control valves. The supplier is required to provide all necessary equipment and technical performance data sheets to ensure project compliance. A critical requirement of the agreement is that all supplied products must be current manufacturing models. Additionally, the supplier must guarantee the availability of spare parts for a period of five years following delivery. The solicitation was posted on October 19, 2026, with a response deadline of November 4, 2026.

POSTED

DEADLINE

BLOWER UNIT, AIR FILTER

Solicitation # SPE8E5-27-Q-0031

Solicitation SPE8E5-27-Q-0031 is a firm fixed price contract issued by the DLA Troop Support Construction and Equipment office for the procurement of 53,000 blower units for air filtering respirators, identified by NSN 4240-01-655-6330. The award will be based on the best value offer determined by the total award price, including both production and First Article Test (FAT) costs. Delivery is scheduled for 240 days after award for the primary units, with a separate 100-day delivery window for specific line items. Inspection and acceptance are conducted at the origin, with the final delivery destination being the DLA Distribution facility in New Cumberland, Pennsylvania. This procurement is designated as Chemical Biological Defense Equipment and carries stringent quality and security requirements. Contractors must adhere to CMMC Level 2 certification and safeguard covered defense information. Technical compliance is governed by specific reference drawings and Quality Assurance Provisions, with a strict prohibition on the use of class I ozone depleting chemicals. The contract requires rigorous testing, including First Article Testing and Production Lot Testing, and mandates military packaging and marking in accordance with MIL-STD-2073-1 and MIL-STD-129. Additionally, the contract incorporates Buy American and Balance of Payments Program regulations and requires the use of the Wide Area WorkFlow system for all electronic invoicing and payment requests.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E7-26-T-4032

Solicitation SPE8E7-26-T-4032 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment for the procurement of one vaneaxial fan, identified by NSN 4140-01-623-1906. This procurement is designated as a total small business set-aside under NAICS code 333413. The required delivery date is September 8, 2025, with a delivery timeframe of five days after order. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the SWRMC MAC-MO facility in National City, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Specific compliance is required for palletization under RP001 and documentation for source approval requests under RC001. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal and defense acquisition regulations, including Buy American Act compliance, cybersecurity safeguarding under DFARS 252.204-7012, and hazardous material labeling standards.

Defense Logistics Agency

POSTED

DEADLINE

FAN ASSEMBLY, CENTRIFUG

Solicitation # SPE8E7-27-T-0111

Solicitation SPE8E7-27-T-0111 is a total small business set-aside issued by DLA Troop Support, Construction and Equipment for the procurement of one centrifugal fan assembly, part number XP55722400015 (72582), NSN 4140124075914. The requirement is categorized under NAICS code 333413. Delivery is specified as FOB Origin with a need ship date of March 28, 2027, and an original required delivery date of November 19, 2027. The item is to be delivered to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Compliance with the Buy American Act, the Berry Amendment, and various DFARS regulations regarding covered defense information and export-controlled items is required. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0122

Solicitation SPE8E7-27-T-0122 is a fixed-price contract issued by DLA Troop Support, Construction and Equipment for the procurement of seven tubeaxial fans, NSN 4140-00-289-8826. These critical application items must operate at 115 volts AC, 60 Hz, single phase, and comply with MIL-PRF-18953. A Qualified Products List applies, requiring the manufacturer to be QPL approved at the time of contract award. Technical requirements are further governed by TDP Rev A Gen 1 and reference drawing 75477 FF16085 Revision E. The contract specifies a delivery timeframe of 195 days, with a need ship date of May 3, 2027, and a required delivery date of August 27, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-F-18953 and MIL-STD-2073-1E, with marking per MIL-STD-129 and palletization per RP001, while avoiding plastics for wrapping or cushioning where possible. Administrative requirements include the use of Wide Area WorkFlow for invoicing and receiving reports. Offerors must be registered in the System for Award Management and comply with NAICS code 333413. The contract incorporates several federal regulations, including FAR 52.246-1 for destination inspection, DFARS 252.204-7012 for safeguarding covered defense information, and various domestic material restrictions such as the Buy American Act and the Berry Amendment. Additionally, the use of additive manufacturing for these parts is prohibited unless specifically authorized.

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0118

Solicitation SPE8E7-27-T-0118 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one vaneaxial fan, identified by NSN 4140015048311 and Howden American Fan Company part number A30A4W6/TP. The acquisition falls under NAICS code 333413 and is being conducted via the First Destination Transportation program with terms set as FOB Origin. The original required delivery date is September 30, 2026, with a delivery window of five days after order. Due to the critical nature of the shipment, it is designated as RDD 999/NMCS and must be sent via the fastest traceable means to the Aegis Component Equipment Warehouse in Pascagoula, Mississippi. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Additionally, the contractor must comply with various federal regulations, including the Buy American Act, DFARS safeguarding of covered defense information, and prohibitions against trafficking in persons. All quotes must be submitted electronically through the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electric Water Heaters (NSN 4410-01-410-7983)This small business set-aside subcontract involves the supply of 13,000 electric water heaters matching NSN 4410-01-410-7983 for prime contractors working on Department of Defense procurement projects via DLA Troop Support. The contractor is responsible for delivering all units to designated DLA locations within 88 days after the order is placed. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the provider must comply with all DFARS regulations regarding prohibitions on covered semiconductors and Chinese military companies.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Custom Air Handling Unit (AC-3) FabricationThis subcontract agreement involves the design, manufacture, and delivery of a custom-built AC-3 Air Handling Unit for the State University of New York. The unit is specifically engineered to meet university specifications and must accommodate existing path of travel constraints at the Science II facility located at Binghamton University. The project falls under NAICS code 333413 and is intended for prime contractors managing facility projects. The solicitation was posted on October 19, 2026, with a response deadline set for November 9, 2026.

State University of New York (SUNY)

POSTED

DEADLINE

FAN, E, TERNAL, MOTOR

Solicitation # SPE8E7-27-T-0215

Solicitation SPE8E7-27-T-0215 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for the supply of one external motor fan, identified by NSN 4140000672590 and General Dynamics-OTS, Inc. part number 153B1836G1. The requirement is designated for delivery to the USS COMSTOCK LSD 45 with a required delivery date of October 13, 2026, and a delivery lead time of 20 days after receipt of order. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RC001 for source approval documentation. Packaging must comply with MIL-STD-129 and ASTM D3951, though DLA master requirements take precedence. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS cybersecurity and safeguarding standards for covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

GE BOOTH WATER RESOURCE RECOVERY FACILITY (WRRF) THERMAL OXIDIZATION UNIT 2 (TOX2) AIR POLLUTION CONTROL DEVICE (APCD) PREPURCHASE, PROJECT 42-0613

Solicitation # 2026-468P

The Region of Peel is seeking a qualified vendor for the prepurchase of Air Pollution Control Device (APCD) equipment for the GE Booth Water Resource Recovery Facility Thermal Oxidization Unit 2, identified as Project 42-0613. This procurement, solicitation number 2026-468P, is conducted in accordance with CETA, CFTA, and other applicable trade agreements. The scope of work encompasses the supply, delivery, and commissioning of the equipment, including performance testing and the provision of comprehensive operations and maintenance data. Equipment must be ready for delivery by Q4 2027 on an FOB Destination basis to either the facility or a designated warehouse in the Greater Toronto Area. The selection process follows a staged evaluation totaling 100 points, consisting of a pass/fail compliance review, a technical proposal weighted at 70 points with a minimum threshold of 42, a financial proposal at 20 points, and a Domestic Supply Chain Plan at 10 points. Bidders must submit electronic proposals in PDF format by November 11, 2026, including mandatory uploads such as technical attributes, installation lists, resumes for project managers and technicians, and a detailed work plan. Acceptance of the equipment is contingent upon successful delivery, installation, and the completion of a 14-day continuous operating period. Vendors are also required to adhere to strict packaging and marking standards and comply with Ontario and Canadian privacy legislation.

Region of Peel

POSTED

5 days ago

DEADLINE

in 21 days

General Info

Agency

N/A

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

Place of Performance

KENT, WA, 98031, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 28

Combined Synopsis

Response DeadlineMay 15

Deadline has passed

Submission Closed

05/15/2016, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts2 people available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Theresa LiangProcurement Agent

contact@example.gov

GZ ProcurementGuangzhou Procurement

contact@example.gov

Full Description

To Prospective Quoter, The U.S. Consulate General in Guangzhou invites you to submit a quotation for 115 EA dehumidifer (model #: DEC200, brand: De'longhi). Voltage shall be with 220 volts. If you intend to submit a quotation, you should notice that items shall be with equal specification or higher performance, there is no preferenc to specific brand. Equivalent product will also be considered. We would like to have the order be delivered to the following address: Receiving Office Lincoln Moving and Storage 8420 S. 190th St. Kent, WA 98031 Please submit your quotation before 16:00 p.m., May 15th, 2016 (Beijing Time). Should there be any shipping cost, please show in the quotation. If you have questions regarding the RFQ, please let me know. Thanks! Kind regards, Theresa Liang American Consulate General Guangzhou Procurement Office Tel: 8620 3814 5121

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS