Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GUARD, SWITCH

Active
SPE7M0-26-T-036YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a Guard, Switch with NSN 5930-01-585-4640, under solicitation SPE7M0-26-T-036Y, with a required delivery within five days of award. The item must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adheres to MIL-STD-129 and RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware unless explicitly exempted for functional uses such as specified batteries, lamps, sensors, or weapons systems, in which case portable devices must include a secondary containment and be shockproof per NAVSEA 5100-003D. The product must be shipped FOB origin, packaged according to hazardous material guidelines if applicable, and marked with the unit of issue and quantity per unit pack as specified. Shipment must be dispatched using traceable freight methods, not parcel post, and delivered to the designated military logistics center at Fort Bliss, Texas. The delivery is non-negotiable with a zero percent quantity variance, and inspection and acceptance occur at destination. The contract reference includes specific supplier part numbers from multiple vendors, indicating approved sourcing, and requires compliance with all DLA logistical and labeling protocols. The solicitation was posted in August 2026 with a response deadline in the same month, and the point of contact is Laurie Wassmuth of the Department of Defense’s Maritime Supply Chain ESOCA.

General Info

Procure one Guard, Switch NSN 5930-01-585-4640, deliver in five days to Fort Bliss, no mercury, comply with DLA and MIL-STD packaging.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

BLDG 23015 REDBALL EXPRESS, FORT BLISS, TX, 79918-0000, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-036Y for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Laurie Wassmuth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GUARD,SWITCH
GUARD,SWITCH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
WESTRAC EQUIPMENT PTY LTD Z02C9 P/N 246-4311
WILLIAM ADAMS PTY LTD DBA Z8Q46 P/N 246-4311
HASTINGS DEERING (AUST) PTY LTD ZF912 P/N 246-4311
CATERPILLAR INC 11083 P/N 2464311
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017804118 0001 EA 1.000
NSN/MATERIAL:5930015854640
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7M0-26-T-036Y
SECTION B
PR: 7017804118 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
MARKFOR
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
M/F: (TCN) W90HDC51350065
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
SPE7M0-26-T-036Y
SECTION B
PR: 7017804118 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:05/19/2025
SPE7M0-26-T-036Y NSN/Part Number: 5930-01-585-4640 Quantity: 1 EA Purchase Request: 7017804118QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-15BB
This contract is for the procurement of 28 units of electrical insulation sleeving, identified by NSN 5970-99-652-3468. The requirement specifies parts from Indra Sistemas, Tyco Electronics Raychem GmbH, or Tyco Electronics UK Ltd. Delivery is required within 43 days after the order, with a need ship date of September 8, 2025, and an original required delivery date of December 13, 2026. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract allows for no quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M2-26-Q-0738
This contract is for the procurement of seven distribution boxes, identified by NSN 6110-01-571-7654 and part number 0457-6028 from Kongsberg Maritime Inc. The delivery is required within 161 days after the order is placed, with the final destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The solicitation is set aside for Service-Disabled Veteran-Owned Small Businesses. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, MIL-STD-129 marking, and NAVAIR aircraft launch and recovery equipment traceability. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and ensure all bare item markings include the contract number, NAWC CAGE, and part number.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-15BM
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
Federal
ARMOUR T-LINE HARDWARE RESTOCKThe Western Area Power Administration, under the U.S. Department of Energy, has issued a forecast for a hardware restock requirement under the ARMOUR T-LINE HARDWARE RESTOCK solicitation, targeting small businesses as part of an SBA set-aside program. The North American Industry Classification System code 335932 indicates the procurement relates to other electrical equipment and component manufacturing, suggesting the need for specialized electrical hardware components, likely for infrastructure maintenance or upgrades. The place of performance is specified as Nebraska, and the opportunity is designed to support small business participation through designated set-aside provisions. Two Small Business Program Managers, reachable via tetrault@wapa.gov and setzel@wapa.gov, serve as the primary points of contact for inquiries regarding this forecast. Although no solicitation number or exact award date is provided, the posting date of August 10, 2026, indicates this is a forward-looking acquisition forecast intended to prepare vendors and ensure small business readiness. The lack of detailed location or organizational office information suggests this is a preliminary notice, with additional procurement details expected to follow in a future formal solicitation. Potential vendors should monitor official channels for updates and ensure their business classifications align with the SBA small business criteria for NAICS code 335932.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
LINE HARDWARE & 345KV CORONA RINGSThe Western Area Power Administration, under the Department of Energy, has issued a forecast for line hardware and 345kV corona rings anticipated for procurement in the near future. The procurement is classified under NAICS code 335932, which pertains to other electrical equipment and component manufacturing, indicating the specialized nature of the products required. Although no solicitation number has been assigned and the contract type remains a forecast with no set-aside designation, the document signals an upcoming opportunity for suppliers capable of meeting high-voltage transmission system standards. The place of performance and specific delivery locations are not yet defined, suggesting the scope may span multiple sites within the agency’s service territory. Contact for small business inquiries is designated to two program managers, both affiliated with the Small Business Program, with email addresses provided for direct communication. The forecast was posted in August 2026 and is accessible through the Department of Energy's public acquisition portal, indicating transparency and planned engagement with potential vendors. Interested parties, particularly small businesses, are encouraged to monitor the official listing for updates as the procurement process advances toward formal solicitation. The emphasis on 345kV corona rings suggests critical infrastructure upgrades are planned to enhance the reliability and efficiency of high-voltage transmission lines.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
ELECTRICAL HARDWARE STOCK REPLENISHMENTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for electrical hardware stock replenishment targeting small business set-asides as defined by the SBA. The procurement is classified under NAICS code 335932, which corresponds to other electrical equipment and component manufacturing, indicating the need for specialized electrical components and hardware. The contract is intended to support the replenishment of stock for operational requirements, with the primary place of performance located in Georgia. While the solicitation number is not yet available and detailed office address information is pending, the procurement is expected to be awarded to small businesses through the SBA’s small business programs. Two Small Business Program Managers are listed as points of contact for inquiries, both reachable via email at tetrault@wapa.gov and setzel@wapa.gov. This forecast announcement serves as an early indicator of upcoming acquisition activity and is posted for industry awareness ahead of formal solicitation release.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
ELECTRICAL HARDWARE STOCK REPLENISHMENT FOR CHEYENNE WAREHOUSE, MONTROSE WAREHOUSE, AND BISMARCK WAREHOUSEThe Western Area Power Administration, under the Department of Energy, has forecasted a procurement for electrical hardware stock replenishment to support three warehouses located in Cheyenne, Montrose, and Bismarck. This opportunity is designated as a small business set-aside under NAICS code 335932, indicating it is reserved for small business concerns. The solicitation has been posted as a forecast with a publication date of August 10, 2026, and while no formal solicitation number has been assigned yet, interested small businesses should prepare for an upcoming release. Although the place of performance is listed as Wisconsin, the actual work will involve supplying and managing inventory across the three specified warehouse locations. The Small Business Program Managers at tetrault@wapa.gov and setzel@wapa.gov serve as the primary points of contact for inquiries and additional information regarding this anticipated procurement.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
Electrical Equipment Shelf Manufacturing
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
SHELF, ELECTRICAL EQ
Solicitation # SPE4A7-26-T-637Q
The contract is a Request for Quotation for a single shelf unit designated as Electrical Equipment, identified by NSN 5975-01-612-8067, with a delivery requirement of 116 days ADO, targeting a shipment to Albany, Georgia. The item must be manufactured and delivered in full compliance with the detailed technical specifications outlined in Basic Drawing NR 01365 09021A1023, Revision NR dated October 8, 2012, and the associated TDP Rev A Gen 2 documentation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions labeled by 'R' or 'I' numbers incorporated by reference. Packaging and labeling must adhere to MIL-STD-2073-1E and MIL-STD-129, with defined packaging codes and preservation methods including QUP 001, PRES MTHD 10, and CLNG/DRY 1, and no special marking code is required. The unit must be palletized per RP001 DLA Packaging Requirements, and any hazardous materials must be labeled in accordance with 29 CFR 1910.1200. All items containing radioactive materials above specified thresholds must also be clearly marked per the latest MIL-STD-129 revisions. The solicitation mandates strict compliance with numerous Defense Federal Acquisition Regulation Supplement clauses, particularly those related to cybersecurity, export controls, and supply chain integrity. DFARS 252.204-7012 requires safeguarding of covered defense information and cyber incident reporting, while DFARS 252.240-7997 enforces NIST SP 800-171 assessment requirements with a deviation. Export-controlled technical data is subject to ITAR or EAR regulations under DFARS 252.225-7048, restricting access to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and been vetted by DLA. Failure to meet this certification will result in disqualification. Destination inspection is required under FAR 52.246-2, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with acceptable quality levels of 0.1, 1.0, and 4.0 for critical,
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE4A6-26-T-14SJ
The contract is for the procurement of one electrical insulation sheet, part number L100642.1, with NSN 5970-01-610-9757, supplied by OSHKOSH AEROTECH, LLC, under solicitation SPE4A6-26-T-14SJ. Delivery is required within five days of order receipt, FOB Origin, to the Freight Shipping Address at FRC Aviation Support Equipment, Building 105, Solomon MD 20688, with Parcel Post explicitly prohibited. The item must be delivered using the fastest traceable means available. The contract specifies detailed packaging and marking requirements: if hazardous per FED-STD-313, packaging must comply with TQ requirement IP025; if non-hazardous, commercial packaging per ASTM D3951 is required, though all DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. All packaging must be marked and labeled in accordance with MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Acceptance requires zero non-conformances if MIL-STD-105/ASQ Z1.4 is referenced. Inspection and acceptance occur at destination, with FAR 52.246-2 applying. The contract prohibits the use of additive manufacturing for this item and requires submission of a Safety Data Sheet meeting 29 CFR 1910.1200(g) and Federal Standard No. 313 prior to award. Compliance with the Buy American Act and Berry Amendment applies, with a $150,000 threshold. Cybersecurity obligations include DFARS 252.204-7012 for safeguarding defense information and DFARS 252.240-7997 for NIST SP 800-171 DOD assessment, with applicable deviations. Payment requires electronic submission via WAWF, and fast pay is not applicable
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
Federal
SAFRAN ELECTRICAL COMPONENT FORMERLY ICORE MALE PIPE THREADS.
Solicitation # N0040626Q0334
The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting Brand Name electrical components formerly manufactured by iCORE International Inc., specifically the Male Pipe Thread Swivel (AX0735-1224-SP) and EMP Conduit (CC261-24), to ensure compatibility with existing military systems. This requirement is a Total Small Business Set-Aside under NAICS code 335932, restricted to small business concerns, and issued under solicitation number N0040626Q0334. Only the Original Equipment Manufacturer or its authorized distributors may respond, with authorized distributors strongly encouraged to submit documentation proving their authorization. Quotes must cover the entire effort, as partial submissions will be deemed unacceptable, and are to be submitted via email to Contracting Officer Sara Robinson by July 7, 2026, at 10:00 AM local time, with the solicitation number included in the subject line. The award is expected in July 2026 and will be a firm, fixed-price contract based on a best-value determination considering technical capability, delivery date, price, and past performance, with no factor assigned relative weight. Offerors must be registered in the System for Award Management and comply with all applicable SAM, cybersecurity, and antiterrorism requirements. Items must meet ASTM-D-3951 packaging standards, prohibit specified packing materials, and comply with MIL-STD-130 and MIL-STD-129 for Unique Item Identification and shipping marking. Delivery is scheduled for July 24, 2026, to Yokosuka, Japan, under Government Origin (FOB) terms, with the Government arranging and paying for transportation through the NAVSUP WSS Shipment Processing office using the automated Ready-to-Ship form. Payment requests must be processed electronically through Wide Area WorkFlow, and acceptance occurs only upon verified receipt and confirmation that all packaging, marking, and labeling requirements are met at the destination.
Navsup Flt Logistics Ctr Puget Sound

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
SLED
146564 CONNECTOR, CONDUIT
Solicitation # 231366
The Los Angeles Department of Water and Power is soliciting bids for a 146564 Connector, Conduit under solicitation number 231366, with the opportunity posted on August 10, 2026, and a strict response deadline of August 17, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the electronic Request Solicit Procure (eRSP) system; hard copy or mail-in bids will not be accepted. The procurement falls under NAICS code 335932 and is classified as a SLED opportunity managed by the California Water & Power agency, with performance taking place in Los Angeles, California. Armando Aparicio is the designated point of contact for inquiries and can be reached at armando.aparicio@ladwp.com. Bidders are required to review the full bid document for all submission requirements and compliance details before submitting through the official portal linked in the solicitation.
Water & Power

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334419
New
DIBBS
ELECTRONICS COMPONE
Solicitation # SPE7M0-26-T-023Y
The contract solicitation SPE7M0-26-T-023Y calls for the procurement of an Electronics Components Set under a Firm Fixed Price arrangement, with a total contract value of $4.00 for two units at $2.00 each, delivered FOB Origin within five days of order issuance, with no tolerance for quantity variance. Delivery is directed to the Bahrain Defence Force Government Headquarters in Bahrain, with packaging, preservation, and marking strictly governed by MIL-STD-2073-1E and MIL-STD-129, including use of specific container codes, preservation methods, and mandatory 2D Data Matrix barcoding. The components must comply with DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, and physical identification of bare items is required under RQ017. The use of Class I ozone-depleting substances in any manufacturing or cleaning process is explicitly prohibited unless written approval is obtained from the Contracting Officer, and non-accepted supplies must have all government identification removed under RQ011. All offers must be submitted electronically via the DLA-BSM Internet Bid Board System by August 10, 2026, and offerors are required to maintain current representations in SAM, including UEI and CAGE codes, size status, and socioeconomic status such as HUBZone, WOSB, or SDVOSB, which may trigger price evaluation preferences. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity safeguards, hazardous materials, export controls, and cyber incident reporting, with deviations approved under deviation numbers such as 2026-00038. Inspection and acceptance occur at the origin by the Government under FAR 52.246-2, and payment must be processed electronically through Wide Area WorkFlow. The solicitation is open to full and open competition, with no set-aside specified, and no attachments are required beyond documentation explicitly referenced within the body of the solicitation.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M0-26-T-039H
This contract is for the procurement of one electrical connector backshell, identified by NSN 5935-01-194-9573 and part number M85049/10-14W. The item must adhere to SAE AS85049/10C and AS85049F standards and is a qualified item under the Qualified Products List (QPL) for connector assemblies and electrical contacts. Delivery is required within five days of order, with the final destination being Electric Boat M&M in Groton, Connecticut. The agreement mandates strict compliance with DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging based on the hazardous material status per FED-STD-313. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract is issued by the Department of Defense under solicitation number SPE7M0-26-T-039H.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-038J
This contract is for the procurement of one nonmetallic hose assembly, identified by NSN 4720-01-655-0875 and part number 0625C10-0359-265. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-038J, with delivery required within five days. The item is designated as a Type I shelf-life item with a non-extendable lifespan of 120 months, requiring specific markings on all packaging and items in accordance with MIL-STD-129. The agreement mandates strict adherence to DLA packaging requirements and prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center in Solomons, Maryland. Shipping must be completed via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333248
New
DIBBS
WINDING MACHINE, COIL
Solicitation # SPE7M0-26-Q-1169
This contract is a solicitation for the procurement of one coil winding machine, identified by NSN 4940-01-621-8668 and part number 41750D-XA16297 from Broomfield Laboratories Inc. The agreement is established as a firm fixed price contract with a delivery requirement of five days after order. The item is destined for the USS George Washington CVN 73, with both inspection and acceptance occurring at the destination. The procurement is subject to strict DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the use of class I ozone depleting chemicals in the manufacture or delivery of the item. This is a total small business set-aside managed by the Department of Defense Maritime Supply Chain ESOC Buys.
All Other Industrial Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RELIEF, PRESSU
Solicitation # SPE7M0-26-T-038Y
This contract is for the procurement of two pressure relief valves under solicitation number SPE7M0-26-T-038Y for the Department of Defense. The items are identified by NSN 4820-01-504-5800 and are associated with Northrop Grumman Systems Corporation and The Lee Co. Delivery is required within five days of order, with the final destination being the Pearl Harbor Naval Shipyard in Hawaii. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components like batteries or sensors as specified by NAVSEA. Inspection and acceptance will take place at the destination.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-038B
This contract, identified as SPE7M0-26-T-038B, is for the procurement of one adapter bushing with NSN 4730015394064 and part number 10009-5 from Panova Inc. The order is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys. Delivery is required within five days after the order, with a required delivery date of August 10, 2026. The shipment is designated as an NMCS priority and is to be delivered FOB Origin to the USALRCTR Bavaria in Vilseck, Germany. The supplier must adhere to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
NUT ASSEMBLY, TUBE COUP
Solicitation # SPE7M0-26-T-037R
This contract is for the procurement of 20 units of a Nut Assembly Tube Coupling, identified by NSN 4730-01-246-1366 and Parker-Hannifin Corp part number 61P-2. The order is managed under solicitation SPE7M0-26-T-037R for the Department of Defense, specifically for delivery to the Marine Aviation Logistics Squadron 26 in Jacksonville, North Carolina. The required delivery date is August 10, 2026, with a delivery timeframe of five days after order. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence. Shipping must be handled via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract specifies FOB Origin for delivery, with both inspection and acceptance occurring at the destination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-037T
This contract is for the procurement of one metal tube assembly, identified as Caterpillar Inc part number 5J5530 and NSN 4710012541292. The item is designated as a critical application item and must be delivered FOB Origin to Camp Shelby in Hattiesburg, Mississippi, within five days. The required delivery date is August 10, 2026. Compliance with DLA packaging requirements is mandatory, specifically adhering to ASTM D3951 and MIL-STD-129 for marking and labeling. The contract strictly prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the item. All technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, excluding parcel post.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M0-26-T-037J
This contract, identified as SPE7M0-26-T-037J, is a solicitation for the procurement of one alternating current motor with NSN 6105-01-293-2760. The requirement is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys and is designated as a total small business set-aside. Delivery is required within five days after the order, with the final destination being the Carrier Outfitting Material Support Center in Suffolk, Virginia. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specified functional cases. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M0-26-T-039K
This contract is a solicitation for the procurement of one special power transformer, identified by NSN 6120-01-718-9497. The requirement is issued by the Department of Defense Maritime Supply Chain ESOC Buys and specifies a delivery timeframe of five days after the order. The item is to be delivered FOB Origin to the USS Louis H. Wilson Jr at Bath Iron Works in West Bath, Maine, with an original required delivery date of March 31, 2026. The agreement incorporates strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components like batteries or sensors as specified by NAVSEA. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and shipments must be sent via the fastest traceable means rather than parcel post.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, HOSE
Solicitation # SPE7M0-26-T-037X
This contract is for the procurement of a hose coupling, identified by NSN 4730-99-311-5068 and associated with KNDS Defence UK Limited part numbers 76/9067 and G406/8015/89. The order consists of one unit to be delivered FOB Origin with inspection and acceptance occurring at the destination. The required delivery date is August 11, 2026, with a delivery window of five days. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and ensure all shipments are sent via the fastest traceable means to the designated depot in Texarkana, Texas. Technical and quality requirements are governed by the DLA Master List, and there is a strict prohibition against the use of Class I ozone depleting chemicals in the production or delivery of the items.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
HOSE ASSEMBLY, HYDRA
Solicitation # SPE7M0-26-T-038W
This contract is for the procurement of one hydraulic hose assembly, identified by NSN 4820-01-254-5864 and part number 1682405-4. The item is designated as a critical application item and must be supplied in accordance with detailed drawings from Raytheon Company or New Tech Industries. Delivery is required within five days of order, with the final destination being the Portsmouth Naval Shipyard. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific NAVSEA standards. Inspection and acceptance will take place at the destination, and the shipment must be sent via the fastest traceable means rather than parcel post.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details