Gym Equipment

THIS IS A SOURCES SOUGHT REQUIREMENT. Please do not submit quotes as this information will be utitlized for Market Research only. Fire Department Gym Equipment solicitation The F.E. Warren Fire Department, 90 CES/CEF, is seeking to purchase new gym equipment. Measurements have been taken and new equipment must follow strict dimensional guidelines to safely integrate with room dimensions. Additionally, new equipment must meet specific color requirements (red frame W/ black upholstery). All frames shall be constructed of mechanical quality steel with a minimum 11-gauge wall thickness and be powder coated. Any foot platforms shall be coated with Linex or like material. All upholstery edges shall be stitched. All cushions must be three or four pound ECA foam, and shall be injection molded directly to the support board. All benches and racks must meet respective body weight and free weight certifications/qualifications according to industry standards for manufacturing, quality, and safety. All benches and racks must come with no less than a 10 year structural warranty. Upholstery and grips shall have no less than a 90 day warranty. Hardware and mechanical components shall come with no less than a 1 year warranty. Equal or like items MUST meet ALL specifications. Pricing should include shipping and installation. We are seeking to purchase the following items: Linear Leg Press (1 each) Must be between 94- 96 in length and 64- 66 in width, and 56- 58 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must have polyethylene coated foot platform Must be plate loaded Must have flip-in, flip-out racking mechanism Must have adjustable seat Must have a minimum of 4 weight horns for storage Weight horns shall be capable of holding four 45 lb plates per horn Max user weight shall be no less than 300 lbs Back Extension Must be between 58- 60 in length, 27- 29 in width, and 42- 44 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must have adjustable angled pad Athletic Half Combo Power Rack (1 each) Footprint shall be between 98- 102 in length, 64- 66 in width, and 93- 98 in height Frame must be made of no less than 11 gauge steel Frame color must be red Upright color must be black Frame must be powder coated Cross bars (Xmember) must be black Must have a total of two strength stations Must have eight, 7 weight horns (four on each side) Upright adjustment increments shall be 2 on center Max user weight shall be 350 lbs Max training weight shall be 495 lbs Athletic Power Rack Attachments Must come with straight bar (black) Must come with square bar (black) Dip Handle (black) 75 Degree Utility Bench (1 each) Must be between 50- 52 in length, 24- 27 in width, and 37- 39 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must not be adjustable Weight capacity shall be no less than 300 lbs Upper back pad shall be angled at 16 degrees Seat pad shall be angled at 4 degrees Must have foot rests Flat Bench (1 each) Must be between 48- 51 in length, 21- 23 in width, and 15- 17 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must not be adjustable Multi-Adjustable Bench (2 each) Footprint shall be between 53- 56 in length, 25- 28 in width, and 17- 19 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Equipment shall have 8 back pad adjustments in 10 degree increments from 0 degrees to 80 degrees Max rated capacity shall be no less than 765 lbs Seat shall adjust in increments Cable Motion Multi-Jungle (1 each) Must be between 190- 200 in length, 140- 146 in width Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must come with row, lat pull, core, adjustable pulley, and adjustable cable crossover stations Stack stations shall be no less than 190 lbs Equipment must have attached 3 in 1 assembly Assembly must include an additional 190 lb weight stack Additional weight stack must service a separate built in row, lat pull, and separate built in cable attachment Must come with associated bars, handles, and ropes for each station Preacher Curl (1 each) Must be between 35- 41 in length,33- 37 in width Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Seat must adjust by increments Deluxe Weight Tree (1 each) Must be between 20- 24 in length, 28- 30 in width, and 37- 40 in height Frame must be made of no less than 11 gauge steel Must be red frame Frame must be powder coated Must have eight, 8 weight horns Must be able to accommodate no less than 720 lbs 100 Lb Plate (4 each) Must be multi-sided for anti-roll safety Must be made of steel Must be overmolded with U.S. made urethane 45 Lb Plate (6 each) Must be 12 sided, anti-roll shape for safety Must have two diametrically opposed handle openings Handle opening shall be ergonomically designed Must be made of steel Must be overmolded with U.S. made urethane ISO-Lateral Rowing (1 each) Must be between 48- 50'in length, 56- 59 in width, and 55- 59 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Must have multiple grips for exercise variety Must be plate loaded Shall have been blueprinted from human movement Must have separate weight horns for single arm movement with independent diverging/converging motions Starting resistance shall be 12 lbs per workarm Smith Machine (1 each) Must be between 48-50 in length,85-91 in width, and 93-98 in height Frame must be made of no less than 11 gauge steel Frame must be powder coated Must be red frame with black components Must have 4 weight horns per side to accommodate plate storage Weight horns must have a capacity of four, 45 lb plates per horn Starting resistance shall be no less than 30 lbs Max weight capacity shall be no less than seven 45 lb plates per rod Path of motion shall follow the weigh motion of Olympic weight lifting Must have no less than 13 bar adjustments Leg Ext/Leg Curl (1 each) Must be between 63- 66 in length, 40- 43 in width, and 55 - 60 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Weight stack shall be no less than 200 lbs Select Pectoral Fly/Rear Deltoid Machine (1 each) Must be between 48 - 52 in length, 56 - 60 in width, and 68 - 72 in height Frame must be made of no less than 11 gauge steel Must be red frame w/black upholstery Frame must be powder coated Cables must be 7x19 strand construction, lubricated, nylon-coated Cushioning pads must be stitched at edges with no folds Must have solid steel weight plates Top weight plate shall be fitted with self-lubricating bushings Must have 7/16 diameter weight selector pin, pin shall magnetically lock in place Must have roller mechanism on seat adjustment Foot platform shall be polyethylene spray-coated Weight stack must be no less than 295 lbs Max user weight will be no less than 300 lbs Dumbbell 5-50Lbs (2 each) Must be overmolded with urethane Must be multi-sided for anit-roll safety Handle shall be flared, hard chrome plated Handle to head must be pressed and welded Handle size shall be 1-1/4 diameter up to 27.5 lbs and 1-3/8 diameter for 30lbs and above Dumbbell set 55-100Lbs (2 each) Must be overmolded with urethane Must be multi-sided for anit-roll safety Handle shall be flared, hard chrome plated Handle to head must be pressed and welded Handle size shall be 1-3/8 diameter Dumbbell set 105-125Lbs (1 each) Must be overmolded with urethane Must be multi-sided for anit-roll safety Handle shall be flared, hard chrome plated Handle to head must be pressed and welded Handle size shall be 1-3/8 diameter Dumbbell Rack (3 each) Must be between 86- 92 in length, 23- 25 wide, and 30- 33 tall Frame must be made of no less than 11 gauge steel Frame bust be powder coated Must be red frame Must be three tier --------------------------------------------------------------------------------------------------------------------- End of request