Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Hamilton Water Jet Repairs

Active
N0016726Q1131Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center, Carderock Division, is seeking qualified small businesses to provide diagnostics and repair services for two Hamilton Jet waterjet propulsion units, specifically models HJ322 and HJ292, under a total small business set-aside contract. The work requires detailed technical expertise to assess, diagnose, and restore the performance of these critical propulsion systems in accordance with the Performance Work Statement, which outlines the full scope of required tasks and standards. The solicitation, numbered N0016726Q1131, was posted on July 17, 2026, with a firm response deadline of July 23, 2026, at 3:30 PM Eastern Time. The contract falls under NAICS code 333618, which pertains to other engine equipment manufacturing, and is managed by the Department of Defense through the Carderock office located in Bethesda, Maryland. Interested vendors must respond through the SAM.gov portal, and all technical and administrative inquiries should be directed to Christopher C. Rolince, the primary point of contact, via email or phone. There is no specified place of performance listed, implying that the work may be performed at the contractor’s facility or at a designated Navy location, with final arrangements to be determined as part of contract award and execution.

General Info

U.S. Navy seeks small businesses to diagnose and repair HJ322 and HJ292 waterjet propulsion units under set-aside contract.

Agency

Department Of Defense → Nswc CarderockView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

MD

Set-Aside

SBA

Documents

(6)

A04.+A001+DI-MISC-80508B_Tech+Report.pdf

PDF

A04.+DI-MISC-80508B_Technical+Report+A001.pdf

PDF

N0016726Q1131+-+Water+Jet+Draft+Solicitation.pdf

PDF

B03+Request+to+Restrict+Competition+NTE+SAT+Final.pdf

PDF

A04.+DI-SESS-81359B_Parts_List+A002.pdf

PDF

A04.+A002+DI-SESS-81359B_Parts_List.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
Contacts1 person available
OfficeBETHESDA, MD, 20817-5700, USA
Organization / Agency
Department Of Defense → Nswc Carderock
View Agency Profile
Office AddressBETHESDA, MD, 20817-5700, USA
Contacts

Full Description

Show more

NSWCCD has a requirement for the diagnostics and repair of two (2) Hamilton Jet waterjet propulsion units (specifically HJ322/HJ292). See PErfomance Work Statement (PWS) for detailed description. 

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
Federal
STARTER,ENGINE,AIRThis contract solicitation, identified as N0010426QXB78, seeks a firm-fixed-price repair service for the STARTER, ENGINE, AIR, issued under Emergency Acquisition Flexibilities by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement mandates strict adherence to MIL-STD packaging and Government Source Inspection, with all freight terms FOB Origin. The contractor must be an authorized distributor of the original equipment manufacturer and must provide written authorization from the OEM if not the manufacturer. Compliance with Item Unique Identification (IUID) requirements under DFARS 252.211-7003 and marking per MIL-STD-130 Rev N is mandatory, along with full traceability and documentation of all repair costs, including profit rates, delivery lead time, and a 90-day minimum quote expiration. The contract includes an optional increase of up to 100% of the original quantity, exercisable unilaterally by the government within 365 days of award under FAR 52.217-6, and requires acceptance of this option in the quote. The evaluation will prioritize price as the primary factor, followed by past performance and supplier performance risk under DFARS 252.204-7024. All quotations must be submitted electronically to russell.w.kreider.civ@us.navy.mil by the deadline of August 17, 2026. The contractor is responsible for full inspection and quality assurance throughout the repair process, maintaining records for one year after final delivery, and must not substitute any parts without prior written approval from the Contracting Officer, with any changes classified under specific code designations. The item must be repaired to meet the original design specifications and include coverage for all potential issues such as incomplete, damaged, or missing components. Only repairs are acceptable — test and evaluation quotes will be rejected. All documentation and proprietary information provided by the Navy must be safeguarded according to their designated distribution statements, and the awardee must ensure compliance with all security prohibitions, small business subcontracting obligations, and mandatory use of Workflow Pro and Wide Area Workflow payment instructions.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333618
New
Federal
Sole source for John Deere Marine Genset Parts procurementThis is a sole source solicitation for the procurement of John Deere Marine Genset Parts, issued under solicitation number N6264926QB066 by the Naval Supply Systems Command Fleet Logistics Center Yokosuka, aDepartment of Defense agency. The requirement is not open to competitive bidding due to the specialized nature of the parts and their exclusive compatibility with John Deere marine generator sets in use by the U.S. Navy. The solicitation was posted on July 17, 2026, with a response deadline of July 23, 2026, and is classified under NAICS code 333618 for Engine, Turbine, and Power Transmission Equipment Manufacturing. Performance of the contract will occur in Yokosuka, Kanagawa, Japan, where the equipment is operationally deployed. The point of contact for this solicitation is Yoko Yamaguchi, reachable via email at yoko.yamaguchi.ln@us.navy.mil, who is to be consulted for any procurement-related inquiries. The delivery location is FPO, AP, 96349-1500, indicating a military postal address used for overseas logistics. This action is strictly for informational and posting purposes, meaning that the contract award is anticipated to be granted directly to the sole qualified supplier without competition. The solicitation does not indicate any set-aside provisions, and the procurement is managed under the Office of the Department of Defense with full accountability for timely delivery to support naval vessel readiness in the Pacific theater.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333618
New
DIBBS
Precision Manufacturing of Reciprocating Pump per Military DrawingsThe contract mandates the precise manufacture of a reciprocating pump in full alignment with military drawings, a comprehensive technical data package, and stringent quality standards including MIL-STD and ASME Y14.5 specifications. All production activities must adhere to these exacting requirements to ensure dimensional accuracy, material integrity, and functional reliability as defined by defense industry protocols. The work is classified as a subcontract under NAICS code 333618 and is being procured by the Department of Defense through the Maritime Supply Chain organization, with performance required at the designated location in Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, providing a limited window for qualified vendors to submit proposals. There is no set-aside designation specified, indicating the opportunity is open to all eligible subcontractors regardless of business size or classification. Although no point of contact is listed, the official solicitation can be accessed via the provided DIBBS link, and all technical deliverables must be traceable to the referenced military documentation to meet compliance and inspection criteria. Failure to conform to any element of the TDP or quality standards will result in rejection of the deliverable.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333618
New
DIBBS
Cooling System Pump Supply and DeliveryThe contract entails the procurement and delivery of six units of Cooling System Pumps identified by NSN 2930016124601, with all items required to meet stringent military packaging and marking standards to ensure compatibility with defense logistics systems. The supply is part of a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support initiative, aimed at maintaining operational readiness through reliable component procurement. The solicitation was posted on July 16, 2026, and responses must be submitted by July 27, 2026, with the North American Industry Classification System code 333618 indicating the scope aligns with other military equipment manufacturing activities. All delivered pumps must be fully compliant with applicable military specifications, including proper identification, protective packaging, and labeling as dictated by defense supply protocols. The place of performance and point of contact details are not specified, suggesting the location of delivery and coordination may be determined post-award or handled centrally through Defense Logistics Agency systems. The contract is accessible via the DIBBS platform for qualified subcontractors, and bidders must ensure their offerings meet all technical, logistical, and regulatory requirements outlined in military procurement guidelines to qualify for award.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 339991
New
Federal
Technical Data Package (TPD) for Main Shaft SealsThe Naval Surface Warfare Center, Carderock Division is seeking a small business contractor to develop a white paper for a Technical Data Package (TDP) focused on the main shaft seal design for U.S. Navy submarines, leveraging over 70 years of institutional experience in seal design, testing, and manufacturing. The contractor must act as a subject matter expert in science, engineering, and fluid dynamics to conduct a comprehensive technical evaluation of the existing seal design through engineering calculations and numerical simulations, culminating in a formal white paper. The work is defined under a Total Small Business Set-Aside (FAR 19.5) with NAICS code 339991, and proposals must be submitted by July 29, 2026, at 11:00 AM, following a deadline extension from the original solicitation date. The contract is structured as a Firm Fixed Price with a 12-month period of performance beginning at award, and delivery is required at the Washington Navy Yard, DC. The effort includes mandatory delivery of three Contract Data Requirements Lists (CDRLs): a status report, a funds and labor hour expenditure report, and a technical report, each tied to specific data item identifiers. The solicitation operates under a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where technical acceptability is a pass/fail gate—failure to meet this threshold disqualifies the proposal regardless of price. The contractor must comply with stringent security and cybersecurity requirements, including handling Controlled Unclassified Information (CUI) as defined by DoD Instruction 5200.48 and NIST SP 800-171, with designated key personnel required to hold a SECRET security clearance prior to accessing sensitive data. The contract incorporates CMMC compliance, mandating a current CMMC assessment level to be determined at award, with annual affirmations submitted through the Supplier Performance Risk System. All data and physical items must be marked and labeled per MIL-STD-130 and MIL-STD-129, with machine-readable unique item identifiers verified using approved automatic identification technology. Electronic invoicing must be processed via Wide Area WorkFlow (WAWF), and the contractor must affirm compliance with federal regulations on gratuities, anti-trafficking, ethical conduct, and prohibition of internal confidentiality agreements. The Government will provide the primary technical data package (Reference #1, dated March 24, 2026) as Government Furnished Information. Sub
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 513210
New
Federal
Augmentation on the Corrosion Cracking Maintenance Prediction Software (CCMPS).The Naval Surface Warfare Center, Carderock Division is seeking continuous augmentation support for the Corrosion Cracking Maintenance Prediction Software, a specialized tool used to forecast and mitigate corrosion-related failures in naval systems. The work requires ongoing technical expertise to enhance, maintain, and adapt the software to evolving operational needs, with detailed requirements outlined in the Performance Work Statement. This effort is critical to ensuring the longevity and structural integrity of naval assets through predictive maintenance capabilities informed by real-time corrosion data analysis. The solicitation, numbered N0016726Q1129, was posted on July 15, 2026, with responses due by July 21, 2026, and is structured as a combined action under a Total Small Business Set-Aside, limiting eligibility to small businesses as defined by the SBA. The North American Industry Classification System code is 513210, indicating software publishing and related activities. The contracting office is located in Bethesda, Maryland, and the point of contact for inquiries is Christopher C. Rolince, reachable via phone or email. Performance is expected to support federal operations without a specified physical location, allowing for remote or hybrid execution consistent with software development and maintenance practices.
Software Publishers

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
Federal
Presolicitation Notice for Peel 3D Scanners and AccessoriesThe Naval Surface Warfare Center Carderock Division is seeking quotes for Peel 3D Scanners and accessories under a firm fixed price purchase order using Simplified Acquisition Procedures, with this notice serving as the sole solicitation. The requirement is a 100% Total Small Business Set-Aside, limited to businesses with 600 employees or fewer, and is governed by FAR 12.201-1(c)(2) and other applicable regulations. All items must be the exact brand-name products specified, with no substitutions allowed, and must be shipped FOB Destination to Crane, Indiana, with shipping charges included in the quoted price. Quoters must provide proof of authorized reseller or distributor status for Peel 3D/Creaform products, and all items must be Trade Agreements Act compliant with country of origin clearly documented; failure to meet either requirement will render a quote unacceptable. The NAICS code is 334519 and the PSC is 6650. Quotes must be submitted by 12:00 PM EST on July 21, 2026, to Michael S. Brodie and must include the official company name, point of contact details, CAGE code, and proof of authorization. Evaluation will be based on technical compliance—with all quotations failing if they do not exactly match the mandated brand and part numbers—past performance as verified through SPRS, SAM, and FAPIIS, and price reasonableness among technically acceptable offers. Questions must be submitted by July 16, 2026, at 12:00 PM EST, and will be addressed via amendment. Applicable clauses from FAR, DFARS, and NMCARS are incorporated, including 52.219-6 for the small business set-aside and 52.222-90. This acquisition does not require CMMC certification.
Other Measuring and Controlling Device Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
RFP - VCS Devices Piece PartsThe Naval Surface Warfare Center Carderock Division is soliciting proposals under solicitation number N0016726R1004 for machining services to fabricate nickel aluminum bronze canisters intended for use in the Virginia-Class propulsor manufacturing program. The solicitation is a total small business set-aside under FAR 19.5, with NAICS code 336611 indicating the industry classification for ship and boat building and repairing. All proposals must be submitted electronically through the PIEE Solicitation Module by the closing date of August 7, 2026, at 9:00 PM Eastern Time. The contracting office is located in Bethesda, Maryland, with primary point of contact Jordan Good and secondary contact Abeer Ameer available for inquiries. The place of performance and detailed delivery schedule have not been specified in the available information, nor have technical specifications, inspection criteria, or packaging requirements been provided. There is no disclosed estimated contract value, and while the solicitation form and evaluation factors are referenced in metadata, their content could not be retrieved. No special requirements such as bonding, insurance, or key personnel provisions were identified, and no representations, certifications, or attachments are listed. Offerors must ensure compliance with small business set-aside eligibility and submit responses via the designated portal prior to the deadline.
Ship Building and Repairing

POSTED

5 days ago

DEADLINE

in 21 days
View Details
NAICS: 541618
Federal
NSWCCD Other Transaction Authority (OTA) Agreement Consortium Management Firm Request for Information (RFI)The Naval Surface Warfare Center Carderock Division is seeking to establish an Other Transaction Authority agreement with a single consortium management firm to support the development and maturation of advanced technologies aimed at maintaining maritime superiority through prototype and production projects. The firm selected will be responsible for managing a consortium of industry participants to facilitate collaboration, innovation, and technology transition, with the goal of fostering feedback and input from the private sector on proposed project approaches. This initiative operates under 10 USC § 4022 and is designed to accelerate the adoption of cutting-edge capabilities by leveraging non-traditional defense contracting methods. Interested firms must submit a capabilities statement detailing their organizational structure, potential consortium members, and their ability to address the specified technology areas, in response to questions outlined in the attached Request for Information. All responses must be submitted via email to Shelby O’Neill and Carolyn McCloskey no later than 12:00 PM ET on August 6, 2026, with preliminary questions due by July 23, 2026. The solicitation number is N00167269001, and the North American Industry Classification System code associated with this effort is 541618. The activity is managed by the Department of Defense through the NSWC Carderock office located in Bethesda, Maryland, and is classified as a sources-sought notice to gather industry input prior to issuing a formal RFP. There is no set-aside designation, and the selected consortium manager will be expected to coordinate diverse industry capabilities to meet Navy mission objectives.
Other Management Consulting Services

POSTED

9 days ago

DEADLINE

in 19 days
View Details