HANDLE ASSEMBLY, STEEL

HANDLE ASSEMBLY,STEEL
HANDLE ASSEMBLY, (ROD SECTION. CLEANING).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
,,
______________EXCEPTION DATA__________________
IF DRAWING NOTE GIVES OPTION FOR ZINC OR
MANGANESE COATING THEN MANGANESE IS REQUIRED.
PD 8436776:
BLOCK 12:
CHANGE METHOD OF PRESERVATION:
FROM: MIL-STD-2073-1, METHOD 10
TO: MIL-STD-2073-1, METHOD 33
BLOCK 20, CHANGE STEP 2:
FROM: BAG, SEE DWG 13027484 FOR DETAILS
TO: BAG, MIL-DTL-22020, TYPE I
____________END OF EXCEPTIONS_______________
________SPECIAL PACKAGING INSTRUCTIONS______
PACKAGING:
REMOVE DR 13027484
____END OF SPECIAL PACKAGING INSTRUCTIONS___
CERTIFICATE OF CONFORMANCE IS REQUIRED.
THE ITEM BEING PROCURED IS A CRITICAL GUN PART
ITEM WITH UNIQUE REQUIREMENTS.
PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS
REQUIRED BY MILITARY SPECIFICATION (S)
APPLICABLE TO THIS CONTRACT WILL BE APPROVED
BY THE CONTRACT POST AWARD CONTRACTING OFFICER
SPE7LX-26-U-005F
SECTION B
(PCO).
PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA
QAR AT THE ACTUAL MANUFACTURER'S FACILITY.
THE IDENTIFICATION OF THE ACTUAL
MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE
SUBMITTED TO THE CONTRACTING OFFICER FOR
INCLUSION IN THE AWARD. UPON AWARD<(>,<)> ANY CHANGES
TO THE ABOVE MUST BE APPROVED BY THE PCO VIA
FORMAL CONTRACT MODIFICATION.
PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE
WITH PROCUREMENT NOTE E05<(>,<)> MAY BE INVOKED FOR THE
REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE
INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE
CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED
DURING TESTING.
PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>
WILL BE PERFORMED PRIOR TO ACCEPTANCE OF
EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE
PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED
IN THE PRODUCTION OF PARTS ON THIS CONTRACT.
FIVE (5) PVT SAMPLES, UNLESS OTHERWISE
SPECIFIED<(>,<)> WILL BE REQUIRED TO BE IDENTIFIED
TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT
IN FOR TESTING.
CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.
**********************************************************
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
SPE7LX-26-U-005F
SECTION B
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ036Phosphate Coating Supplier Certification Requirements
RT001: MEASURING AND TEST EQUIPMENT
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TDP Rev B Gen 4 IAW BASIC DRAWING NR 19204 8436776 REVISION NR G DTD 10/02/2017 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19204 8448217 REVISION NR G DTD 11/16/2022 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19204 8448218 REVISION NR G DTD 11/16/2022 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR E DTD 02/18/2026 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19204 8436776 REVISION NR DTD 05/19/2026 PART PIECE NUMBER:
SPE7LX-26-U-005F
SECTION B
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19204 8436776 REVISION NR C DTD 05/22/2019 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19200 13027484 REVISION NR C DTD 03/31/2020 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19200 12993884 REVISION NR K DTD 04/23/2020 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19200 8436776 REVISION NR H DTD 11/16/2022 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19204 8436776 REVISION NR F DTD 09/01/2017 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE SPEC NR MIL-DTL-16232H(1) NOT 1 REVISION NR H DTD 01/26/2026 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE UNK DI-NDTI-80809B NOT 3 REVISION NR B DTD 09/24/2024 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE UNK QPL-3150-34 NOT 1 REVISION NR 34 DTD 03/15/2007 PART PIECE NUMBER:
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000243080 0001 EA 18,616.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:1005011130321
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
SPE7LX-26-U-005F
SECTION B
PR: 1000243080 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKG IAW SPI AMP8436776, REV C, DATED 22/MAY/2019

SPE7LX-26-U-005F NSN/Part Number: 1005-01-113-0321 Quantity: 18,616 EA Purchase Request: 1000243080QTY: 18616 Delivery: 139 days ADO