Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HANDLE, CRANK

Active
SPE7L1-26-Q-1325Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 143 units of a HANDLE, CRANK identified by NSN 5340-01-559-9356 under solicitation SPE7L1-26-Q-1325, with a firm delivery deadline 272 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. The item is defined by Army drawings, but any paint or coating specifications must comply with DCSC Drawing 16236 CS-2300-0001, which details Chemical Agent Resistant Coatings and high-temperature finish requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, utilizing zero-defect acceptance unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951—subject to precedence by DLA requirements. Palletization and unit of issue must align with contract specifications, and packaging must be marked per federal guidelines. Delivery is FOB origin to the designated DLA San Joaquin receive warehouse in Tracy, CA, with inspection and acceptance occurring at destination. All drawings and specifications referenced are accessible via DIBBS during the solicitation period, and compliance with the referenced TDP revisions, QAPs, and reference drawings including 19207 12443760 and 16236 SQAPCARCLTPHOS81361 is mandatory. The contract enforces a zero variance in quantity, and the point of contact is Mary Miller at DLA.

General Info

Procure 143 crank handles per DLA specs, zero defect acceptance, FOB origin to Tracy CA, strict packaging and coating compliance.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7L1-26-Q-1325 for Handle Crank

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Mary Miller
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HANDLE<(>,<)> CRANK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
DCSC DWG IS AVAILABE AT DISC.
TDP Rev D Gen 4 IAW BASIC DRAWING NR 19207 12443760 REVISION NR C DTD 04/11/2007 PART PIECE NUMBER: 12443760
TDP Rev D Gen 4 IAW REFERENCE DRAWING NR 19207 12420325 REVISION NR L DTD 11/15/2024 PART PIECE NUMBER:
TDP Rev D Gen 4 IAW REFERENCE DRAWING NR 19207 12443760 REVISION NR DTD 10/10/2025 PART PIECE NUMBER:
TDP Rev D Gen 4 IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
SPE7L1-26-Q-1325
SECTION B
SUPPLY/SERVICE: 5340-01-559-9356 CONT'D
TDP Rev D Gen 4 IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5340-01-559-9356 143.000 EA $ _______________ $ _______________
HANDLE,CRANK
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 272 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE7L1-26-Q-1325
SECTION B
SUPPLY/SERVICE: 5340-01-559-9356 CONT'D
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017236968 0001 N/A N/A N/A 04/01/2027

SPE7L1-26-Q-1325 NSN/Part Number: 5340-01-559-9356 Quantity: 143 EA Purchase Request: 7017236968QTY: 143 Delivery: 272 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
SCALE, WEIGHINGThe contract specifies the procurement of commercial off-the-shelf weighing scales identified by NSN 6670016245433 and part number 1776113, supplied by Apple Valley Scale Company and Dymo Corporation, with a total quantity of 372 units. Delivery is required FOB origin within 168 days of contract award, with an original required delivery date of September 5, 2026, and a needed ship date of January 13, 2027. The unit price is $372.00 per unit, totaling $138,384.00, with no variance permitted in quantity. Inspection and acceptance occur at the destination facility located at DLA Distribution Red River in Texarkana, Texas, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all labeling and marking must conform to specified government standards. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances in the sample lot unless the contract states otherwise. The contract is a total small business set-aside under NAICS code 332216, issued as a solicitation with a response deadline of July 28, 2026. All technical and quality requirements referenced by R and I numbers are governed by the DLA Master List in effect on the solicitation issue date, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The point of contact for the contract is Hien-Van Trinh, and the purchase request number is 7017536479.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
Federal
66--SCALE,WEIGHINGThe U.S. Department of Defense, through DLA Aviation, is seeking to procure 372 units of NSN 6670016245433, SCALE, WEIGHING, with delivery required to DLA Distribution Red River within 168 days of award. This procurement is issued as a Request for Quotation under solicitation number SPE4A526T295Y, available exclusively online via the SAM.gov portal, with no hard copies provided. Only approved sources, identified by the CAGE codes 0M5P6 and 0TH24, are eligible to respond, though all responsible contractors may submit quotes if received by the deadline. The solicitation is a Total Small Business Set-Aside under NAICS code 332216, limiting participation to small businesses certified by the SBA. Quotes must be submitted electronically, and no technical specifications, plans, or drawings are available. The primary point of contact for inquiries is listed via email, with further details accessible through the provided SAM.gov link or the DIBBS website using the solicitation number. The response deadline is July 28, 2026, and the contracting office is located in Richmond, Virginia.
DLA Aviation

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
Federal
Socket Wrench Crowfoot, Gimbal Bearing Compressor Sets Solicitation The solicitation seeks suppliers to provide socket wrench crowfoot attachments with part number 18C12916-1 and compressor sets for gimbal bearings with part number 901-210-025-101, under a total small business set-aside as defined by FAR 19.5. This opportunity is open exclusively to small businesses and falls under the NAICS code 332216, which pertains to forging and stamping. The solicitation, identified by number N6833526Q1164, was posted on July 20, 2026, and bids must be submitted by August 3, 2026, at 10:00 PM Eastern Time. The contracting activity is led by the Naval Air Warfare Center Aircraft Division, a component of the Department of Defense, with performance tied to Joint Base MDL, New Jersey. All correspondence and inquiries should be directed to Suresh Jafar, the primary point of contact, via email at suresh.jafar.civ@us.navy.mil or phone at 240-587-2457. The solicitation is available for review through the SAM.gov platform at the provided UI link, and no physical place of performance is specified beyond the office location.
Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332216
New
Federal
Solicitation - Standard Automotive Tool Set (SATS) Base in Mobile; NSN: 4910-01-531-2053 - UPDATEDThis solicitation, issued as a sealed bid under W912CH-26-B-0003, seeks a single Firm-Fixed Price contract for the Standard Automotive Tool Set (SATS) Base in Mobile, identified by NSN 4910-01-531-2053 and part number KTCS1753. The procurement is exclusively set aside for small business concerns under Revolutionary FAR Overhaul 19.104-1 and is for the delivery of a standardized tool system comprising five roll-around storage units labeled G, H, J, K, and L, along with additional commercially packaged hand tools, all meeting rugged military specifications. The Technical Data Package (TDP) with Distribution Statement A is available on SAM.gov and is essential for compliance, as the product must meet or exceed the quality and workmanship of domestic commercial equivalents. All bids must be submitted electronically in Microsoft Office or PDF format under strict formatting rules, including file size limits, naming conventions, and prohibition of hyperlinks or external references. The Government will evaluate bids without discussions, and failure to complete all required representations, fill-ins, or meet material requirements will result in immediate rejection. Bids must include pricing for both the production quantity and an unexercised option quantity of 95 units, evaluated on the lowest total price, with transportation costs assessed at FOB origin. The contract requires full compliance with military packaging standards, including MIL-STD-2073 and MIL-STD-129 for marking and labeling, with mandatory application of U.S. Military Property identification per MIL-STD-130 and adherence to Unique Item Identifier (UII) requirements. Inspection and acceptance must occur at origin, and the contractor is solely responsible for arranging pre-shipment government inspection through the Defense Contract Management Agency prior to shipping to the designated delivery location in New Cumberland, PA. Payment will be processed via Wide Area WorkFlow (WAWF) under specific DoDAAC routing instructions, and all submissions must be in English and U.S. dollars. The contract incorporates numerous FAR and DFARS clauses by reference, including those governing subcontractor payments, anti-kickback procedures, trafficking in persons, employment eligibility verification, and compliance with Buy American and Berry Amendment laws. Bidders must ensure their SAM registration is current and contains all applicable certifications within the last 12 months. Key amendments and updates, including Amendment 0001 and 0002, and the Domestic
W6QK Acc- Dta

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
DIBBS
Hand Hammer Supply & ManufacturingThe contract seeks the manufacture or supply of a single hand hammer identified by NSN 5120-15-151-5812 and part number 99366792, requiring full compliance with Department of Defense technical specifications, military packaging standards, and labeling requirements. The item must be delivered to Camp Pendleton, with the designated zip code 92055-5574 serving as the sole place of performance. The solicitation falls under NAICS code 332216, categorizing it as a subcontract for the production of hand and edge tools. The opportunity was posted on July 19, 2026, with responses due by July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All deliveries must adhere strictly to government-mandated protocols to ensure suitability for military use and logistical compatibility.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
Electrical Wire Manufacturing and Supply (MIL-DTL-12000 Compliant)The contract calls for the manufacture and delivery of 100 units of electrical wire designated by NSN 6145-01-384-4313, fully compliant with the military specification MIL-DTL-12000. All products must be packaged and marked according to established military standards to ensure proper handling, identification, and compliance with defense logistics requirements. The work is classified as a subcontract under NAICS code 332216, and the sourcing is managed by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, indicating a brief but critical window for bidders to submit proposals. The place of performance and point of contact information are not specified, but the contractual obligations are bound to federal defense supply standards, and the work must be conducted in alignment with DLA procurement protocols as referenced by the DIBBS platform link provided.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
CABLE, POWER, ELECTRIThe contract involves the procurement of 30 feet of power cable, sold in continuous foot lengths, with the item identified by NSN 6145-01-666-9522 and a purchase request number 7017524585. Delivery is required within 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Configuration changes must be managed through an Engineering Change Proposal, and any request for deviation or waiver requires formal processing. Government identification must be removed from non-accepted supplies as specified. The solicitation number is SPE7M1-26-T-218W, posted on July 19, 2026, with responses due by July 30, 2026. The NAICS code is 332216, and the performing location is Selfridge ANGB, MI, 48045-5213. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Alisha Blanton as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
WIRE, ELECTRICALThe contract pertains to the procurement of electrical wire with NSN 6145011602260, under solicitation SPE7M1-26-T-218Z, requiring a total quantity of 10,000 feet delivered in three separate line items of 429 feet, 2,571 feet, and 7,000 feet. Delivery is to be made FOB origin within 46 days of contract award, with a permissible quantity variance of plus or minus 5 percent. Inspection and acceptance occur at the destination, and all materials must comply with MIL-STD-2073-1E for packaging and MIL-DTL-12000 for preservation, meeting strict marking requirements per MIL-STD-129 and DLA packaging standards. The wire must conform to SAE AS22759/11A and SAE AS22759E specifications, and the item is designated as a critical application with qualified products list applicability. Mercury and mercury-containing compounds are strictly prohibited except in specific functional components such as batteries, fluorescent lamps, and weapons systems, with additional containment requirements for portable devices. Packaging must prevent damage and ensure compliance with DLA’s uniform standards, including palletization and preservation protocols, while adhering to advice code directives on continuous length requirements. Delivery destinations include Hill AFB, New Cumberland, and Robins AFB, with specific ship dates varying per line item. The contract mandates full and open competition and incorporates all technical and quality requirements referenced through the DLA Master List, with deviations requiring formal engineering change proposals or variance requests. All units are issued in feet in accordance with DoD standards, and the point of contact is Alisha Blanton at DLA.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
WIRE, ELECTRICALThe contract pertains to the procurement of 100 units of electrical wire with NSN/Part Number 6145-01-384-4313, under solicitation SPE7M1-26-T-218J, with a delivery requirement of 20 days after award. The solicitation is issued by the Department of Defense through the Maritime Supply Chain organization and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 as a Certified Third-Party Assessment Organization is mandatory, and the item is subject to Covered Defense Information requirements, necessitating appropriate data protection measures. The technical data associated with this item is classified under export control regulations—either ITAR or EAR—prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs its handling. Contractors must have valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive DLA approval to access the controlled data. Additionally, any configuration changes must follow the Engineering Change Proposal and Request for Variance process, and packaging must meet DLA packaging requirements for procurement. The response deadline is July 30, 2026, with point of contact Alisha Blanton available for inquiries via phone or email.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
HAMMER, HANDThe contract pertains to the procurement of one hammer, hand, identified by the NSN 5120-15-151-5812 and part number 99366792, under solicitation SPE4A6-26-T-07TR, with a required delivery within 20 days FOB origin. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. All packaging and labeling must adhere strictly to MIL-STD-129 and the DLA Packaging Requirements, with palletization following RP001 specifications. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based method; unspecified attributes are treated as major with a verification level of IV or an AQL of 1.0. Acceptance is based on zero non-conformances in the sample lot unless otherwise stated in the contract. The unit of issue is each, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and shipping must be conducted via traceable freight methods, not parcel post. Delivery is to the 3rd AAV BN at Camp Pendleton, California, with an original required delivery date of May 11, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, SPANNERThe contract solicitation SPE4A0-26-T-3940 is for the procurement of one unit of a WRENCH, SPANNER with National Stock Number 5120016655735, to be delivered FOB Origin within five days of order placement to Fort Carson, Colorado. The item is procured under a simplified acquisition with no approved technical data package available, and the specification relies on proprietary or insufficient data, making competition limited. Packaging must comply with MIL-STD-2073-1E using clean/dry preservation methods, corrugated paper wrap, and E5 box containers, with palletization following DLA’s RP001 requirements. Marking must adhere strictly to MIL-STD-129, including standardized barcoding, NSN, CLIN, and contract number identification, with no special marking required. Inspection and acceptance occur at the destination, with quality verification governed by MIL-STD-1916 or ASQ H1331 using zero non-conformance acceptance thresholds; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Sampling may use MIL-STD-105/ASQ Z1.4 for lot sizing, but acceptance remains zero defects unless otherwise stated. Cybersecurity and information handling requirements are extensive, mandating NIST SP 800-171 controls, DFARS 252.204-7012 safeguards for covered defense information, and reporting of cyber incidents. The contractor must ensure compliance with prohibitions on using telecommunications equipment from Chinese military companies, handling hazardous materials, storing toxic substances, and employing hexavalent chromium. All payments must be processed via WAWF, and the contract includes clauses prohibiting mandatory arbitration, requiring whistleblower rights notification, restricting confidentiality agreements, and controlling the use of government work product. The contractor must maintain current UEI and CAGE codes, certify small business status if applicable, and comply with transportation rules including the use of U.S.-flagged vessels for ocean shipments. The unit price listed as $1.00 is inconsistent with historical pricing data, suggesting a potential placeholder or error, and no formal contract value or option quantities are specified, though the delivery date is set for July 15, 2026. All submissions must be made electronically through DIB
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
Federal
61--WIRE,ELECTRICALThe solicitation seeks quotations for 100 units of electrical wire with NSN 6145013844313, to be delivered to CLRS ASC AIR DEPOT 983 SQN PVE MH within 20 days after order award. The approved source for this item is specified as 81205 BMS13-48/3-2-20, and only electronic submissions are accepted; hard copies are not available. The procurement is conducted via an RFQ under solicitation number SPE7M126T218J, with all responsible suppliers encouraged to submit quotes that are received prior to the deadline of July 30, 2026. No technical specifications, plans, or drawings are provided, and bidders must rely on the designated approved source data and their own understanding of the requirements. The contract falls under NAICS code 332216 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. All inquiries must be directed to the designated point of contact via email, with further details accessible through the SAM.gov workspace link provided.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTROThe contract is for a single manual control lever with NSN 5340-01-147-3421, issued under solicitation SPE7L1-26-T-853Y by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to strict technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Technical data associated with the item is controlled under ITAR or EAR, restricting export or disclosure to foreign persons without authorization, and only contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal approval may access such data. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Delivery is required within five days of award to Anniston, Alabama, with a response deadline of July 31, 2026, and full and open competition is authorized. The primary point of contact is Michael Nordahl at DLA’s contracting office.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
UNIVERSAL JOINT, NONVEHThe contract is for the procurement of four universal joints, nonvehicular, identified by NSN 3010-01-400-6047, under solicitation SPE7L1-26-Q-1335, with a total small business set-aside and a 241-day delivery timeline. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited; any substitutions require prior approval unless explicitly authorized by the specification. The supply is subject to stringent configuration change management, requiring engineering change proposals and formal variance requests for any deviations. Inspection and acceptance may occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only DLA-approved contractors holding JCP certification, who have completed required DOD training and questionnaire, may access this data. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization, and covered defense information protocols are enforced. The contracting activity is the Department of Defense’s Land Supply Chain, with performance to be delivered to Tracy, CA, and primary point of contact is Meghan Ruehle.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
BUCKLEThe contract specifies the procurement of 92 units of a BUCKLE, GT SIDE RELEASE 1 INCH LATCH with NSN 5340015277331 under solicitation SPE7L1-26-T-854L. Delivery is required within 105 days FOB origin to the designated receiving warehouse in Tracy, California, with no tolerance for quantity variance. All items must comply with rigorous technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging specifications per MIL-STD-2073-1E, MIL-STD-129, MIL-STD-147, and ASTM D3951, with strict prohibition of bulk packaging. Packaging must be labeled in accordance with military marking standards and include no special marking codes. Mercury and mercury-containing compounds are expressly prohibited unless functionally required in specific exempted devices such as batteries, fluorescent lamps, or weapon systems, and when used, must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract mandates adherence to DLA packaging requirements and hazardous materials shipping protocols, with transportation details governed by DLAD Proc Notes C19 and C20. The unit of issue is each, priced at $92.00 per unit, totaling $8,464.00, and the required delivery date is March 14, 2026, with an original ship date of January 13, 2026. The contracting office is under the Department of Defense, Land Supply Chain, with primary contact information provided for inquiries.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract is for the procurement of 410 helical compression springs identified by NSN 5360-00-953-9554 and part number 49223, supplied by B E AEROSPACE INC. SERVICES DIV. The item must be delivered within 20 days FOB origin with no tolerance for quantity variance. All supplies must comply with stringent environmental restrictions, including a complete prohibition on ozone-depleting chemicals and the intentional use of mercury or mercury-containing compounds, except for specific functional applications authorized by NAVSEA, such as batteries, fluorescent lights, and certain instruments, which must meet additional containment and safety standards. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all packaging must adhere to MIL-STD-2073-1E with specific handling, wrapping, and marking requirements in accordance with MIL-STD-129. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery destination is a U.S. military facility in Geilenkirchen, Germany, with designated freight forwarding and marking instructions provided. The contract is part of a solicitation issued under SPE7L1-26-T-854B with a response deadline set for July 31, 2026, and the item falls under NAICS code 332613 for spring manufacturing.
Spring Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
LINK SPRINGThe contract pertains to the procurement of five LINK SPRING units identified by NSN 2530-01-086-5262 under solicitation SPE7L1-26-T-852R, with a firm delivery deadline of 20 days from the award date and a required delivery date of July 16, 2026. The items must be delivered FOB origin with no variance in quantity accepted, inspected and accepted at destination, and packaged in strict compliance with DLA’s master technical and quality requirements, overriding all other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials requiring compliance with TQ requirement IP025 per FED-STD-313. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be pre-approved unless explicitly authorized by the specification. Shipment must be sent via traceable freight, not parcel post, to the designated Homestead Air Force Base address, with the unit of issue being each. The contract emphasizes full and open competition, and all requirements referenced via R or I numbers are governed by the DLA Master List effective as of the solicitation issue date. The point of contact for inquiries is Kristina Derry, and the solicitation’s response deadline is July 31, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUSThe contract pertains to the procurement of five protective plugs, part number 5340-01-643-7659, under solicitation SPE7L1-26-T-853C, with a required delivery date of July 17, 2026, and a five-day delivery window from origin. Each unit is priced at $5.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Hazardous materials require packaging per IP025, while non-hazardous items must follow ASTM D3951. Palletization must meet RP001 standards, and each unit pack contains one item. Shipping must be via the fastest traceable method; parcel post is prohibited. The freight delivery address is the Portsmouth Naval Shipyard in Kittery, Maine, while the parcel post address is in Portsmouth, New Hampshire. The contract specifies government-only use identifiers and mandates compliance with all DLA documentation, source approval, and quality requirements referenced by R and I numbers. The unit of issue is the individual unit, and the purchasing entity is the DLA under the Department of Defense.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRESThe contract pertains to the procurement of 268 helical compression springs with NSN 5360-00-952-0181, issued under solicitation SPE7L1-26-T-853M by the Department of Defense through the Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the acquisition size and date of solicitation or amendment. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery schedule requires fulfillment within 240 days after award, and the place of performance is listed as Phoenix, Arizona, with a zip code of 85043. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a NAICS code of 332510 for spring manufacturing. Primary point of contact is Derek Roberts, reachable via email and phone provided, and all submissions must be made through the DIBBS portal.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
RING, SUPPORT, TRANSMThe contract pertains to the procurement of one unit of a transmission support ring with NSN 2520-41-000-6496 and part number 2174992/1, issued under solicitation SPE7L1-26-T-853F by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days to a FPO address in the Pacific, with FOB destination terms, and no variance is permitted in quantity. The item must comply with DLA packaging standards and MIL-STD-2073-1E for preparation, with specific packaging methods including preservative treatment type 31, wrap material GH, and packaging code U. Marking must adhere to MIL-STD-129 and ASTM D5445 for handling pictorials, and the contractor must validate the package design to ensure safe delivery under DOD requirements, with failure to meet criteria requiring redesign at no cost to the government. The product is exempt from shelf life requirements and strictly prohibits the use of Class I ozone-depleting chemicals, superseding any conflicting specification but maintaining all product performance standards. Hazardous materials packaging provisions apply, and all technical and quality requirements referenced via R or I numbers are governed by the DLA Master List as of the solicitation issue date. Shipping instructions reference DLAD Proc Notes C19 and C20, and the contractor must use the VSM system. The point of contact is Kristina Derry, with a response deadline of July 31, 2026, and an original delivery requirement of July 16, 2026.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BLOCK, APEXThis contract, identified as BLOCK,APEX under solicitation SPE7L1-26-T-852Z, pertains to the procurement of two units of material designated by NSN 5340-20-002-3155 and part number 200-1318-101, with a unit price of $2.00 per item and a total contract value of $4.00. Delivery must be completed within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The product must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization and packaging materials must adhere to specified standards, and shipment must be sent by traceable means excluding parcel post. The delivery is directed to two locations: a parcel post address in FPO AE 09627-1100, USA, which must not be used for shipping, and a freight shipping address at Sigonella, Italy, with detailed building and contact information included. The required delivery date is July 16, 2026, and the solicitation response deadline is July 31, 2026. The contract falls under NAICS code 332510 and is managed by the U.S. Department of Defense’s Land Supply Chain. Technical specifications are tied to DLA’s official standards and revisions in effect at the time of solicitation, and all substitutes or alternative materials require prior approval unless explicitly authorized by the specification. The contract includes specific government-only identifiers for internal tracking and reporting purposes.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
HANDWHEELThe contract specifies the procurement of a handwheel with NSN 5340011791733 under solicitation SPE7L1-26-T-853G, requiring a total quantity of six units—four units under CLIN 0001 and two units under CLIN 0002—each priced at $1.00, with a firm fixed price and zero variance allowed. Delivery is due within 20 days from the required delivery date of July 16, 2026, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, with non-hazardous items packaged per ASTM D3951 unless superseded by stricter DLA Master List technical and quality requirements. Hazardous materials must meet IP025 specifications. Sampling and quality verification follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and inspection must result in zero non-conformances unless otherwise stated. The item is subject to MIL-STD-130N identification and may require casting or forging, for which the contractor must seek assistance through DLA’s designated channels if tooling is not available. Shipping must use traceable methods only, with distinct destination addresses for each CLIN—one at Homestead AFB, Florida, and the other at Portland, Oregon. The contract is issued by the Department of Defense’s Land Supply Chain, with point of contact Michael Nordahl, and aligns with NAICS code 333612 for specialized machinery manufacturing.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
O-RINGThis contract is for the procurement of nine O-Rings identified by NSN 5331-00-469-6840, with a delivery requirement of five days after award. The solicitation number is SPE7L1-26-T-853W, issued by the Department of Defense through the Land Supply Chain, with performance located at Tinker AFB, Oklahoma, 73145-9031. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The contract mandates strict adherence to DLA packaging standards and prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements while still enforcing all product performance standards. Substitute chemicals require prior approval unless explicitly authorized. Asbestos is strictly prohibited in all delivered items, and any alternative materials must be approved under Clause L30 and Provision 4 conditions. Contractors must retain supply chain traceability documentation as outlined in DLAD Procurement Note C03 from August 2016. A Source Approval Request must be submitted with supporting documentation, and all non-accepted supplies must have government identification removed prior to disposal or return. The response deadline is July 31, 2026, and point of contact is Kristina Derry at DLA, reachable via email and phone provided.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of a mounting bracket identified by NSN 5340-01-685-5071 and part number 2217419-001, with a quantity of two units to be delivered within 20 days under solicitation SPE7L1-26-T-852X. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements referenced from the DLA Master List, including prohibitions on Class I ozone-depleting chemicals, which override any conflicting specifications but do not reduce product performance expectations. Packaging must follow MIL-STD-2073-1E and DLA packaging guidelines, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization and unit packaging are specified with precise codes, and shipping must use traceable means—parcel post is strictly prohibited. The delivery destination and freight address are both listed as Holloman Air Force Base, New Mexico, with a required delivery date of July 16, 2026. The contract includes specific procurement and unit of issue details aligned with DoD standards, and the point of contact for inquiries is Kristina Derry of the Department of Defense’s Land Supply Chain.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details