Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

HANDLE, MANUAL CONTR

Awarded
SPE7L1-26-T-5689Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded a fixed-price contract to KONGSBERG DEFENCE & AEROSPACE AS, identified by CAGE code N0013, for the delivery of 22 manual control handles under NSN 5340-01-695-8196, with a total contract value of $3,938.00. The award, issued on July 15, 2026, under solicitation SPE7L1-26-T-5689, carries a firm delivery date of August 19, 2027, and requires the contractor to meet strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with preservation method 10 and dry climate controls. The delivery point is DLA San Joaquin in Tracy, California, under FOB ORIGIN terms, and all items are subject to government inspection and acceptance at the destination. Payment is processed exclusively through the Wide Area WorkFlow system, with invoicing tied to the SL4701 payment code and remittance directed to a Columbus, Ohio address. The contract incorporates numerous Federal Acquisition Regulation clauses concerning cybersecurity, supply chain security, antiterrorism training, prohibitions on certain technologies including Kaspersky and ByteDance products, and small business utilization, affirming the contractor’s status as a Women-Owned Small Business. Technical compliance is further governed by referenced documents RA001 and RP001, which define quality and packaging requirements that are incorporated by reference. No option quantities or extensions are included, and the contract is structured as a single-line fixed-price delivery order with zero variance allowance. A DPAS rating under H18 may provide priority for material sourcing or production as a defense priority. The administrative contracting officer is Roger Waldron, reachable through DLA Land – Post-Award, while no contracting officer’s technical representative is listed. The contractor must also comply with all applicable maritime transport statutes and counterfeit parts prevention regulations.

General Info

KONGSBERG to supply manual control handle for $3,938 under DLA contract issued July 15, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$3,938

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

KONGSBERG DEFENCE & AEROSPACE ASView Profile

Award Issued Date

Documents

(1)

SPE7L126P9058.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
DLA award SPE7L126P9058 posted on DIBBS. Awardee: KONGSBERG DEFENCE & AEROSPACE AS (CAGE N0013) Total Contract Price: $3,938.00 Award Date: 07-15-2026 Solicitation: SPE7L1-26-T-5689 Line items: - HANDLE, MANUAL CONTR (NSN/Part 5340016958196, PR 7014656196)

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
FASTENER SNAP ASSEM
Solicitation # SPE4A6-26-T-26RJ
Solicitation SPE4A6-26-T-26RJ, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 45 units of Fastener Snap Assemblies under NSN 5325-01-191-3418. Each assembly is a commercial item consisting of one metallic eyelet (P/N MS27980-8B), one cap snap fastener (P/N MS27980-2B), one stud snap fastener (P/N MS27980-7B), and one socket snap fastener (P/N AN227-7B). The hardware must be manufactured to the current revision of the defining military part standard, specifically referencing Technical Data Package BASIC UNK AN227 Revision 9 dated February 14, 2019. Delivery is required within 20 days after receipt of order to a consignee in Spangdahlem, Germany, with inspection and acceptance occurring at the destination. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment must be processed electronically through the Wide Area WorkFlow system. The solicitation allows for a price evaluation preference for certified HUBZone Small Business Concerns and explicitly prohibits the use of additive manufacturing for the produced items.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
WHEEL, SOLID, METALLIC
Solicitation # SPE7LX-26-U-9815
Solicitation SPE7LX-26-U-9815 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate. The requirement is for the procurement of 56 metallic solid wheels, identified by NSN 5340010635825. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 8 units, and a minimum delivery order quantity of 14 units. Delivery is expected within 210 days after receipt of the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to several technical and regulatory standards, including CMMC Level 2 certification and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific attention to special packaging instruction AK10635825. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2418
Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.
Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS