Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HANDLE, MANUAL CONTROL

Active
SPE7L1-26-T-13G6Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Request for Quotations (RFQ) issued by DLA Land and Maritime involves the procurement of 32 manual control handles, identified by NSN 5340-01-438-2335. The solicitation, numbered SPE7L1-26-T-13G6, was posted on September 17, 2026, with a response deadline of September 28, 2026, via the DLA Internet Bid Board System (DIBBS). The contract is not a small business set-aside and falls under NAICS code 336390. The required delivery timeframe is 120 days after award, with a target ship date of January 27, 2027. Delivery is designated as FOB Destination, with inspection and acceptance occurring at the destination facility in New Cumberland, PA. The contract incorporates extensive technical and quality requirements from the DLA Master List, including specific mandates for packaging, marking, and labeling. If the material is deemed hazardous under FED-STD-313, it must follow TQ requirement IP025 and include labeling compliant with the Hazard Communication Standard; otherwise, it must be commercially packaged per ASTM D3951. All packaging must be marked according to MIL-STD-129, and palletization must adhere to RP001. Significant regulatory compliance is required, covering cybersecurity (DFARS 252.204-7012), the Buy American Act, and prohibitions on certain toxic materials and hexavalent chromium. Contractors are required to use the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Offerors are encouraged to submit quantity ranges due to demand volatility and must disclose any hazardous materials and provide Safety Data Sheets prior to award.

General Info

DLA Land and Maritime seeks quotes for 32 manual control handles by September 28, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-13G6 Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Deadline changed

Response deadline changed from Sep 28, 2026 to Oct 1, 2026.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressUSA
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HANDLE,MANUAL CONTROL
HANDLE,MANUAL CONTROL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
VSE CORPORATION 31902 P/N 12461862
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018379371 0001 EA 32.000
NSN/MATERIAL:5340014382335
DELIVERY (IN DAYS):0120
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7L1-26-T-13G6
SECTION B
PR: 7018379371 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/27/2027 Original Required Delivery Date:01/27/2027
SPE7L1-26-T-13G6 NSN/Part Number: 5340-01-438-2335 Quantity: 32 EA Purchase Request: 7018379371QTY: 32 Delivery: 120 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
Manufacturing and Supply of Vehicle Baggage Racks (NSN 2590015987710)This subcontract involves the manufacturing and supply of finished vehicle baggage racks for prime contractors supporting the ASC Commodities Division of the Department of Defense. The contractor is responsible for fabricating racks according to the technical specifications for NSN 2590015987710, adhering to the DLA Master List of Technical and Quality Requirements and the specific technical data package. Production requires the use of specialized tooling for vehicle-mounted racks to ensure compliance with all quality standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336390, with performance taking place in New Cumberland. Interested parties must respond by October 6, 2026, to provide the physical baggage racks as required by the agency.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
Supply of Vehicular Control Arms (IVECO P/N 5801981350)This subcontract, managed by the Department of Defense Land Supply Chain, requires the procurement of three IVECO Defence Vehicles S.P.A. A4249 vehicular control arms, part number 5801981350. The supplier must ensure all units meet Critical Application Item quality standards and adhere to specific packaging and marking guidelines established by MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. Additionally, the provider must comply with DFARS 252.225-7048 export controls. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336390, with performance located in New Cumberland, Pennsylvania. Interested parties must submit responses by October 9, 2026, to support prime contractors delivering these essential components for DLA supply contracts.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-9165
Solicitation SPE7M3-26-T-9165, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 42 units of pipe-to-tube elbows, identified by NSN 4730-01-006-0752. The procurement falls under NAICS code 336390 and requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of March 24, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while specifying that the DLA Master List of Technical and Quality Requirements and RP001 for palletization take precedence. Offerors must submit quotes via the DIBBS system and are encouraged to provide quantity ranges due to demand volatility. The solicitation incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, sustainable products, and safeguarding covered defense information. Payment processing is to be handled electronically through the Wide Area WorkFlow system.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-415Y
Solicitation SPE7M4-26-T-415Y is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of five units of nonmetallic hose, identified by NSN 4720014197066 and Electric Boat Corporation part number 211071921A. Each unit of issue is equivalent to 144 inches. The required delivery date is May 3, 2027, with a delivery window of 216 days after receipt of order. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must follow DLA requirement RP001. Technical specifications prohibit the intentional addition of mercury or mercury-containing compounds and state that Level 1/SUBSAFE requirements do not apply. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned for critical, major, and minor attributes. Administrative requirements include the use of Wide Area Workflow for invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of additive manufacturing unless specifically authorized.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
RACK, BAGGAGE, VEHICU
Solicitation # SPE4A6-26-T-37JS
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
ASSY BOX BII FWD
Solicitation # SPE7L4-26-T-7269
Solicitation SPE7L4-26-T-7269 is a request for quotation issued by the DLA Land and Maritime LSO Combat Vehicles and Armament for the procurement of two units of ASSY BOX BII FWD, identified by NSN 2540-01-597-5630 and Daimler Truck North America part number A22-65779-100. The procurement falls under NAICS code 336390. The original required delivery date is September 25, 2026, with a delivery timeframe of five days after receipt of order. The items are to be shipped to the Field Maintenance Shop in Mason City, Iowa. The contract specifies destination inspection and acceptance. Packaging must adhere to ASTM D3951 for commercial packaging and RP001 for palletization, while all marking and labeling must comply with MIL-STD-129. Technical and quality requirements are governed by the DLA Master List. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity reporting requirements under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit their quotes via the DIBBS portal by October 9, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
INSULATION BLANKET,
Solicitation # SPE8E6-26-T-4748
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-T-13E9
Solicitation SPE7L1-26-T-13E9 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 17 fluid filter elements, identified by NSN 2940-01-422-5644 and Parker-Hannifin Corporation part number 946479. The procurement is categorized under NAICS code 336390 and requires delivery to the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The required delivery date and need ship date are both set for March 9, 2027, with a delivery period of 161 days. Shipping is designated as FOB Origin under the First Destination Transportation program, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental and safety restrictions are highlighted, specifically prohibiting the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Contractors must comply with the Hazard Communication Standard for labeling and provide Safety Data Sheets for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotations were due by September 28, 2026.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
LATCH COUPLER
Solicitation # SPE7L4-26-T-7005
Solicitation SPE7L4-26-T-7005 is a request for the procurement of one latch coupler, identified by NSN 2540-01-478-1207 and part number C909332. Issued by the DLA Land and Maritime LSO Combat Vehicles and Armament, the contract falls under NAICS code 336390. The required delivery date and need ship date are both set for July 20, 2027, with a delivery window of 294 days after order. The item is to be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials identified per FED-STD-313 require packaging according to TQ requirement IP025. All DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. The solicitation also incorporates various FAR and DFARS clauses regarding human trafficking, sustainable products, and cybersecurity safeguarding of covered defense information.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-U-6950
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-T-13G0
This Request for Quotations (RFQ) issued by DLA Land and Maritime under solicitation SPE7L1-26-T-13G0 is for the procurement of 77 fluid filter elements, identified by NSN 2940-01-383-2287. The procurement is categorized under NAICS code 336390 and requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required ship date of March 7, 2027. The contract is subject to strict technical and quality requirements found in the DLA Master List, and it explicitly prohibits the use of Class I ozone-depleting substances in any manufacturing or testing processes unless written approval is obtained. Additionally, the use of additive manufacturing for these parts is not authorized without specific written consent from the contracting officer. The solicitation incorporates several critical regulatory and compliance standards, including the Buy American and Balance of Payments program, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and DLA packaging requirements (RP001), while all marking and labeling must comply with MIL-STD-129. Specific protocols are in place for the labeling of hazardous and radioactive materials. Administrative procedures require the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Offerors must also provide representations regarding covered defense telecommunications equipment and comply with all domestic material disclosure requirements.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
INTERCONNECTING BOX
Solicitation # SPE4A7-26-T-776E
Solicitation SPE4A7-26-T-776E is a request for quotations issued by DLA Aviation for the procurement of 13 Interconnecting Boxes, identified by NSN 5895-01-528-1514. This item is a critical application part specific to the MRAP Caiman. The procurement requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with an original required delivery date of June 27, 2027, and a delivery lead time of 168 days after award. Inspection and acceptance are both set at the destination. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances for certain plans. Additionally, the award is subject to the Buy American Act, Berry Amendment, and various FAR and DFARS clauses regarding trafficking in persons, hazardous material identification, and the prohibition of certain telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488410
New
DIBBS
Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports prime contractors on DLA supply contracts through specialized packaging and preservation. The scope includes executing non-hazardous commercial packaging according to ASTM D3951 and hazardous packaging per FED-STD-313 and TQ requirement IP025, using materials that comply with the DLA Master List of Technical and Quality Requirements. Finished products are delivered FOB Origin to the designated destination inspection point. Managed by the Department of Defense Land Supply Chain, the contract falls under NAICS code 488410 and is performed in Tracy, California. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026.
Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Fabrication and Supply of Mounting Bracket (NSN 5340016822391)This subcontract with the Department of Defense Land Supply Chain involves the fabrication and supply of one critical application mounting bracket under NSN 5340016822391. The contractor is required to perform precision machining in accordance with TDP Rev A Gen 6 and Drawing 53711 8598310, utilizing specialized precision machining equipment. Compliance with DFARS 252.225-7001 is mandatory, and the final product must be delivered fully inspected, marked, and packaged. Technical requirements include identification marking per MIL-STD-130N and quality sampling conducted according to MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 332710 and is to be performed in Tracy, California. The response deadline for this opportunity is October 9, 2026.
Machine Shops

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325211
New
DIBBS
Supply of O-Rings (NSN 5331-01-425-0832)This subcontract involves the supply of O-Ring components specifically meeting NSN 5331-01-425-0832 specifications to support prime contractors delivering DLA supply contracts for the Department of Defense Land Supply Chain. The contractor is responsible for manufacturing or sourcing one unit of the O-Ring, ensuring all containers are marked and labeled according to MIL-STD-129 and hazardous material unit containers comply with 29 CFR 1910.1200. The performance of this contract takes place in San Diego, California, with delivery terms set as FOB Origin. Under NAICS code 325211, the opportunity was posted on September 28, 2026, with a response deadline of October 9, 2026.
Plastics Material and Resin Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488210
New
DIBBS
Freight and Logistics Services (Pearl Harbor Delivery)This subcontract for Freight and Logistics Services involves the transportation and delivery of protective caps for prime contractors supporting Land Supply Chain projects. The service provider is responsible for coordinating shipments from the point of origin to Hawaii, utilizing shipping containers and palletized transport, with final delivery to the Pearl Harbor Naval Shipyard IMF. All operations must strictly adhere to sea transportation regulations as specified by DFARS 252.247-7023. The opportunity is designated as a total small business set-aside under NAICS code 488210 and is managed by the Department of Defense. The response deadline for this requirement is October 9, 2026, with the primary place of performance located in Pearl Harbor, Hawaii.
Support Activities for Rail Transportation

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Supply of Protective Dust CapsThis subcontract under the Land Supply Chain of the Department of Defense involves the manufacture and sourcing of protective dust caps according to strict government specifications. The contractor is responsible for ensuring all items are marked per MIL-STD-129 and packaged and palletized in accordance with RP001 DLA Packaging Requirements for Procurement. All finished products are to be delivered to the Pearl Harbor Naval Shipyard IMF. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. The response deadline for this requirement is October 9, 2026, with the place of performance located in Pearl Harbor, Hawaii.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
Supply of Retaining Clips (NSN 5340016763241)This subcontract involves the manufacture or sourcing of ten retaining clips under NSN 5340016763241 for prime contractors supporting DLA Land and Maritime supply contracts. The supplier must ensure all items adhere to the DLA Master List of Technical and Quality Requirements and comply with NIST SP 800-171 standards. Packaging must be completed according to ASTM D3951 or TQ IP025, with labeling following MIL-STD-129 specifications. The contract requires delivery of the units FOB Destination to the designated performance location in FPO 96677.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
O-Ring Component SupplierThis subcontract under the Department of Defense Land Supply Chain involves the procurement or manufacture of O-ring components identified by NSN 5331014248854. The supplier is responsible for ensuring that all materials meet the specific standards associated with the NSN and that all marking is performed in strict accordance with MIL-STD-129. Completed components must be delivered to the designated destination in San Diego, California. The opportunity is categorized under NAICS code 332999 and was posted on September 28, 2026, with a response deadline of October 9, 2026. This contract serves prime contractors who are delivering supply contracts to the Defense Logistics Agency.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322221
New
DIBBS
Specialized Packaging and HazMat LogisticsThis subcontract for Specialized Packaging and HazMat Logistics supports prime contractors on DLA supply contracts by providing packaging materials and professional packing and labeling services. The contractor is responsible for ensuring all items are packed according to RP001 and FED-STD-313 standards, with MIL-STD-129 marking applied to all shipments. Additionally, the contractor must adhere to TQ Requirement IP025 for the handling of hazardous materials to ensure all shipments are ready for FOB Origin transport. The opportunity is issued by the Department of Defense Land Supply Chain and is based in San Diego, California. It falls under NAICS code 322221, with a response deadline of October 9, 2026.
Coated and Laminated Packaging Paper Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of NSN 0157-48112 ComponentThis subcontract involves the manufacturing of aerospace grade guidance and navigation components, specifically NSN 0157-48112, for prime contractors under Department of Defense Land Supply Chain contracts. The provider is responsible for utilizing precision machining or additive manufacturing via CNC machinery or industrial 3D printers to ensure all items meet strict DLA technical specifications. All deliverables must adhere to RP001 packaging requirements and MIL-STD-129 marking and labeling standards. The work is performed under NAICS code 332722 in San Diego, California, with a response deadline of October 9, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488410
New
DIBBS
MIL-STD-129 and MIL-STD-2073-1E Packaging ServicesThis subcontract with the Department of Defense Land Supply Chain provides specialized military packaging and marking services for prime contractors fulfilling DLA supply contracts. The scope of work includes executing marking according to MIL-STD-129 and packaging per MIL-STD-2073-1E, which encompasses cushioning, dunnage, and palletization in accordance with RP001 standards using compliant marking equipment. The final deliverables consist of properly marked and packaged units prepared for FOB Origin shipment to DLA Distribution New Cumberland. This opportunity falls under NAICS code 488410, with a response deadline of October 9, 2026, and performance located in New Cumberland, Pennsylvania.
Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
Manufacture of Critical Safety Item (CSI) Grooved Clamp CouplingsThis subcontract involves the manufacture of 142 high-precision grooved clamp couplings, identified as NSN 5340017250509, for prime contractors supporting Navy and DLA projects. The components are classified as Critical Safety Items and must be fabricated from 303 CRES stainless steel in accordance with ASTM A582, AMS 5638, or AMS 5640, ensuring qualification to MIL-C-22263 and AS1650 standards. To be eligible, the manufacturer must hold SAE AS9100 certification and obtain Engineering Source Approval from the Government Design Control Activity. Additionally, the provider must maintain compliance with DFARS 252.204-7012. The project is managed under the Department of Defense Land Supply Chain, with performance taking place in New Cumberland, Pennsylvania.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336350
New
DIBBS
Supply of Tandem Axle Torque RodsThis subcontract with the Department of Defense Land Supply Chain involves the supply of two tandem axle torque rods meeting NSN 2530015588878 specifications. The contractor is responsible for manufacturing or sourcing hardware of domestic origin and implementing strict quality control measures. Performance will take place in Johnstown, Pennsylvania, under NAICS code 336350. Logistical requirements include packaging non-hazardous materials according to ASTM D3951 and palletizing per RP001. All shipments must be labeled in accordance with MIL-STD-129. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS