Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hardware and Software upgrade to Gerber DCS-2600 Cutter in support of Naval Clothing and Textile Research Facility (NCTRF). This effort will be performed at NATICK, MA

Active

N0018917QG195Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Fleet Logistic Center in Groton, Connecticut plans to award a sole source purchase order to Gerber Scientific, Inc. for hardware and software upgrades to the DCS-2600 Cutter used at the Naval Clothing and Textile Research Facility in Natick, Massachusetts. The procurement will be conducted under the Simplified Acquisition Procedures as per FAR Part 13 and issued on an Other than Full and Open Competition basis authorized by FAR 6.302-1. The anticipated award date for this purchase is September 15, 2017. This contract is specifically aimed at enhancing the capabilities of the cutter at NCTRF to support naval clothing and textile research needs. The solicitation number is N0018917QG195, and the work will be performed at the Natick facility. The notice clarifies that it is not a request for offers and that the government retains discretion over whether to compete the procurement based on responses to the notice. The NAICS code associated with this contract is 333515, which relates to manufacturing cutting tools.

General Info

Sole source contract to Gerber Scientific for DCS-2600 Cutter upgrades at Natick, MA.

Agency

N/A

NAICS

333515 - Cutting Tool and Machine Tool Accessory Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 12

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

The Fleet Logistic Center, Groton, CT office intends to award a sole source purchase order to Gerber Scientific, Inc. to procure hardware and software upgrades for the DCS-2600 Cutter at NCTRF, Natick, MA. This purchase will be done under the Simplified Acquisition Procedures (FAR Part 13) and Other than Full and Open Competition as authorized under FAR 6.302-1. The anticipated award date is 15 September 2017. This notice is not a request for offers. A determination not to compete this procurement based on responses to this notice is solely within the discretion of the Government.

Similar Contracts

Same NAICS industry code

Manufacturing of Synchro Transmitters (Moog PN: CGH-10-AS-7)This subcontract involves the manufacture and supply of 96 Synchro Transmitters, specifically Moog part number CGH-10-AS-7 and NSN 5990006171105, for the DLA Weapons Support Active Devices Division. The scope of work encompasses precision machining, winding, and the assembly of stators, rotors, and electromagnetic transducers. All units must be calibrated according to the DLA Master List of Technical and Quality Requirements RA001 utilizing specialized electromagnetic testing and winding rigs. The project is performed at Hill AFB and requires strict adherence to security and regulatory standards, specifically CMMC Level 2 and DFARS 252.204-7012 compliance. The contract falls under NAICS code 333515 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Spur Gears (NSN 3020011192287)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or procurement of 192 spur gears identified by NSN 3020011192287. The contractor must ensure all units comply with MIL-STD-2073-1E packaging data standards and maintain a valid CAGE code and UEI. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515. Delivery is coordinated under FOB Origin terms for Government-Arranged Transportation, with the origin point located in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026, to support prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Gear Cluster (NSN 3020-01-308-5495) SupplierThis subcontract involves the supply of 12 Gear Cluster assemblies for prime contractors supporting DLA Weapons Support projects. The supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 3020-01-308-5495 and General Dynamics-OTS P/N 10048058. Due to the nature of the components, the work requires the use of precision gear machining equipment to satisfy Critical Application Item quality standards. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency, with performance located in Tracy, California. Because the contract involves Controlled Technical Information, the supplier must maintain compliance with DoD Instruction 5230.24. The procurement falls under NAICS code 333515, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

Gearshaft (Multiple Gears) SupplierThis subcontract involves the manufacture or sourcing of specialized gearshafts, specifically identified by NSN 3040-01-556-4201, to support prime contractors fulfilling DLA supply contracts for the Department of Defense. The supplier is responsible for delivering two units of gearshafts and multiple gears produced via precision machining. Strict adherence to military standards is required, including domestic origin mandates and compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, alongside RP001 requirements. The opportunity is managed under NAICS code 333515 for the DLA Weapons Support Land Supply Chain, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

INSERT, CUTTING TOOL

Solicitation # SPE8E5-27-T-0402

Solicitation SPE8E5-27-T-0402 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of cutting tool inserts, specifically identified by NSN 3455-01-044-8027 and Kennametal part number NG-3062R/K420. The requirement consists of one package containing 10 individual inserts. The items must be marked with the material grade of which they are made and packaged according to ASTM D3951 and DLA packaging requirement RP001, with all labeling adhering to MIL-STD-129. Delivery is required within 20 days after order, with an original required delivery date of October 27, 2026, shipped FOB Origin to a facility in Fort Wayne, Indiana. The contract is governed by a comprehensive set of FAR and DFARS clauses, including destination inspection requirements under FAR 52.246-1 and fixed-price supply regulations. Key compliance mandates include the Buy American Act, the Berry Amendment, and strict cybersecurity standards such as NIST SP 800-171 and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via DIBBS and provide necessary representations regarding small business status and the use of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

INSERT, CUTTING TOOL

Solicitation # SPE8E5-27-T-0399

Solicitation SPE8E5-27-T-0399 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 10 cutting tool inserts, identified by NSN 3455013054054. The requirement is for a specific part number, NG2031R KCU25 from Kennametal Inc. Delivery is required within 20 days after receipt of order, with an original required delivery date of October 27, 2026. The shipment is designated as FOB Origin and will be delivered to a facility in Fort Wayne, Indiana. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS) under NAICS code 333515. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity, hazardous material identification, and domestic sourcing restrictions, including the Buy American Act and the Berry Amendment.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

WHEEL SET, ABRASIVE

Solicitation # SPE8E5-27-T-0398

Solicitation SPE8E5-27-T-0398 is a request for quotations for the procurement of nine abrasive wheel sets, identified by NSN 3460-01-629-7924. The contract is issued by the DLA Troop Support Construction and Equipment office and is designated as a total small business set-aside under FAR 19.5. Delivery is required within 138 days after receipt of order, with an original required delivery date of December 22, 2026, and a need ship date of March 28, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001), safeguarding of covered defense information (DFARS 252.204-7012), and hazardous material labeling in accordance with 29 CFR 1910.1200. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

HAAS ST45 L CNC Lathe Hydraulic Steady Rest Kit SupplierThis subcontract opportunity is for the supply of a direct bolt-on hydraulic steady rest kit designed for a HAAS ST45 L CNC lathe. The kit must be fully compatible with factory steady rest provisions and include the steady rest unit, mounting brackets, and hydraulic lines. All equipment must adhere to HAAS factory specifications and maintain Section 889 compliance to support prime contractors on US Army Corps of Engineers ERDC projects. The contract is issued by the Department of Defense through the W2R2 USA Engr R & D Ctr, with performance taking place in Vicksburg, Mississippi. This is a total Small Business Set Aside under NAICS code 333515. Interested parties must submit their responses by November 9, 2026, to provide one complete and operational hydraulic steady rest kit.

W2R2 USA Engr R & D Ctr

POSTED

about 12 hours ago

DEADLINE

Hydraulic Steady Rest Kit

Solicitation # W912HZ27QA011

Solicitation W912HZ27QA011 is a simplified acquisition request for quote issued by the Department of Defense for the W2R2 USA Engr R & D Ctr. The requirement is for one direct bolt-on hydraulic steady rest kit compatible with a HAAS ST 45 L CNC lathe. The kit must include the steady rest, hydraulic lines, mounting brackets, and all necessary ancillary parts to support workpieces with diameters from 6 to 10 inches. The basis of design is Kitagawa Kit A or an equivalent that meets or exceeds its load limits and specifications. This is a total small business set-aside under NAICS code 333515. The contract is awarded to the responsible offeror whose proposal is most advantageous to the government based on technical acceptability and price. Delivery is required within 10 weeks of the award date, with a final deadline of January 29, 2027. Terms are FOB Destination to the Waterways Experiment Station - ERDC in Vicksburg, Mississippi, and the contractor is responsible for all shipping costs. Compliance requirements include providing DoD unique identification for the kit and utilizing the Wide Area WorkFlow system for payment requests and receiving reports. Offerors must maintain active registration in the System for Award Management to be eligible for award.

W2R2 USA Engr R & D Ctr

POSTED

about 12 hours ago

DEADLINE

Supplier of Drill Chuck (NSN 3460-01-645-5162)This subcontract involves the procurement or manufacture of one drill chuck matching NSN 3460-01-645-5162 for prime contractors supporting Defense Logistics Agency supply contracts. The selected supplier must ensure the item adheres to the DLA Master List of Technical and Quality Requirements and follows specific packaging and palletization standards, including ASTM D3951, MIL-STD-129, and RP001 guidelines. The final product is to be delivered FOB Origin to the NV ARNG CSMS 2 facility located in Las Vegas, Nevada. This opportunity falls under NAICS code 333515, with a response deadline set for November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Magnesium Alloy Welding Rods (NSN 3439-00-262-4285)This subcontract involves the supply of magnesium alloy welding rods, identified by NSN 3439-00-262-4285, for prime contractors delivering to the Defense Logistics Agency. The required rods must measure 3/16 inch in diameter and 39 inches in length. The supplier is responsible for manufacturing or sourcing the materials and ensuring strict adherence to MIL-STD-129 marking and RP001 packaging standards, which includes the application of mandatory radiation warning labels due to thorium content. The contract requires full compliance with the Buy American Act and the Berry Amendment. The scope of work entails the delivery of five cartons of welding rods FOB Origin to Fort Riley, Kansas. This procurement falls under NAICS code 333515 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Tooling Design and FabricationThis subcontract for Specialized Tooling Design and Fabrication supports the Department of Defense through the DLA Weapons Support ASC. The scope of work involves the design and manufacture of custom tooling, molds, and dies specifically for the casting and forging of Air Director Ducts. Utilizing CNC machining and EDM, the contractor must ensure all deliverables strictly adhere to the technical specifications outlined in the DLA technical data package before delivering the completed items to the manufacturer. The project is categorized under NAICS code 333515 and will be performed at Hill AFB. Interested parties should note the posting date of October 28, 2026, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

34--Box and Pan Brake

Solicitation # W912L7-17-Q-0005

POSTED

about 9 years ago

CLOSED

about 9 years ago

62--LIGHT,NAVIGATIONAL,

Solicitation # SPE8E717Q0068

POSTED

about 9 years ago

CLOSED

about 9 years ago

MASCHINE TOOL ACCESSORIES

Solicitation # SPMYM4-17-Q-0579

POSTED

about 9 years ago

CLOSED

about 9 years ago

E.H. Wachs Tooling

Solicitation # N39040-17-T-V021

Portsmouth Naval Shipyard Gf

POSTED

about 9 years ago

CLOSED

about 9 years ago

Haas VF-4 CNC Milling Machine

Solicitation # FA4659-17-Q-0046

FA5004 354 Cons Pk

POSTED

about 9 years ago

CLOSED

about 9 years ago

Horizontal Band Saw

Solicitation # W9127Q-17-T-0047

W7NH Uspfo Activity Ms Arng

POSTED

about 9 years ago

CLOSED

about 9 years ago

Expendable Tooling

Solicitation # FD20201751106

POSTED

about 9 years ago

CLOSED

about 9 years ago

ABRASIVE WATERJET CUTTING CENTER

Solicitation # 17-233-SOL-00775

POSTED

about 9 years ago

CLOSED

about 9 years ago

CNC ROUTER BITS

Solicitation # SPMYM417Q0512

POSTED

about 9 years ago

CLOSED

about 9 years ago

62--CONTROL,ELECTRIC LI

Solicitation # SPE8E717T0670

POSTED

about 9 years ago

CLOSED

about 9 years ago

Machine Tooling

Solicitation # W45PVN-17-Q2056

W6QM Micc-Fdo Ft Sam Houston

POSTED

over 9 years ago

CLOSED

about 9 years ago

36--3620-GASKET CUTTER

Solicitation # SPMYM217Q2304

DLA Maritime - Puget Sound

POSTED

over 9 years ago

CLOSED

over 9 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS