Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hardware/Component Supplier

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Hardware/Component Supplier, is issued by the Department of Defense under the Land Supply Chain ESOC Buys agency. The selected supplier will be responsible for manufacturing or sourcing end-items and components for prime contractors fulfilling DLA supply contracts. All materials must comply with the DLA Master List and RA001 general technical and quality requirements, with a specific mandate to provide domestic material disclosure for any non-domestic items. Physical supplies and components are to be delivered to designated DLA locations, with the place of performance centered in Chambersburg, Pennsylvania. Interested parties must submit their responses by September 28, 2026, in accordance with the solicitation posted on September 15, 2026. The contract falls under NAICS code 339999.

General Info

DoD subcontract for hardware components in Pennsylvania; responses due by September 28, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAIN ESOC BUYSView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

CHAMBERSBURG, PA, 17201-4150, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L0-26-T-0460.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE, IDENTIFICATION

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies end-items or components for prime contractors delivering DLA supply contracts. Manufactures or sources materials complying with the DLA Master List (R or I numbers) and RA001 general technical and quality requirements. Provides domestic material disclosure for non-domestic materials. Delivers physical supplies and components to designated DLA locations.

Similar Contracts

Same NAICS industry code

3D Foot Scanner for Boot Fitting

Solicitation # W911S226U4505

Solicitation W911S226U4505 is a Request for Quotation for the procurement of ten commercial-off-the-shelf, brand-agnostic Automated 3D Digital Footwear Fitting Systems and associated annual technical service. This acquisition is a Total Small Business Set-Aside intended to modernize the Clothing Initial Issue Point across Reception Battalions to eliminate manual sizing inaccuracies and reduce musculoskeletal injuries among trainees. The procurement includes the scanners, hard cases, foot pads, application fees, and software-to-hardware connection equipment. The systems must utilize non-invasive optical or sensor-based scanning to capture volumetric dimensions and pressure distribution in under 20 seconds, converting data into standard military combat boot sizing. The ten systems will be distributed among the 120th, 30th, 43rd, and 95th Adjutant General Battalions, with one unit held as an operational reserve float at the Brigade/LTB headquarters. This is a brand name or equal acquisition requiring new equipment only; equal products must meet all salient physical and functional characteristics and be supported by descriptive literature. Award will be based on price and technical factors, with quotes submitted exclusively through the PIEE Solicitation module. Delivery is preferred within 30 days on an FOB destination basis. Offerors must provide certifications regarding the country of origin to be considered responsive.

W6QM Micc-Ft Drum

POSTED

about 1 hour ago

DEADLINE

42--HYDROSTATIC RELEASE

Solicitation # SPE8E626T4655

DLA Troop Support

POSTED

about 1 hour ago

DEADLINE

Supply of Special Purpose Electrical Cable Assemblies (NSN 6150-00-910-7512)This subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the manufacture or sourcing of 82,000 special purpose electrical cable assemblies under NSN 6150-00-910-7512. The supplier must adhere to the DLA Master List of Technical and Quality Requirements and ensure all packaging complies with MIL-STD-2073-1E. Key requirements include the provision of full traceability documentation and a valid CAGE code registration. The contract is categorized under NAICS code 339999, with a response deadline of October 15, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

ASTM A700 Preservation and Packaging ServicesThis subcontract for the Department of Defense at the DDSP New Cumberland Facility involves providing specialized preservation, packing, and marking services for metal bars intended for DLA supply contracts. The contractor is responsible for applying preservation codes Z and ZZ according to ASTM A700 standards and ensuring all shipments are marked in compliance with MIL-STD-129. Using industrial packing materials and corrosion inhibitors, the service provider must ensure all packaging meets specific DLA depot requirements to deliver products ready for shipment. The opportunity was posted on September 15, 2026, with a response deadline of September 28, 2026. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 339999. This contract is designed to support prime contractors by ensuring that metal bars are properly preserved and marked for military logistics and supply chain integration.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense Maritime Supply Chain. The contractor is responsible for providing specialized military-grade packaging, marking, and palletization for resistors, ensuring all deliverables are ready for destination inspection. Work must be performed in accordance with MIL-STD-129 for markings, MIL-STD-2073-1E for packaging, RP001 for palletization, and IPC/JEDEC J-STD-609 for lead finish labeling. The project is based in San Diego, California, under NAICS code 339999. Interested parties must submit their responses by September 28, 2026, following the posting date of September 15, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Supply of Gaskets (NSN 5330008211949)This subcontract involves the manufacture or sourcing of 257 gaskets identified by NSN 5330008211949 for prime contractors supporting DLA Land and Maritime supply contracts. The supplier must ensure all units adhere to R or I technical specifications and comply with FAR 52.204-24 standards, utilizing rigorous quality control systems to verify that all DLA technical requirements are met. The final products are to be delivered to DLA Distribution in Cherry Point, North Carolina. This procurement is managed under the Department of Defense Maritime Supply Chain with a response deadline of September 28, 2026, and falls under NAICS code 339999.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Hardware/Supply ManufacturingThis subcontract for Hardware/Supply Manufacturing involves the production and supply of end-items for prime contractors under Department of Defense DLA supply contracts. The manufacturer must produce items in accordance with the DLA Master List of Technical and Quality Requirements and ISO 9001:2015 standards, while ensuring full adherence to the Buy American Act and the Berry Amendment. Eligible facilities must be capable of meeting DLA R or I number specifications and maintaining CMMC Level 2 and NIST SP 800-171 compliance. The contract, managed by the ASC Supplier Oper AE and AF Div, requires the delivery of finished physical supplies with a performance location in Tracy, California. The response deadline for this opportunity is September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-01-711-1921)This subcontract involves the manufacture or sourcing of 20 units of gaskets under NSN 5330-01-711-1921 for prime contractors delivering to the Department of Defense ASC Supplier Oper OEM Division. The supplier must ensure all units meet specific National Stock Number material specifications and adhere to DLA Quality Assurance and Inspection standards, as well as FAR 52.240-91 security prohibitions. The delivery of all 20 units is required within 110 days from the date of the order. This procurement falls under NAICS code 339999 and was posted on September 15, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThis subcontract for Hazardous Materials Packaging and Labeling Services supports prime contractors on ASC Supplier Oper AE and AF Div projects within the Department of Defense. The service provider is responsible for packaging items according to ASTM D3951 and RP001 DLA Packaging Requirements, ensuring all unit containers are properly prepared for shipment. A critical component of the contract involves applying Hazard Warning Labels to unit containers in strict accordance with the 29 CFR 1910.1200 Hazard Communication Standard. The work is performed in New Cumberland, Pennsylvania, under NAICS code 339999, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Specialized CapsThis subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the manufacture and supply of specialized caps for prime contractors supporting DLA supply contracts. The provider is responsible for ensuring all caps meet specific technical specifications and that all packaging is marked and labeled in accordance with MIL-STD-129. Additionally, the contractor must provide Safety Data Sheets as required by 29 CFR 1910.1200 and Federal Standard No. 313. All physical deliverables and required documentation must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The opportunity is categorized under NAICS code 339999, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture or sourcing of a nonmetallic hose assembly identified by NSN 4720999283326 for prime contractors supporting Maritime Supply Chain ESOC Buys projects. The supplier must ensure the assembly complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 packaging standards for delivery via Government-Arranged Transportation. The project is managed under the Department of Defense with a place of performance located in Texarkana, Texas. Interested parties must respond by September 28, 2026, for this requirement categorized under NAICS code 339999.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Source-Controlled Item Manufacturer/SupplierThis subcontract opportunity, issued by the Department of Defense Strategic Acquisition Program Directorate, seeks a manufacturer or supplier to provide specific end items for prime contractors fulfilling DLA supply contracts. The selected provider must strictly adhere to source-controlled drawings and RA001 technical and quality requirements, while maintaining status as an Approved Source on the drawing. Compliance with DFARS 252.204-7012 and CMMC Level 2 is mandatory for the delivery of physical items specified under CLIN 0001. The procurement is designated as a Total Small Business Set-Aside under NAICS code 339999, with performance located in New Cumberland. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS

Same awarding agency

Quality Control and Remediation ServicesThis subcontract for Quality Control and Remediation Services supports the Department of Defense Land Supply Chain ESOC Buys. The primary objective is to perform quality inspections and the removal of unauthorized government identification from supplies delivered by prime contractors. Specifically, the provider must execute RQ011 requirements to remove markings, stamps, and labels from non-accepted supplies while ensuring part integrity is maintained and items are verified against DLA Master List R and I requirements. The scope of work includes the delivery of certified inspection reports and the provision of cleaned supplies. Performance will take place in Chambersburg, Pennsylvania, under NAICS code 541690. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

DLA Compliant Packaging and LogisticsThe DLA Compliant Packaging and Logistics subcontract, posted on September 15, 2026, involves providing specialized packaging and preparation services for prime contractors delivering supplies to the Department of Defense. Operating under NAICS code 488510, the contractor is responsible for packaging deliverables in strict accordance with RP001 DLA Packaging Requirements for Procurement, utilizing crates, vacuum seals, and moisture barriers to ensure materials are preserved for transit according to military standards. The scope of work includes the delivery of supplies that are fully packaged and labeled for shipment, with the place of performance located in Chambersburg, Pennsylvania. Interested parties must submit their responses by the deadline of September 28, 2026, for this requirement managed by the Land Supply Chain ESOC Buys agency.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services supports prime contractors delivering supply contracts for the Department of Defense under the Land Supply Chain ESOC Buys agency. The service provider is responsible for specialized packaging, palletization, and labeling of items to ensure they are ready for FOB Origin transport. All work must strictly adhere to ASTM D3951 for packaging, RP001 DLA Packaging Requirements for palletization, and MIL-STD-129 for marking, utilizing industrial labeling systems and MIL-SPEC materials. The performance of these services will take place in Chambersburg, Pennsylvania. Interested parties must respond by September 28, 2026, in accordance with the solicitation posted on September 15, 2026. The contract falls under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Piston Pin Supplier/ManufacturerThis subcontract involves the supply of seven precision-machined piston pins for prime contractors supporting Department of Defense DLA supply contracts. The manufacturer is responsible for producing or sourcing pins for part 7018316576, utilizing precision grinding and machining equipment to ensure all units meet the dimensional accuracy and material strength standards defined in the DLA Master List of Technical and Quality Requirements. The contract requires the provision of certifications of conformance to verify quality standards. Performance for this requirement is based in Chambersburg, Pennsylvania, under NAICS code 332721. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, through the Land Supply Chain ESOC Buys agency.

Precision Turned Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

DLA Compliant Packaging and Shipping ServicesThis subcontract for DLA Compliant Packaging and Shipping Services, issued by the Department of Defense under the Land Supply Chain ESOC Buys agency, focuses on providing specialized packaging and logistics for prime contractors. The service involves packaging components, specifically brackets, using DLA-approved crates and moisture barriers in strict accordance with RP001 packaging requirements. The performance of this contract takes place in Texarkana, Texas, under NAICS code 484110. Logistics operations are coordinated under FOB Origin terms and are integrated with the First Destination Transportation program to ensure all items are properly marked and delivered. The response deadline for this opportunity is September 28, 2026.

General Freight Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Vehicular Component Bracket ManufacturingThis subcontract for the Department of Defense, specifically the Land Supply Chain ESOC Buys, involves the manufacture of vehicular component brackets for prime contractors supporting DLA supply contracts. The work is performed in Texarkana, Texas, utilizing CNC machining, stamping, or welding to fabricate brackets in accordance with the DLA Master List of Technical and Quality Requirements RA001. The contract requires strict adherence to specific regulatory standards, including DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium, and DFARS 252.225-7048 regarding export control. This opportunity falls under NAICS code 332510, with a response deadline of September 28, 2026.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

BRACKET, VEHICULAR COMP

Solicitation # SPE7L0-26-T-0459

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE7L0-26-T-0460

Solicitation SPE7L0-26-T-0460 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for one identification plate, identified by NSN 2590-01-686-7705. The procurement is categorized under NAICS 333310 and requires delivery to the Letterkenny Army Depot in Chambersburg, Pennsylvania, with a required delivery date of September 16, 2026. Shipping is specified as FOB Origin via the fastest traceable means, and the government will perform both inspection and acceptance at the destination. The contract imposes strict technical and quality requirements, including compliance with the DLA Master List, MIL-STD-129 for marking, and ASTM D3951 for packaging. Specific prohibitions include the use of Class I ozone-depleting chemicals and the use of additive manufacturing processes for the produced items. Technical data is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Offerors must comply with the Buy American Act and Berry Amendment, providing full disclosure for any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DIBBS portal for quote submission by September 28, 2026. While not a small business set-aside, a price evaluation preference is available for certified HUBZone Small Business Concerns. The primary point of contact for this acquisition is Jeffrey Bloom.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L0-26-T-0458

Solicitation SPE7L0-26-T-0458 is a Request for Quotations issued by the DLA Land and Maritime Land Supply Chain ESOC Buys for the procurement of seven piston pins, identified by NSN 2815-01-595-9382 and Cummins Inc part number 4982186. The requirement falls under NAICS code 333618. The original required delivery date is September 14, 2026, with a delivery window of five days after receipt of order. Items are to be shipped via the fastest traceable means, excluding parcel post, to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Additionally, the use of class I ozone depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons. Quotes must be submitted through the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Other Engine Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

ASTM D3951 Compliant Packaging and ShippingThis subcontract for the Department of Defense, specifically under the Land Supply Chain ESOC Buys agency, involves providing specialized packaging and packing services for non-hazardous materials used by prime contractors on Defense Logistics Agency supply contracts. The service provider is responsible for ensuring all materials are packed according to ASTM D3951 standards to prevent transit damage and must adhere to FED-STD-313 for hazardous material determination. The final deliverable consists of properly packaged and labeled shipments ready for transit to DLA depots. The contract is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 25, 2026, following the posting date of September 14, 2026. This opportunity is focused on maintaining strict compliance with federal packaging and shipping standards to ensure the integrity of materials delivered to government facilities.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturer of NSN 0161-25-318This subcontract opportunity with the Department of Defense, specifically the Land Supply Chain ESOC Buys, involves the manufacture of motor vehicle parts under NSN 0161-25-318. The selected provider will fabricate parts for prime contractors on Defense Logistics Agency supply contracts, utilizing either traditional or additive manufacturing methods. All production must adhere to the DLA Master List of Technical and Quality Requirements and meet specific R or I number standards. To be eligible, manufacturers must maintain a recognized quality management system, such as ISO 9001 or AS9100. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336390. Interested parties must submit their responses by the deadline of September 25, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

DLA Compliant Packaging and CratingThis subcontract for the Department of Defense, specifically the Land Supply Chain ESOC Buys, involves the specialized packaging and preservation of 11 Hub Bodies to support prime contractors. The work must be performed in Texarkana, Texas, and strictly adhere to RP001 DLA Packaging Requirements for Procurement. This includes the use of military-grade crates and vapor barriers to ensure effective corrosion prevention, as well as the application of all mandatory military markings and labels. The opportunity is categorized under NAICS code 488510 and was posted on September 14, 2026, with a response deadline of September 25, 2026. The primary objective is the delivery of the 11 Hub Bodies fully packaged and crated for shipment in compliance with DLA standards.

Freight Transportation Arrangement

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS