Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hardware Inspection and Quality Validation

Active

Federal

Response Deadline11/06/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Hardware Inspection and Quality Validation subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves providing independent inspection and quality assurance testing for prime contractors. The selected provider will perform technical acceptability testing for detector accuracy using specialized calibration tools and testing rigs. Key deliverables include the submission of detailed inspection reports and formal certifications of technical acceptability. To qualify, contractors must hold recognized quality certifications such as ISO 9001 or AS9100 and are required to maintain all inspection records for 365 calendar days following delivery. This opportunity falls under NAICS code 541380, with a response deadline set for November 6, 2026.

General Info

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QGC62.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROJECTOR-DETECTOR,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 08:30:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and quality assurance testing for prime contractors delivering DLA supply contracts. Conducts technical acceptability testing using calibration tools and testing rigs for detector accuracy. Maintains inspection records for 365 calendar days post-delivery. Requires quality certifications such as ISO 9001 or AS9100. Delivers inspection reports and certification of technical acceptability.

Similar Contracts

Same NAICS industry code

First Article Testing and Inspection (NDT)This subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves performing non-destructive First Article Testing and inspection for prime contractors. The scope of work requires conducting NDT on a single sample unit utilizing methods such as X-ray, ultrasonic, dye penetrant, or magnetic particle inspection. The selected provider must develop and submit test procedures in accordance with the Contract Data Requirements List. To qualify, personnel must hold ASNT Level II or III certification. The final deliverables for this engagement include the approved test procedures and a comprehensive First Article Test/Inspection report. The solicitation was posted on October 19, 2026, with a response deadline of November 16, 2026, under NAICS code 541380.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

Third-Party Inspection and Certification

POSTED

about 5 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is soliciting quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project may require the removal and disposal of approximately 2,000 square feet in the warehouse, 1,600 square feet in the storage area, and 600 square feet in the gymnasium. All work must be performed by contractors possessing all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. To be considered for the best-value award, offerors must submit a completed bid sheet, supplier packet including a W-9 and self-certification form, proof of insurance, and three professional references by October 21, 2026. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Revision 31, and includes various FAR clauses regarding equal opportunity, small business utilization, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis to MTC.

Joliet Job Corps

POSTED

about 11 hours ago

DEADLINE

Asbestos Surveying, Air Monitoring, and Laboratory AnalysisThis subcontract agreement establishes a partnership with Home Group to provide specialized asbestos identification and monitoring services across various domestic and commercial housing projects. The scope of work includes conducting management, refurbishment, demolition, and re-inspection surveys to locate asbestos-containing materials, as well as performing air monitoring and laboratory analysis through accredited facilities. All activities must be executed in strict compliance with HSG264 standards to ensure safety and regulatory adherence. The service provider is responsible for delivering comprehensive survey reports, official air monitoring certificates, and detailed laboratory analysis results to the prime contractors.

POSTED

about 20 hours ago

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will perform critical quality assurance services for prime contractors on DLA supply contracts, specifically conducting dimensional inspections via CMM metrology and material verification within testing laboratories. Additional responsibilities include the verification of manufacturing process sheets and the provision of quality assurance surveillance for sub-venders. To ensure compliance with aerospace industry requirements, the contractor must adhere to AS9100 or equivalent quality standards. The primary deliverables for this engagement are the First Article Testing Report and a comprehensive Quality Certification package. Performance for this contract is centered at Tinker AFB, and the response deadline for the solicitation is October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors under the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves performing First Article Testing to validate initial production units, ensuring they meet strict dimensional requirements of 0.170 thickness, 0.380 height, and 0.435 width. Additionally, the contractor must verify material integrity to ensure no splicing or gluing has occurred, utilizing precision measurement tools and material analysis equipment to confirm compliance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The primary deliverables include a comprehensive First Article Test report and a formal certification confirming that all units adhere to the Statement of Work. Interested parties should note the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

Quality Inspection and Sampling Services for Critical Aerospace ComponentsThis subcontract for Quality Inspection and Sampling Services for Critical Aerospace Components supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for performing zero-based sampling and quality inspections for prime contractors on aerospace procurements, specifically focusing on turbine engine components. The scope of work includes executing sampling plans according to MIL-STD-1916 or ASQ H1331 to ensure part authenticity and strict compliance with Boeing specifications for critical application items. The service provider will utilize precision measurement tools to verify components and is required to deliver detailed inspection reports and sampling certifications. Performance for this contract takes place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing specialized first article testing and validation for electrical assemblies on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work focuses on executing validation tests for NSN 5995-01-676-1147 in accordance with RT001 standards and specific technical data. The selected provider must coordinate closely with Government Quality Assurance Representatives for in-process verification and is required to deliver a formal written First Article Test Report upon completion. To be eligible, contractors must hold JCP certification for handling ITAR and EAR data and maintain certification in either SAE AS9003 or ISO 9001. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

First Article Test (FAT) EvaluationThis subcontract, issued by the Department of Defense via Depot Hill, requires the performance of First Article Testing for a solenoid valve with NSN 4810-01-044-9244. The selected contractor will utilize laboratory equipment to verify the performance and tolerances of the first production unit, ensuring it meets all necessary specifications. This process involves close coordination with the Engineering Support Activity for final approval and culminates in the delivery of a validated sample unit and a comprehensive FAT report. The project is based at Hill AFB and falls under NAICS code 541380. Due to the handling of Controlled Unclassified Information, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 29, 2026.

POSTED

about 24 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform quality conformance validation for prime contractors on Defense Logistics Agency supply contracts, specifically focusing on the execution of Production Lot Tests. This work involves using electrical testing equipment, such as signal analyzers and multimeters, to verify NSN part number accuracy, signal integrity, and serial cable continuity in accordance with established DLA quality assurance standards. The scope of work culminates in the delivery of a formal certification of quality conformance or a detailed test report. Performance for this contract is located in Tracy, California, under NAICS code 541380. Interested parties must note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Electrical Component Testing and Certification ServicesThis subcontract for Electrical Component Testing and Certification Services involves performing First Article Testing for prime contractors supporting DLA supply contracts for NSN 016761127. The scope of work requires the testing of two initial production units using signal generators, continuity testers, and multimeters to ensure full performance verification against Engineering Support Activity standards. All technical data handling must strictly comply with DFARS 252.204-7012 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The selected provider is required to deliver a formal First Article Test Report within 30 calendar days of testing. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Safety Relief Valve Manufacturer/SupplierThis subcontract involves the manufacture and supply of six safety relief valves, identified by NIIN 010166065, for prime contractors supporting DLA supply contracts. The supplier is responsible for ensuring all units meet the specific material and physical requirements outlined in drawing 2888350 under Cage 10001. To maintain compliance with approved source CAGE codes, the provider must utilize precision machining and assembly equipment and submit all necessary authorized dealer or distributor documentation. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, the opportunity falls under NAICS code 332911. The solicitation was posted on October 19, 2026, with a response deadline set for November 16, 2026.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

Power Supply Manufacturer (NSN 6130-01-241-2059 GL)This subcontract opportunity, managed by the Department of Defense through DLA Mechanicsburg, seeks a manufacturer to produce and supply Power Supply units under NSN 6130-01-241-2059 GL for prime contractors on Navy projects. The selected provider is responsible for developing or acquiring Stable Base Master Phototools for manufacturing and must ensure all deliverables strictly adhere to MIL-STD-130 N and MIL-STD-1686 C standards. Key operational requirements include the implementation of CDAP standards and rigorous supply chain traceability. The contractor must apply DLR labels and SMIC on all containers and provide comprehensive traceability documentation alongside the physical power supply units. Interested parties must submit their responses by November 16, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply and Distribution of Rotary Pump (NIIN 010621473)This subcontract involves the supply and distribution of rotary pumps, specifically NIIN 010621473, to support prime contractors on DLA supply contracts for the Department of Defense. The distributor is responsible for sourcing components directly from authorized original equipment manufacturers, providing all necessary OEM CAGE codes and part numbers to ensure authenticity. The scope of work includes managing all logistics and delivery processes while maintaining strict supply chain traceability through the tracking of batch, lot, and serial numbers. To mitigate risk, the provider must comply with the Counterfeit Detection And Avoidance Program and deliver both the physical hardware and the required OEM verification documentation.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Manufacture of Rotary Pump (NIIN 010621473)This subcontract involves the manufacture of rotary pumps for prime contractors under DLA supply contracts, specifically for NIIN 010621473. The selected provider must fabricate and assemble the pumps in strict accordance with TDP Version 006 and Military/Federal Specifications accessed via DODISS. Production requires the use of precision machining and assembly equipment, with all materials adhering to FAR 52.223-4 standards and the Counterfeit Detection And Avoidance Program. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 333911, the contract requires the delivery of the physical pumps along with comprehensive inspection records and traceability documentation. The solicitation was posted on October 19, 2026, with a response deadline of November 16, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Preservation, Packaging, and Marking for Maritime HardwareThis subcontract involves providing preservation, packaging, and marking services for maritime hardware in support of prime contractors on DLA Weapons Support and NAVSUP WSS projects. The scope of work requires the application of Depot Level Repairable labels and Special Material Identification Code markings, with a specific requirement for red Level 1 markings for SMIC L1 items. All activities must strictly adhere to WSSTERMDZ03 preservation and packing standards. The contractor is responsible for delivering the finalized preserved, packed, and marked shipping containers to N60530. This effort is managed under the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, falling under NAICS code 339943.

Marking Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Manufacture of BRIDGE RLS, BENCHTOThis subcontract involves the manufacture of BRIDGE RLS, BENCHTO hardware for prime contractors supporting DLA Weapons Support and NAVSUP WSS projects. The work is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 334515. The contractor is responsible for producing finished units with NIIN 017362629, ensuring strict adherence to design reference E49808L-052 and Cage Code 7ZXR5. The scope of work requires maintaining the total equipment baseline configuration across hardware, software, and firmware. Additionally, the manufacturer must utilize new production materials and comply with DLATERMHZ01 traceability requirements. The opportunity was posted on October 19, 2026, with a response deadline of December 1, 2026.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Supplier for Kit, Fuel PumpThis subcontract opportunity, issued by the Department of Defense through SPRMM1 DLA Mechanicsburg, seeks a supplier to provide Fuel Pump Kits for prime contractors involved in DLA fuel system procurement projects. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to technical specifications for NIIN 011000310 and CAGE 53711. To ensure quality and compliance, the supplier must be an authorized distributor of the original manufacturer and provide comprehensive supply chain traceability documentation. All items must be packaged according to MIL-STD-2073 standards and delivered as completed kits. This procurement falls under NAICS code 457210. Interested parties should note that the response deadline for this requirement is November 16, 2026.

POSTED

about 5 hours ago

DEADLINE

Supplier for Kit, Fuel Tank TurnaroundThis subcontract opportunity, issued by the Department of Defense through DLA Mechanicsburg, seeks a supplier to provide Fuel Tank Turnaround Kits for prime contractors involved in fuel system procurement projects. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to technical specifications for NIN O11000309 and CAGE 53711. To ensure quality and compliance, the supplier must be an authorized distributor of the original manufacturer and provide comprehensive supply chain traceability documentation. All materials must be packaged according to MIL-STD-2073 standards and delivered as completed turnaround kits. This procurement falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier for Parts Kit, Valve, TwoThis subcontract, issued by the Department of Defense through SPRMM1 DLA Mechanicsburg, requires the manufacture or sourcing of 23 valve kits for prime contractors working on DLA fuel system procurement projects. The supplied components must strictly adhere to the technical specifications for NIN 010684431 and CAGE 53711, with all items packaged according to MIL-STD-2073 standards. A critical requirement of the agreement is the provision of full supply chain traceability, including batch IDs and lot codes, to comply with the Counterfeit Detection And Avoidance Program. The opportunity was posted on October 19, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

MSDS/SDS Documentation ServicesThis subcontract for MSDS/SDS Documentation Services, issued by the Department of Defense under the SPRMM1 DLA Mechanicsburg agency, requires the provision of Material Safety Data Sheets for prime contractors delivering electronic components to the DLA. The selected provider is responsible for identifying all hazardous materials within the products and either procuring or creating safety data sheets that strictly adhere to OSHA and FED STD 313 requirements. The scope of work culminates in the delivery of completed MSDS documentation for every identified hazardous material. This opportunity falls under NAICS code 541620 and has a response deadline of December 1, 2026.

Environmental Consulting Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Military Preservation, Packaging, and MarkingThis subcontract, titled Military Preservation, Packaging, and Marking, involves providing specialized military-grade packaging, preservation, and marking services for prime contractors supporting NAVSUP WSS Maritime projects. The scope of work includes the application of Depot Level Repairable labels and Special Material Identification Code markings, with a specific requirement for RED LEVEL 1 markings on containers. All items must be packed and preserved in strict accordance with NAVSUP WSS Maritime standards to ensure the delivery of properly prepared shipping containers. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 488410, the opportunity was posted on October 19, 2026. Interested parties must submit their responses by the deadline of December 1, 2026.

Motor Vehicle Towing

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS