Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HARNESS, CARRYING LITTE

Active
SPE2DS-26-T-247NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a carrying litter harness, a two-piece set made of two-inch polypropylene with two shoulder pads and two clips, each unit sold individually. The item is regulated by the FDA as a Class I medical device under regulation 880.6900, requiring compliance with registration, listing, labeling, and GMP standards despite not needing a 510(k) premarket notification. All packaging and labeling must adhere to the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements, which take absolute precedence. The harness must be packaged in sealed unit containers and shipped in commercial exterior containers suitable for safe delivery by common carrier at the lowest rate. Mercury or mercury-containing compounds are prohibited except for specific exempted uses such as batteries, fluorescent lamps, or controlled instruments, which must include secondary containment. Each delivery is scheduled for FOB destination within 20 days of contract award, with zero variance allowed on quantity, and inspection and acceptance occur at the destination. The item is delivered in single-unit packs with a unit of issue as “EACH,” and palletization must follow DLA Packaging Requirements. Three separate delivery locations are specified — USS Essex LHD-2, USS Tripoli LHA-7, and USS Makin Island LHD-8 — each with unique freight and parcel post addresses. Shipment must occur via the fastest traceable means, and parcel post is explicitly prohibited. The contract references multiple DLA technical and quality requirements, and vendors must use the Vendor Service Manager system for shipping. All items are tied to the same NSN and part number, with a required delivery date of July 21, 2026, and a single unit price of $1.00 per unit.

General Info

Procure FDA Class I medical carrying litter harnesses, $1.00 each, delivered FOB destination by July 21, 2026, to three naval ships, no parcel post, strict packaging rules.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

UNIT 100150 BOX 1, FPO, AP, 96643, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-247N Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Lisa Thomas-Wright
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HARNESS,CARRYING LITTER
HARNESS, CARRYING LITTER<(>,<)>
ONE OF A SET OF TWO<(>,<)>
2 INCH POLYPROPYLENE, 2 SHOULDER PADS, 2 CLIPS<(>,<)>
EACH
U/I = EACH
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
REGULATION 880.6900 CLASS I EVEN THOUGH A 510(K) IS NOT REQUIRED, IT IS NECESSARY TO MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE: REGISTRATION AND LISTING, LABELING OR GMP'S.
SPE2DS-26-T-247N
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
LIFESAVING SYSTEMS LLC 64249 P/N 402-8
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017524038 0001 EA 1.000
NSN/MATERIAL:6530014723860
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
SPE2DS-26-T-247N
SECTION B
PR: 7017524038 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2153361900425
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017524068 0001 EA 1.000
NSN/MATERIAL:6530014723860
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE2DS-26-T-247N
SECTION B
PR: 7017524068 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N27501
USS TRIPOLI LHA 7
UNIT 100429 BOX 1
FPO AP 96694-2900
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N27501
USS TRIPOLI LHA 7
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2750161890163
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017524212 0001 EA 1.000
NSN/MATERIAL:6530014723860
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE2DS-26-T-247N
SECTION B
PR: 7017524212 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N23171
USS MAKIN ISLAND LHD 8
UNIT 100222 BOX 1
FPO AP 96672
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23171
USS MAKIN ISLAND
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2317161940214
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
SPE2DS-26-T-247N
SECTION B
PR: 7017524212 PRLI: 0001 CONT’D

SPE2DS-26-T-247N NSN/Part Number: 6530-01-472-3860 Quantity: 1 EA Purchase Request: 7017524068QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
Medical Device Distribution and Logistics ServicesThe contract encompasses the warehousing, order fulfillment, and FOB Destination shipping of medical devices to Belle Chasse, Louisiana, with strict adherence to Department of Defense Logistics Agency packaging standards and hazardous materials regulations. All operations must ensure the safe, compliant handling and transport of sensitive medical equipment, maintaining full regulatory alignment throughout the supply chain. The performance location is fixed at the specified zip code in Belle Chasse, and the services are structured as a subcontract under the NAICS code 423450, indicating a focus on wholesale trade of medical and surgical equipment. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF. The contract requires precise execution of logistics functions including inventory control, order accuracy, and final delivery under FOB Destination terms, placing responsibility for shipping costs and risk on the contractor until goods reach the designated location. Compliance with DLA packaging protocols and hazardous materials standards is non-negotiable, demanding certified processes, documentation, and trained personnel to manage regulated medical items securely and efficiently.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
COVER, STERILITY MAINTEThe contract solicitation SPE2DH-26-T-5295 seeks the supply of 16 x 22-inch polyethylene self-seal covers for sterility maintenance, with a unit of issue of 250 covers per package. Only one package is required, priced at $88.58, with delivery due within 20 days after order placement to FPO AE 09566-4008, designated for the USNS COMFORT T AH 20 medical facility. The item is classified under NSN 6530-01-278-9412 and falls under NAICS code 423450, with procurement conducted under simplified acquisition procedures using a firm fixed-price contract type. Compliance with DLA’s Packaging Requirements for Procurement (RP001) and Technical and Quality Requirements referenced in the DLA Master List is mandatory, and all packaging must adhere to MIL-STD-2073-1E, while marking must conform to Medical Marking Standard No. 1 (MMS NO. 1), superseding MIL-STD-129 for all medical items. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200, and contractors must submit sample labels for approval if using alternative regulatory standards. The contract incorporates multiple FAR and DFARS clauses related to small business representation, employment equity, trafficking in persons, cybersecurity, and government property, with Alternate I versions applied to several clauses including Type of Contract and Postaward Small Business Program Representation. Invoicing must be submitted electronically through Wide Area WorkFlow, and payment processing will be handled via the DoDAAC system. Offerors must hold a valid UEI and CAGE code, and are required to disclose information related to covered defense telecommunications equipment, if applicable. Delivery is FOB destination, with inspection and acceptance performed by the Government at the delivery point. The solicitation closed for responses on July 27, 2026, and was issued through the DLA BSM DIBBS portal, requiring all proposals to be submitted electronically via DIBBS, WAWF, EDI, or FTP. No evaluation factors or award criteria were disclosed, indicating an LPTA approach is likely.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLECThe contract specifies the procurement of 100 vacuum blood collection tubes, each 7 mL in capacity, with sodium fluoride (30 mg) as the anticoagulant, gray cap, and glass construction, manufactured under part numbers including B2951-94 and 367729 by approved suppliers such as Baxter Healthcare Corp and Cardinal Health. Each unit must be commercially packaged in sealed inner containers to prevent damage and shipped in exterior containers compliant with commercial standards, ensuring safe delivery at the lowest cost to the specified destination. The item has a mandatory 45-month shelf life, with no more than eight months allowed to have elapsed from manufacture to delivery. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, and include mandatory information such as the NSN, manufacturer name and CAGE code, manufacture and expiration dates, and contract/lot number. The product is regulated by the FDA, requiring referral via EBS for confirmation prior to award. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable freight, explicitly prohibiting parcel post, to Malstrom Air Force Base, Montana. All packaging and handling must comply with DLA’s packaging requirements and take precedence over ASTM D3951, with palletization following RP001. The item is classified under a Type I non-extendable shelf life code, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
CYLINDER, GRADUATED, LABThe contract calls for the procurement of one each of a 100 mL graduated laboratory glass cylinder, identified by NSN 6640-00-420-0000, to be delivered within 20 days after order placement to FPO AA 34092, designated as the USS NEW YORK LPD 21. Delivery is FOB destination, meaning the contractor assumes all transportation costs and risks until the item reaches the specified delivery point. The unit must be packaged commercially in sealed containers that prevent breakage and damage, with outer shipping containers suitable for safe common carrier transport at the lowest possible rate. Packaging and marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for all medical acquisitions, and must include the unit of issue and quantity per pack. Hazardous materials are governed by additional standards including FED-STD-313 and TQ requirement IP025, and all labeling must comply with OSHA’s Hazard Communication Standard. The item must be calibrated to deliver with dimensions of 29 mm wide by 255 mm high, featuring a single scale and pour-out mouth. Bidders must provide their source and part number, and all submissions must be made electronically via the DLA Internet Bid Board System by the July 27, 2026 deadline. The solicitation incorporates numerous FAR and DFARS clauses covering equal opportunity, human trafficking, employment verification, sustainable products, hazardous materials, cybersecurity safeguards, subcontracting, inspection, default, payment, and safeguarding of defense information. The contract requires adherence to DLA’s Master List of Technical and Quality Requirements, which takes precedence over commercial standards like ASTM D3951. Invoicing must be submitted through WAWF, and financial and payment details will be determined upon award, including the required DoDAAC codes. The contract does not specify unit pricing or total value, but historical data suggests an estimated value of $769.11. Offerors must be registered with a Unique Entity ID and must represent their small business status and socioeconomic certifications, including WOSB, EDWOSB, SDVOSB, HUBZone, or SDB, if applicable. Joint ventures must disclose each partner’s UEI and CAGE code. Contractors are subject to cybersecurity obligations under NIST SP 800-171 and DFARS 252.204-70
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
END PLUG, VISCOMETERThe contract is for a single unit of an end plug designed for use with a viscometer, specifically designated for the Oil Test Centre and identified by NSN 6630-01-498-9904. The item, labeled as OTC Version F, is to be delivered within 20 days after award and is part of purchase request 7017524210. Technical and quality standards applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, with the relevant revisions determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have all government identification removed prior to return. The solicitation, numbered SPE2DH-26-T-5288, was posted on July 19, 2026, with responses due by July 27, 2026. It falls under NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH, with the point of contact being Tina Vu at DLA. The place of performance is designated as FPO with ZIP code 96694, and no set-aside type is specified. The procurement is conducted through the DIBBS platform for federal acquisition.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
SLED
Supply of Replacement Parts and ConsumablesThe contract requires the supply of FDA-compliant replacement parts, filters, hoses, and consumables essential for biomedical maintenance and repair activities, ensuring all items are current-production grade and meet regulatory standards. All provided materials must be suitable for use in healthcare environments and aligned with the operational needs of biomedical equipment servicing. The solicitation is structured as a subcontract under NAICS code 423450 and is issued by the Texas office of the Department of State Health Services, with a response deadline of August 7, 2026, at 4:30 PM. The place of performance and detailed delivery specifications are not specified, but the requirement implies distribution throughout Texas-based healthcare facilities. Interested parties must submit responses by the stated deadline through the designated portal on txsmartbuy.gov.
Department of State Health Services

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 423450
New
SLED
IWQ 134647 Powered Air Purifying Respirator (PAPR) Kits & CartridgesGwinnett County Government in Georgia is seeking proposals for Powered Air Purifying Respirator (PAPR) kits and cartridges through solicitation number PE-77023-NONST-2027-000000673, which was posted on July 17, 2026, with a response deadline of July 24, 2026. The procurement is categorized under state, local, or educational (SLED) government procurement and does not designate a specific set-aside or NAICS code, indicating it is open to general contractors without restrictions based on business size or demographic classification. The equipment required includes complete PAPR systems and associated replacement cartridges designed for air purification, intended for use by personnel within the county's operational environment. Performance of the contract is expected to be located within the state of Georgia, with no specific city or zip code outlined in the details. Primary point of contact for inquiries is Jenny Coleman, reachable via email at brandi.cantie@gwinnettcounty.com or phone at 770-822-8734, and additional information can be found through the provided online portal link.
Gwinnett County Government

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 423450
New
DIBBS
Supply of Industrial Face Shield (NSN 4240015583253)The contract entails the procurement and delivery of a single industrial face shield identified by NATO Stock Number 4240015583253 and part number 21AGR12AF-C+500, designated for use aboard the USS LABOON (DDG 58). Delivery must be made via traceable shipping methods to ensure full accountability and compliance with all Department of Defense requirements, with terms set at FOB destination, meaning the supplier retains responsibility for the item until it reaches the specified endpoint. The order must adhere to both DPAS prioritization standards and DLA-mandated packaging guidelines to ensure compatibility with Defense Logistics Agency logistics systems and handling protocols. The contract is structured as a subcontract under the NAICS code 423450, with the Defense Logistics Agency acting as the overseeing agency within the Department of Defense, and the performance location is tied directly to the naval vessel’s operational requirements.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
Supply of Antifreeze Test Kits (NSN: 6850010115039)The contract entails the procurement and delivery of five units of antifreeze test kits, identified by NSN 6850010115039, to a military installation in Gulfport, Mississippi. Delivery must be completed by August 6, 2026, with all units requiring compliant packaging and traceable shipping procedures to ensure accountability and regulatory adherence throughout the supply chain. The transaction is classified as a subcontract under the NAICS code 423450, and the procuring entity is the Defense Logistics Agency on behalf of the Department of Defense. All logistical and compliance obligations are tied to the specific requirements of the military site, with no flexibility in delivery date or item specification. The contract was posted on July 17, 2026, and is administered through the DLA’s procurement system, with the associated award and delivery details accessible via the provided DIBBS link.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
Commercial Air-Filtering Respirator Filter SupplyThe contract entails the procurement and delivery of one box of air-filtering respirator filters identified by NSN 4240014557360 to Edwards Air Force Base in California. The shipment must adhere to FOB destination terms, meaning the vendor assumes full responsibility for the goods until they are received at the designated location, including any risks or damages during transit. Traceable shipping is required to ensure full visibility and accountability throughout the delivery process. This is a subcontract under the North American Industry Classification System code 423450, categorized as part of the Defense Logistics Agency’s broader procurement activities under the Department of Defense. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal for award documentation and tracking purposes.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
Dental Medical Equipment Supply & DistributionThe contract encompasses the supply and delivery of dental syringes listed under the National Stock Number system, with all deliveries subject to FOB Destination CONUS terms, meaning ownership and risk transfer to the buyer upon arrival at a designated point within the continental United States. The products must adhere to stringent cybersecurity requirements and sourcing restrictions to ensure compliance with federal regulations regarding the origin of materials and the security of integrated components, reflecting the Department of Defense’s emphasis on trustworthy domestic and allied supply chains. The award is structured as a subcontract under the Defense Logistics Agency, operating under NAICS code 423450 for medical and dental equipment merchant wholesalers, and is intended to support military medical readiness through reliable, secure, and standardized equipment provisioning.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
TUBE, SAYBOLT VISCOSThe contract specifies the procurement of four units of a Tube, Saybolt Viscosimeter, composed of a brass tube and stainless steel components including a universal orifice and wrench, with each unit to be supplied as a complete assembly. Bidders must clearly identify the source and part number being offered for delivery, ensuring compliance with all technical specifications. All items must be packaged in sealed commercial containers that safeguard against damage or breakage, with exterior shipping containers suitable for safe transport via common carrier at the lowest possible rate to the designated delivery point in Suffolk, Virginia. Packaging and marking must adhere strictly to Medical Marking Standard No. 1, which replaces all prior references to MIL-STD-129, and bidders are directed to obtain the current standard from DLA Troop Support. The acquisition falls under the NAICS code 423450, is managed by the Department of Defense’s Medical Supply Chain FSH, and is subject to covered defense information requirements. The solicitation, issued under number SPE2DH-26-T-4253, requires responses by July 22, 2026, with a delivery deadline of five days after order placement.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 541611
New
DIBBS
Regulatory Compliance and Quality Assurance SupportThe contract establishes a subcontract for comprehensive regulatory compliance and quality assurance support focused on medical supply chain operations under the Department of Defense. It requires third-party services to manage regulatory submissions, prepare accurate Safety Data Sheets, and ensure adherence to federal mandates including FDA guidelines for product safety, OSHA standards for chemical handling, DFARS provisions for defense-related procurement, and the Buy American Act and Berry Amendment to guarantee domestic sourcing of materials and components. All work must be performed at the designated performance location in APO with zip code 09227-0000, and the solicitation is open for responses between July 19 and July 27, 2026, under NAICS code 541611 for administrative management and general management consulting services. The contract is not subject to any specific set-aside designation and is part of a broader effort to maintain stringent compliance across the medical supply chain supporting military operations.
Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493110
New
DIBBS
Domestic Medical Supply Distribution and LogisticsThe contract entails the domestic warehousing, order fulfillment, and international shipping of medical supplies to the military postal address APO AE 09227-0000, ensuring timely and secure delivery to U.S. military personnel abroad. All logistics operations must comply with WAWF-compliant invoicing standards and include full shipment tracking to guarantee transparency and accountability from point of origin to final destination. The work falls under NAICS code 493110, indicating a focus on warehousing and storage services, and is structured as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and performance is centered on fulfilling supply chain needs for deployed forces through efficient and reliable distribution networks.
General Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 323113
New
DIBBS
Medical Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and barcoding services for neonatal masks in full compliance with U.S. military standards, including hazard communication protocols, MIL-STD-129 for labeling and packaging of military shipments, and MMS No. 1 specifications for medical materiel management. All materials must be accurately labeled with required markings, barcodes, and hazard information to ensure proper identification, handling, and traceability throughout the defense supply chain. The work must be performed to meet exacting federal specifications for quality, durability, and consistency in a high-stakes medical environment. This is a subcontract opportunity issued under the Department of Defense through the Medical Supply Chain MD Surg FSF, with a place of performance designated as APO 09227-0000. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, with the NAICS code 323113 indicating specialized medical device manufacturing and packaging services. Potential vendors must demonstrate capability to execute large-scale, highly regulated packaging operations under strict military directives, ensuring seamless integration into existing defense logistics pipelines for critical neonatal care equipment.
Commercial Screen Printing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
Neonatal Oronasal Mask Manufacturing and SupplyThe contract involves the manufacturing and supply of disposable neonatal oronasal masks specifically designed for military medical applications, featuring an air-cushioned structure to ensure patient comfort and secure fit, constructed from clear PVC material for enhanced visibility and monitoring during use. Each mask includes a standardized 15 mm connector compatible with standard neonatal respiratory equipment and is intended for single-use only to maintain sterility and reduce infection risks. Products must be packaged in units of 20 per container to facilitate efficient inventory management and field distribution. The work is classified under NAICS code 325620, indicating medical device manufacturing, and falls under a subcontract arrangement within the Department of Defense’s Medical Supply Chain structure. Performance is required at the APO military postal address, 09227-0000, aligning with the logistical needs of deployed or overseas medical units. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, indicating a tight seven-day submission window for qualified suppliers. This contract supports critical pediatric respiratory care in military medical settings, emphasizing reliability, compliance with sterile single-use standards, and seamless integration into existing field medical systems. The requirement underscores the need for high-quality, durable yet lightweight materials that meet operational demands under austere conditions, while ensuring consistent performance across diverse environments.
Toilet Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Defense ContractorsThis contract requires the implementation and assessment of cybersecurity controls aligned with NIST SP 800-171 and DFARS 252.204-7012 to safeguard covered defense information handled by the contractor. The work is focused on ensuring compliance with federal requirements designed to protect sensitive unclassified information within the defense supply chain, particularly for subcontractors supporting Department of Defense operations. The contractor must establish, document, and validate security controls covering access management, audit logging, incident response, system integrity, and data protection in alignment with these standards. The contract is classified as a subcontract under NAICS code 541512, indicating it pertains to computer systems design services, and performance is expected at Keesler AFB, Mississippi, with a zip code of 39534-2519. The opportunity was posted on July 19, 2026, and responses are due by July 27, 2026. The contracting activity falls under the Medical Supply Chain MD Surg FSF, a component of the Department of Defense, and the work is intended to support the department’s broader objective of enforcing cybersecurity resilience across its vendor network. Compliance with the specified regulations is mandatory, and failure to meet the requirements could impact contract award or ongoing performance.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Medical Supply LogisticsThe contract encompasses the transportation of medical wipes to two distinct locations: Keesler AFB in Mississippi, United States, and Vilseck, Germany, under FOB Destination terms, meaning the seller is responsible for all costs and risks until the goods arrive at the designated delivery points. This includes arranging and covering the expenses for international customs clearance for shipments bound for Germany, ensuring compliance with all export and import regulations. The logistics operation must seamlessly handle both domestic and international freight, requiring robust coordination across multiple jurisdictions, modes of transport, and regulatory frameworks. The North American Industry Classification System code 484220 identifies the scope as for-hire freight transportation, specifically for trucking services, indicating the use of ground transportation as the primary method for domestic delivery and likely ocean or air freight combined with ground haulage for the international leg. This subcontract opportunity, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, has a response deadline of July 27, 2026, following its posting on July 19, 2026. The sole place of performance specified is Keesler AFB, MS with a zip code of 39534-2519, suggesting that domestic deliveries are managed from this central point while international shipments originate from the same supplier location and are routed independently to the overseas destination. Participation requires a capable logistics provider with experience in military supply chains, proven expertise in customs documentation for defense-related medical goods, and the infrastructure to guarantee timely, secure, and compliant delivery to both U.S. and European military installations under stringent federal requirements.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541921
New
DIBBS
Defense Logistics Agency Compliant Marking and BarcodingThis contract requires the application of DLA-compliant labels and barcodes to military medical shipments in accordance with Medical Marking Standard No. 1 and MIL-STD-129, ensuring precise identification, tracking, and handling of critical medical supplies throughout the defense supply chain. The work must be executed to exact military specifications, with all labeling and barcoding procedures meeting stringent federal standards for accuracy, durability, and legibility under operational conditions. The contract is structured as a subcontract and is managed under the NAICS code 541921, indicating it involves administrative management and other support services related to defense logistics operations. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, and the performance location is fixed at Keesler AFB, Mississippi, with a zip code of 39534-2519. The contracting activity falls under the Department of Defense, specifically the Medical Supply Chain MD Surg FSF office, which oversees the procurement and distribution of surgical and medical materiel. While the point of contact details are not provided, the official solicitation can be accessed via the DIBBS portal using the provided link, and all participants must adhere strictly to the marking standards outlined to ensure compatibility with existing military logistics systems and to support seamless field deployment of medical assets.
Photography Studios, Portrait

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance and LabelingThe contract seeks regulatory compliance services for hazardous materials, focusing on the preparation of Safety Data Sheets and the implementation of Globally Harmonized System labeling in accordance with FAR 52.223-3 and OSHA standards. The work is required to ensure that all hazardous materials handled under the medical supply chain are properly documented and labeled to meet federal safety and compliance requirements. The performance location is designated as Keesler AFB, with a zip code of 39534-2519, indicating the operational focus within this military installation. Services must adhere strictly to established regulatory frameworks to support the safe storage, transport, and use of hazardous substances across defense medical operations. This is a subcontract opportunity under NAICS code 541690, classified as a non-set aside procurement, with a posting date of July 19, 2026, and a response deadline of July 27, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, emphasizing the critical nature of compliance within the military healthcare logistics network. All proposers must demonstrate expertise in hazardous materials documentation and labeling compliance to qualify, with no set-aside provisions specified, leaving the award open to capable entities regardless of size or status. The solicitation can be accessed via the DIBBS platform using the provided link for detailed submission requirements and technical expectations.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326199
New
DIBBS
Medical-Grade Packaging and SterilizationThe contract mandates the sterile packaging of medical wipes in tamper-evident, vacuum-sealed containers that meet the stringent requirements of MIL-STD-2073-1E and MMS No. 1, ensuring compliance with Department of Defense standards for preservation and packaging of military medical supplies. The work must be performed to guarantee sterility, integrity, and long-term viability of the wipes under demanding storage and deployment conditions, with all materials and processes adhering to validated sterile manufacturing protocols. The solicitation is a subcontract under the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Keesler AFB, Mississippi, 39534-2519. Interested vendors must submit responses by the deadline of July 27, 2026, and the NAICS code 326199 indicates classification under Other Plastics Product Manufacturing, aligning with specialized medical packaging production. The contract is not set aside for any specific small business category, and all bidders must demonstrate proven capability in producing sterile, military-compliant packaging systems with full traceability and quality assurance documentation.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
Medical Wipe Manufacturing and FormulationThe contract calls for the manufacturing and formulation of pre-moistened wipes designed specifically for use with medical electrodes, with strict requirements for conductivity enhancement to ensure optimal signal transmission during clinical procedures. All products must meet FDA compliance standards and be certified biocompatible to ensure patient safety, adhering to rigorous quality and sterility controls throughout production. The wipes are intended for use in surgical and diagnostic environments where consistent electrical performance and skin compatibility are critical, requiring precise ingredient selection and controlled manufacturing processes to maintain functional and regulatory integrity. This is a subcontract under the Department of Defense’s Medical Supply Chain initiative, with the place of performance designated at Keesler AFB, Mississippi, 39534-2519. The opportunity is posted under NAICS code 325620, which classifies it within pharmaceutical and medicinal product manufacturing. The solicitation was issued on July 19, 2026, with responses due by July 27, 2026, and is accessible via the DIBBS portal. While no set-aside provisions are specified, bidders must demonstrate capacity to meet the technical, regulatory, and logistical demands of supplying a defense medical supply chain, including adherence to defense-specific quality assurance protocols and timely delivery timelines.
Toilet Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to Fort Stewart, GAThe contract requires timely ground transportation and final delivery of flammable medical supplies to Fort Stewart, Georgia, with full performance completed within 20 days of order placement under FOB Destination terms, meaning the seller bears all risks and costs until the goods reach the designated delivery point. The solicitation is categorized as a subcontract under NAICS code 484220 for heavy and tractor-trailer truck transportation, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. The response deadline is July 27, 2026, with the opportunity posted on July 19, 2026, providing a limited eight-day window for potential vendors to submit proposals. Delivery must be made to the specified zip code 31314-5185 at Fort Stewart, and all logistical operations must comply with safety and regulatory standards for transporting hazardous materials.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, hazard warning labels, and proper marking for flammable medical products in accordance with military and federal regulatory standards. All work must adhere strictly to safety and transportation requirements to ensure the secure handling and shipment of hazardous materials within the defense supply chain. Performance will be conducted at Fort Stewart, Georgia, with a firm deadline for submission set for July 27, 2026, and the opportunity posted on July 19, 2026, as a subcontract under the NAICS code 561910 for other support services. The contracting entity is the Department of Defense through the Medical Supply Chain MD Surg FSF, indicating this effort supports critical military medical logistics operations requiring precise compliance with hazardous materials regulations.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details