Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazard Communication Compliance (If Applicable)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with hazard communication standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 for any electrical contacts containing hazardous materials, mandating the provision of safety data sheets and appropriate hazard warning labels. The obligation applies only when hazardous substances are present in the components being supplied, and the responsibility falls on the subcontractor to ensure accurate documentation and labeling in accordance with federal regulations. This requirement is tied to the NAICS code 541690, indicating the work involves other scientific and technical consulting services, and is issued under the Defense Logistics Agency as part of the Department of Defense procurement system. The contract was posted in July 2026 and is structured as a subcontract, with no specific place of performance or point of contact indicated in the data provided.

General Info

Subcontractor must provide SDS and hazard labels for electrical components with hazardous materials under OSHA and DFARS.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-089K.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTACT, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide SDS and hazard warning labels per OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 if electrical contacts contain hazardous materials.

Similar Contracts

Same NAICS industry code

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District is soliciting proposals for the Corydon Well Replacement Project to design a new municipal groundwater production well and abandon the existing Corydon well in Wildomar, California. The project is divided into two phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling and abandonment process; Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping, testing, and commissioning the new well. This effort is funded through District funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, requiring adherence to federal grant reporting, the Build America Act, and Buy America preferences. TKE Engineering, Inc. is seeking qualified firms, specifically DBE, MBE, and WBE certified entities, providing services in hydrology, structural and electrical engineering, geotechnical investigation, and utility potholing. The total estimated project cost is 2,260,788 dollars, though the final contract will be a negotiated not-to-exceed limit based on a cost-reimbursable model. Proposals are due by 10:00 a.m. on September 1, 2026, via the PlanetBids Vendor Portal. Selection is based on demonstrated competence and professional qualifications, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope and schedule (20%). Awardees must comply with rigorous federal and state requirements, including SAM registration, non-collusion declarations, and specific insurance coverage limits.

TKE Engineering, Inc.

POSTED

about 7 hours ago

DEADLINE

Safety Compliance and OSHA Training ProviderThe County of Kauai in Hawaii is seeking a subcontractor to provide comprehensive safety compliance and OSHA training services. The selected provider will be responsible for developing OSHA-compliant safety programs, delivering necessary training, and conducting on-site compliance monitoring to ensure workplace safety standards are met. This opportunity falls under NAICS code 541690 and was posted on August 13, 2026. Interested parties must submit their responses by the deadline of September 30, 2026. Further details and application instructions can be accessed through the Public Purchase portal.

County of Kauai

POSTED

about 7 hours ago

DEADLINE

in about 2 months

National Lab Certification Testing Services

Solicitation # NLCPRFI2026MarketResearch

The Department of Health and Human Services, through the Substance Abuse and Mental Health Services Administration, is seeking information from qualified sources to support the National Laboratory Certification Program. This mission-critical program ensures the scientific reliability and legal supportability of drug testing results for federal agencies and industries regulated by the Department of Transportation and the Nuclear Regulatory Commission. The government is specifically looking for capabilities in technical and scientific support, forensic toxicology, laboratory inspections, performance testing, and administrative and cost recovery services. This request is a sources-sought notice under NAICS code 541690 to assist in acquisition planning and does not constitute a formal solicitation or an obligation to award a contract. Interested parties must submit their capabilities by August 24, 2026. The primary objective is to identify qualified organizations, including small businesses, that can maintain the continuity of program operations and ensure the integrity of federal workplace drug testing.

Hrsa Headquarters

POSTED

about 11 hours ago

DEADLINE

Pipeline Testing and Inspection

Iroquois Job Corps Center

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Equipment Commissioning and Training

POSTED

DEADLINE

Recycled Content Certification for Materials

California Department of Fish & Wildlife

POSTED

DEADLINE

2028 Hazard Mitigation Plan Consultant

Solicitation # PE-77129-NONST-2027-000000071

Hall County, Georgia, through its Emergency Management and Homeland Security Agency, is seeking qualified contractors to provide professional consulting services for the development of the 2028 Hazard Mitigation Plan. This solicitation, identified by number PE-77129-NONST-2027-000000071, is issued by the Hall County Board of Commissioners to ensure the county has a comprehensive strategy for disaster risk reduction. The opportunity was posted on August 12, 2026, with a response deadline set for September 3, 2026. Interested parties should direct inquiries to the primary point of contact, Mike Hawkins. The project will be performed within the state of Georgia to support the county's emergency management infrastructure.

Hall County Board of Commissioners

POSTED

DEADLINE

Hazardous Material Compliance and SDS Preparation

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Assurance and Inspection Services for Electronic Components

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Regulatory Compliance & Hazardous Materials DocumentationThis subcontract, titled Regulatory Compliance and Hazardous Materials Documentation, is issued by the Department of Defense for the DDSP New Cumberland Facility. The primary objective is to ensure all hazardous components within the valve meet specific safety and regulatory standards. The contractor is required to prepare and submit hazard warning labels and Material Safety Data Sheets or Safety Data Sheets in strict accordance with DFARS 252.223-7001 and NAVSEA 5100-003D. The project is categorized under NAICS code 541690 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 24, 2026, following the posting date of August 12, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling Services

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThis subcontract opportunity with the Department of Defense, specifically the DLA Fleet Readiness Center DLA PSC, focuses on hazardous materials compliance and labeling services. The primary objective is the preparation and submission of Safety Data Sheets and hazard warning labels to ensure full compliance with OSHA HAZCOM standards for any screws or packaging containing hazardous materials. The project is categorized under NAICS code 541690 and will be performed in Cherry Point. Interested parties must submit their responses by August 20, 2026, following the posting date of August 12, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE7MC-26-T-194Y

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one valve disk, identified by NSN 4820012554255 and part number DI405D1532BSC12-03 from OIC Valve Corp. The item is designated as a critical application item and must be delivered FOB destination to the USNS Guadalupe within 20 days. The original required delivery date is set for August 11, 2026. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards and MIL-STD-129 marking. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Shipping must be conducted via the fastest traceable means, and parcel post is explicitly prohibited.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E7-26-Q-0299

This contract, identified as SPE8E7-26-Q-0299, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of commercial off the shelf flashlights, specifically part number 14513 from Streamlight Inc. The order consists of nine line items totaling 41 units, with delivery required within 60 days after the order is received. Shipments are destined for various locations, including the USNS Wally Schirra, USNS Cesar Chavez, Sweihan Air Base, and Fort Wainwright, Alaska, as well as the Royal Jordanian Air Force in Jordan. The contract mandates strict adherence to DLA packaging and quality requirements, specifically referencing MIL-STD-129 for marking and labeling and RP001 for palletization. If the materials are deemed hazardous under FED-STD-313, they must be packaged according to requirement IP025; otherwise, commercial packaging per ASTM D3951 is required. Inspection and acceptance will take place at the destination, with the shipping terms set as FOB Origin.

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E8-26-T-5156

This contract, issued by the Defense Logistics Agency, is for the procurement of two signal horns, identified by NSN 6350-01-651-1624 and Fiamm Technologies Inc part number 7227421. The solicitation number is SPE8E8-26-T-5156, with a required delivery date of August 11, 2026, and a delivery timeline of 20 days after order. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the Commander Naval Air Force Pacific Fleet at Naval Air Station North Island in San Diego, California. Strict adherence to DLA packaging requirements is mandatory, specifically RP001 and MIL-STD-129, with packaging standards varying based on whether the material is classified as hazardous under FED-STD-313. The contract also incorporates several technical and quality requirements, including the removal of government identification from non-accepted supplies and specific documentation for source approval requests.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-5155

This solicitation issued by the Defense Logistics Agency under number SPE8E8-26-T-5155 is for the procurement of two air conditioning filter elements, identified by NSN 4130-00-106-9766. The required filters must have nominal dimensions of 25 inches in length, 14 inches in width, and 1 inch in thickness, with a face velocity of 360 FPM. Delivery is required within 20 days after order. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from any non-accepted supplies. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels and AQLs assigned to critical, major, and minor attributes. This is a fully competitive procurement based on military and federal specifications.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2216

This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for one power supply unit, part number GRSLPFC11-12476-1, manufactured by Technology Dynamics, Inc. The item is classified as a commercial restricted source item requiring government engineering source approval. It contains a sealed lead acid battery with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with shipping destined for the USS John S McCain. The contract specifies strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, and the shipment must be sent via the fastest traceable means as a high-priority NMCS delivery.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-195F

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of safety relief valves, specifically NSN 4820015275298, used in oil and water separators. The requirement is split across four contract line items totaling seven units, destined for the USS Paul Ignatius, USS William P Lawrence, USS Truxtun, and USS Ralph Johnson. Delivery is required within 20 days, with FOB destination and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and palletization requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components like batteries or sensors as specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4755

This solicitation from the Defense Logistics Agency is for the procurement of one storage battery, identified by NSN 6140-01-481-1199. The contract requires delivery within 20 days after receipt of order and falls under NAICS code 335910. The procurement is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires. Additionally, all packaging must adhere to RP001 DLA requirements.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-195C

This contract is a solicitation from the Defense Logistics Agency for the procurement of one copper alloy ball valve with a .25 inch size, 4 PSI set pressure, and male NPT end connections. The item is identified by NSN 4820-01-561-9487 and is associated with several approved part numbers from Adrick Marine Group and Mueller Refrigeration Products. The delivery is required within 20 days after receipt of order, with a final required delivery date of August 11, 2026, shipping FOB Origin to the USS Iwo Jima. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2218

This contract, solicitation number SPE7L7-26-Q-2218, is for the procurement of storage batteries (NSN 6140-01-203-4912) under a firm fixed price agreement. The total requirement is split across five line items, totaling 25 units, with delivery expected 60 days after the order is placed. The items are designated as critical application items and must adhere to specific technical data packages and standards, including SAE-J537-2016 and MIL-STD-129R. Key requirements include a Type I shelf life of 60 months and strict adherence to hazardous materials packaging, marking, and shipping regulations. Due to previous damage reports, the cushion thickness for packaging has been upgraded to 2 inches. Inspection and acceptance will occur at the point of origin, with shipments destined for locations including Osan Air Base in South Korea. The contract also mandates compliance with DLA packaging requirements and specific sampling methods according to MIL-STD-1916 or ASQ H1331.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2107

This contract is for the procurement of 120 feet of hot rolled, annealed steel composite 416 metal bar with a 5.000 inch diameter and lengths between 10 to 12 feet. The material must be supplied in whole foot lengths and adheres to ASTM A582/A582M and SAE AMS2806 standards. Delivery is required within 5 days of order to the USA Depot in Tobyhanna, Pennsylvania, with a quantity variance allowed of plus 10 percent and minus 0 percent. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for award eligibility. The supplier must provide a Certificate of Quality Compliance with every shipment and ensure continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are applied via stamping or stenciling. Packaging and marking must follow MIL-STD-129 and ASTM A700 requirements to avoid product rejection.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2108

This contract is for the procurement of 60 feet of extruded flat aluminum alloy bars, specifically alloy 5086 with H-111 temper. The material must be 0.500 inches thick, 2.000 inches wide, and supplied in whole foot lengths between 8 and 12 feet. Delivery is required within 5 days to a destination in Yokosuka, Japan, with a quantity variance allowed of plus 10 percent and minus 0 percent. Compliance with the Qualified Suppliers List for Distributors is mandatory for award eligibility. The supplier must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the contract delivery order number, NSN, and material specifications. Packaging and preservation must follow MIL-STD-129 and ASTM B660 standards, and the product must meet various technical specifications including SAE AMS-QQ-A-200/5B and ASTM B666.

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5159

This contract, identified as SPE8E8-26-T-5159, is a solicitation issued by the Defense Logistics Agency for the procurement of one electrical heating element, part number 657-005-V2.0, manufactured by Wolf Advanced Technology Canada Inc. The item is identified by NSN 4520-20-004-2192 and is to be delivered FOB Origin with a required delivery date of August 11, 2026, and a delivery window of 20 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements. The shipment is destined for the USS Kearsarge LHD 3 and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 6 hours ago

DEADLINE