Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Material Handling and Labeling

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires compliance with OSHA 29 CFR 1910.1200 for the proper labeling of hazardous materials through accurate label inserts and the provision of Material Safety Data Sheets whenever coatings or materials pose potential hazards. The work must be performed in accordance with federal safety standards to ensure safe handling, storage, and communication of chemical risks. The contract is classified as a subcontract under NAICS code 424690 and is issued by the ASC Commodities Division under the Department of Defense, with performance obligated at Hill Air Force Base, Utah, postal code 84056-5734. Offers must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, and all responses must align with the regulatory requirements for hazardous material documentation and labeling.

General Info

Comply with OSHA hazardous labeling and MSDS requirements for coatings at Hill AFB, Utah, by August 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

424690 - Other Chemical and Allied Products Merchant WholesalersView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Label inserts per OSHA 29 CFR 1910.1200 and provide MSDS if coatings or materials are hazardous.

Similar Contracts

Same NAICS industry code

Hazardous & Radioactive Materials Supply and PackagingThe contract pertains to the supply, packaging, labeling, and documentation of hazardous and radioactive materials in strict adherence to federal and military logistics and safety protocols. It requires full compliance with established standards to ensure safe handling, transportation, and accountability of sensitive materials throughout the supply chain. The work is to be performed at a designated location in San Diego with a zip code of 92136-3581, and the contractor must demonstrate expertise in managing regulated substances under rigorous federal oversight. This is a subcontract opportunity under NAICS code 424690, posted on August 9, 2026, with a mandatory response deadline of August 20, 2026. The contracting entity operates under the Department of Defense via the San Diego office, and the solicitation is managed through the DIBBS platform. Contractors must be prepared to meet stringent documentation requirements and possess the necessary certifications and infrastructure to handle materials that pose chemical, biological, or radiological risks, ensuring all activities align with Department of Defense and federal regulatory frameworks without exception.

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Handling and Packaging

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Packaging and Marking ServicesThe contract requires the provision of compliant packaging and marking services for logistics rail components, adhering strictly to ASTM D3951 or TQ IP025 standards for packaging integrity and protection during transit. All shipments must also be bar-coded in accordance with MIL-STD-129 to ensure proper identification, tracking, and handling throughout the defense logistics chain. Performance of the work is specifically designated for Robins AFB, Georgia, with the ZIP code 31098-1887 serving as the official place of performance. The solicitation is classified as a subcontract under NAICS code 424690, indicating it falls within the miscellaneous wholesale durable goods merchant category, likely targeting suppliers with specialized packaging and logistics capabilities. The opportunity was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, suggesting the components are critical to military operations requiring strict regulatory compliance and supply chain traceability.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Supply of Regulated Industrial Goods (Hazardous or Controlled Substances)The contract calls for the supply of industrial goods classified as hazardous under OSHA and Department of Defense standards, requiring strict adherence to regulatory compliance throughout the procurement and delivery process. All items must be identified by their NSN or SIN, accompanied by current Safety Data Sheets, and packaged in accordance with federal hazardous materials transportation and storage regulations to ensure safety and legal conformity. The work is to be performed with delivery targeted to Jacksonville, Florida, with the zip code 32212-0103 designated as the place of performance. This is a subcontract under the NAICS code 424690, which pertains to chemical and allied products merchant wholesalers, and the responsible agency is the Department of Defense under the Construction & Equipment Manu & Con organization. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. All bidders must ensure full compliance with DOD and OSHA requirements for hazardous substances, including documentation, labeling, and handling protocols, and must submit through the DIBBS portal using the provided solicitation reference. Failure to meet any regulatory or procedural obligation will result in disqualification.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging Materials Supply

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

Radioactive Materials Handling and NotificationThis contract pertains to the supply or handling of items containing radioactive materials that exceed established regulatory thresholds, mandating strict compliance with military standards for identification and notification. All materials must be marked in accordance with MIL-STD-129 to ensure proper tracking and safety protocols are maintained throughout the supply chain. Prior to delivery, the government must be formally notified, ensuring regulatory and security requirements are met before any items are transferred or accepted. The solicitation is structured as a subcontract under NAICS code 424690, which corresponds to other chemical and allied products merchant wholesalers, indicating the contractor will likely serve as a distributor or logistics provider for specialized radioactive components. The contract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of August 17, 2026, and a posting date of August 9, 2026, leaving a limited window for interested parties to submit proposals. The place of performance and point of contact details are not specified, suggesting logistics and delivery arrangements may be determined during contract execution.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Hazardous Materials with SDS ComplianceThe contract pertains to the supply of items containing hazardous materials, requiring strict adherence to all applicable OSHA and federal regulations regarding labeling and Safety Data Sheet (SDS) submission. All products must be fully compliant with hazardous material handling standards, ensuring accurate documentation and clear communication of chemical risks to end users. The contractor is obligated to provide complete and up-to-date SDS for every item delivered, aligning with federal safety mandates to protect workers and ensure regulatory compliance throughout the supply chain. This is a subcontract under NAICS code 424690, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with a response deadline of August 17, 2026. The solicitation was posted on August 9, 2026, and performance is anticipated to occur within the scope of the Department of Defense’s supply network, though specific location details are not provided. All submissions must meet technical and regulatory requirements outlined in the solicitation, and failure to comply with SDS or labeling obligations may result in rejection of the bid or contract penalties. The opportunity is accessible through the DIBBS system via the provided link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Reagent and Inhibitor SupplyThe contract pertains to the supply of commercially available NNMT inhibitors or associated biochemical reagents, requiring strict adherence to certification standards and appropriate cold chain logistics where necessary to ensure product integrity. All delivered materials must meet established quality and regulatory benchmarks, with shipping protocols tailored to maintain stability and efficacy throughout transit. The solicitation is classified as a subcontract under NAICS code 424690, issued by the National Institutes of Health under the Department of Health and Human Services, with a response deadline of August 24, 2026. No specific geographic performance location or point of contact is provided, and the opportunity is not set aside for any particular small business category.

National Institutes Of Health Olao

POSTED

DEADLINE

Annual supply of chemicals for WPP

Solicitation # midlandtexas-868

The City of Midland, Texas is soliciting bids for the annual supply of chemicals used by its water purification system, under solicitation number midlandtexas-868. The opportunity is open to qualified suppliers and is not set aside for any specific group, with no NAICS code specified. All interested parties must submit responses by the closing deadline of August 27, 2026, at 2:00 PM Central Time, following the publication date of August 8, 2026. Bids can be reviewed or obtained through the City’s Bonfire module or by contacting the purchasing department via email at purchasing@midlandtexas.gov. The contract is managed by the City of Midland’s local government agency, with performance expected to occur within the jurisdictional boundaries of the city. Detailed bid information and submission guidelines are accessible via the official webpage linked in the solicitation.

City of Midland

POSTED

DEADLINE

DEC Emission System ReAgent

Solicitation # 9120

The City of Denton is seeking qualified individuals or businesses to contract for the provision of DEC Emission System ReAgent under Solicitation Number 9120, with responses due by 8:00 PM CST on Wednesday, August 26, 2026. Submissions must be made exclusively via IONWAVE or as a hard copy; email submissions are not accepted. All inquiries must also be submitted through IONWAVE by the deadline, with no phone calls or emails permitted. A public opening of proposals will occur on the same day at 2:45 PM CST at the Development Services Center Training Room One, 401 N. Elm St, Denton, TX, with a virtual attendance option available via a secure meeting link and passcode. Applicants must demonstrate substantial experience delivering innovative, cost-effective solutions for municipal needs and have a proven ability to fulfill all service requirements. Responses may cover one or more product categories outlined in the solicitation, and the City reserves the right to consider interlocal cooperative agreements or existing state and federal contracts to achieve the best value. The primary point of contact for questions is Christa Christian, CPPB, reachable by phone at 940-349-7100 or email at [email protected].

POSTED

DEADLINE

IFB 5-2026 High Purity Glycerin

Solicitation # IFB-125968

The Town of Front Royal is seeking sealed bids to furnish and deliver High Purity Glycerin for use in its Wastewater Treatment Plant, under Solicitation Number IFB-125968. The request, titled IFB 5-2026 High Purity Glycerin, was posted on August 7, 2026, with bids due by 3:00 PM on August 25, 2026. Vendors must be qualified and responsible, and all submissions must comply with the stated requirements for product purity and delivery to the Wastewater Treatment Plant located in Front Royal, Virginia. The contract is issued by the Town of Front Royal under its state government classification, with no specific set-aside provisions or NAICS code indicated. All inquiries and communications should be directed to Michelle Campbell, the designated point of contact, via email at mcampbell@frontroyalva.com or by phone at 540-631-2735. Bidders are expected to review the full solicitation details through the provided vendor portal link, as additional specifications for product quality, packaging, labeling, and delivery schedules may be outlined there. Performance of the contract will occur entirely at the Town’s Wastewater Treatment Plant in Front Royal, Virginia, and vendors must ensure timely and compliant delivery to meet operational needs.

Town of Front Royal

POSTED

DEADLINE

Automotive Brake Fluid SupplyThe contract pertains to the supply and delivery of 12 boxes of automotive brake fluid identified by NSN 9150016563040 to Camp Kinser in Japan, with all materials required to meet established military specifications. The delivery is managed under a subcontract awarded by the Defense Logistics Agency, a component of the Department of Defense, ensuring compliance with federal procurement standards for military-grade fluid. The product must be delivered in full and in accordance with defined logistical and quality requirements to support operational readiness at the designated location. The contract was posted on August 7, 2026, and is classified under NAICS code 424690, which corresponds to wholesale trade of automotive parts and supplies. While specific delivery timelines and payment terms are not detailed here, the contract is tracked through the DIBBS system under award number SPE4AX16D9008 and delivery order SPE4A726FZ978, indicating formal procurement and tracking mechanisms are in place. The performance location is explicitly tied to Camp Kinser, Japan, and the vendor must ensure that all units are properly packaged, labeled, and transported to meet military transport and storage protocols.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Packaging & Shipment Preparation for Military LogisticsThe contract requires the packaging and staging of military shipments in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring all materials are properly labeled, secured, and documented for transit. Work must be performed to meet rigorous Department of Defense logistics protocols, with all shipments destined for Tinker AFB at zip code 73145-8000. The subcontract is categorized under NAICS code 493190, indicating it involves warehousing and storage services tied to transportation support. The request for quotation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance must adhere strictly to federal military packaging directives to ensure readiness and interoperability within the defense supply chain.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Handling & Labeling ComplianceThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the proper labeling of hazardous materials, ensuring all chemical substances are accurately identified and marked with compliant hazard warnings. The contractor must assess materials subject to additional regulatory frameworks beyond OSHA, and submit revised or new labels that meet all applicable federal requirements, including those under alternative statutes. This work is critical to maintaining safety and regulatory alignment within Department of Defense operations, particularly at Tinker Air Force Base, where the performance is mandated to take place. The subcontract falls under NAICS code 541690 and was posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting entity is the ASC Commissions Division under the Department of Defense, and all deliverables must be submitted through the designated DIBBS system. While no specific set-aside type is indicated, the work emphasizes strict adherence to federal safety and labeling protocols, making technical accuracy and regulatory knowledge essential qualifications for successful performance. Failure to comply with labeling standards could jeopardize operational safety and contractual obligations.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Supply of Roller Bearing Retainer (NSN: 3110011837133)Six units of the RETAINER ROLLER BEARING with NSN 3110011837133 are to be supplied and delivered to the DLA Distribution Depot located at Tinker Air Force Base in Oklahoma, with a delivery destination zip code of 73145-8000. The requirement is issued under a subcontract classification with a NAICS code of 332999 and is managed by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 9, 2026, and responses must be submitted no later than August 17, 2026. All deliveries must meet specified technical requirements for the bearing retainer and be routed to the designated military logistics hub to support defense operations. The procurement is part of routine maintenance and supply chain replenishment efforts, and full compliance with federal acquisition standards is expected.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

PIN-RIVET Supply (NSN: 5320-01-728-9327)Fifty units of PIN-RIVET with part number HL1050PB6-6 and NSN 5320-01-728-9327 are to be supplied under a subcontract to meet Department of Defense specifications, ensuring full compliance with DLA quality, packaging, and delivery requirements. Each unit must undergo zero-defect inspection and be labeled according to MIL-STD-129 standards, with all deliveries made FOB Origin to Fort Carson, Colorado, with the final destination zip code 80913-4104. The work is governed by NAICS code 332722 and falls under the oversight of the ASC COMMODITIES DIVISION. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and the contract is to be executed through the DIBBS platform.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Defense Logistics Invoicing and WAWF Compliance SupportThis contract requires the preparation and electronic submission of invoices and receiving reports through the Wide Area WorkFlow system to meet strict Defense Federal Acquisition Regulation Supplement requirements for fixed-price delivery contracts. Specifically, it mandates full compliance with DFARS 252.232-7003 and 252.232-7006, ensuring accurate, timely, and secure digital documentation that aligns with Department of Defense invoice processing standards. The work is tied to the delivery of goods under a fixed-price arrangement, placing emphasis on procedural accuracy and adherence to federal electronic data interchange protocols. The contract is issued as a subcontract under the ASC Commodities Division of the Department of Defense, with performance designated to take place in Cherry Point, North Carolina, at the zip code 28533-5040. It was posted on August 9, 2026, with responses due by August 17, 2026, and falls under the NAICS code 541211 for accounting, audit, and bookkeeping services. The solicitation is managed through the DIBBS platform, and while no point of contact or set-aside details are provided, the focus remains fully on operational compliance with electronic invoicing systems mandated for defense logistics.

Offices of Certified Public Accountants

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection of PIN-RIVETs using military-standard sampling plans specified in MIL-STD-1916 or ASQ H1331, with acceptance quality level validation to ensure compliance with defined quality thresholds. Defect classification must adhere strictly to established military standards, ensuring consistent identification and categorization of non-conformances. The work is scoped under a subcontract for Quality Assurance and Inspection Services, with performance taking place at Cherry Point, North Carolina, 28533-5040. The North American Industry Classification System code 541330 indicates the nature of the services as engineering and technical consulting. This solicitation, issued by the ASC Commodities Division under the Department of Defense, is open for responses until August 17, 2026, with proposals submitted through the DIBBS system.

Engineering Services

POSTED

about 8 hours ago

DEADLINE