Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Automotive Brake Fluid Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply and delivery of 12 boxes of automotive brake fluid identified by NSN 9150016563040 to Camp Kinser in Japan, with all materials required to meet established military specifications. The delivery is managed under a subcontract awarded by the Defense Logistics Agency, a component of the Department of Defense, ensuring compliance with federal procurement standards for military-grade fluid. The product must be delivered in full and in accordance with defined logistical and quality requirements to support operational readiness at the designated location. The contract was posted on August 7, 2026, and is classified under NAICS code 424690, which corresponds to wholesale trade of automotive parts and supplies. While specific delivery timelines and payment terms are not detailed here, the contract is tracked through the DIBBS system under award number SPE4AX16D9008 and delivery order SPE4A726FZ978, indicating formal procurement and tracking mechanisms are in place. The performance location is explicitly tied to Camp Kinser, Japan, and the vendor must ensure that all units are properly packaged, labeled, and transported to meet military transport and storage protocols.

General Info

Supply 12 boxes of military-spec brake fluid to Camp Kinser, Japan, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

424690 - Other Chemical and Allied Products Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 12 boxes of automotive brake fluid (NSN: 9150016563040) to Camp Kinser, Japan, compliant with military specifications and delivery terms.

Similar Contracts

Same NAICS industry code

Specialized Reagent and Inhibitor SupplyThe contract pertains to the supply of commercially available NNMT inhibitors or associated biochemical reagents, requiring strict adherence to certification standards and appropriate cold chain logistics where necessary to ensure product integrity. All delivered materials must meet established quality and regulatory benchmarks, with shipping protocols tailored to maintain stability and efficacy throughout transit. The solicitation is classified as a subcontract under NAICS code 424690, issued by the National Institutes of Health under the Department of Health and Human Services, with a response deadline of August 24, 2026. No specific geographic performance location or point of contact is provided, and the opportunity is not set aside for any particular small business category.

National Institutes Of Health Olao

POSTED

DEADLINE

Annual supply of chemicals for WPP

Solicitation # midlandtexas-868

The City of Midland, Texas is soliciting bids for the annual supply of chemicals used by its water purification system, under solicitation number midlandtexas-868. The opportunity is open to qualified suppliers and is not set aside for any specific group, with no NAICS code specified. All interested parties must submit responses by the closing deadline of August 27, 2026, at 2:00 PM Central Time, following the publication date of August 8, 2026. Bids can be reviewed or obtained through the City’s Bonfire module or by contacting the purchasing department via email at purchasing@midlandtexas.gov. The contract is managed by the City of Midland’s local government agency, with performance expected to occur within the jurisdictional boundaries of the city. Detailed bid information and submission guidelines are accessible via the official webpage linked in the solicitation.

City of Midland

POSTED

DEADLINE

DEC Emission System ReAgent

Solicitation # 9120

The City of Denton is seeking qualified individuals or businesses to contract for the provision of DEC Emission System ReAgent under Solicitation Number 9120, with responses due by 8:00 PM CST on Wednesday, August 26, 2026. Submissions must be made exclusively via IONWAVE or as a hard copy; email submissions are not accepted. All inquiries must also be submitted through IONWAVE by the deadline, with no phone calls or emails permitted. A public opening of proposals will occur on the same day at 2:45 PM CST at the Development Services Center Training Room One, 401 N. Elm St, Denton, TX, with a virtual attendance option available via a secure meeting link and passcode. Applicants must demonstrate substantial experience delivering innovative, cost-effective solutions for municipal needs and have a proven ability to fulfill all service requirements. Responses may cover one or more product categories outlined in the solicitation, and the City reserves the right to consider interlocal cooperative agreements or existing state and federal contracts to achieve the best value. The primary point of contact for questions is Christa Christian, CPPB, reachable by phone at 940-349-7100 or email at [email protected].

POSTED

DEADLINE

IFB 5-2026 High Purity Glycerin

Solicitation # IFB-125968

The Town of Front Royal is seeking sealed bids to furnish and deliver High Purity Glycerin for use in its Wastewater Treatment Plant, under Solicitation Number IFB-125968. The request, titled IFB 5-2026 High Purity Glycerin, was posted on August 7, 2026, with bids due by 3:00 PM on August 25, 2026. Vendors must be qualified and responsible, and all submissions must comply with the stated requirements for product purity and delivery to the Wastewater Treatment Plant located in Front Royal, Virginia. The contract is issued by the Town of Front Royal under its state government classification, with no specific set-aside provisions or NAICS code indicated. All inquiries and communications should be directed to Michelle Campbell, the designated point of contact, via email at mcampbell@frontroyalva.com or by phone at 540-631-2735. Bidders are expected to review the full solicitation details through the provided vendor portal link, as additional specifications for product quality, packaging, labeling, and delivery schedules may be outlined there. Performance of the contract will occur entirely at the Town’s Wastewater Treatment Plant in Front Royal, Virginia, and vendors must ensure timely and compliant delivery to meet operational needs.

Town of Front Royal

POSTED

DEADLINE

Shelf Life and Expiration Compliance ManagementThe contract requires strict adherence to shelf life and expiration standards for battery deliveries as outlined in DLA RS011, ensuring all units are delivered within the mandated operational window to maintain military readiness and safety. Full traceability and comprehensive documentation must accompany every shipment, verifying origin, handling, storage conditions, and expiration dates to guarantee compliance and accountability throughout the supply chain. The subcontract is issued under NAICS code 424690 by the Defense Logistics Agency under the Department of Defense, with performance expected to meet federal defense procurement standards despite unspecified delivery locations. The solicitation, posted on August 7, 2026, is part of an ongoing DLA procurement effort to secure reliable battery supply chain integrity.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Adhesive SupplyThe contract involves the supply and delivery of one unit of commercial adhesive designated by NSN 8040011652363 to Soto Cano Air Base in Honduras, under FOB destination terms, meaning the seller assumes all costs and risks until the goods arrive at the specified destination. The shipment must include traceable logistics with proper labeling and marking to ensure accurate receipt and accountability upon delivery. This is a subcontract awarded under a procurement by the Defense Logistics Agency, part of the Department of Defense, with the North American Industry Classification System code 424690, indicating it relates to wholesale trade of miscellaneous durable goods. The solicitation was posted on August 7, 2026, and the contract is linked to the award record SPE8ES26F77SJ under the master contract SPE8ES24D0005, ensuring alignment with government procurement protocols and compliance standards.

Defense Logistics Agency

POSTED

DEADLINE

Whiteboard Cleaner SupplyThe contract seeks the supply of whiteboard cleaner or conditioner in liquid or spray form that meets federal packaging standards, ensuring safe handling, labeling, and environmental compliance. It is categorized as a subcontract under the NAICS code 424690, which pertains to other miscellaneous nondurable goods merchant wholesalers, and is managed by the Defense Logistics Agency under the Department of Defense. The opportunity was posted on August 7, 2026, with no specified set-aside designation or geographic restrictions for performance, indicating broad eligibility for qualified vendors. The contract is linked to a specific award with identifiers SPE8EZ21D0012 and SPE8EJ26F083N, suggesting it serves an existing procurement framework to replenish or maintain supplies for military or federal facility operations. No point of contact or physical delivery location is provided, implying logistical coordination will be handled through the agency’s standard distribution channels.

Defense Logistics Agency

POSTED

DEADLINE

Corrosion Preventive Material SupplyThe contract entails the procurement and delivery of five containers of military-grade corrosion preventive material, identified by NSN 8030001180666, to a naval vessel stationed at a foreign port. Delivery must be completed via traceable freight under FOB destination terms, meaning the supplier retains responsibility for all costs and risks until the material arrives at the designated destination. The delivery deadline is firmly set for August 28, 2026, with no flexibility indicated. The material is critical for maintaining the operational readiness of naval assets by preventing degradation from environmental exposure. The contract is classified as a subcontract under NAICS code 424690, administered by the Defense Logistics Agency on behalf of the Department of Defense. While the exact port and vessel details are not specified, the requirement for traceable freight ensures full accountability throughout the logistics chain. The supplier must comply with all military specifications for the corrosion preventive material and ensure timely arrival to support fleet maintenance schedules.

Defense Logistics Agency

POSTED

DEADLINE

Automotive Brake Fluid Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Supply of Brake Parts Cleaner (Chemical Product)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Military-Grade Sealing Compound (NSN 8030000087198)The contract requires the supply and delivery of 2,000 kilograms of a military-grade sealing compound identified by NSN 8030000087198, to be delivered to Patuxent River, Maryland, under FOB Destination terms, meaning the seller assumes all costs and risks until the goods reach the designated delivery point. Inspection of the compound will occur upon arrival at the delivery location to ensure compliance with military specifications. The contract is classified as a subcontract under NAICS code 424690 and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The award was posted on August 7, 2026, and details can be accessed through the DIBBS system using the referenced contract and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

Domestic Material Sourcing & Country of Origin ComplianceThis contract requires the supply of raw materials that fully comply with the Trade Agreements Act and the Berry Amendment, ensuring all materials are sourced from eligible countries and meet strict domestic content requirements. Full and accurate country of origin documentation must be provided for every component to verify compliance, with no exceptions or waivers permitted. The subcontract is tied to the Department of Defense’s Strategic Acquisition Program Directorate and falls under NAICS code 424690, indicating it relates to wholesale trade of miscellaneous durable goods, likely supporting defense-related manufacturing. Bidders must respond by the deadline of September 7, 2026, and performance is expected to support U.S. government defense programs requiring assured domestic or allied-source supply chains.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

DEADLINE