Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, CHECK

Active
SPE7MC-26-T-187YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

General Info

One steel body check valve with stainless steel trim, 150 psi, 180°F, flanged, 4.12 inches, DLA compliant, delivered FOB origin by Aug 3, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

1260 SNOW POINTE ROAD, GOOSE CREEK, SC, 29445-8612, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-187Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,CHECK
VALVE, CHECK. 2.00 IPS. (STEEL BODY). STAINLESS STEEL TRIM. MAXIMUM
OPERATING PRESSURE 150 PSI. TEMPERATURE 180 DEGREES F. FLANGE TYPE END
CONNECTIONS. END TO END-4.12 INCHES NOMINAL. Exception: Valve Body made from Bar Stock ASTM A36 Alloy AISI 1018 instead of the original cast material is acceptable.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
ADMIRAL VALVE LLC 99565 P/N 110D
ADMIRAL VALVE LLC 99565 P/N C-9976
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7MC-26-T-187Y
SECTION B
PR: 7017677476 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017677476 0001 EA 1.000
NSN/MATERIAL:4820011788809
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N50467
NUCLEAR POWER TRAINING UNI
1260 SNOW POINTE ROAD
GOOSE CREEK SC 29445-8612
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N50467
NUCLEAR POWER TRAINING UNI
1260 SNOW POINTE ROAD
GOOSE CREEK SC 29445-8612
US
M/F: (TCN) N5046762093542
RDD:
PROJ: Z5E TP 2
SUPP ADD: YU0672 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: E9B ADV: FC: U4
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7MC-26-T-187Y
SECTION B
PR: 7017677476 PRLI: 0001 CONT’D

SPE7MC-26-T-187Y NSN/Part Number: 4820-01-178-8809 Quantity: 1 EA Purchase Request: 7017677476QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
DECK BOX OPERATOR, V
Solicitation # SPE7MC-26-T-186P
The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-186G
The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-187B
The contract specifies the procurement of a check valve with a set pressure of 3000 psi plus or minus 200 psi and a maximum operating temperature of 180 degrees Fahrenheit, designated as a critical application item with OSHKOSH DEFENSE LLC part number 8KK352 and NSN 4820012316654. The item must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting standards such as ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited in or on the valve except for specific functional uses like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable devices containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following RP001 DLA Packaging Requirements, and the unit of issue is each (EA) with a total quantity of 202 units required at a unit price of $202.000, totaling $40,804. Delivery is FOB origin and must occur within 188 days from the contract date, with a required ship date of February 25, 2027, and original delivery deadline of April 15, 2027. Inspection and acceptance both occur at the destination, and the contract enforces a zero variance tolerance on quantity. Shipping and delivery instructions direct all items to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures are governed by DLAD Proc Notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-186N
The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
MODULE HYDRAULIC
Solicitation # SPE7MC-26-T-187X
The contract is for the procurement of five hydraulic modules identified by NSN 4820-01-672-7782 under solicitation SPE7MC-26-T-187X, with a response deadline of August 20, 2026, and a delivery requirement of 578 days after order. The acquisition is a total small business set-aside under NAICS code 332911, managed by the Department of Defense through the DDSP New Cumberland Facility. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Export control regulations apply to technical data associated with this item, subject to ITAR or EAR restrictions, prohibiting unauthorized disclosure to foreign persons regardless of location. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and obtain prior approval from DLA to access controlled technical data. DFARS 252.225-7048 governs compliance with these export controls, and government identification must be removed from non-accepted supplies. Primary point of contact for inquiries is Paula McClary, reachable at fmda3302@dla.mil or 614-692-0417.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7MC-26-T-187T
The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ANGLE
Solicitation # SPE7MC-26-T-186V
The contract pertains to the procurement of a valve, angle, with NSN 4820-01-430-2762 and part number VA409443, under solicitation SPE7MC-26-T-186V, which is a Service-Disabled Veteran-Owned Small Business Set-Aside. The quantity required is 113 units, each priced at $113.00, for a total contract value of $12,769.00. Delivery is mandated FOB origin with a lead time of 165 days from the original required delivery date of May 18, 2027, and a need ship date of February 2, 2027. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and labeled in accordance with MIL-STD-129 with no special marking required. Inspection and acceptance occur at the destination, and quantities are fixed with zero variance allowed. All packaging and palletization must conform to DLA’s packaging requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the applicable revision of that list is determined by the solicitation issue date. The contracting office is the Department of Defense, managed by the DDSP New Cumberland Facility, with Paula McCLary as the primary point of contact, reachable via email and phone. The contract was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332911 for federal procurement.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RELIEF, PRESSU
Solicitation # SPE7MC-26-T-187D
The contract pertains to the procurement of a pressure relief valve identified by NSN 4820015904810 and part number HSRV-12-150, with a quantity of nine units to be delivered within 84 days from the contract date. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in the quantity ordered. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific methods for packaging, cushioning, and marking in accordance with MIL-STD-129, with no special marking required. Packaging must also adhere to palletization standards outlined in DLA’s procurement guidelines, and all shipments must be sent to the designated receiving warehouse in Tracy, California. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the valve or its components, with exceptions only for functional uses in batteries, lighting, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The solicitation, issued under number SPE7MC-26-T-187D, was released on August 9, 2026, with responses due by August 20, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 332911. The contracting activity is the DLA District San Joaquin under the Department of Defense, with Chad Zernis listed as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
RETAINER, DISK, VALVE
Solicitation # SPE7M0-26-T-034B
The contract pertains to the procurement of one unit of a RETAINER, DISK, VALVE identified by NSN 4810-01-398-8156 and part number A07057.001.156 from Emerson Automation Solutions, classified as a critical application item. Delivery is required within five days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA’s packaging standards. The item must be physically identified in accordance with MIL-STD-130, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for approved functional uses like batteries, lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof construction and secondary containment as specified by NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The sole delivery address is DLA Distribution San Diego, and shipment must be made by the fastest traceable means, explicitly prohibiting parcel post. The required delivery date is August 6, 2026, and the contract is issued under solicitation SPE7M0-26-T-034B, with a unit price of $1.00 and no variance allowed in quantity.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-186H
A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
TAILPIECE, VALVE
Solicitation # SPE7MC-26-T-187A
The contract pertains to the procurement of two TAILPIECE, VALVE units with NSN 4820-01-736-4761, under solicitation SPE7MC-26-T-187A, which is a total small business set-aside under NAICS code 332911. Delivery is required within 165 days from award, and the solicitation closed on August 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R-numbers such as RP001 for packaging, RQ009 for inspection at origin, RQ006 for quality conformance, and RT001 for measuring equipment. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the item is subject to export control under ITAR or EAR, with strict restrictions on disclosure to foreign persons regardless of location. Access to controlled technical data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and received explicit authorization. The contract includes CDRL RD002 for covered defense information and RD004 for cybersecurity compliance, and DFARS 252.225-7048 enforces compliance with export regulations. All data and performance are tied to the DLA New Cumberland facility with a delivery point in zip 17070-5002, and primary point of contact is Paula McClary via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-186E
The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 333415
New
DIBBS
AIR CONDITIONER
Solicitation # SPE8E8-26-T-5113
The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-4163
This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.
Sign Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 325510
New
DIBBS
COATING KIT, RAIN ER
Solicitation # SPE8ES-26-T-2548
The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.
Paint and Coating Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
HARNESS ASSEMBLY, MASK,
Solicitation # SPE8E6-26-T-4162
The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.
Surgical Appliance and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2546
This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.
Adhesive Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7MC-26-T-186M
The contract pertains to the procurement of 58 helical compression springs identified by NSN 5360-00-514-4470, issued under solicitation SPE7MC-26-T-186M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and delivery is required within 165 days after award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All supplies must comply with strict prohibitions on mercury and mercury-containing compounds, which cannot be intentionally added or come in direct contact with the hardware, except for specific approved uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and performance is to occur in Greensboro, North Carolina, with primary point of contact Nicole Betts reachable via email and phone provided.
Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details